This source file includes following definitions.
- isl9305_i2c_probe
1
2
3
4
5
6
7
8
9
10 #include <linux/module.h>
11 #include <linux/err.h>
12 #include <linux/i2c.h>
13 #include <linux/of.h>
14 #include <linux/platform_data/isl9305.h>
15 #include <linux/regmap.h>
16 #include <linux/regulator/driver.h>
17 #include <linux/regulator/of_regulator.h>
18 #include <linux/slab.h>
19
20
21
22
23 #define ISL9305_DCD1OUT 0x0
24 #define ISL9305_DCD2OUT 0x1
25 #define ISL9305_LDO1OUT 0x2
26 #define ISL9305_LDO2OUT 0x3
27 #define ISL9305_DCD_PARAMETER 0x4
28 #define ISL9305_SYSTEM_PARAMETER 0x5
29 #define ISL9305_DCD_SRCTL 0x6
30
31 #define ISL9305_MAX_REG ISL9305_DCD_SRCTL
32
33
34
35
36 #define ISL9305_DCD_PHASE 0x40
37 #define ISL9305_DCD2_ULTRA 0x20
38 #define ISL9305_DCD1_ULTRA 0x10
39 #define ISL9305_DCD2_BLD 0x08
40 #define ISL9305_DCD1_BLD 0x04
41 #define ISL9305_DCD2_MODE 0x02
42 #define ISL9305_DCD1_MODE 0x01
43
44
45
46
47 #define ISL9305_I2C_EN 0x40
48 #define ISL9305_DCDPOR_MASK 0x30
49 #define ISL9305_LDO2_EN 0x08
50 #define ISL9305_LDO1_EN 0x04
51 #define ISL9305_DCD2_EN 0x02
52 #define ISL9305_DCD1_EN 0x01
53
54
55
56
57 #define ISL9305_DCD2SR_MASK 0xc0
58 #define ISL9305_DCD1SR_MASK 0x07
59
60 static const struct regulator_ops isl9305_ops = {
61 .enable = regulator_enable_regmap,
62 .disable = regulator_disable_regmap,
63 .is_enabled = regulator_is_enabled_regmap,
64 .list_voltage = regulator_list_voltage_linear,
65 .get_voltage_sel = regulator_get_voltage_sel_regmap,
66 .set_voltage_sel = regulator_set_voltage_sel_regmap,
67 };
68
69 static const struct regulator_desc isl9305_regulators[] = {
70 [ISL9305_DCD1] = {
71 .name = "DCD1",
72 .of_match = of_match_ptr("dcd1"),
73 .regulators_node = of_match_ptr("regulators"),
74 .n_voltages = 0x70,
75 .min_uV = 825000,
76 .uV_step = 25000,
77 .vsel_reg = ISL9305_DCD1OUT,
78 .vsel_mask = 0x7f,
79 .enable_reg = ISL9305_SYSTEM_PARAMETER,
80 .enable_mask = ISL9305_DCD1_EN,
81 .supply_name = "VINDCD1",
82 .ops = &isl9305_ops,
83 .owner = THIS_MODULE,
84 },
85 [ISL9305_DCD2] = {
86 .name = "DCD2",
87 .of_match = of_match_ptr("dcd2"),
88 .regulators_node = of_match_ptr("regulators"),
89 .n_voltages = 0x70,
90 .min_uV = 825000,
91 .uV_step = 25000,
92 .vsel_reg = ISL9305_DCD2OUT,
93 .vsel_mask = 0x7f,
94 .enable_reg = ISL9305_SYSTEM_PARAMETER,
95 .enable_mask = ISL9305_DCD2_EN,
96 .supply_name = "VINDCD2",
97 .ops = &isl9305_ops,
98 .owner = THIS_MODULE,
99 },
100 [ISL9305_LDO1] = {
101 .name = "LDO1",
102 .of_match = of_match_ptr("ldo1"),
103 .regulators_node = of_match_ptr("regulators"),
104 .n_voltages = 0x37,
105 .min_uV = 900000,
106 .uV_step = 50000,
107 .vsel_reg = ISL9305_LDO1OUT,
108 .vsel_mask = 0x3f,
109 .enable_reg = ISL9305_SYSTEM_PARAMETER,
110 .enable_mask = ISL9305_LDO1_EN,
111 .supply_name = "VINLDO1",
112 .ops = &isl9305_ops,
113 .owner = THIS_MODULE,
114 },
115 [ISL9305_LDO2] = {
116 .name = "LDO2",
117 .of_match = of_match_ptr("ldo2"),
118 .regulators_node = of_match_ptr("regulators"),
119 .n_voltages = 0x37,
120 .min_uV = 900000,
121 .uV_step = 50000,
122 .vsel_reg = ISL9305_LDO2OUT,
123 .vsel_mask = 0x3f,
124 .enable_reg = ISL9305_SYSTEM_PARAMETER,
125 .enable_mask = ISL9305_LDO2_EN,
126 .supply_name = "VINLDO2",
127 .ops = &isl9305_ops,
128 .owner = THIS_MODULE,
129 },
130 };
131
132 static const struct regmap_config isl9305_regmap = {
133 .reg_bits = 8,
134 .val_bits = 8,
135
136 .max_register = ISL9305_MAX_REG,
137 .cache_type = REGCACHE_RBTREE,
138 };
139
140 static int isl9305_i2c_probe(struct i2c_client *i2c,
141 const struct i2c_device_id *id)
142 {
143 struct regulator_config config = { };
144 struct isl9305_pdata *pdata = i2c->dev.platform_data;
145 struct regulator_dev *rdev;
146 struct regmap *regmap;
147 int i, ret;
148
149 regmap = devm_regmap_init_i2c(i2c, &isl9305_regmap);
150 if (IS_ERR(regmap)) {
151 ret = PTR_ERR(regmap);
152 dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret);
153 return ret;
154 }
155
156 config.dev = &i2c->dev;
157
158 for (i = 0; i < ARRAY_SIZE(isl9305_regulators); i++) {
159 if (pdata)
160 config.init_data = pdata->init_data[i];
161 else
162 config.init_data = NULL;
163
164 rdev = devm_regulator_register(&i2c->dev,
165 &isl9305_regulators[i],
166 &config);
167 if (IS_ERR(rdev)) {
168 ret = PTR_ERR(rdev);
169 dev_err(&i2c->dev, "Failed to register %s: %d\n",
170 isl9305_regulators[i].name, ret);
171 return ret;
172 }
173 }
174
175 return 0;
176 }
177
178 #ifdef CONFIG_OF
179 static const struct of_device_id isl9305_dt_ids[] = {
180 { .compatible = "isl,isl9305" },
181 { .compatible = "isil,isl9305" },
182 { .compatible = "isl,isl9305h" },
183 { .compatible = "isil,isl9305h" },
184 {},
185 };
186 MODULE_DEVICE_TABLE(of, isl9305_dt_ids);
187 #endif
188
189 static const struct i2c_device_id isl9305_i2c_id[] = {
190 { "isl9305", },
191 { "isl9305h", },
192 { }
193 };
194 MODULE_DEVICE_TABLE(i2c, isl9305_i2c_id);
195
196 static struct i2c_driver isl9305_regulator_driver = {
197 .driver = {
198 .name = "isl9305",
199 .of_match_table = of_match_ptr(isl9305_dt_ids),
200 },
201 .probe = isl9305_i2c_probe,
202 .id_table = isl9305_i2c_id,
203 };
204
205 module_i2c_driver(isl9305_regulator_driver);
206
207 MODULE_AUTHOR("Mark Brown");
208 MODULE_DESCRIPTION("Intersil ISL9305 DCDC regulator");
209 MODULE_LICENSE("GPL");