drivers/watchdog/sch311x

/* [<][>][^][v][top][bottom][index][help] */
This source file includes following definitions.
sch311x_sio_enter
sch311x_sio_exit
sch311x_sio_inb
sch311x_sio_outb
sch311x_wdt_set_timeout
sch311x_wdt_start
sch311x_wdt_stop
sch311x_wdt_keepalive
sch311x_wdt_set_heartbeat
sch311x_wdt_get_status
sch311x_wdt_write
sch311x_wdt_ioctl
sch311x_wdt_open
sch311x_wdt_close
sch311x_wdt_probe
sch311x_wdt_remove
sch311x_wdt_shutdown
sch311x_detect
sch311x_wdt_init
sch311x_wdt_exit
   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  *      sch311x_wdt.c - Driver for the SCH311x Super-I/O chips
   4  *                      integrated watchdog.
   5  *
   6  *      (c) Copyright 2008 Wim Van Sebroeck <wim@iguana.be>.
   7  *
   8  *      Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
   9  *      provide warranty for any of this software. This material is
  10  *      provided "AS-IS" and at no charge.
  11  */
  12 
  13 /*
  14  *      Includes, defines, variables, module parameters, ...
  15  */
  16 
  17 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  18 
  19 /* Includes */
  20 #include <linux/module.h>               /* For module specific items */
  21 #include <linux/moduleparam.h>          /* For new moduleparam's */
  22 #include <linux/types.h>                /* For standard types (like size_t) */
  23 #include <linux/errno.h>                /* For the -ENODEV/... values */
  24 #include <linux/kernel.h>               /* For printk/... */
  25 #include <linux/miscdevice.h>           /* For struct miscdevice */
  26 #include <linux/watchdog.h>             /* For the watchdog specific items */
  27 #include <linux/init.h>                 /* For __init/__exit/... */
  28 #include <linux/fs.h>                   /* For file operations */
  29 #include <linux/platform_device.h>      /* For platform_driver framework */
  30 #include <linux/ioport.h>               /* For io-port access */
  31 #include <linux/spinlock.h>             /* For spin_lock/spin_unlock/... */
  32 #include <linux/uaccess.h>              /* For copy_to_user/put_user/... */
  33 #include <linux/io.h>                   /* For inb/outb/... */
  34 
  35 /* Module and version information */
  36 #define DRV_NAME        "sch311x_wdt"
  37 
  38 /* Runtime registers */
  39 #define GP60                    0x47
  40 #define WDT_TIME_OUT            0x65
  41 #define WDT_VAL                 0x66
  42 #define WDT_CFG                 0x67
  43 #define WDT_CTRL                0x68
  44 
  45 /* internal variables */
  46 static unsigned long sch311x_wdt_is_open;
  47 static char sch311x_wdt_expect_close;
  48 static struct platform_device *sch311x_wdt_pdev;
  49 
  50 static int sch311x_ioports[] = { 0x2e, 0x4e, 0x162e, 0x164e, 0x00 };
  51 
  52 static struct { /* The devices private data */
  53         /* the Runtime Register base address */
  54         unsigned short runtime_reg;
  55         /* The card's boot status */
  56         int boot_status;
  57         /* the lock for io operations */
  58         spinlock_t io_lock;
  59 } sch311x_wdt_data;
  60 
  61 /* Module load parameters */
  62 static unsigned short force_id;
  63 module_param(force_id, ushort, 0);
  64 MODULE_PARM_DESC(force_id, "Override the detected device ID");
  65 
  66 #define WATCHDOG_TIMEOUT 60             /* 60 sec default timeout */
  67 static int timeout = WATCHDOG_TIMEOUT;  /* in seconds */
  68 module_param(timeout, int, 0);
  69 MODULE_PARM_DESC(timeout,
  70         "Watchdog timeout in seconds. 1<= timeout <=15300, default="
  71                 __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
  72 
  73 static bool nowayout = WATCHDOG_NOWAYOUT;
  74 module_param(nowayout, bool, 0);
  75 MODULE_PARM_DESC(nowayout,
  76         "Watchdog cannot be stopped once started (default="
  77                 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
  78 
  79 /*
  80  *      Super-IO functions
  81  */
  82 
  83 static inline void sch311x_sio_enter(int sio_config_port)
  84 {
  85         outb(0x55, sio_config_port);
  86 }
  87 
  88 static inline void sch311x_sio_exit(int sio_config_port)
  89 {
  90         outb(0xaa, sio_config_port);
  91 }
  92 
  93 static inline int sch311x_sio_inb(int sio_config_port, int reg)
  94 {
  95         outb(reg, sio_config_port);
  96         return inb(sio_config_port + 1);
  97 }
  98 
  99 static inline void sch311x_sio_outb(int sio_config_port, int reg, int val)
 100 {
 101         outb(reg, sio_config_port);
 102         outb(val, sio_config_port + 1);
 103 }
 104 
 105 /*
 106  *      Watchdog Operations
 107  */
 108 
 109 static void sch311x_wdt_set_timeout(int t)
 110 {
 111         unsigned char timeout_unit = 0x80;
 112 
 113         /* When new timeout is bigger then 255 seconds, we will use minutes */
 114         if (t > 255) {
 115                 timeout_unit = 0;
 116                 t /= 60;
 117         }
 118 
 119         /* -- Watchdog Timeout --
 120          * Bit 0-6 (Reserved)
 121          * Bit 7   WDT Time-out Value Units Select
 122          *         (0 = Minutes, 1 = Seconds)
 123          */
 124         outb(timeout_unit, sch311x_wdt_data.runtime_reg + WDT_TIME_OUT);
 125 
 126         /* -- Watchdog Timer Time-out Value --
 127          * Bit 0-7 Binary coded units (0=Disabled, 1..255)
 128          */
 129         outb(t, sch311x_wdt_data.runtime_reg + WDT_VAL);
 130 }
 131 
 132 static void sch311x_wdt_start(void)
 133 {
 134         unsigned char t;
 135 
 136         spin_lock(&sch311x_wdt_data.io_lock);
 137 
 138         /* set watchdog's timeout */
 139         sch311x_wdt_set_timeout(timeout);
 140         /* enable the watchdog */
 141         /* -- General Purpose I/O Bit 6.0 --
 142          * Bit 0,   In/Out: 0 = Output, 1 = Input
 143          * Bit 1,   Polarity: 0 = No Invert, 1 = Invert
 144          * Bit 2-3, Function select: 00 = GPI/O, 01 = LED1, 11 = WDT,
 145          *                           10 = Either Edge Triggered Intr.4
 146          * Bit 4-6  (Reserved)
 147          * Bit 7,   Output Type: 0 = Push Pull Bit, 1 = Open Drain
 148          */
 149         t = inb(sch311x_wdt_data.runtime_reg + GP60);
 150         outb((t & ~0x0d) | 0x0c, sch311x_wdt_data.runtime_reg + GP60);
 151 
 152         spin_unlock(&sch311x_wdt_data.io_lock);
 153 
 154 }
 155 
 156 static void sch311x_wdt_stop(void)
 157 {
 158         unsigned char t;
 159 
 160         spin_lock(&sch311x_wdt_data.io_lock);
 161 
 162         /* stop the watchdog */
 163         t = inb(sch311x_wdt_data.runtime_reg + GP60);
 164         outb((t & ~0x0d) | 0x01, sch311x_wdt_data.runtime_reg + GP60);
 165         /* disable timeout by setting it to 0 */
 166         sch311x_wdt_set_timeout(0);
 167 
 168         spin_unlock(&sch311x_wdt_data.io_lock);
 169 }
 170 
 171 static void sch311x_wdt_keepalive(void)
 172 {
 173         spin_lock(&sch311x_wdt_data.io_lock);
 174         sch311x_wdt_set_timeout(timeout);
 175         spin_unlock(&sch311x_wdt_data.io_lock);
 176 }
 177 
 178 static int sch311x_wdt_set_heartbeat(int t)
 179 {
 180         if (t < 1 || t > (255*60))
 181                 return -EINVAL;
 182 
 183         /* When new timeout is bigger then 255 seconds,
 184          * we will round up to minutes (with a max of 255) */
 185         if (t > 255)
 186                 t = (((t - 1) / 60) + 1) * 60;
 187 
 188         timeout = t;
 189         return 0;
 190 }
 191 
 192 static void sch311x_wdt_get_status(int *status)
 193 {
 194         unsigned char new_status;
 195 
 196         *status = 0;
 197 
 198         spin_lock(&sch311x_wdt_data.io_lock);
 199 
 200         /* -- Watchdog timer control --
 201          * Bit 0   Status Bit: 0 = Timer counting, 1 = Timeout occurred
 202          * Bit 1   Reserved
 203          * Bit 2   Force Timeout: 1 = Forces WD timeout event (self-cleaning)
 204          * Bit 3   P20 Force Timeout enabled:
 205          *          0 = P20 activity does not generate the WD timeout event
 206          *          1 = P20 Allows rising edge of P20, from the keyboard
 207          *              controller, to force the WD timeout event.
 208          * Bit 4-7 Reserved
 209          */
 210         new_status = inb(sch311x_wdt_data.runtime_reg + WDT_CTRL);
 211         if (new_status & 0x01)
 212                 *status |= WDIOF_CARDRESET;
 213 
 214         spin_unlock(&sch311x_wdt_data.io_lock);
 215 }
 216 
 217 /*
 218  *      /dev/watchdog handling
 219  */
 220 
 221 static ssize_t sch311x_wdt_write(struct file *file, const char __user *buf,
 222                                                 size_t count, loff_t *ppos)
 223 {
 224         if (count) {
 225                 if (!nowayout) {
 226                         size_t i;
 227 
 228                         sch311x_wdt_expect_close = 0;
 229 
 230                         for (i = 0; i != count; i++) {
 231                                 char c;
 232                                 if (get_user(c, buf + i))
 233                                         return -EFAULT;
 234                                 if (c == 'V')
 235                                         sch311x_wdt_expect_close = 42;
 236                         }
 237                 }
 238                 sch311x_wdt_keepalive();
 239         }
 240         return count;
 241 }
 242 
 243 static long sch311x_wdt_ioctl(struct file *file, unsigned int cmd,
 244                                                         unsigned long arg)
 245 {
 246         int status;
 247         int new_timeout;
 248         void __user *argp = (void __user *)arg;
 249         int __user *p = argp;
 250         static const struct watchdog_info ident = {
 251                 .options                = WDIOF_KEEPALIVEPING |
 252                                           WDIOF_SETTIMEOUT |
 253                                           WDIOF_MAGICCLOSE,
 254                 .firmware_version       = 1,
 255                 .identity               = DRV_NAME,
 256         };
 257 
 258         switch (cmd) {
 259         case WDIOC_GETSUPPORT:
 260                 if (copy_to_user(argp, &ident, sizeof(ident)))
 261                         return -EFAULT;
 262                 break;
 263 
 264         case WDIOC_GETSTATUS:
 265         {
 266                 sch311x_wdt_get_status(&status);
 267                 return put_user(status, p);
 268         }
 269         case WDIOC_GETBOOTSTATUS:
 270                 return put_user(sch311x_wdt_data.boot_status, p);
 271 
 272         case WDIOC_SETOPTIONS:
 273         {
 274                 int options, retval = -EINVAL;
 275 
 276                 if (get_user(options, p))
 277                         return -EFAULT;
 278                 if (options & WDIOS_DISABLECARD) {
 279                         sch311x_wdt_stop();
 280                         retval = 0;
 281                 }
 282                 if (options & WDIOS_ENABLECARD) {
 283                         sch311x_wdt_start();
 284                         retval = 0;
 285                 }
 286                 return retval;
 287         }
 288         case WDIOC_KEEPALIVE:
 289                 sch311x_wdt_keepalive();
 290                 break;
 291 
 292         case WDIOC_SETTIMEOUT:
 293                 if (get_user(new_timeout, p))
 294                         return -EFAULT;
 295                 if (sch311x_wdt_set_heartbeat(new_timeout))
 296                         return -EINVAL;
 297                 sch311x_wdt_keepalive();
 298                 /* Fall through */
 299         case WDIOC_GETTIMEOUT:
 300                 return put_user(timeout, p);
 301         default:
 302                 return -ENOTTY;
 303         }
 304         return 0;
 305 }
 306 
 307 static int sch311x_wdt_open(struct inode *inode, struct file *file)
 308 {
 309         if (test_and_set_bit(0, &sch311x_wdt_is_open))
 310                 return -EBUSY;
 311         /*
 312          *      Activate
 313          */
 314         sch311x_wdt_start();
 315         return stream_open(inode, file);
 316 }
 317 
 318 static int sch311x_wdt_close(struct inode *inode, struct file *file)
 319 {
 320         if (sch311x_wdt_expect_close == 42) {
 321                 sch311x_wdt_stop();
 322         } else {
 323                 pr_crit("Unexpected close, not stopping watchdog!\n");
 324                 sch311x_wdt_keepalive();
 325         }
 326         clear_bit(0, &sch311x_wdt_is_open);
 327         sch311x_wdt_expect_close = 0;
 328         return 0;
 329 }
 330 
 331 /*
 332  *      Kernel Interfaces
 333  */
 334 
 335 static const struct file_operations sch311x_wdt_fops = {
 336         .owner          = THIS_MODULE,
 337         .llseek         = no_llseek,
 338         .write          = sch311x_wdt_write,
 339         .unlocked_ioctl = sch311x_wdt_ioctl,
 340         .open           = sch311x_wdt_open,
 341         .release        = sch311x_wdt_close,
 342 };
 343 
 344 static struct miscdevice sch311x_wdt_miscdev = {
 345         .minor  = WATCHDOG_MINOR,
 346         .name   = "watchdog",
 347         .fops   = &sch311x_wdt_fops,
 348 };
 349 
 350 /*
 351  *      Init & exit routines
 352  */
 353 
 354 static int sch311x_wdt_probe(struct platform_device *pdev)
 355 {
 356         struct device *dev = &pdev->dev;
 357         int err;
 358 
 359         spin_lock_init(&sch311x_wdt_data.io_lock);
 360 
 361         if (!request_region(sch311x_wdt_data.runtime_reg + GP60, 1, DRV_NAME)) {
 362                 dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n",
 363                         sch311x_wdt_data.runtime_reg + GP60,
 364                         sch311x_wdt_data.runtime_reg + GP60);
 365                 err = -EBUSY;
 366                 goto exit;
 367         }
 368 
 369         if (!request_region(sch311x_wdt_data.runtime_reg + WDT_TIME_OUT, 4,
 370                                                                 DRV_NAME)) {
 371                 dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n",
 372                         sch311x_wdt_data.runtime_reg + WDT_TIME_OUT,
 373                         sch311x_wdt_data.runtime_reg + WDT_CTRL);
 374                 err = -EBUSY;
 375                 goto exit_release_region;
 376         }
 377 
 378         /* Make sure that the watchdog is not running */
 379         sch311x_wdt_stop();
 380 
 381         /* Disable keyboard and mouse interaction and interrupt */
 382         /* -- Watchdog timer configuration --
 383          * Bit 0   Reserved
 384          * Bit 1   Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr.
 385          * Bit 2   Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr
 386          * Bit 3   Reserved
 387          * Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled,
 388          *            0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15)
 389          */
 390         outb(0, sch311x_wdt_data.runtime_reg + WDT_CFG);
 391 
 392         /* Check that the heartbeat value is within it's range ;
 393          * if not reset to the default */
 394         if (sch311x_wdt_set_heartbeat(timeout)) {
 395                 sch311x_wdt_set_heartbeat(WATCHDOG_TIMEOUT);
 396                 dev_info(dev, "timeout value must be 1<=x<=15300, using %d\n",
 397                         timeout);
 398         }
 399 
 400         /* Get status at boot */
 401         sch311x_wdt_get_status(&sch311x_wdt_data.boot_status);
 402 
 403         sch311x_wdt_miscdev.parent = dev;
 404 
 405         err = misc_register(&sch311x_wdt_miscdev);
 406         if (err != 0) {
 407                 dev_err(dev, "cannot register miscdev on minor=%d (err=%d)\n",
 408                                                         WATCHDOG_MINOR, err);
 409                 goto exit_release_region2;
 410         }
 411 
 412         dev_info(dev,
 413                 "SMSC SCH311x WDT initialized. timeout=%d sec (nowayout=%d)\n",
 414                 timeout, nowayout);
 415 
 416         return 0;
 417 
 418 exit_release_region2:
 419         release_region(sch311x_wdt_data.runtime_reg + WDT_TIME_OUT, 4);
 420 exit_release_region:
 421         release_region(sch311x_wdt_data.runtime_reg + GP60, 1);
 422         sch311x_wdt_data.runtime_reg = 0;
 423 exit:
 424         return err;
 425 }
 426 
 427 static int sch311x_wdt_remove(struct platform_device *pdev)
 428 {
 429         /* Stop the timer before we leave */
 430         if (!nowayout)
 431                 sch311x_wdt_stop();
 432 
 433         /* Deregister */
 434         misc_deregister(&sch311x_wdt_miscdev);
 435         release_region(sch311x_wdt_data.runtime_reg + WDT_TIME_OUT, 4);
 436         release_region(sch311x_wdt_data.runtime_reg + GP60, 1);
 437         sch311x_wdt_data.runtime_reg = 0;
 438         return 0;
 439 }
 440 
 441 static void sch311x_wdt_shutdown(struct platform_device *dev)
 442 {
 443         /* Turn the WDT off if we have a soft shutdown */
 444         sch311x_wdt_stop();
 445 }
 446 
 447 static struct platform_driver sch311x_wdt_driver = {
 448         .probe          = sch311x_wdt_probe,
 449         .remove         = sch311x_wdt_remove,
 450         .shutdown       = sch311x_wdt_shutdown,
 451         .driver         = {
 452                 .name = DRV_NAME,
 453         },
 454 };
 455 
 456 static int __init sch311x_detect(int sio_config_port, unsigned short *addr)
 457 {
 458         int err = 0, reg;
 459         unsigned short base_addr;
 460         unsigned char dev_id;
 461 
 462         sch311x_sio_enter(sio_config_port);
 463 
 464         /* Check device ID. We currently know about:
 465          * SCH3112 (0x7c), SCH3114 (0x7d), and SCH3116 (0x7f). */
 466         reg = force_id ? force_id : sch311x_sio_inb(sio_config_port, 0x20);
 467         if (!(reg == 0x7c || reg == 0x7d || reg == 0x7f)) {
 468                 err = -ENODEV;
 469                 goto exit;
 470         }
 471         dev_id = reg == 0x7c ? 2 : reg == 0x7d ? 4 : 6;
 472 
 473         /* Select logical device A (runtime registers) */
 474         sch311x_sio_outb(sio_config_port, 0x07, 0x0a);
 475 
 476         /* Check if Logical Device Register is currently active */
 477         if ((sch311x_sio_inb(sio_config_port, 0x30) & 0x01) == 0)
 478                 pr_info("Seems that LDN 0x0a is not active...\n");
 479 
 480         /* Get the base address of the runtime registers */
 481         base_addr = (sch311x_sio_inb(sio_config_port, 0x60) << 8) |
 482                            sch311x_sio_inb(sio_config_port, 0x61);
 483         if (!base_addr) {
 484                 pr_err("Base address not set\n");
 485                 err = -ENODEV;
 486                 goto exit;
 487         }
 488         *addr = base_addr;
 489 
 490         pr_info("Found an SMSC SCH311%d chip at 0x%04x\n", dev_id, base_addr);
 491 
 492 exit:
 493         sch311x_sio_exit(sio_config_port);
 494         return err;
 495 }
 496 
 497 static int __init sch311x_wdt_init(void)
 498 {
 499         int err, i, found = 0;
 500         unsigned short addr = 0;
 501 
 502         for (i = 0; !found && sch311x_ioports[i]; i++)
 503                 if (sch311x_detect(sch311x_ioports[i], &addr) == 0)
 504                         found++;
 505 
 506         if (!found)
 507                 return -ENODEV;
 508 
 509         sch311x_wdt_data.runtime_reg = addr;
 510 
 511         err = platform_driver_register(&sch311x_wdt_driver);
 512         if (err)
 513                 return err;
 514 
 515         sch311x_wdt_pdev = platform_device_register_simple(DRV_NAME, addr,
 516                                                                 NULL, 0);
 517 
 518         if (IS_ERR(sch311x_wdt_pdev)) {
 519                 err = PTR_ERR(sch311x_wdt_pdev);
 520                 goto unreg_platform_driver;
 521         }
 522 
 523         return 0;
 524 
 525 unreg_platform_driver:
 526         platform_driver_unregister(&sch311x_wdt_driver);
 527         return err;
 528 }
 529 
 530 static void __exit sch311x_wdt_exit(void)
 531 {
 532         platform_device_unregister(sch311x_wdt_pdev);
 533         platform_driver_unregister(&sch311x_wdt_driver);
 534 }
 535 
 536 module_init(sch311x_wdt_init);
 537 module_exit(sch311x_wdt_exit);
 538 
 539 MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>");
 540 MODULE_DESCRIPTION("SMSC SCH311x WatchDog Timer Driver");
 541 MODULE_LICENSE("GPL");
/* [<][>][^][v][top][bottom][index][help] */
root/drivers/watchdog/sch311x_wdt.c

DEFINITIONS
