This source file includes following definitions.
- rmi_f03_overwrite_button
- rmi_f03_commit_buttons
- rmi_f03_pt_write
- rmi_f03_initialize
- rmi_f03_pt_open
- rmi_f03_pt_close
- rmi_f03_register_pt
- rmi_f03_probe
- rmi_f03_config
- rmi_f03_attention
- rmi_f03_remove
1
2
3
4
5
6
7 #include <linux/kernel.h>
8 #include <linux/slab.h>
9 #include <linux/serio.h>
10 #include <linux/notifier.h>
11 #include "rmi_driver.h"
12
13 #define RMI_F03_RX_DATA_OFB 0x01
14 #define RMI_F03_OB_SIZE 2
15
16 #define RMI_F03_OB_OFFSET 2
17 #define RMI_F03_OB_DATA_OFFSET 1
18 #define RMI_F03_OB_FLAG_TIMEOUT BIT(6)
19 #define RMI_F03_OB_FLAG_PARITY BIT(7)
20
21 #define RMI_F03_DEVICE_COUNT 0x07
22 #define RMI_F03_BYTES_PER_DEVICE 0x07
23 #define RMI_F03_BYTES_PER_DEVICE_SHIFT 4
24 #define RMI_F03_QUEUE_LENGTH 0x0F
25
26 #define PSMOUSE_OOB_EXTRA_BTNS 0x01
27
28 struct f03_data {
29 struct rmi_function *fn;
30
31 struct serio *serio;
32 bool serio_registered;
33
34 unsigned int overwrite_buttons;
35
36 u8 device_count;
37 u8 rx_queue_length;
38 };
39
40 int rmi_f03_overwrite_button(struct rmi_function *fn, unsigned int button,
41 int value)
42 {
43 struct f03_data *f03 = dev_get_drvdata(&fn->dev);
44 unsigned int bit;
45
46 if (button < BTN_LEFT || button > BTN_MIDDLE)
47 return -EINVAL;
48
49 bit = BIT(button - BTN_LEFT);
50
51 if (value)
52 f03->overwrite_buttons |= bit;
53 else
54 f03->overwrite_buttons &= ~bit;
55
56 return 0;
57 }
58
59 void rmi_f03_commit_buttons(struct rmi_function *fn)
60 {
61 struct f03_data *f03 = dev_get_drvdata(&fn->dev);
62 struct serio *serio = f03->serio;
63
64 serio_pause_rx(serio);
65 if (serio->drv) {
66 serio->drv->interrupt(serio, PSMOUSE_OOB_EXTRA_BTNS,
67 SERIO_OOB_DATA);
68 serio->drv->interrupt(serio, f03->overwrite_buttons,
69 SERIO_OOB_DATA);
70 }
71 serio_continue_rx(serio);
72 }
73
74 static int rmi_f03_pt_write(struct serio *id, unsigned char val)
75 {
76 struct f03_data *f03 = id->port_data;
77 int error;
78
79 rmi_dbg(RMI_DEBUG_FN, &f03->fn->dev,
80 "%s: Wrote %.2hhx to PS/2 passthrough address",
81 __func__, val);
82
83 error = rmi_write(f03->fn->rmi_dev, f03->fn->fd.data_base_addr, val);
84 if (error) {
85 dev_err(&f03->fn->dev,
86 "%s: Failed to write to F03 TX register (%d).\n",
87 __func__, error);
88 return error;
89 }
90
91 return 0;
92 }
93
94 static int rmi_f03_initialize(struct f03_data *f03)
95 {
96 struct rmi_function *fn = f03->fn;
97 struct device *dev = &fn->dev;
98 int error;
99 u8 bytes_per_device;
100 u8 query1;
101 u8 query2[RMI_F03_DEVICE_COUNT * RMI_F03_BYTES_PER_DEVICE];
102 size_t query2_len;
103
104 error = rmi_read(fn->rmi_dev, fn->fd.query_base_addr, &query1);
105 if (error) {
106 dev_err(dev, "Failed to read query register (%d).\n", error);
107 return error;
108 }
109
110 f03->device_count = query1 & RMI_F03_DEVICE_COUNT;
111 bytes_per_device = (query1 >> RMI_F03_BYTES_PER_DEVICE_SHIFT) &
112 RMI_F03_BYTES_PER_DEVICE;
113
114 query2_len = f03->device_count * bytes_per_device;
115
116
117
118
119
120 if (query2_len < 1) {
121 f03->device_count = 1;
122 f03->rx_queue_length = 7;
123 } else {
124 error = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr + 1,
125 query2, query2_len);
126 if (error) {
127 dev_err(dev,
128 "Failed to read second set of query registers (%d).\n",
129 error);
130 return error;
131 }
132
133 f03->rx_queue_length = query2[0] & RMI_F03_QUEUE_LENGTH;
134 }
135
136 return 0;
137 }
138
139 static int rmi_f03_pt_open(struct serio *serio)
140 {
141 struct f03_data *f03 = serio->port_data;
142 struct rmi_function *fn = f03->fn;
143 const u8 ob_len = f03->rx_queue_length * RMI_F03_OB_SIZE;
144 const u16 data_addr = fn->fd.data_base_addr + RMI_F03_OB_OFFSET;
145 u8 obs[RMI_F03_QUEUE_LENGTH * RMI_F03_OB_SIZE];
146 int error;
147
148
149
150
151
152
153 error = rmi_read_block(fn->rmi_dev, data_addr, &obs, ob_len);
154 if (!error)
155 rmi_dbg(RMI_DEBUG_FN, &fn->dev,
156 "%s: Consumed %*ph (%d) from PS2 guest\n",
157 __func__, ob_len, obs, ob_len);
158
159 return fn->rmi_dev->driver->set_irq_bits(fn->rmi_dev, fn->irq_mask);
160 }
161
162 static void rmi_f03_pt_close(struct serio *serio)
163 {
164 struct f03_data *f03 = serio->port_data;
165 struct rmi_function *fn = f03->fn;
166
167 fn->rmi_dev->driver->clear_irq_bits(fn->rmi_dev, fn->irq_mask);
168 }
169
170 static int rmi_f03_register_pt(struct f03_data *f03)
171 {
172 struct serio *serio;
173
174 serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
175 if (!serio)
176 return -ENOMEM;
177
178 serio->id.type = SERIO_PS_PSTHRU;
179 serio->write = rmi_f03_pt_write;
180 serio->open = rmi_f03_pt_open;
181 serio->close = rmi_f03_pt_close;
182 serio->port_data = f03;
183
184 strlcpy(serio->name, "RMI4 PS/2 pass-through", sizeof(serio->name));
185 snprintf(serio->phys, sizeof(serio->phys), "%s/serio0",
186 dev_name(&f03->fn->dev));
187 serio->dev.parent = &f03->fn->dev;
188
189 f03->serio = serio;
190
191 printk(KERN_INFO "serio: %s port at %s\n",
192 serio->name, dev_name(&f03->fn->dev));
193 serio_register_port(serio);
194
195 return 0;
196 }
197
198 static int rmi_f03_probe(struct rmi_function *fn)
199 {
200 struct device *dev = &fn->dev;
201 struct f03_data *f03;
202 int error;
203
204 f03 = devm_kzalloc(dev, sizeof(struct f03_data), GFP_KERNEL);
205 if (!f03)
206 return -ENOMEM;
207
208 f03->fn = fn;
209
210 error = rmi_f03_initialize(f03);
211 if (error < 0)
212 return error;
213
214 if (f03->device_count != 1)
215 dev_warn(dev, "found %d devices on PS/2 passthrough",
216 f03->device_count);
217
218 dev_set_drvdata(dev, f03);
219 return 0;
220 }
221
222 static int rmi_f03_config(struct rmi_function *fn)
223 {
224 struct f03_data *f03 = dev_get_drvdata(&fn->dev);
225 int error;
226
227 if (!f03->serio_registered) {
228 error = rmi_f03_register_pt(f03);
229 if (error)
230 return error;
231
232 f03->serio_registered = true;
233 } else {
234
235
236
237
238 fn->rmi_dev->driver->set_irq_bits(fn->rmi_dev, fn->irq_mask);
239 }
240
241 return 0;
242 }
243
244 static irqreturn_t rmi_f03_attention(int irq, void *ctx)
245 {
246 struct rmi_function *fn = ctx;
247 struct rmi_device *rmi_dev = fn->rmi_dev;
248 struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
249 struct f03_data *f03 = dev_get_drvdata(&fn->dev);
250 const u16 data_addr = fn->fd.data_base_addr + RMI_F03_OB_OFFSET;
251 const u8 ob_len = f03->rx_queue_length * RMI_F03_OB_SIZE;
252 u8 obs[RMI_F03_QUEUE_LENGTH * RMI_F03_OB_SIZE];
253 u8 ob_status;
254 u8 ob_data;
255 unsigned int serio_flags;
256 int i;
257 int error;
258
259 if (drvdata->attn_data.data) {
260
261 if (drvdata->attn_data.size < ob_len) {
262 dev_warn(&fn->dev, "F03 interrupted, but data is missing!\n");
263 return IRQ_HANDLED;
264 }
265
266 memcpy(obs, drvdata->attn_data.data, ob_len);
267
268 drvdata->attn_data.data += ob_len;
269 drvdata->attn_data.size -= ob_len;
270 } else {
271
272 error = rmi_read_block(fn->rmi_dev, data_addr, &obs, ob_len);
273 if (error) {
274 dev_err(&fn->dev,
275 "%s: Failed to read F03 output buffers: %d\n",
276 __func__, error);
277 serio_interrupt(f03->serio, 0, SERIO_TIMEOUT);
278 return IRQ_RETVAL(error);
279 }
280 }
281
282 for (i = 0; i < ob_len; i += RMI_F03_OB_SIZE) {
283 ob_status = obs[i];
284 ob_data = obs[i + RMI_F03_OB_DATA_OFFSET];
285 serio_flags = 0;
286
287 if (!(ob_status & RMI_F03_RX_DATA_OFB))
288 continue;
289
290 if (ob_status & RMI_F03_OB_FLAG_TIMEOUT)
291 serio_flags |= SERIO_TIMEOUT;
292 if (ob_status & RMI_F03_OB_FLAG_PARITY)
293 serio_flags |= SERIO_PARITY;
294
295 rmi_dbg(RMI_DEBUG_FN, &fn->dev,
296 "%s: Received %.2hhx from PS2 guest T: %c P: %c\n",
297 __func__, ob_data,
298 serio_flags & SERIO_TIMEOUT ? 'Y' : 'N',
299 serio_flags & SERIO_PARITY ? 'Y' : 'N');
300
301 serio_interrupt(f03->serio, ob_data, serio_flags);
302 }
303
304 return IRQ_HANDLED;
305 }
306
307 static void rmi_f03_remove(struct rmi_function *fn)
308 {
309 struct f03_data *f03 = dev_get_drvdata(&fn->dev);
310
311 if (f03->serio_registered)
312 serio_unregister_port(f03->serio);
313 }
314
315 struct rmi_function_handler rmi_f03_handler = {
316 .driver = {
317 .name = "rmi4_f03",
318 },
319 .func = 0x03,
320 .probe = rmi_f03_probe,
321 .config = rmi_f03_config,
322 .attention = rmi_f03_attention,
323 .remove = rmi_f03_remove,
324 };
325
326 MODULE_AUTHOR("Lyude Paul <thatslyude@gmail.com>");
327 MODULE_DESCRIPTION("RMI F03 module");
328 MODULE_LICENSE("GPL");