root/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. linear_inter
  2. dsi_dphy_timing_calc_clk_zero
  3. msm_dsi_dphy_timing_calc
  4. msm_dsi_dphy_timing_calc_v2
  5. msm_dsi_dphy_timing_calc_v3
  6. msm_dsi_phy_set_src_pll
  7. dsi_phy_regulator_init
  8. dsi_phy_regulator_disable
  9. dsi_phy_regulator_enable
  10. dsi_phy_enable_resource
  11. dsi_phy_disable_resource
  12. dsi_phy_get_id
  13. msm_dsi_phy_init_common
  14. dsi_phy_driver_probe
  15. dsi_phy_driver_remove
  16. msm_dsi_phy_driver_register
  17. msm_dsi_phy_driver_unregister
  18. msm_dsi_phy_enable
  19. msm_dsi_phy_disable
  20. msm_dsi_phy_get_shared_timings
  21. msm_dsi_phy_get_pll
  22. msm_dsi_phy_set_usecase

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (c) 2015, The Linux Foundation. All rights reserved.
   4  */
   5 
   6 #include <linux/platform_device.h>
   7 
   8 #include "dsi_phy.h"
   9 
  10 #define S_DIV_ROUND_UP(n, d)    \
  11         (((n) >= 0) ? (((n) + (d) - 1) / (d)) : (((n) - (d) + 1) / (d)))
  12 
  13 static inline s32 linear_inter(s32 tmax, s32 tmin, s32 percent,
  14                                 s32 min_result, bool even)
  15 {
  16         s32 v;
  17 
  18         v = (tmax - tmin) * percent;
  19         v = S_DIV_ROUND_UP(v, 100) + tmin;
  20         if (even && (v & 0x1))
  21                 return max_t(s32, min_result, v - 1);
  22         else
  23                 return max_t(s32, min_result, v);
  24 }
  25 
  26 static void dsi_dphy_timing_calc_clk_zero(struct msm_dsi_dphy_timing *timing,
  27                                         s32 ui, s32 coeff, s32 pcnt)
  28 {
  29         s32 tmax, tmin, clk_z;
  30         s32 temp;
  31 
  32         /* reset */
  33         temp = 300 * coeff - ((timing->clk_prepare >> 1) + 1) * 2 * ui;
  34         tmin = S_DIV_ROUND_UP(temp, ui) - 2;
  35         if (tmin > 255) {
  36                 tmax = 511;
  37                 clk_z = linear_inter(2 * tmin, tmin, pcnt, 0, true);
  38         } else {
  39                 tmax = 255;
  40                 clk_z = linear_inter(tmax, tmin, pcnt, 0, true);
  41         }
  42 
  43         /* adjust */
  44         temp = (timing->hs_rqst + timing->clk_prepare + clk_z) & 0x7;
  45         timing->clk_zero = clk_z + 8 - temp;
  46 }
  47 
  48 int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing,
  49                              struct msm_dsi_phy_clk_request *clk_req)
  50 {
  51         const unsigned long bit_rate = clk_req->bitclk_rate;
  52         const unsigned long esc_rate = clk_req->escclk_rate;
  53         s32 ui, lpx;
  54         s32 tmax, tmin;
  55         s32 pcnt0 = 10;
  56         s32 pcnt1 = (bit_rate > 1200000000) ? 15 : 10;
  57         s32 pcnt2 = 10;
  58         s32 pcnt3 = (bit_rate > 180000000) ? 10 : 40;
  59         s32 coeff = 1000; /* Precision, should avoid overflow */
  60         s32 temp;
  61 
  62         if (!bit_rate || !esc_rate)
  63                 return -EINVAL;
  64 
  65         ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
  66         lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);
  67 
  68         tmax = S_DIV_ROUND_UP(95 * coeff, ui) - 2;
  69         tmin = S_DIV_ROUND_UP(38 * coeff, ui) - 2;
  70         timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, true);
  71 
  72         temp = lpx / ui;
  73         if (temp & 0x1)
  74                 timing->hs_rqst = temp;
  75         else
  76                 timing->hs_rqst = max_t(s32, 0, temp - 2);
  77 
  78         /* Calculate clk_zero after clk_prepare and hs_rqst */
  79         dsi_dphy_timing_calc_clk_zero(timing, ui, coeff, pcnt2);
  80 
  81         temp = 105 * coeff + 12 * ui - 20 * coeff;
  82         tmax = S_DIV_ROUND_UP(temp, ui) - 2;
  83         tmin = S_DIV_ROUND_UP(60 * coeff, ui) - 2;
  84         timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
  85 
  86         temp = 85 * coeff + 6 * ui;
  87         tmax = S_DIV_ROUND_UP(temp, ui) - 2;
  88         temp = 40 * coeff + 4 * ui;
  89         tmin = S_DIV_ROUND_UP(temp, ui) - 2;
  90         timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, true);
  91 
  92         tmax = 255;
  93         temp = ((timing->hs_prepare >> 1) + 1) * 2 * ui + 2 * ui;
  94         temp = 145 * coeff + 10 * ui - temp;
  95         tmin = S_DIV_ROUND_UP(temp, ui) - 2;
  96         timing->hs_zero = linear_inter(tmax, tmin, pcnt2, 24, true);
  97 
  98         temp = 105 * coeff + 12 * ui - 20 * coeff;
  99         tmax = S_DIV_ROUND_UP(temp, ui) - 2;
 100         temp = 60 * coeff + 4 * ui;
 101         tmin = DIV_ROUND_UP(temp, ui) - 2;
 102         timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
 103 
 104         tmax = 255;
 105         tmin = S_DIV_ROUND_UP(100 * coeff, ui) - 2;
 106         timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, true);
 107 
 108         tmax = 63;
 109         temp = ((timing->hs_exit >> 1) + 1) * 2 * ui;
 110         temp = 60 * coeff + 52 * ui - 24 * ui - temp;
 111         tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
 112         timing->shared_timings.clk_post = linear_inter(tmax, tmin, pcnt2, 0,
 113                                                        false);
 114         tmax = 63;
 115         temp = ((timing->clk_prepare >> 1) + 1) * 2 * ui;
 116         temp += ((timing->clk_zero >> 1) + 1) * 2 * ui;
 117         temp += 8 * ui + lpx;
 118         tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
 119         if (tmin > tmax) {
 120                 temp = linear_inter(2 * tmax, tmin, pcnt2, 0, false);
 121                 timing->shared_timings.clk_pre = temp >> 1;
 122                 timing->shared_timings.clk_pre_inc_by_2 = true;
 123         } else {
 124                 timing->shared_timings.clk_pre =
 125                                 linear_inter(tmax, tmin, pcnt2, 0, false);
 126                 timing->shared_timings.clk_pre_inc_by_2 = false;
 127         }
 128 
 129         timing->ta_go = 3;
 130         timing->ta_sure = 0;
 131         timing->ta_get = 4;
 132 
 133         DBG("PHY timings: %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
 134                 timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
 135                 timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero,
 136                 timing->clk_trail, timing->clk_prepare, timing->hs_exit,
 137                 timing->hs_zero, timing->hs_prepare, timing->hs_trail,
 138                 timing->hs_rqst);
 139 
 140         return 0;
 141 }
 142 
 143 int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing,
 144                                 struct msm_dsi_phy_clk_request *clk_req)
 145 {
 146         const unsigned long bit_rate = clk_req->bitclk_rate;
 147         const unsigned long esc_rate = clk_req->escclk_rate;
 148         s32 ui, ui_x8, lpx;
 149         s32 tmax, tmin;
 150         s32 pcnt0 = 50;
 151         s32 pcnt1 = 50;
 152         s32 pcnt2 = 10;
 153         s32 pcnt3 = 30;
 154         s32 pcnt4 = 10;
 155         s32 pcnt5 = 2;
 156         s32 coeff = 1000; /* Precision, should avoid overflow */
 157         s32 hb_en, hb_en_ckln, pd_ckln, pd;
 158         s32 val, val_ckln;
 159         s32 temp;
 160 
 161         if (!bit_rate || !esc_rate)
 162                 return -EINVAL;
 163 
 164         timing->hs_halfbyte_en = 0;
 165         hb_en = 0;
 166         timing->hs_halfbyte_en_ckln = 0;
 167         hb_en_ckln = 0;
 168         timing->hs_prep_dly_ckln = (bit_rate > 100000000) ? 0 : 3;
 169         pd_ckln = timing->hs_prep_dly_ckln;
 170         timing->hs_prep_dly = (bit_rate > 120000000) ? 0 : 1;
 171         pd = timing->hs_prep_dly;
 172 
 173         val = (hb_en << 2) + (pd << 1);
 174         val_ckln = (hb_en_ckln << 2) + (pd_ckln << 1);
 175 
 176         ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
 177         ui_x8 = ui << 3;
 178         lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);
 179 
 180         temp = S_DIV_ROUND_UP(38 * coeff - val_ckln * ui, ui_x8);
 181         tmin = max_t(s32, temp, 0);
 182         temp = (95 * coeff - val_ckln * ui) / ui_x8;
 183         tmax = max_t(s32, temp, 0);
 184         timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false);
 185 
 186         temp = 300 * coeff - ((timing->clk_prepare << 3) + val_ckln) * ui;
 187         tmin = S_DIV_ROUND_UP(temp - 11 * ui, ui_x8) - 3;
 188         tmax = (tmin > 255) ? 511 : 255;
 189         timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false);
 190 
 191         tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8);
 192         temp = 105 * coeff + 12 * ui - 20 * coeff;
 193         tmax = (temp + 3 * ui) / ui_x8;
 194         timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
 195 
 196         temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui - val * ui, ui_x8);
 197         tmin = max_t(s32, temp, 0);
 198         temp = (85 * coeff + 6 * ui - val * ui) / ui_x8;
 199         tmax = max_t(s32, temp, 0);
 200         timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false);
 201 
 202         temp = 145 * coeff + 10 * ui - ((timing->hs_prepare << 3) + val) * ui;
 203         tmin = S_DIV_ROUND_UP(temp - 11 * ui, ui_x8) - 3;
 204         tmax = 255;
 205         timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false);
 206 
 207         tmin = DIV_ROUND_UP(60 * coeff + 4 * ui + 3 * ui, ui_x8);
 208         temp = 105 * coeff + 12 * ui - 20 * coeff;
 209         tmax = (temp + 3 * ui) / ui_x8;
 210         timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
 211 
 212         temp = 50 * coeff + ((hb_en << 2) - 8) * ui;
 213         timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8);
 214 
 215         tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1;
 216         tmax = 255;
 217         timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false);
 218 
 219         temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui;
 220         timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8);
 221 
 222         temp = 60 * coeff + 52 * ui - 43 * ui;
 223         tmin = DIV_ROUND_UP(temp, ui_x8) - 1;
 224         tmax = 63;
 225         timing->shared_timings.clk_post =
 226                                 linear_inter(tmax, tmin, pcnt2, 0, false);
 227 
 228         temp = 8 * ui + ((timing->clk_prepare << 3) + val_ckln) * ui;
 229         temp += (((timing->clk_zero + 3) << 3) + 11 - (pd_ckln << 1)) * ui;
 230         temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) :
 231                                 (((timing->hs_rqst_ckln << 3) + 8) * ui);
 232         tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
 233         tmax = 63;
 234         if (tmin > tmax) {
 235                 temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false);
 236                 timing->shared_timings.clk_pre = temp >> 1;
 237                 timing->shared_timings.clk_pre_inc_by_2 = 1;
 238         } else {
 239                 timing->shared_timings.clk_pre =
 240                                 linear_inter(tmax, tmin, pcnt2, 0, false);
 241                 timing->shared_timings.clk_pre_inc_by_2 = 0;
 242         }
 243 
 244         timing->ta_go = 3;
 245         timing->ta_sure = 0;
 246         timing->ta_get = 4;
 247 
 248         DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
 249             timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
 250             timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero,
 251             timing->clk_trail, timing->clk_prepare, timing->hs_exit,
 252             timing->hs_zero, timing->hs_prepare, timing->hs_trail,
 253             timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en,
 254             timing->hs_halfbyte_en_ckln, timing->hs_prep_dly,
 255             timing->hs_prep_dly_ckln);
 256 
 257         return 0;
 258 }
 259 
 260 int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing,
 261         struct msm_dsi_phy_clk_request *clk_req)
 262 {
 263         const unsigned long bit_rate = clk_req->bitclk_rate;
 264         const unsigned long esc_rate = clk_req->escclk_rate;
 265         s32 ui, ui_x8, lpx;
 266         s32 tmax, tmin;
 267         s32 pcnt0 = 50;
 268         s32 pcnt1 = 50;
 269         s32 pcnt2 = 10;
 270         s32 pcnt3 = 30;
 271         s32 pcnt4 = 10;
 272         s32 pcnt5 = 2;
 273         s32 coeff = 1000; /* Precision, should avoid overflow */
 274         s32 hb_en, hb_en_ckln;
 275         s32 temp;
 276 
 277         if (!bit_rate || !esc_rate)
 278                 return -EINVAL;
 279 
 280         timing->hs_halfbyte_en = 0;
 281         hb_en = 0;
 282         timing->hs_halfbyte_en_ckln = 0;
 283         hb_en_ckln = 0;
 284 
 285         ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
 286         ui_x8 = ui << 3;
 287         lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);
 288 
 289         temp = S_DIV_ROUND_UP(38 * coeff, ui_x8);
 290         tmin = max_t(s32, temp, 0);
 291         temp = (95 * coeff) / ui_x8;
 292         tmax = max_t(s32, temp, 0);
 293         timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false);
 294 
 295         temp = 300 * coeff - (timing->clk_prepare << 3) * ui;
 296         tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
 297         tmax = (tmin > 255) ? 511 : 255;
 298         timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false);
 299 
 300         tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8);
 301         temp = 105 * coeff + 12 * ui - 20 * coeff;
 302         tmax = (temp + 3 * ui) / ui_x8;
 303         timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
 304 
 305         temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui, ui_x8);
 306         tmin = max_t(s32, temp, 0);
 307         temp = (85 * coeff + 6 * ui) / ui_x8;
 308         tmax = max_t(s32, temp, 0);
 309         timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false);
 310 
 311         temp = 145 * coeff + 10 * ui - (timing->hs_prepare << 3) * ui;
 312         tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
 313         tmax = 255;
 314         timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false);
 315 
 316         tmin = DIV_ROUND_UP(60 * coeff + 4 * ui, ui_x8) - 1;
 317         temp = 105 * coeff + 12 * ui - 20 * coeff;
 318         tmax = (temp / ui_x8) - 1;
 319         timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
 320 
 321         temp = 50 * coeff + ((hb_en << 2) - 8) * ui;
 322         timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8);
 323 
 324         tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1;
 325         tmax = 255;
 326         timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false);
 327 
 328         temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui;
 329         timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8);
 330 
 331         temp = 60 * coeff + 52 * ui - 43 * ui;
 332         tmin = DIV_ROUND_UP(temp, ui_x8) - 1;
 333         tmax = 63;
 334         timing->shared_timings.clk_post =
 335                 linear_inter(tmax, tmin, pcnt2, 0, false);
 336 
 337         temp = 8 * ui + (timing->clk_prepare << 3) * ui;
 338         temp += (((timing->clk_zero + 3) << 3) + 11) * ui;
 339         temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) :
 340                 (((timing->hs_rqst_ckln << 3) + 8) * ui);
 341         tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
 342         tmax = 63;
 343         if (tmin > tmax) {
 344                 temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false);
 345                 timing->shared_timings.clk_pre = temp >> 1;
 346                 timing->shared_timings.clk_pre_inc_by_2 = 1;
 347         } else {
 348                 timing->shared_timings.clk_pre =
 349                         linear_inter(tmax, tmin, pcnt2, 0, false);
 350                         timing->shared_timings.clk_pre_inc_by_2 = 0;
 351         }
 352 
 353         timing->ta_go = 3;
 354         timing->ta_sure = 0;
 355         timing->ta_get = 4;
 356 
 357         DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
 358                 timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
 359                 timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero,
 360                 timing->clk_trail, timing->clk_prepare, timing->hs_exit,
 361                 timing->hs_zero, timing->hs_prepare, timing->hs_trail,
 362                 timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en,
 363                 timing->hs_halfbyte_en_ckln, timing->hs_prep_dly,
 364                 timing->hs_prep_dly_ckln);
 365 
 366         return 0;
 367 }
 368 
 369 void msm_dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg,
 370                                 u32 bit_mask)
 371 {
 372         int phy_id = phy->id;
 373         u32 val;
 374 
 375         if ((phy_id >= DSI_MAX) || (pll_id >= DSI_MAX))
 376                 return;
 377 
 378         val = dsi_phy_read(phy->base + reg);
 379 
 380         if (phy->cfg->src_pll_truthtable[phy_id][pll_id])
 381                 dsi_phy_write(phy->base + reg, val | bit_mask);
 382         else
 383                 dsi_phy_write(phy->base + reg, val & (~bit_mask));
 384 }
 385 
 386 static int dsi_phy_regulator_init(struct msm_dsi_phy *phy)
 387 {
 388         struct regulator_bulk_data *s = phy->supplies;
 389         const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
 390         struct device *dev = &phy->pdev->dev;
 391         int num = phy->cfg->reg_cfg.num;
 392         int i, ret;
 393 
 394         for (i = 0; i < num; i++)
 395                 s[i].supply = regs[i].name;
 396 
 397         ret = devm_regulator_bulk_get(dev, num, s);
 398         if (ret < 0) {
 399                 if (ret != -EPROBE_DEFER) {
 400                         DRM_DEV_ERROR(dev,
 401                                       "%s: failed to init regulator, ret=%d\n",
 402                                       __func__, ret);
 403                 }
 404 
 405                 return ret;
 406         }
 407 
 408         return 0;
 409 }
 410 
 411 static void dsi_phy_regulator_disable(struct msm_dsi_phy *phy)
 412 {
 413         struct regulator_bulk_data *s = phy->supplies;
 414         const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
 415         int num = phy->cfg->reg_cfg.num;
 416         int i;
 417 
 418         DBG("");
 419         for (i = num - 1; i >= 0; i--)
 420                 if (regs[i].disable_load >= 0)
 421                         regulator_set_load(s[i].consumer, regs[i].disable_load);
 422 
 423         regulator_bulk_disable(num, s);
 424 }
 425 
 426 static int dsi_phy_regulator_enable(struct msm_dsi_phy *phy)
 427 {
 428         struct regulator_bulk_data *s = phy->supplies;
 429         const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
 430         struct device *dev = &phy->pdev->dev;
 431         int num = phy->cfg->reg_cfg.num;
 432         int ret, i;
 433 
 434         DBG("");
 435         for (i = 0; i < num; i++) {
 436                 if (regs[i].enable_load >= 0) {
 437                         ret = regulator_set_load(s[i].consumer,
 438                                                         regs[i].enable_load);
 439                         if (ret < 0) {
 440                                 DRM_DEV_ERROR(dev,
 441                                         "regulator %d set op mode failed, %d\n",
 442                                         i, ret);
 443                                 goto fail;
 444                         }
 445                 }
 446         }
 447 
 448         ret = regulator_bulk_enable(num, s);
 449         if (ret < 0) {
 450                 DRM_DEV_ERROR(dev, "regulator enable failed, %d\n", ret);
 451                 goto fail;
 452         }
 453 
 454         return 0;
 455 
 456 fail:
 457         for (i--; i >= 0; i--)
 458                 regulator_set_load(s[i].consumer, regs[i].disable_load);
 459         return ret;
 460 }
 461 
 462 static int dsi_phy_enable_resource(struct msm_dsi_phy *phy)
 463 {
 464         struct device *dev = &phy->pdev->dev;
 465         int ret;
 466 
 467         pm_runtime_get_sync(dev);
 468 
 469         ret = clk_prepare_enable(phy->ahb_clk);
 470         if (ret) {
 471                 DRM_DEV_ERROR(dev, "%s: can't enable ahb clk, %d\n", __func__, ret);
 472                 pm_runtime_put_sync(dev);
 473         }
 474 
 475         return ret;
 476 }
 477 
 478 static void dsi_phy_disable_resource(struct msm_dsi_phy *phy)
 479 {
 480         clk_disable_unprepare(phy->ahb_clk);
 481         pm_runtime_put_autosuspend(&phy->pdev->dev);
 482 }
 483 
 484 static const struct of_device_id dsi_phy_dt_match[] = {
 485 #ifdef CONFIG_DRM_MSM_DSI_28NM_PHY
 486         { .compatible = "qcom,dsi-phy-28nm-hpm",
 487           .data = &dsi_phy_28nm_hpm_cfgs },
 488         { .compatible = "qcom,dsi-phy-28nm-lp",
 489           .data = &dsi_phy_28nm_lp_cfgs },
 490 #endif
 491 #ifdef CONFIG_DRM_MSM_DSI_20NM_PHY
 492         { .compatible = "qcom,dsi-phy-20nm",
 493           .data = &dsi_phy_20nm_cfgs },
 494 #endif
 495 #ifdef CONFIG_DRM_MSM_DSI_28NM_8960_PHY
 496         { .compatible = "qcom,dsi-phy-28nm-8960",
 497           .data = &dsi_phy_28nm_8960_cfgs },
 498 #endif
 499 #ifdef CONFIG_DRM_MSM_DSI_14NM_PHY
 500         { .compatible = "qcom,dsi-phy-14nm",
 501           .data = &dsi_phy_14nm_cfgs },
 502 #endif
 503 #ifdef CONFIG_DRM_MSM_DSI_10NM_PHY
 504         { .compatible = "qcom,dsi-phy-10nm",
 505           .data = &dsi_phy_10nm_cfgs },
 506         { .compatible = "qcom,dsi-phy-10nm-8998",
 507           .data = &dsi_phy_10nm_8998_cfgs },
 508 #endif
 509         {}
 510 };
 511 
 512 /*
 513  * Currently, we only support one SoC for each PHY type. When we have multiple
 514  * SoCs for the same PHY, we can try to make the index searching a bit more
 515  * clever.
 516  */
 517 static int dsi_phy_get_id(struct msm_dsi_phy *phy)
 518 {
 519         struct platform_device *pdev = phy->pdev;
 520         const struct msm_dsi_phy_cfg *cfg = phy->cfg;
 521         struct resource *res;
 522         int i;
 523 
 524         res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dsi_phy");
 525         if (!res)
 526                 return -EINVAL;
 527 
 528         for (i = 0; i < cfg->num_dsi_phy; i++) {
 529                 if (cfg->io_start[i] == res->start)
 530                         return i;
 531         }
 532 
 533         return -EINVAL;
 534 }
 535 
 536 int msm_dsi_phy_init_common(struct msm_dsi_phy *phy)
 537 {
 538         struct platform_device *pdev = phy->pdev;
 539         int ret = 0;
 540 
 541         phy->reg_base = msm_ioremap(pdev, "dsi_phy_regulator",
 542                                 "DSI_PHY_REG");
 543         if (IS_ERR(phy->reg_base)) {
 544                 DRM_DEV_ERROR(&pdev->dev, "%s: failed to map phy regulator base\n",
 545                         __func__);
 546                 ret = -ENOMEM;
 547                 goto fail;
 548         }
 549 
 550 fail:
 551         return ret;
 552 }
 553 
 554 static int dsi_phy_driver_probe(struct platform_device *pdev)
 555 {
 556         struct msm_dsi_phy *phy;
 557         struct device *dev = &pdev->dev;
 558         const struct of_device_id *match;
 559         int ret;
 560 
 561         phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
 562         if (!phy)
 563                 return -ENOMEM;
 564 
 565         match = of_match_node(dsi_phy_dt_match, dev->of_node);
 566         if (!match)
 567                 return -ENODEV;
 568 
 569         phy->cfg = match->data;
 570         phy->pdev = pdev;
 571 
 572         phy->id = dsi_phy_get_id(phy);
 573         if (phy->id < 0) {
 574                 ret = phy->id;
 575                 DRM_DEV_ERROR(dev, "%s: couldn't identify PHY index, %d\n",
 576                         __func__, ret);
 577                 goto fail;
 578         }
 579 
 580         phy->regulator_ldo_mode = of_property_read_bool(dev->of_node,
 581                                 "qcom,dsi-phy-regulator-ldo-mode");
 582 
 583         phy->base = msm_ioremap(pdev, "dsi_phy", "DSI_PHY");
 584         if (IS_ERR(phy->base)) {
 585                 DRM_DEV_ERROR(dev, "%s: failed to map phy base\n", __func__);
 586                 ret = -ENOMEM;
 587                 goto fail;
 588         }
 589 
 590         ret = dsi_phy_regulator_init(phy);
 591         if (ret)
 592                 goto fail;
 593 
 594         phy->ahb_clk = msm_clk_get(pdev, "iface");
 595         if (IS_ERR(phy->ahb_clk)) {
 596                 DRM_DEV_ERROR(dev, "%s: Unable to get ahb clk\n", __func__);
 597                 ret = PTR_ERR(phy->ahb_clk);
 598                 goto fail;
 599         }
 600 
 601         if (phy->cfg->ops.init) {
 602                 ret = phy->cfg->ops.init(phy);
 603                 if (ret)
 604                         goto fail;
 605         }
 606 
 607         /* PLL init will call into clk_register which requires
 608          * register access, so we need to enable power and ahb clock.
 609          */
 610         ret = dsi_phy_enable_resource(phy);
 611         if (ret)
 612                 goto fail;
 613 
 614         phy->pll = msm_dsi_pll_init(pdev, phy->cfg->type, phy->id);
 615         if (IS_ERR_OR_NULL(phy->pll)) {
 616                 DRM_DEV_INFO(dev,
 617                         "%s: pll init failed: %ld, need separate pll clk driver\n",
 618                         __func__, PTR_ERR(phy->pll));
 619                 phy->pll = NULL;
 620         }
 621 
 622         dsi_phy_disable_resource(phy);
 623 
 624         platform_set_drvdata(pdev, phy);
 625 
 626         return 0;
 627 
 628 fail:
 629         return ret;
 630 }
 631 
 632 static int dsi_phy_driver_remove(struct platform_device *pdev)
 633 {
 634         struct msm_dsi_phy *phy = platform_get_drvdata(pdev);
 635 
 636         if (phy && phy->pll) {
 637                 msm_dsi_pll_destroy(phy->pll);
 638                 phy->pll = NULL;
 639         }
 640 
 641         platform_set_drvdata(pdev, NULL);
 642 
 643         return 0;
 644 }
 645 
 646 static struct platform_driver dsi_phy_platform_driver = {
 647         .probe      = dsi_phy_driver_probe,
 648         .remove     = dsi_phy_driver_remove,
 649         .driver     = {
 650                 .name   = "msm_dsi_phy",
 651                 .of_match_table = dsi_phy_dt_match,
 652         },
 653 };
 654 
 655 void __init msm_dsi_phy_driver_register(void)
 656 {
 657         platform_driver_register(&dsi_phy_platform_driver);
 658 }
 659 
 660 void __exit msm_dsi_phy_driver_unregister(void)
 661 {
 662         platform_driver_unregister(&dsi_phy_platform_driver);
 663 }
 664 
 665 int msm_dsi_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
 666                         struct msm_dsi_phy_clk_request *clk_req)
 667 {
 668         struct device *dev = &phy->pdev->dev;
 669         int ret;
 670 
 671         if (!phy || !phy->cfg->ops.enable)
 672                 return -EINVAL;
 673 
 674         ret = dsi_phy_enable_resource(phy);
 675         if (ret) {
 676                 DRM_DEV_ERROR(dev, "%s: resource enable failed, %d\n",
 677                         __func__, ret);
 678                 goto res_en_fail;
 679         }
 680 
 681         ret = dsi_phy_regulator_enable(phy);
 682         if (ret) {
 683                 DRM_DEV_ERROR(dev, "%s: regulator enable failed, %d\n",
 684                         __func__, ret);
 685                 goto reg_en_fail;
 686         }
 687 
 688         ret = phy->cfg->ops.enable(phy, src_pll_id, clk_req);
 689         if (ret) {
 690                 DRM_DEV_ERROR(dev, "%s: phy enable failed, %d\n", __func__, ret);
 691                 goto phy_en_fail;
 692         }
 693 
 694         /*
 695          * Resetting DSI PHY silently changes its PLL registers to reset status,
 696          * which will confuse clock driver and result in wrong output rate of
 697          * link clocks. Restore PLL status if its PLL is being used as clock
 698          * source.
 699          */
 700         if (phy->usecase != MSM_DSI_PHY_SLAVE) {
 701                 ret = msm_dsi_pll_restore_state(phy->pll);
 702                 if (ret) {
 703                         DRM_DEV_ERROR(dev, "%s: failed to restore pll state, %d\n",
 704                                 __func__, ret);
 705                         goto pll_restor_fail;
 706                 }
 707         }
 708 
 709         return 0;
 710 
 711 pll_restor_fail:
 712         if (phy->cfg->ops.disable)
 713                 phy->cfg->ops.disable(phy);
 714 phy_en_fail:
 715         dsi_phy_regulator_disable(phy);
 716 reg_en_fail:
 717         dsi_phy_disable_resource(phy);
 718 res_en_fail:
 719         return ret;
 720 }
 721 
 722 void msm_dsi_phy_disable(struct msm_dsi_phy *phy)
 723 {
 724         if (!phy || !phy->cfg->ops.disable)
 725                 return;
 726 
 727         phy->cfg->ops.disable(phy);
 728 
 729         dsi_phy_regulator_disable(phy);
 730         dsi_phy_disable_resource(phy);
 731 }
 732 
 733 void msm_dsi_phy_get_shared_timings(struct msm_dsi_phy *phy,
 734                         struct msm_dsi_phy_shared_timings *shared_timings)
 735 {
 736         memcpy(shared_timings, &phy->timing.shared_timings,
 737                sizeof(*shared_timings));
 738 }
 739 
 740 struct msm_dsi_pll *msm_dsi_phy_get_pll(struct msm_dsi_phy *phy)
 741 {
 742         if (!phy)
 743                 return NULL;
 744 
 745         return phy->pll;
 746 }
 747 
 748 void msm_dsi_phy_set_usecase(struct msm_dsi_phy *phy,
 749                              enum msm_dsi_phy_usecase uc)
 750 {
 751         if (phy)
 752                 phy->usecase = uc;
 753 }

/* [<][>][^][v][top][bottom][index][help] */