drivers/input/mouse/elantech.h

/* [<][>][^][v][top][bottom][index][help] */
This source file includes following definitions.
elantech_init
   1 /* SPDX-License-Identifier: GPL-2.0-only */
   2 /*
   3  * Elantech Touchpad driver (v6)
   4  *
   5  * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net>
   6  *
   7  * Trademarks are the property of their respective owners.
   8  */
   9 
  10 #ifndef _ELANTECH_H
  11 #define _ELANTECH_H
  12 
  13 /*
  14  * Command values for Synaptics style queries
  15  */
  16 #define ETP_FW_ID_QUERY                 0x00
  17 #define ETP_FW_VERSION_QUERY            0x01
  18 #define ETP_CAPABILITIES_QUERY          0x02
  19 #define ETP_SAMPLE_QUERY                0x03
  20 #define ETP_RESOLUTION_QUERY            0x04
  21 
  22 /*
  23  * Command values for register reading or writing
  24  */
  25 #define ETP_REGISTER_READ               0x10
  26 #define ETP_REGISTER_WRITE              0x11
  27 #define ETP_REGISTER_READWRITE          0x00
  28 
  29 /*
  30  * Hardware version 2 custom PS/2 command value
  31  */
  32 #define ETP_PS2_CUSTOM_COMMAND          0xf8
  33 
  34 /*
  35  * Times to retry a ps2_command and millisecond delay between tries
  36  */
  37 #define ETP_PS2_COMMAND_TRIES           3
  38 #define ETP_PS2_COMMAND_DELAY           500
  39 
  40 /*
  41  * Times to try to read back a register and millisecond delay between tries
  42  */
  43 #define ETP_READ_BACK_TRIES             5
  44 #define ETP_READ_BACK_DELAY             2000
  45 
  46 /*
  47  * Register bitmasks for hardware version 1
  48  */
  49 #define ETP_R10_ABSOLUTE_MODE           0x04
  50 #define ETP_R11_4_BYTE_MODE             0x02
  51 
  52 /*
  53  * Capability bitmasks
  54  */
  55 #define ETP_CAP_HAS_ROCKER              0x04
  56 
  57 /*
  58  * One hard to find application note states that X axis range is 0 to 576
  59  * and Y axis range is 0 to 384 for harware version 1.
  60  * Edge fuzz might be necessary because of bezel around the touchpad
  61  */
  62 #define ETP_EDGE_FUZZ_V1                32
  63 
  64 #define ETP_XMIN_V1                     (  0 + ETP_EDGE_FUZZ_V1)
  65 #define ETP_XMAX_V1                     (576 - ETP_EDGE_FUZZ_V1)
  66 #define ETP_YMIN_V1                     (  0 + ETP_EDGE_FUZZ_V1)
  67 #define ETP_YMAX_V1                     (384 - ETP_EDGE_FUZZ_V1)
  68 
  69 /*
  70  * The resolution for older v2 hardware doubled.
  71  * (newer v2's firmware provides command so we can query)
  72  */
  73 #define ETP_XMIN_V2                     0
  74 #define ETP_XMAX_V2                     1152
  75 #define ETP_YMIN_V2                     0
  76 #define ETP_YMAX_V2                     768
  77 
  78 #define ETP_PMIN_V2                     0
  79 #define ETP_PMAX_V2                     255
  80 #define ETP_WMIN_V2                     0
  81 #define ETP_WMAX_V2                     15
  82 
  83 /*
  84  * v3 hardware has 2 kinds of packet types,
  85  * v4 hardware has 3.
  86  */
  87 #define PACKET_UNKNOWN                  0x01
  88 #define PACKET_DEBOUNCE                 0x02
  89 #define PACKET_V3_HEAD                  0x03
  90 #define PACKET_V3_TAIL                  0x04
  91 #define PACKET_V4_HEAD                  0x05
  92 #define PACKET_V4_MOTION                0x06
  93 #define PACKET_V4_STATUS                0x07
  94 #define PACKET_TRACKPOINT               0x08
  95 
  96 /*
  97  * track up to 5 fingers for v4 hardware
  98  */
  99 #define ETP_MAX_FINGERS                 5
 100 
 101 /*
 102  * weight value for v4 hardware
 103  */
 104 #define ETP_WEIGHT_VALUE                5
 105 
 106 /*
 107  * Bus information on 3rd byte of query ETP_RESOLUTION_QUERY(0x04)
 108  */
 109 #define ETP_BUS_PS2_ONLY                0
 110 #define ETP_BUS_SMB_ALERT_ONLY          1
 111 #define ETP_BUS_SMB_HST_NTFY_ONLY       2
 112 #define ETP_BUS_PS2_SMB_ALERT           3
 113 #define ETP_BUS_PS2_SMB_HST_NTFY        4
 114 
 115 /*
 116  * New ICs are either using SMBus Host Notify or just plain PS2.
 117  *
 118  * ETP_FW_VERSION_QUERY is:
 119  * Byte 1:
 120  *  - bit 0..3: IC BODY
 121  * Byte 2:
 122  *  - bit 4: HiddenButton
 123  *  - bit 5: PS2_SMBUS_NOTIFY
 124  *  - bit 6: PS2CRCCheck
 125  */
 126 #define ETP_NEW_IC_SMBUS_HOST_NOTIFY(fw_version)        \
 127                 ((((fw_version) & 0x0f2000) == 0x0f2000) && \
 128                  ((fw_version) & 0x0000ff) > 0)
 129 
 130 /*
 131  * The base position for one finger, v4 hardware
 132  */
 133 struct finger_pos {
 134         unsigned int x;
 135         unsigned int y;
 136 };
 137 
 138 struct elantech_device_info {
 139         unsigned char capabilities[3];
 140         unsigned char samples[3];
 141         unsigned char debug;
 142         unsigned char hw_version;
 143         unsigned int fw_version;
 144         unsigned int x_min;
 145         unsigned int y_min;
 146         unsigned int x_max;
 147         unsigned int y_max;
 148         unsigned int x_res;
 149         unsigned int y_res;
 150         unsigned int x_traces;
 151         unsigned int y_traces;
 152         unsigned int width;
 153         unsigned int bus;
 154         bool paritycheck;
 155         bool jumpy_cursor;
 156         bool reports_pressure;
 157         bool crc_enabled;
 158         bool set_hw_resolution;
 159         bool has_trackpoint;
 160         bool has_middle_button;
 161         int (*send_cmd)(struct psmouse *psmouse, unsigned char c,
 162                         unsigned char *param);
 163 };
 164 
 165 struct elantech_data {
 166         struct input_dev *tp_dev;       /* Relative device for trackpoint */
 167         char tp_phys[32];
 168         unsigned char reg_07;
 169         unsigned char reg_10;
 170         unsigned char reg_11;
 171         unsigned char reg_20;
 172         unsigned char reg_21;
 173         unsigned char reg_22;
 174         unsigned char reg_23;
 175         unsigned char reg_24;
 176         unsigned char reg_25;
 177         unsigned char reg_26;
 178         unsigned int single_finger_reports;
 179         unsigned int y_max;
 180         unsigned int width;
 181         struct finger_pos mt[ETP_MAX_FINGERS];
 182         unsigned char parity[256];
 183         struct elantech_device_info info;
 184         void (*original_set_rate)(struct psmouse *psmouse, unsigned int rate);
 185 };
 186 
 187 int elantech_detect(struct psmouse *psmouse, bool set_properties);
 188 int elantech_init_ps2(struct psmouse *psmouse);
 189 
 190 #ifdef CONFIG_MOUSE_PS2_ELANTECH
 191 int elantech_init(struct psmouse *psmouse);
 192 #else
 193 static inline int elantech_init(struct psmouse *psmouse)
 194 {
 195         return -ENOSYS;
 196 }
 197 #endif /* CONFIG_MOUSE_PS2_ELANTECH */
 198 
 199 int elantech_init_smbus(struct psmouse *psmouse);
 200 
 201 #endif
/* [<][>][^][v][top][bottom][index][help] */
root/drivers/input/mouse/elantech.h

INCLUDED FROM

DEFINITIONS
