root/drivers/leds/leds-lt3593.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. lt3593_led_set
  2. lt3593_led_probe

   1 // SPDX-License-Identifier: GPL-2.0
   2 // Copyright (c) 2009,2018 Daniel Mack <daniel@zonque.org>
   3 
   4 #include <linux/kernel.h>
   5 #include <linux/platform_device.h>
   6 #include <linux/leds.h>
   7 #include <linux/delay.h>
   8 #include <linux/gpio.h>
   9 #include <linux/gpio/consumer.h>
  10 #include <linux/slab.h>
  11 #include <linux/module.h>
  12 #include <linux/of.h>
  13 
  14 #define LED_LT3593_NAME "lt3593"
  15 
  16 struct lt3593_led_data {
  17         struct led_classdev cdev;
  18         struct gpio_desc *gpiod;
  19 };
  20 
  21 static int lt3593_led_set(struct led_classdev *led_cdev,
  22                            enum led_brightness value)
  23 {
  24         struct lt3593_led_data *led_dat =
  25                 container_of(led_cdev, struct lt3593_led_data, cdev);
  26         int pulses;
  27 
  28         /*
  29          * The LT3593 resets its internal current level register to the maximum
  30          * level on the first falling edge on the control pin. Each following
  31          * falling edge decreases the current level by 625uA. Up to 32 pulses
  32          * can be sent, so the maximum power reduction is 20mA.
  33          * After a timeout of 128us, the value is taken from the register and
  34          * applied is to the output driver.
  35          */
  36 
  37         if (value == 0) {
  38                 gpiod_set_value_cansleep(led_dat->gpiod, 0);
  39                 return 0;
  40         }
  41 
  42         pulses = 32 - (value * 32) / 255;
  43 
  44         if (pulses == 0) {
  45                 gpiod_set_value_cansleep(led_dat->gpiod, 0);
  46                 mdelay(1);
  47                 gpiod_set_value_cansleep(led_dat->gpiod, 1);
  48                 return 0;
  49         }
  50 
  51         gpiod_set_value_cansleep(led_dat->gpiod, 1);
  52 
  53         while (pulses--) {
  54                 gpiod_set_value_cansleep(led_dat->gpiod, 0);
  55                 udelay(1);
  56                 gpiod_set_value_cansleep(led_dat->gpiod, 1);
  57                 udelay(1);
  58         }
  59 
  60         return 0;
  61 }
  62 
  63 static int lt3593_led_probe(struct platform_device *pdev)
  64 {
  65         struct device *dev = &pdev->dev;
  66         struct lt3593_led_data *led_data;
  67         struct fwnode_handle *child;
  68         int ret, state = LEDS_GPIO_DEFSTATE_OFF;
  69         struct led_init_data init_data = {};
  70         const char *tmp;
  71 
  72         if (!dev->of_node)
  73                 return -ENODEV;
  74 
  75         led_data = devm_kzalloc(dev, sizeof(*led_data), GFP_KERNEL);
  76         if (!led_data)
  77                 return -ENOMEM;
  78 
  79         if (device_get_child_node_count(dev) != 1) {
  80                 dev_err(dev, "Device must have exactly one LED sub-node.");
  81                 return -EINVAL;
  82         }
  83 
  84         led_data->gpiod = devm_gpiod_get(dev, "lltc,ctrl", 0);
  85         if (IS_ERR(led_data->gpiod))
  86                 return PTR_ERR(led_data->gpiod);
  87 
  88         child = device_get_next_child_node(dev, NULL);
  89 
  90         fwnode_property_read_string(child, "linux,default-trigger",
  91                                     &led_data->cdev.default_trigger);
  92 
  93         if (!fwnode_property_read_string(child, "default-state", &tmp)) {
  94                 if (!strcmp(tmp, "on"))
  95                         state = LEDS_GPIO_DEFSTATE_ON;
  96         }
  97 
  98         led_data->cdev.brightness_set_blocking = lt3593_led_set;
  99         led_data->cdev.brightness = state ? LED_FULL : LED_OFF;
 100 
 101         init_data.fwnode = child;
 102         init_data.devicename = LED_LT3593_NAME;
 103         init_data.default_label = ":";
 104 
 105         ret = devm_led_classdev_register_ext(dev, &led_data->cdev, &init_data);
 106         if (ret < 0) {
 107                 fwnode_handle_put(child);
 108                 return ret;
 109         }
 110 
 111         led_data->cdev.dev->of_node = dev->of_node;
 112         platform_set_drvdata(pdev, led_data);
 113 
 114         return 0;
 115 }
 116 
 117 static const struct of_device_id of_lt3593_leds_match[] = {
 118         { .compatible = "lltc,lt3593", },
 119         {},
 120 };
 121 MODULE_DEVICE_TABLE(of, of_lt3593_leds_match);
 122 
 123 static struct platform_driver lt3593_led_driver = {
 124         .probe          = lt3593_led_probe,
 125         .driver         = {
 126                 .name   = "leds-lt3593",
 127                 .of_match_table = of_match_ptr(of_lt3593_leds_match),
 128         },
 129 };
 130 
 131 module_platform_driver(lt3593_led_driver);
 132 
 133 MODULE_AUTHOR("Daniel Mack <daniel@zonque.org>");
 134 MODULE_DESCRIPTION("LED driver for LT3593 controllers");
 135 MODULE_LICENSE("GPL v2");
 136 MODULE_ALIAS("platform:leds-lt3593");

/* [<][>][^][v][top][bottom][index][help] */