This source file includes following definitions.
- tosa_bl_set_backlight
- tosa_bl_update_status
- tosa_bl_get_brightness
- tosa_bl_probe
- tosa_bl_remove
- tosa_bl_suspend
- tosa_bl_resume
1
2
3
4
5
6
7
8
9 #include <linux/kernel.h>
10 #include <linux/module.h>
11 #include <linux/device.h>
12 #include <linux/spi/spi.h>
13 #include <linux/i2c.h>
14 #include <linux/gpio.h>
15 #include <linux/fb.h>
16 #include <linux/backlight.h>
17 #include <linux/slab.h>
18
19 #include <asm/mach/sharpsl_param.h>
20
21 #include <mach/tosa.h>
22
23 #define COMADJ_DEFAULT 97
24
25 #define DAC_CH1 0
26 #define DAC_CH2 1
27
28 struct tosa_bl_data {
29 struct i2c_client *i2c;
30 struct backlight_device *bl;
31
32 int comadj;
33 };
34
35 static void tosa_bl_set_backlight(struct tosa_bl_data *data, int brightness)
36 {
37 struct spi_device *spi = dev_get_platdata(&data->i2c->dev);
38
39 i2c_smbus_write_byte_data(data->i2c, DAC_CH1, data->comadj);
40
41
42 i2c_smbus_write_byte_data(data->i2c, DAC_CH2, (u8)(brightness & 0xff));
43
44
45 gpio_set_value(TOSA_GPIO_BL_C20MA, brightness & 0x100);
46
47 tosa_bl_enable(spi, brightness);
48 }
49
50 static int tosa_bl_update_status(struct backlight_device *dev)
51 {
52 struct backlight_properties *props = &dev->props;
53 struct tosa_bl_data *data = bl_get_data(dev);
54 int power = max(props->power, props->fb_blank);
55 int brightness = props->brightness;
56
57 if (power)
58 brightness = 0;
59
60 tosa_bl_set_backlight(data, brightness);
61
62 return 0;
63 }
64
65 static int tosa_bl_get_brightness(struct backlight_device *dev)
66 {
67 struct backlight_properties *props = &dev->props;
68
69 return props->brightness;
70 }
71
72 static const struct backlight_ops bl_ops = {
73 .get_brightness = tosa_bl_get_brightness,
74 .update_status = tosa_bl_update_status,
75 };
76
77 static int tosa_bl_probe(struct i2c_client *client,
78 const struct i2c_device_id *id)
79 {
80 struct backlight_properties props;
81 struct tosa_bl_data *data;
82 int ret = 0;
83
84 data = devm_kzalloc(&client->dev, sizeof(struct tosa_bl_data),
85 GFP_KERNEL);
86 if (!data)
87 return -ENOMEM;
88
89 data->comadj = sharpsl_param.comadj == -1 ? COMADJ_DEFAULT : sharpsl_param.comadj;
90
91 ret = devm_gpio_request_one(&client->dev, TOSA_GPIO_BL_C20MA,
92 GPIOF_OUT_INIT_LOW, "backlight");
93 if (ret) {
94 dev_dbg(&data->bl->dev, "Unable to request gpio!\n");
95 return ret;
96 }
97
98 i2c_set_clientdata(client, data);
99 data->i2c = client;
100
101 memset(&props, 0, sizeof(struct backlight_properties));
102 props.type = BACKLIGHT_RAW;
103 props.max_brightness = 512 - 1;
104 data->bl = devm_backlight_device_register(&client->dev, "tosa-bl",
105 &client->dev, data, &bl_ops,
106 &props);
107 if (IS_ERR(data->bl)) {
108 ret = PTR_ERR(data->bl);
109 goto err_reg;
110 }
111
112 data->bl->props.brightness = 69;
113 data->bl->props.power = FB_BLANK_UNBLANK;
114
115 backlight_update_status(data->bl);
116
117 return 0;
118
119 err_reg:
120 data->bl = NULL;
121 return ret;
122 }
123
124 static int tosa_bl_remove(struct i2c_client *client)
125 {
126 struct tosa_bl_data *data = i2c_get_clientdata(client);
127
128 data->bl = NULL;
129 return 0;
130 }
131
132 #ifdef CONFIG_PM_SLEEP
133 static int tosa_bl_suspend(struct device *dev)
134 {
135 struct tosa_bl_data *data = dev_get_drvdata(dev);
136
137 tosa_bl_set_backlight(data, 0);
138
139 return 0;
140 }
141
142 static int tosa_bl_resume(struct device *dev)
143 {
144 struct tosa_bl_data *data = dev_get_drvdata(dev);
145
146 backlight_update_status(data->bl);
147 return 0;
148 }
149 #endif
150
151 static SIMPLE_DEV_PM_OPS(tosa_bl_pm_ops, tosa_bl_suspend, tosa_bl_resume);
152
153 static const struct i2c_device_id tosa_bl_id[] = {
154 { "tosa-bl", 0 },
155 { },
156 };
157 MODULE_DEVICE_TABLE(i2c, tosa_bl_id);
158
159 static struct i2c_driver tosa_bl_driver = {
160 .driver = {
161 .name = "tosa-bl",
162 .pm = &tosa_bl_pm_ops,
163 },
164 .probe = tosa_bl_probe,
165 .remove = tosa_bl_remove,
166 .id_table = tosa_bl_id,
167 };
168
169 module_i2c_driver(tosa_bl_driver);
170
171 MODULE_AUTHOR("Dmitry Baryshkov");
172 MODULE_LICENSE("GPL v2");
173 MODULE_DESCRIPTION("LCD/Backlight control for Sharp SL-6000 PDA");
174