root/drivers/rtc/rtc-mc146818-lib.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. mc146818_is_updating
  2. mc146818_get_time
  3. mc146818_set_time

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 #include <linux/bcd.h>
   3 #include <linux/delay.h>
   4 #include <linux/export.h>
   5 #include <linux/mc146818rtc.h>
   6 
   7 #ifdef CONFIG_ACPI
   8 #include <linux/acpi.h>
   9 #endif
  10 
  11 /*
  12  * Returns true if a clock update is in progress
  13  */
  14 static inline unsigned char mc146818_is_updating(void)
  15 {
  16         unsigned char uip;
  17         unsigned long flags;
  18 
  19         spin_lock_irqsave(&rtc_lock, flags);
  20         uip = (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP);
  21         spin_unlock_irqrestore(&rtc_lock, flags);
  22         return uip;
  23 }
  24 
  25 unsigned int mc146818_get_time(struct rtc_time *time)
  26 {
  27         unsigned char ctrl;
  28         unsigned long flags;
  29         unsigned char century = 0;
  30 
  31 #ifdef CONFIG_MACH_DECSTATION
  32         unsigned int real_year;
  33 #endif
  34 
  35         /*
  36          * read RTC once any update in progress is done. The update
  37          * can take just over 2ms. We wait 20ms. There is no need to
  38          * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
  39          * If you need to know *exactly* when a second has started, enable
  40          * periodic update complete interrupts, (via ioctl) and then
  41          * immediately read /dev/rtc which will block until you get the IRQ.
  42          * Once the read clears, read the RTC time (again via ioctl). Easy.
  43          */
  44         if (mc146818_is_updating())
  45                 mdelay(20);
  46 
  47         /*
  48          * Only the values that we read from the RTC are set. We leave
  49          * tm_wday, tm_yday and tm_isdst untouched. Even though the
  50          * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
  51          * by the RTC when initially set to a non-zero value.
  52          */
  53         spin_lock_irqsave(&rtc_lock, flags);
  54         time->tm_sec = CMOS_READ(RTC_SECONDS);
  55         time->tm_min = CMOS_READ(RTC_MINUTES);
  56         time->tm_hour = CMOS_READ(RTC_HOURS);
  57         time->tm_mday = CMOS_READ(RTC_DAY_OF_MONTH);
  58         time->tm_mon = CMOS_READ(RTC_MONTH);
  59         time->tm_year = CMOS_READ(RTC_YEAR);
  60 #ifdef CONFIG_MACH_DECSTATION
  61         real_year = CMOS_READ(RTC_DEC_YEAR);
  62 #endif
  63 #ifdef CONFIG_ACPI
  64         if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
  65             acpi_gbl_FADT.century)
  66                 century = CMOS_READ(acpi_gbl_FADT.century);
  67 #endif
  68         ctrl = CMOS_READ(RTC_CONTROL);
  69         spin_unlock_irqrestore(&rtc_lock, flags);
  70 
  71         if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
  72         {
  73                 time->tm_sec = bcd2bin(time->tm_sec);
  74                 time->tm_min = bcd2bin(time->tm_min);
  75                 time->tm_hour = bcd2bin(time->tm_hour);
  76                 time->tm_mday = bcd2bin(time->tm_mday);
  77                 time->tm_mon = bcd2bin(time->tm_mon);
  78                 time->tm_year = bcd2bin(time->tm_year);
  79                 century = bcd2bin(century);
  80         }
  81 
  82 #ifdef CONFIG_MACH_DECSTATION
  83         time->tm_year += real_year - 72;
  84 #endif
  85 
  86         if (century > 20)
  87                 time->tm_year += (century - 19) * 100;
  88 
  89         /*
  90          * Account for differences between how the RTC uses the values
  91          * and how they are defined in a struct rtc_time;
  92          */
  93         if (time->tm_year <= 69)
  94                 time->tm_year += 100;
  95 
  96         time->tm_mon--;
  97 
  98         return RTC_24H;
  99 }
 100 EXPORT_SYMBOL_GPL(mc146818_get_time);
 101 
 102 /* Set the current date and time in the real time clock. */
 103 int mc146818_set_time(struct rtc_time *time)
 104 {
 105         unsigned long flags;
 106         unsigned char mon, day, hrs, min, sec;
 107         unsigned char save_control, save_freq_select;
 108         unsigned int yrs;
 109 #ifdef CONFIG_MACH_DECSTATION
 110         unsigned int real_yrs, leap_yr;
 111 #endif
 112         unsigned char century = 0;
 113 
 114         yrs = time->tm_year;
 115         mon = time->tm_mon + 1;   /* tm_mon starts at zero */
 116         day = time->tm_mday;
 117         hrs = time->tm_hour;
 118         min = time->tm_min;
 119         sec = time->tm_sec;
 120 
 121         if (yrs > 255)  /* They are unsigned */
 122                 return -EINVAL;
 123 
 124         spin_lock_irqsave(&rtc_lock, flags);
 125 #ifdef CONFIG_MACH_DECSTATION
 126         real_yrs = yrs;
 127         leap_yr = ((!((yrs + 1900) % 4) && ((yrs + 1900) % 100)) ||
 128                         !((yrs + 1900) % 400));
 129         yrs = 72;
 130 
 131         /*
 132          * We want to keep the year set to 73 until March
 133          * for non-leap years, so that Feb, 29th is handled
 134          * correctly.
 135          */
 136         if (!leap_yr && mon < 3) {
 137                 real_yrs--;
 138                 yrs = 73;
 139         }
 140 #endif
 141 
 142 #ifdef CONFIG_ACPI
 143         if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
 144             acpi_gbl_FADT.century) {
 145                 century = (yrs + 1900) / 100;
 146                 yrs %= 100;
 147         }
 148 #endif
 149 
 150         /* These limits and adjustments are independent of
 151          * whether the chip is in binary mode or not.
 152          */
 153         if (yrs > 169) {
 154                 spin_unlock_irqrestore(&rtc_lock, flags);
 155                 return -EINVAL;
 156         }
 157 
 158         if (yrs >= 100)
 159                 yrs -= 100;
 160 
 161         if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY)
 162             || RTC_ALWAYS_BCD) {
 163                 sec = bin2bcd(sec);
 164                 min = bin2bcd(min);
 165                 hrs = bin2bcd(hrs);
 166                 day = bin2bcd(day);
 167                 mon = bin2bcd(mon);
 168                 yrs = bin2bcd(yrs);
 169                 century = bin2bcd(century);
 170         }
 171 
 172         save_control = CMOS_READ(RTC_CONTROL);
 173         CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
 174         save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
 175         CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
 176 
 177 #ifdef CONFIG_MACH_DECSTATION
 178         CMOS_WRITE(real_yrs, RTC_DEC_YEAR);
 179 #endif
 180         CMOS_WRITE(yrs, RTC_YEAR);
 181         CMOS_WRITE(mon, RTC_MONTH);
 182         CMOS_WRITE(day, RTC_DAY_OF_MONTH);
 183         CMOS_WRITE(hrs, RTC_HOURS);
 184         CMOS_WRITE(min, RTC_MINUTES);
 185         CMOS_WRITE(sec, RTC_SECONDS);
 186 #ifdef CONFIG_ACPI
 187         if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
 188             acpi_gbl_FADT.century)
 189                 CMOS_WRITE(century, acpi_gbl_FADT.century);
 190 #endif
 191 
 192         CMOS_WRITE(save_control, RTC_CONTROL);
 193         CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
 194 
 195         spin_unlock_irqrestore(&rtc_lock, flags);
 196 
 197         return 0;
 198 }
 199 EXPORT_SYMBOL_GPL(mc146818_set_time);

/* [<][>][^][v][top][bottom][index][help] */