This source file includes following definitions.
- zorro7xx_init_one
- zorro7xx_remove_one
- zorro7xx_scsi_init
- zorro7xx_scsi_exit
1
2
3
4
5
6
7
8
9
10
11
12
13 #include <linux/module.h>
14 #include <linux/init.h>
15 #include <linux/interrupt.h>
16 #include <linux/zorro.h>
17 #include <linux/slab.h>
18
19 #include <asm/amigahw.h>
20 #include <asm/amigaints.h>
21
22 #include <scsi/scsi_host.h>
23 #include <scsi/scsi_transport_spi.h>
24
25 #include "53c700.h"
26
27 MODULE_AUTHOR("Alan Hourihane <alanh@fairlite.demon.co.uk> / Kars de Jong <jongk@linux-m68k.org>");
28 MODULE_DESCRIPTION("Amiga Zorro NCR53C710 driver");
29 MODULE_LICENSE("GPL");
30
31
32 static struct scsi_host_template zorro7xx_scsi_driver_template = {
33 .proc_name = "zorro7xx",
34 .this_id = 7,
35 .module = THIS_MODULE,
36 };
37
38 static struct zorro_driver_data {
39 const char *name;
40 unsigned long offset;
41 int absolute;
42 } zorro7xx_driver_data[] = {
43 { .name = "PowerUP 603e+", .offset = 0xf40000, .absolute = 1 },
44 { .name = "WarpEngine 40xx", .offset = 0x40000 },
45 { .name = "A4091", .offset = 0x800000 },
46 { .name = "GForce 040/060", .offset = 0x40000 },
47 { 0 }
48 };
49
50 static struct zorro_device_id zorro7xx_zorro_tbl[] = {
51 {
52 .id = ZORRO_PROD_PHASE5_BLIZZARD_603E_PLUS,
53 .driver_data = (unsigned long)&zorro7xx_driver_data[0],
54 },
55 {
56 .id = ZORRO_PROD_MACROSYSTEMS_WARP_ENGINE_40xx,
57 .driver_data = (unsigned long)&zorro7xx_driver_data[1],
58 },
59 {
60 .id = ZORRO_PROD_CBM_A4091_1,
61 .driver_data = (unsigned long)&zorro7xx_driver_data[2],
62 },
63 {
64 .id = ZORRO_PROD_CBM_A4091_2,
65 .driver_data = (unsigned long)&zorro7xx_driver_data[2],
66 },
67 {
68 .id = ZORRO_PROD_GVP_GFORCE_040_060,
69 .driver_data = (unsigned long)&zorro7xx_driver_data[3],
70 },
71 { 0 }
72 };
73 MODULE_DEVICE_TABLE(zorro, zorro7xx_zorro_tbl);
74
75 static int zorro7xx_init_one(struct zorro_dev *z,
76 const struct zorro_device_id *ent)
77 {
78 struct Scsi_Host *host;
79 struct NCR_700_Host_Parameters *hostdata;
80 struct zorro_driver_data *zdd;
81 unsigned long board, ioaddr;
82
83 board = zorro_resource_start(z);
84 zdd = (struct zorro_driver_data *)ent->driver_data;
85
86 if (zdd->absolute) {
87 ioaddr = zdd->offset;
88 } else {
89 ioaddr = board + zdd->offset;
90 }
91
92 if (!zorro_request_device(z, zdd->name)) {
93 printk(KERN_ERR "zorro7xx: cannot reserve region 0x%lx, abort\n",
94 board);
95 return -EBUSY;
96 }
97
98 hostdata = kzalloc(sizeof(struct NCR_700_Host_Parameters), GFP_KERNEL);
99 if (!hostdata) {
100 printk(KERN_ERR "zorro7xx: Failed to allocate host data\n");
101 goto out_release;
102 }
103
104
105 if (ioaddr > 0x01000000)
106 hostdata->base = ioremap(ioaddr, zorro_resource_len(z));
107 else
108 hostdata->base = ZTWO_VADDR(ioaddr);
109
110 hostdata->clock = 50;
111 hostdata->chip710 = 1;
112
113
114 hostdata->ctest7_extra = CTEST7_TT1;
115
116 zorro7xx_scsi_driver_template.name = zdd->name;
117
118
119 host = NCR_700_detect(&zorro7xx_scsi_driver_template, hostdata,
120 &z->dev);
121 if (!host) {
122 printk(KERN_ERR "zorro7xx: No host detected; "
123 "board configuration problem?\n");
124 goto out_free;
125 }
126
127 host->this_id = 7;
128 host->base = ioaddr;
129 host->irq = IRQ_AMIGA_PORTS;
130
131 if (request_irq(host->irq, NCR_700_intr, IRQF_SHARED, "zorro7xx-scsi",
132 host)) {
133 printk(KERN_ERR "zorro7xx: request_irq failed\n");
134 goto out_put_host;
135 }
136
137 zorro_set_drvdata(z, host);
138 scsi_scan_host(host);
139
140 return 0;
141
142 out_put_host:
143 scsi_host_put(host);
144 out_free:
145 if (ioaddr > 0x01000000)
146 iounmap(hostdata->base);
147 kfree(hostdata);
148 out_release:
149 zorro_release_device(z);
150
151 return -ENODEV;
152 }
153
154 static void zorro7xx_remove_one(struct zorro_dev *z)
155 {
156 struct Scsi_Host *host = zorro_get_drvdata(z);
157 struct NCR_700_Host_Parameters *hostdata = shost_priv(host);
158
159 scsi_remove_host(host);
160
161 NCR_700_release(host);
162 kfree(hostdata);
163 free_irq(host->irq, host);
164 zorro_release_device(z);
165 }
166
167 static struct zorro_driver zorro7xx_driver = {
168 .name = "zorro7xx-scsi",
169 .id_table = zorro7xx_zorro_tbl,
170 .probe = zorro7xx_init_one,
171 .remove = zorro7xx_remove_one,
172 };
173
174 static int __init zorro7xx_scsi_init(void)
175 {
176 return zorro_register_driver(&zorro7xx_driver);
177 }
178
179 static void __exit zorro7xx_scsi_exit(void)
180 {
181 zorro_unregister_driver(&zorro7xx_driver);
182 }
183
184 module_init(zorro7xx_scsi_init);
185 module_exit(zorro7xx_scsi_exit);