drivers/irqchip/irq-bcm2835.c

/* [<][>][^][v][top][bottom][index][help] */
This source file includes following definitions.
armctrl_mask_irq
armctrl_unmask_irq
armctrl_xlate
armctrl_of_init
bcm2835_armctrl_of_init
bcm2836_armctrl_of_init
armctrl_translate_bank
armctrl_translate_shortcut
get_next_armctrl_hwirq
bcm2835_handle_irq
bcm2836_chained_handle_irq
   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright 2010 Broadcom
   4  * Copyright 2012 Simon Arlott, Chris Boot, Stephen Warren
   5  *
   6  * Quirk 1: Shortcut interrupts don't set the bank 1/2 register pending bits
   7  *
   8  * If an interrupt fires on bank 1 that isn't in the shortcuts list, bit 8
   9  * on bank 0 is set to signify that an interrupt in bank 1 has fired, and
  10  * to look in the bank 1 status register for more information.
  11  *
  12  * If an interrupt fires on bank 1 that _is_ in the shortcuts list, its
  13  * shortcut bit in bank 0 is set as well as its interrupt bit in the bank 1
  14  * status register, but bank 0 bit 8 is _not_ set.
  15  *
  16  * Quirk 2: You can't mask the register 1/2 pending interrupts
  17  *
  18  * In a proper cascaded interrupt controller, the interrupt lines with
  19  * cascaded interrupt controllers on them are just normal interrupt lines.
  20  * You can mask the interrupts and get on with things. With this controller
  21  * you can't do that.
  22  *
  23  * Quirk 3: The shortcut interrupts can't be (un)masked in bank 0
  24  *
  25  * Those interrupts that have shortcuts can only be masked/unmasked in
  26  * their respective banks' enable/disable registers. Doing so in the bank 0
  27  * enable/disable registers has no effect.
  28  *
  29  * The FIQ control register:
  30  *  Bits 0-6: IRQ (index in order of interrupts from banks 1, 2, then 0)
  31  *  Bit    7: Enable FIQ generation
  32  *  Bits  8+: Unused
  33  *
  34  * An interrupt must be disabled before configuring it for FIQ generation
  35  * otherwise both handlers will fire at the same time!
  36  */
  37 
  38 #include <linux/io.h>
  39 #include <linux/slab.h>
  40 #include <linux/of_address.h>
  41 #include <linux/of_irq.h>
  42 #include <linux/irqchip.h>
  43 #include <linux/irqdomain.h>
  44 
  45 #include <asm/exception.h>
  46 
  47 /* Put the bank and irq (32 bits) into the hwirq */
  48 #define MAKE_HWIRQ(b, n)        ((b << 5) | (n))
  49 #define HWIRQ_BANK(i)           (i >> 5)
  50 #define HWIRQ_BIT(i)            BIT(i & 0x1f)
  51 
  52 #define NR_IRQS_BANK0           8
  53 #define BANK0_HWIRQ_MASK        0xff
  54 /* Shortcuts can't be disabled so any unknown new ones need to be masked */
  55 #define SHORTCUT1_MASK          0x00007c00
  56 #define SHORTCUT2_MASK          0x001f8000
  57 #define SHORTCUT_SHIFT          10
  58 #define BANK1_HWIRQ             BIT(8)
  59 #define BANK2_HWIRQ             BIT(9)
  60 #define BANK0_VALID_MASK        (BANK0_HWIRQ_MASK | BANK1_HWIRQ | BANK2_HWIRQ \
  61                                         | SHORTCUT1_MASK | SHORTCUT2_MASK)
  62 
  63 #define REG_FIQ_CONTROL         0x0c
  64 
  65 #define NR_BANKS                3
  66 #define IRQS_PER_BANK           32
  67 
  68 static const int reg_pending[] __initconst = { 0x00, 0x04, 0x08 };
  69 static const int reg_enable[] __initconst = { 0x18, 0x10, 0x14 };
  70 static const int reg_disable[] __initconst = { 0x24, 0x1c, 0x20 };
  71 static const int bank_irqs[] __initconst = { 8, 32, 32 };
  72 
  73 static const int shortcuts[] = {
  74         7, 9, 10, 18, 19,               /* Bank 1 */
  75         21, 22, 23, 24, 25, 30          /* Bank 2 */
  76 };
  77 
  78 struct armctrl_ic {
  79         void __iomem *base;
  80         void __iomem *pending[NR_BANKS];
  81         void __iomem *enable[NR_BANKS];
  82         void __iomem *disable[NR_BANKS];
  83         struct irq_domain *domain;
  84 };
  85 
  86 static struct armctrl_ic intc __read_mostly;
  87 static void __exception_irq_entry bcm2835_handle_irq(
  88         struct pt_regs *regs);
  89 static void bcm2836_chained_handle_irq(struct irq_desc *desc);
  90 
  91 static void armctrl_mask_irq(struct irq_data *d)
  92 {
  93         writel_relaxed(HWIRQ_BIT(d->hwirq), intc.disable[HWIRQ_BANK(d->hwirq)]);
  94 }
  95 
  96 static void armctrl_unmask_irq(struct irq_data *d)
  97 {
  98         writel_relaxed(HWIRQ_BIT(d->hwirq), intc.enable[HWIRQ_BANK(d->hwirq)]);
  99 }
 100 
 101 static struct irq_chip armctrl_chip = {
 102         .name = "ARMCTRL-level",
 103         .irq_mask = armctrl_mask_irq,
 104         .irq_unmask = armctrl_unmask_irq
 105 };
 106 
 107 static int armctrl_xlate(struct irq_domain *d, struct device_node *ctrlr,
 108         const u32 *intspec, unsigned int intsize,
 109         unsigned long *out_hwirq, unsigned int *out_type)
 110 {
 111         if (WARN_ON(intsize != 2))
 112                 return -EINVAL;
 113 
 114         if (WARN_ON(intspec[0] >= NR_BANKS))
 115                 return -EINVAL;
 116 
 117         if (WARN_ON(intspec[1] >= IRQS_PER_BANK))
 118                 return -EINVAL;
 119 
 120         if (WARN_ON(intspec[0] == 0 && intspec[1] >= NR_IRQS_BANK0))
 121                 return -EINVAL;
 122 
 123         *out_hwirq = MAKE_HWIRQ(intspec[0], intspec[1]);
 124         *out_type = IRQ_TYPE_NONE;
 125         return 0;
 126 }
 127 
 128 static const struct irq_domain_ops armctrl_ops = {
 129         .xlate = armctrl_xlate
 130 };
 131 
 132 static int __init armctrl_of_init(struct device_node *node,
 133                                   struct device_node *parent,
 134                                   bool is_2836)
 135 {
 136         void __iomem *base;
 137         int irq, b, i;
 138 
 139         base = of_iomap(node, 0);
 140         if (!base)
 141                 panic("%pOF: unable to map IC registers\n", node);
 142 
 143         intc.domain = irq_domain_add_linear(node, MAKE_HWIRQ(NR_BANKS, 0),
 144                         &armctrl_ops, NULL);
 145         if (!intc.domain)
 146                 panic("%pOF: unable to create IRQ domain\n", node);
 147 
 148         for (b = 0; b < NR_BANKS; b++) {
 149                 intc.pending[b] = base + reg_pending[b];
 150                 intc.enable[b] = base + reg_enable[b];
 151                 intc.disable[b] = base + reg_disable[b];
 152 
 153                 for (i = 0; i < bank_irqs[b]; i++) {
 154                         irq = irq_create_mapping(intc.domain, MAKE_HWIRQ(b, i));
 155                         BUG_ON(irq <= 0);
 156                         irq_set_chip_and_handler(irq, &armctrl_chip,
 157                                 handle_level_irq);
 158                         irq_set_probe(irq);
 159                 }
 160         }
 161 
 162         if (is_2836) {
 163                 int parent_irq = irq_of_parse_and_map(node, 0);
 164 
 165                 if (!parent_irq) {
 166                         panic("%pOF: unable to get parent interrupt.\n",
 167                               node);
 168                 }
 169                 irq_set_chained_handler(parent_irq, bcm2836_chained_handle_irq);
 170         } else {
 171                 set_handle_irq(bcm2835_handle_irq);
 172         }
 173 
 174         return 0;
 175 }
 176 
 177 static int __init bcm2835_armctrl_of_init(struct device_node *node,
 178                                           struct device_node *parent)
 179 {
 180         return armctrl_of_init(node, parent, false);
 181 }
 182 
 183 static int __init bcm2836_armctrl_of_init(struct device_node *node,
 184                                           struct device_node *parent)
 185 {
 186         return armctrl_of_init(node, parent, true);
 187 }
 188 
 189 
 190 /*
 191  * Handle each interrupt across the entire interrupt controller.  This reads the
 192  * status register before handling each interrupt, which is necessary given that
 193  * handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
 194  */
 195 
 196 static u32 armctrl_translate_bank(int bank)
 197 {
 198         u32 stat = readl_relaxed(intc.pending[bank]);
 199 
 200         return MAKE_HWIRQ(bank, ffs(stat) - 1);
 201 }
 202 
 203 static u32 armctrl_translate_shortcut(int bank, u32 stat)
 204 {
 205         return MAKE_HWIRQ(bank, shortcuts[ffs(stat >> SHORTCUT_SHIFT) - 1]);
 206 }
 207 
 208 static u32 get_next_armctrl_hwirq(void)
 209 {
 210         u32 stat = readl_relaxed(intc.pending[0]) & BANK0_VALID_MASK;
 211 
 212         if (stat == 0)
 213                 return ~0;
 214         else if (stat & BANK0_HWIRQ_MASK)
 215                 return MAKE_HWIRQ(0, ffs(stat & BANK0_HWIRQ_MASK) - 1);
 216         else if (stat & SHORTCUT1_MASK)
 217                 return armctrl_translate_shortcut(1, stat & SHORTCUT1_MASK);
 218         else if (stat & SHORTCUT2_MASK)
 219                 return armctrl_translate_shortcut(2, stat & SHORTCUT2_MASK);
 220         else if (stat & BANK1_HWIRQ)
 221                 return armctrl_translate_bank(1);
 222         else if (stat & BANK2_HWIRQ)
 223                 return armctrl_translate_bank(2);
 224         else
 225                 BUG();
 226 }
 227 
 228 static void __exception_irq_entry bcm2835_handle_irq(
 229         struct pt_regs *regs)
 230 {
 231         u32 hwirq;
 232 
 233         while ((hwirq = get_next_armctrl_hwirq()) != ~0)
 234                 handle_domain_irq(intc.domain, hwirq, regs);
 235 }
 236 
 237 static void bcm2836_chained_handle_irq(struct irq_desc *desc)
 238 {
 239         u32 hwirq;
 240 
 241         while ((hwirq = get_next_armctrl_hwirq()) != ~0)
 242                 generic_handle_irq(irq_linear_revmap(intc.domain, hwirq));
 243 }
 244 
 245 IRQCHIP_DECLARE(bcm2835_armctrl_ic, "brcm,bcm2835-armctrl-ic",
 246                 bcm2835_armctrl_of_init);
 247 IRQCHIP_DECLARE(bcm2836_armctrl_ic, "brcm,bcm2836-armctrl-ic",
 248                 bcm2836_armctrl_of_init);
/* [<][>][^][v][top][bottom][index][help] */
root/drivers/irqchip/irq-bcm2835.c

DEFINITIONS
