root/arch/ia64/kernel/sal.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. default_handler
  2. ia64_sal_strerror
  3. ia64_sal_handler_init
  4. check_versions
  5. sal_desc_entry_point
  6. set_smp_redirect
  7. sal_desc_platform_feature
  8. sal_desc_ap_wakeup
  9. chk_nointroute_opt
  10. sal_desc_ap_wakeup
  11. force_pal_cache_flush
  12. check_sal_cache_flush
  13. ia64_sal_cache_flush
  14. ia64_sal_init
  15. ia64_sal_oemcall
  16. ia64_sal_oemcall_nolock
  17. ia64_sal_oemcall_reentrant
  18. ia64_sal_freq_base

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * System Abstraction Layer (SAL) interface routines.
   4  *
   5  * Copyright (C) 1998, 1999, 2001, 2003 Hewlett-Packard Co
   6  *      David Mosberger-Tang <davidm@hpl.hp.com>
   7  * Copyright (C) 1999 VA Linux Systems
   8  * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
   9  */
  10 
  11 #include <linux/kernel.h>
  12 #include <linux/init.h>
  13 #include <linux/module.h>
  14 #include <linux/spinlock.h>
  15 #include <linux/string.h>
  16 
  17 #include <asm/delay.h>
  18 #include <asm/page.h>
  19 #include <asm/sal.h>
  20 #include <asm/pal.h>
  21 
  22  __cacheline_aligned DEFINE_SPINLOCK(sal_lock);
  23 unsigned long sal_platform_features;
  24 
  25 unsigned short sal_revision;
  26 unsigned short sal_version;
  27 
  28 #define SAL_MAJOR(x) ((x) >> 8)
  29 #define SAL_MINOR(x) ((x) & 0xff)
  30 
  31 static struct {
  32         void *addr;     /* function entry point */
  33         void *gpval;    /* gp value to use */
  34 } pdesc;
  35 
  36 static long
  37 default_handler (void)
  38 {
  39         return -1;
  40 }
  41 
  42 ia64_sal_handler ia64_sal = (ia64_sal_handler) default_handler;
  43 ia64_sal_desc_ptc_t *ia64_ptc_domain_info;
  44 
  45 const char *
  46 ia64_sal_strerror (long status)
  47 {
  48         const char *str;
  49         switch (status) {
  50               case 0: str = "Call completed without error"; break;
  51               case 1: str = "Effect a warm boot of the system to complete "
  52                               "the update"; break;
  53               case -1: str = "Not implemented"; break;
  54               case -2: str = "Invalid argument"; break;
  55               case -3: str = "Call completed with error"; break;
  56               case -4: str = "Virtual address not registered"; break;
  57               case -5: str = "No information available"; break;
  58               case -6: str = "Insufficient space to add the entry"; break;
  59               case -7: str = "Invalid entry_addr value"; break;
  60               case -8: str = "Invalid interrupt vector"; break;
  61               case -9: str = "Requested memory not available"; break;
  62               case -10: str = "Unable to write to the NVM device"; break;
  63               case -11: str = "Invalid partition type specified"; break;
  64               case -12: str = "Invalid NVM_Object id specified"; break;
  65               case -13: str = "NVM_Object already has the maximum number "
  66                                 "of partitions"; break;
  67               case -14: str = "Insufficient space in partition for the "
  68                                 "requested write sub-function"; break;
  69               case -15: str = "Insufficient data buffer space for the "
  70                                 "requested read record sub-function"; break;
  71               case -16: str = "Scratch buffer required for the write/delete "
  72                                 "sub-function"; break;
  73               case -17: str = "Insufficient space in the NVM_Object for the "
  74                                 "requested create sub-function"; break;
  75               case -18: str = "Invalid value specified in the partition_rec "
  76                                 "argument"; break;
  77               case -19: str = "Record oriented I/O not supported for this "
  78                                 "partition"; break;
  79               case -20: str = "Bad format of record to be written or "
  80                                 "required keyword variable not "
  81                                 "specified"; break;
  82               default: str = "Unknown SAL status code"; break;
  83         }
  84         return str;
  85 }
  86 
  87 void __init
  88 ia64_sal_handler_init (void *entry_point, void *gpval)
  89 {
  90         /* fill in the SAL procedure descriptor and point ia64_sal to it: */
  91         pdesc.addr = entry_point;
  92         pdesc.gpval = gpval;
  93         ia64_sal = (ia64_sal_handler) &pdesc;
  94 }
  95 
  96 static void __init
  97 check_versions (struct ia64_sal_systab *systab)
  98 {
  99         sal_revision = (systab->sal_rev_major << 8) | systab->sal_rev_minor;
 100         sal_version = (systab->sal_b_rev_major << 8) | systab->sal_b_rev_minor;
 101 
 102         /* Check for broken firmware */
 103         if ((sal_revision == SAL_VERSION_CODE(49, 29))
 104             && (sal_version == SAL_VERSION_CODE(49, 29)))
 105         {
 106                 /*
 107                  * Old firmware for zx2000 prototypes have this weird version number,
 108                  * reset it to something sane.
 109                  */
 110                 sal_revision = SAL_VERSION_CODE(2, 8);
 111                 sal_version = SAL_VERSION_CODE(0, 0);
 112         }
 113 }
 114 
 115 static void __init
 116 sal_desc_entry_point (void *p)
 117 {
 118         struct ia64_sal_desc_entry_point *ep = p;
 119         ia64_pal_handler_init(__va(ep->pal_proc));
 120         ia64_sal_handler_init(__va(ep->sal_proc), __va(ep->gp));
 121 }
 122 
 123 #ifdef CONFIG_SMP
 124 static void __init
 125 set_smp_redirect (int flag)
 126 {
 127 #ifndef CONFIG_HOTPLUG_CPU
 128         if (no_int_routing)
 129                 smp_int_redirect &= ~flag;
 130         else
 131                 smp_int_redirect |= flag;
 132 #else
 133         /*
 134          * For CPU Hotplug we dont want to do any chipset supported
 135          * interrupt redirection. The reason is this would require that
 136          * All interrupts be stopped and hard bind the irq to a cpu.
 137          * Later when the interrupt is fired we need to set the redir hint
 138          * on again in the vector. This is cumbersome for something that the
 139          * user mode irq balancer will solve anyways.
 140          */
 141         no_int_routing=1;
 142         smp_int_redirect &= ~flag;
 143 #endif
 144 }
 145 #else
 146 #define set_smp_redirect(flag)  do { } while (0)
 147 #endif
 148 
 149 static void __init
 150 sal_desc_platform_feature (void *p)
 151 {
 152         struct ia64_sal_desc_platform_feature *pf = p;
 153         sal_platform_features = pf->feature_mask;
 154 
 155         printk(KERN_INFO "SAL Platform features:");
 156         if (!sal_platform_features) {
 157                 printk(" None\n");
 158                 return;
 159         }
 160 
 161         if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_BUS_LOCK)
 162                 printk(" BusLock");
 163         if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT) {
 164                 printk(" IRQ_Redirection");
 165                 set_smp_redirect(SMP_IRQ_REDIRECTION);
 166         }
 167         if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT) {
 168                 printk(" IPI_Redirection");
 169                 set_smp_redirect(SMP_IPI_REDIRECTION);
 170         }
 171         if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT)
 172                 printk(" ITC_Drift");
 173         printk("\n");
 174 }
 175 
 176 #ifdef CONFIG_SMP
 177 static void __init
 178 sal_desc_ap_wakeup (void *p)
 179 {
 180         struct ia64_sal_desc_ap_wakeup *ap = p;
 181 
 182         switch (ap->mechanism) {
 183         case IA64_SAL_AP_EXTERNAL_INT:
 184                 ap_wakeup_vector = ap->vector;
 185                 printk(KERN_INFO "SAL: AP wakeup using external interrupt "
 186                                 "vector 0x%lx\n", ap_wakeup_vector);
 187                 break;
 188         default:
 189                 printk(KERN_ERR "SAL: AP wakeup mechanism unsupported!\n");
 190                 break;
 191         }
 192 }
 193 
 194 static void __init
 195 chk_nointroute_opt(void)
 196 {
 197         char *cp;
 198 
 199         for (cp = boot_command_line; *cp; ) {
 200                 if (memcmp(cp, "nointroute", 10) == 0) {
 201                         no_int_routing = 1;
 202                         printk ("no_int_routing on\n");
 203                         break;
 204                 } else {
 205                         while (*cp != ' ' && *cp)
 206                                 ++cp;
 207                         while (*cp == ' ')
 208                                 ++cp;
 209                 }
 210         }
 211 }
 212 
 213 #else
 214 static void __init sal_desc_ap_wakeup(void *p) { }
 215 #endif
 216 
 217 /*
 218  * HP rx5670 firmware polls for interrupts during SAL_CACHE_FLUSH by reading
 219  * cr.ivr, but it never writes cr.eoi.  This leaves any interrupt marked as
 220  * "in-service" and masks other interrupts of equal or lower priority.
 221  *
 222  * HP internal defect reports: F1859, F2775, F3031.
 223  */
 224 static int sal_cache_flush_drops_interrupts;
 225 
 226 static int __init
 227 force_pal_cache_flush(char *str)
 228 {
 229         sal_cache_flush_drops_interrupts = 1;
 230         return 0;
 231 }
 232 early_param("force_pal_cache_flush", force_pal_cache_flush);
 233 
 234 void __init
 235 check_sal_cache_flush (void)
 236 {
 237         unsigned long flags;
 238         int cpu;
 239         u64 vector, cache_type = 3;
 240         struct ia64_sal_retval isrv;
 241 
 242         if (sal_cache_flush_drops_interrupts)
 243                 return;
 244 
 245         cpu = get_cpu();
 246         local_irq_save(flags);
 247 
 248         /*
 249          * Send ourselves a timer interrupt, wait until it's reported, and see
 250          * if SAL_CACHE_FLUSH drops it.
 251          */
 252         ia64_send_ipi(cpu, IA64_TIMER_VECTOR, IA64_IPI_DM_INT, 0);
 253 
 254         while (!ia64_get_irr(IA64_TIMER_VECTOR))
 255                 cpu_relax();
 256 
 257         SAL_CALL(isrv, SAL_CACHE_FLUSH, cache_type, 0, 0, 0, 0, 0, 0);
 258 
 259         if (isrv.status)
 260                 printk(KERN_ERR "SAL_CAL_FLUSH failed with %ld\n", isrv.status);
 261 
 262         if (ia64_get_irr(IA64_TIMER_VECTOR)) {
 263                 vector = ia64_get_ivr();
 264                 ia64_eoi();
 265                 WARN_ON(vector != IA64_TIMER_VECTOR);
 266         } else {
 267                 sal_cache_flush_drops_interrupts = 1;
 268                 printk(KERN_ERR "SAL: SAL_CACHE_FLUSH drops interrupts; "
 269                         "PAL_CACHE_FLUSH will be used instead\n");
 270                 ia64_eoi();
 271         }
 272 
 273         local_irq_restore(flags);
 274         put_cpu();
 275 }
 276 
 277 s64
 278 ia64_sal_cache_flush (u64 cache_type)
 279 {
 280         struct ia64_sal_retval isrv;
 281 
 282         if (sal_cache_flush_drops_interrupts) {
 283                 unsigned long flags;
 284                 u64 progress;
 285                 s64 rc;
 286 
 287                 progress = 0;
 288                 local_irq_save(flags);
 289                 rc = ia64_pal_cache_flush(cache_type,
 290                         PAL_CACHE_FLUSH_INVALIDATE, &progress, NULL);
 291                 local_irq_restore(flags);
 292                 return rc;
 293         }
 294 
 295         SAL_CALL(isrv, SAL_CACHE_FLUSH, cache_type, 0, 0, 0, 0, 0, 0);
 296         return isrv.status;
 297 }
 298 EXPORT_SYMBOL_GPL(ia64_sal_cache_flush);
 299 
 300 void __init
 301 ia64_sal_init (struct ia64_sal_systab *systab)
 302 {
 303         char *p;
 304         int i;
 305 
 306         if (!systab) {
 307                 printk(KERN_WARNING "Hmm, no SAL System Table.\n");
 308                 return;
 309         }
 310 
 311         if (strncmp(systab->signature, "SST_", 4) != 0)
 312                 printk(KERN_ERR "bad signature in system table!");
 313 
 314         check_versions(systab);
 315 #ifdef CONFIG_SMP
 316         chk_nointroute_opt();
 317 #endif
 318 
 319         /* revisions are coded in BCD, so %x does the job for us */
 320         printk(KERN_INFO "SAL %x.%x: %.32s %.32s%sversion %x.%x\n",
 321                         SAL_MAJOR(sal_revision), SAL_MINOR(sal_revision),
 322                         systab->oem_id, systab->product_id,
 323                         systab->product_id[0] ? " " : "",
 324                         SAL_MAJOR(sal_version), SAL_MINOR(sal_version));
 325 
 326         p = (char *) (systab + 1);
 327         for (i = 0; i < systab->entry_count; i++) {
 328                 /*
 329                  * The first byte of each entry type contains the type
 330                  * descriptor.
 331                  */
 332                 switch (*p) {
 333                 case SAL_DESC_ENTRY_POINT:
 334                         sal_desc_entry_point(p);
 335                         break;
 336                 case SAL_DESC_PLATFORM_FEATURE:
 337                         sal_desc_platform_feature(p);
 338                         break;
 339                 case SAL_DESC_PTC:
 340                         ia64_ptc_domain_info = (ia64_sal_desc_ptc_t *)p;
 341                         break;
 342                 case SAL_DESC_AP_WAKEUP:
 343                         sal_desc_ap_wakeup(p);
 344                         break;
 345                 }
 346                 p += SAL_DESC_SIZE(*p);
 347         }
 348 
 349 }
 350 
 351 int
 352 ia64_sal_oemcall(struct ia64_sal_retval *isrvp, u64 oemfunc, u64 arg1,
 353                  u64 arg2, u64 arg3, u64 arg4, u64 arg5, u64 arg6, u64 arg7)
 354 {
 355         if (oemfunc < IA64_SAL_OEMFUNC_MIN || oemfunc > IA64_SAL_OEMFUNC_MAX)
 356                 return -1;
 357         SAL_CALL(*isrvp, oemfunc, arg1, arg2, arg3, arg4, arg5, arg6, arg7);
 358         return 0;
 359 }
 360 EXPORT_SYMBOL(ia64_sal_oemcall);
 361 
 362 int
 363 ia64_sal_oemcall_nolock(struct ia64_sal_retval *isrvp, u64 oemfunc, u64 arg1,
 364                         u64 arg2, u64 arg3, u64 arg4, u64 arg5, u64 arg6,
 365                         u64 arg7)
 366 {
 367         if (oemfunc < IA64_SAL_OEMFUNC_MIN || oemfunc > IA64_SAL_OEMFUNC_MAX)
 368                 return -1;
 369         SAL_CALL_NOLOCK(*isrvp, oemfunc, arg1, arg2, arg3, arg4, arg5, arg6,
 370                         arg7);
 371         return 0;
 372 }
 373 EXPORT_SYMBOL(ia64_sal_oemcall_nolock);
 374 
 375 int
 376 ia64_sal_oemcall_reentrant(struct ia64_sal_retval *isrvp, u64 oemfunc,
 377                            u64 arg1, u64 arg2, u64 arg3, u64 arg4, u64 arg5,
 378                            u64 arg6, u64 arg7)
 379 {
 380         if (oemfunc < IA64_SAL_OEMFUNC_MIN || oemfunc > IA64_SAL_OEMFUNC_MAX)
 381                 return -1;
 382         SAL_CALL_REENTRANT(*isrvp, oemfunc, arg1, arg2, arg3, arg4, arg5, arg6,
 383                            arg7);
 384         return 0;
 385 }
 386 EXPORT_SYMBOL(ia64_sal_oemcall_reentrant);
 387 
 388 long
 389 ia64_sal_freq_base (unsigned long which, unsigned long *ticks_per_second,
 390                     unsigned long *drift_info)
 391 {
 392         struct ia64_sal_retval isrv;
 393 
 394         SAL_CALL(isrv, SAL_FREQ_BASE, which, 0, 0, 0, 0, 0, 0);
 395         *ticks_per_second = isrv.v0;
 396         *drift_info = isrv.v1;
 397         return isrv.status;
 398 }
 399 EXPORT_SYMBOL_GPL(ia64_sal_freq_base);

/* [<][>][^][v][top][bottom][index][help] */