This source file includes following definitions.
- bd6107_write
- bd6107_backlight_update_status
- bd6107_backlight_check_fb
- bd6107_probe
- bd6107_remove
1
2
3
4
5
6
7
8
9
10 #include <linux/backlight.h>
11 #include <linux/delay.h>
12 #include <linux/err.h>
13 #include <linux/fb.h>
14 #include <linux/gpio.h>
15 #include <linux/i2c.h>
16 #include <linux/module.h>
17 #include <linux/platform_data/bd6107.h>
18 #include <linux/slab.h>
19
20 #define BD6107_PSCNT1 0x00
21 #define BD6107_PSCNT1_PSCNTREG2 (1 << 2)
22 #define BD6107_PSCNT1_PSCNTREG1 (1 << 0)
23 #define BD6107_REGVSET 0x02
24 #define BD6107_REGVSET_REG1VSET_2_85V (1 << 2)
25 #define BD6107_REGVSET_REG1VSET_2_80V (0 << 2)
26 #define BD6107_LEDCNT1 0x03
27 #define BD6107_LEDCNT1_LEDONOFF2 (1 << 1)
28 #define BD6107_LEDCNT1_LEDONOFF1 (1 << 0)
29 #define BD6107_PORTSEL 0x04
30 #define BD6107_PORTSEL_LEDM(n) (1 << (n))
31 #define BD6107_RGB1CNT1 0x05
32 #define BD6107_RGB1CNT2 0x06
33 #define BD6107_RGB1CNT3 0x07
34 #define BD6107_RGB1CNT4 0x08
35 #define BD6107_RGB1CNT5 0x09
36 #define BD6107_RGB1FLM 0x0a
37 #define BD6107_RGB2CNT1 0x0b
38 #define BD6107_RGB2CNT2 0x0c
39 #define BD6107_RGB2CNT3 0x0d
40 #define BD6107_RGB2CNT4 0x0e
41 #define BD6107_RGB2CNT5 0x0f
42 #define BD6107_RGB2FLM 0x10
43 #define BD6107_PSCONT3 0x11
44 #define BD6107_SMMONCNT 0x12
45 #define BD6107_DCDCCNT 0x13
46 #define BD6107_IOSEL 0x14
47 #define BD6107_OUT1 0x15
48 #define BD6107_OUT2 0x16
49 #define BD6107_MASK1 0x17
50 #define BD6107_MASK2 0x18
51 #define BD6107_FACTOR1 0x19
52 #define BD6107_FACTOR2 0x1a
53 #define BD6107_CLRFACT1 0x1b
54 #define BD6107_CLRFACT2 0x1c
55 #define BD6107_STATE1 0x1d
56 #define BD6107_LSIVER 0x1e
57 #define BD6107_GRPSEL 0x1f
58 #define BD6107_LEDCNT2 0x20
59 #define BD6107_LEDCNT3 0x21
60 #define BD6107_MCURRENT 0x22
61 #define BD6107_MAINCNT1 0x23
62 #define BD6107_MAINCNT2 0x24
63 #define BD6107_SLOPECNT 0x25
64 #define BD6107_MSLOPE 0x26
65 #define BD6107_RGBSLOPE 0x27
66 #define BD6107_TEST 0x29
67 #define BD6107_SFTRST 0x2a
68 #define BD6107_SFTRSTGD 0x2b
69
70 struct bd6107 {
71 struct i2c_client *client;
72 struct backlight_device *backlight;
73 struct bd6107_platform_data *pdata;
74 };
75
76 static int bd6107_write(struct bd6107 *bd, u8 reg, u8 data)
77 {
78 return i2c_smbus_write_byte_data(bd->client, reg, data);
79 }
80
81 static int bd6107_backlight_update_status(struct backlight_device *backlight)
82 {
83 struct bd6107 *bd = bl_get_data(backlight);
84 int brightness = backlight->props.brightness;
85
86 if (backlight->props.power != FB_BLANK_UNBLANK ||
87 backlight->props.fb_blank != FB_BLANK_UNBLANK ||
88 backlight->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
89 brightness = 0;
90
91 if (brightness) {
92 bd6107_write(bd, BD6107_PORTSEL, BD6107_PORTSEL_LEDM(2) |
93 BD6107_PORTSEL_LEDM(1) | BD6107_PORTSEL_LEDM(0));
94 bd6107_write(bd, BD6107_MAINCNT1, brightness);
95 bd6107_write(bd, BD6107_LEDCNT1, BD6107_LEDCNT1_LEDONOFF1);
96 } else {
97 gpio_set_value(bd->pdata->reset, 0);
98 msleep(24);
99 gpio_set_value(bd->pdata->reset, 1);
100 }
101
102 return 0;
103 }
104
105 static int bd6107_backlight_check_fb(struct backlight_device *backlight,
106 struct fb_info *info)
107 {
108 struct bd6107 *bd = bl_get_data(backlight);
109
110 return bd->pdata->fbdev == NULL || bd->pdata->fbdev == info->dev;
111 }
112
113 static const struct backlight_ops bd6107_backlight_ops = {
114 .options = BL_CORE_SUSPENDRESUME,
115 .update_status = bd6107_backlight_update_status,
116 .check_fb = bd6107_backlight_check_fb,
117 };
118
119 static int bd6107_probe(struct i2c_client *client,
120 const struct i2c_device_id *id)
121 {
122 struct bd6107_platform_data *pdata = dev_get_platdata(&client->dev);
123 struct backlight_device *backlight;
124 struct backlight_properties props;
125 struct bd6107 *bd;
126 int ret;
127
128 if (pdata == NULL || !pdata->reset) {
129 dev_err(&client->dev, "No reset GPIO in platform data\n");
130 return -EINVAL;
131 }
132
133 if (!i2c_check_functionality(client->adapter,
134 I2C_FUNC_SMBUS_BYTE_DATA)) {
135 dev_warn(&client->dev,
136 "I2C adapter doesn't support I2C_FUNC_SMBUS_BYTE\n");
137 return -EIO;
138 }
139
140 bd = devm_kzalloc(&client->dev, sizeof(*bd), GFP_KERNEL);
141 if (!bd)
142 return -ENOMEM;
143
144 bd->client = client;
145 bd->pdata = pdata;
146
147 ret = devm_gpio_request_one(&client->dev, pdata->reset,
148 GPIOF_DIR_OUT | GPIOF_INIT_LOW, "reset");
149 if (ret < 0) {
150 dev_err(&client->dev, "unable to request reset GPIO\n");
151 return ret;
152 }
153
154 memset(&props, 0, sizeof(props));
155 props.type = BACKLIGHT_RAW;
156 props.max_brightness = 128;
157 props.brightness = clamp_t(unsigned int, pdata->def_value, 0,
158 props.max_brightness);
159
160 backlight = devm_backlight_device_register(&client->dev,
161 dev_name(&client->dev),
162 &bd->client->dev, bd,
163 &bd6107_backlight_ops, &props);
164 if (IS_ERR(backlight)) {
165 dev_err(&client->dev, "failed to register backlight\n");
166 return PTR_ERR(backlight);
167 }
168
169 backlight_update_status(backlight);
170 i2c_set_clientdata(client, backlight);
171
172 return 0;
173 }
174
175 static int bd6107_remove(struct i2c_client *client)
176 {
177 struct backlight_device *backlight = i2c_get_clientdata(client);
178
179 backlight->props.brightness = 0;
180 backlight_update_status(backlight);
181
182 return 0;
183 }
184
185 static const struct i2c_device_id bd6107_ids[] = {
186 { "bd6107", 0 },
187 { }
188 };
189 MODULE_DEVICE_TABLE(i2c, bd6107_ids);
190
191 static struct i2c_driver bd6107_driver = {
192 .driver = {
193 .name = "bd6107",
194 },
195 .probe = bd6107_probe,
196 .remove = bd6107_remove,
197 .id_table = bd6107_ids,
198 };
199
200 module_i2c_driver(bd6107_driver);
201
202 MODULE_DESCRIPTION("Rohm BD6107 Backlight Driver");
203 MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
204 MODULE_LICENSE("GPL");