This source file includes following definitions.
- backlight_power_set
- pm860x_backlight_set
- pm860x_backlight_update_status
- pm860x_backlight_get_brightness
- pm860x_backlight_dt_init
- pm860x_backlight_probe
1
2
3
4
5
6
7
8
9 #include <linux/init.h>
10 #include <linux/kernel.h>
11 #include <linux/of.h>
12 #include <linux/platform_device.h>
13 #include <linux/slab.h>
14 #include <linux/fb.h>
15 #include <linux/i2c.h>
16 #include <linux/backlight.h>
17 #include <linux/mfd/88pm860x.h>
18 #include <linux/module.h>
19
20 #define MAX_BRIGHTNESS (0xFF)
21 #define MIN_BRIGHTNESS (0)
22
23 #define CURRENT_BITMASK (0x1F << 1)
24
25 struct pm860x_backlight_data {
26 struct pm860x_chip *chip;
27 struct i2c_client *i2c;
28 int current_brightness;
29 int port;
30 int pwm;
31 int iset;
32 int reg_duty_cycle;
33 int reg_always_on;
34 int reg_current;
35 };
36
37 static int backlight_power_set(struct pm860x_chip *chip, int port,
38 int on)
39 {
40 int ret = -EINVAL;
41
42 switch (port) {
43 case 0:
44 ret = on ? pm8606_osc_enable(chip, WLED1_DUTY) :
45 pm8606_osc_disable(chip, WLED1_DUTY);
46 break;
47 case 1:
48 ret = on ? pm8606_osc_enable(chip, WLED2_DUTY) :
49 pm8606_osc_disable(chip, WLED2_DUTY);
50 break;
51 case 2:
52 ret = on ? pm8606_osc_enable(chip, WLED3_DUTY) :
53 pm8606_osc_disable(chip, WLED3_DUTY);
54 break;
55 }
56 return ret;
57 }
58
59 static int pm860x_backlight_set(struct backlight_device *bl, int brightness)
60 {
61 struct pm860x_backlight_data *data = bl_get_data(bl);
62 struct pm860x_chip *chip = data->chip;
63 unsigned char value;
64 int ret;
65
66 if (brightness > MAX_BRIGHTNESS)
67 value = MAX_BRIGHTNESS;
68 else
69 value = brightness;
70
71 if (brightness)
72 backlight_power_set(chip, data->port, 1);
73
74 ret = pm860x_reg_write(data->i2c, data->reg_duty_cycle, value);
75 if (ret < 0)
76 goto out;
77
78 if ((data->current_brightness == 0) && brightness) {
79 if (data->iset) {
80 ret = pm860x_set_bits(data->i2c, data->reg_current,
81 CURRENT_BITMASK, data->iset);
82 if (ret < 0)
83 goto out;
84 }
85 if (data->pwm) {
86 ret = pm860x_set_bits(data->i2c, PM8606_PWM,
87 PM8606_PWM_FREQ_MASK, data->pwm);
88 if (ret < 0)
89 goto out;
90 }
91 if (brightness == MAX_BRIGHTNESS) {
92
93 ret = pm860x_set_bits(data->i2c, data->reg_always_on,
94 PM8606_WLED_ON, PM8606_WLED_ON);
95 }
96 } else {
97 if (brightness == MAX_BRIGHTNESS) {
98
99 ret = pm860x_set_bits(data->i2c, data->reg_always_on,
100 PM8606_WLED_ON, PM8606_WLED_ON);
101 } else {
102
103 ret = pm860x_set_bits(data->i2c, data->reg_always_on,
104 PM8606_WLED_ON, 0);
105 }
106 }
107 if (ret < 0)
108 goto out;
109
110 if (brightness == 0)
111 backlight_power_set(chip, data->port, 0);
112
113 dev_dbg(chip->dev, "set brightness %d\n", value);
114 data->current_brightness = value;
115 return 0;
116 out:
117 dev_dbg(chip->dev, "set brightness %d failure with return value: %d\n",
118 value, ret);
119 return ret;
120 }
121
122 static int pm860x_backlight_update_status(struct backlight_device *bl)
123 {
124 int brightness = bl->props.brightness;
125
126 if (bl->props.power != FB_BLANK_UNBLANK)
127 brightness = 0;
128
129 if (bl->props.fb_blank != FB_BLANK_UNBLANK)
130 brightness = 0;
131
132 if (bl->props.state & BL_CORE_SUSPENDED)
133 brightness = 0;
134
135 return pm860x_backlight_set(bl, brightness);
136 }
137
138 static int pm860x_backlight_get_brightness(struct backlight_device *bl)
139 {
140 struct pm860x_backlight_data *data = bl_get_data(bl);
141 struct pm860x_chip *chip = data->chip;
142 int ret;
143
144 ret = pm860x_reg_read(data->i2c, data->reg_duty_cycle);
145 if (ret < 0)
146 goto out;
147 data->current_brightness = ret;
148 dev_dbg(chip->dev, "get brightness %d\n", data->current_brightness);
149 return data->current_brightness;
150 out:
151 return -EINVAL;
152 }
153
154 static const struct backlight_ops pm860x_backlight_ops = {
155 .options = BL_CORE_SUSPENDRESUME,
156 .update_status = pm860x_backlight_update_status,
157 .get_brightness = pm860x_backlight_get_brightness,
158 };
159
160 #ifdef CONFIG_OF
161 static int pm860x_backlight_dt_init(struct platform_device *pdev,
162 struct pm860x_backlight_data *data,
163 char *name)
164 {
165 struct device_node *nproot, *np;
166 int iset = 0;
167
168 nproot = of_get_child_by_name(pdev->dev.parent->of_node, "backlights");
169 if (!nproot) {
170 dev_err(&pdev->dev, "failed to find backlights node\n");
171 return -ENODEV;
172 }
173 for_each_child_of_node(nproot, np) {
174 if (of_node_name_eq(np, name)) {
175 of_property_read_u32(np, "marvell,88pm860x-iset",
176 &iset);
177 data->iset = PM8606_WLED_CURRENT(iset);
178 of_property_read_u32(np, "marvell,88pm860x-pwm",
179 &data->pwm);
180 of_node_put(np);
181 break;
182 }
183 }
184 of_node_put(nproot);
185 return 0;
186 }
187 #else
188 #define pm860x_backlight_dt_init(x, y, z) (-1)
189 #endif
190
191 static int pm860x_backlight_probe(struct platform_device *pdev)
192 {
193 struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
194 struct pm860x_backlight_pdata *pdata = dev_get_platdata(&pdev->dev);
195 struct pm860x_backlight_data *data;
196 struct backlight_device *bl;
197 struct resource *res;
198 struct backlight_properties props;
199 char name[MFD_NAME_SIZE];
200 int ret = 0;
201
202 data = devm_kzalloc(&pdev->dev, sizeof(struct pm860x_backlight_data),
203 GFP_KERNEL);
204 if (data == NULL)
205 return -ENOMEM;
206 res = platform_get_resource_byname(pdev, IORESOURCE_REG, "duty cycle");
207 if (!res) {
208 dev_err(&pdev->dev, "No REG resource for duty cycle\n");
209 return -ENXIO;
210 }
211 data->reg_duty_cycle = res->start;
212 res = platform_get_resource_byname(pdev, IORESOURCE_REG, "always on");
213 if (!res) {
214 dev_err(&pdev->dev, "No REG resource for always on\n");
215 return -ENXIO;
216 }
217 data->reg_always_on = res->start;
218 res = platform_get_resource_byname(pdev, IORESOURCE_REG, "current");
219 if (!res) {
220 dev_err(&pdev->dev, "No REG resource for current\n");
221 return -ENXIO;
222 }
223 data->reg_current = res->start;
224
225 memset(name, 0, MFD_NAME_SIZE);
226 sprintf(name, "backlight-%d", pdev->id);
227 data->port = pdev->id;
228 data->chip = chip;
229 data->i2c = (chip->id == CHIP_PM8606) ? chip->client : chip->companion;
230 data->current_brightness = MAX_BRIGHTNESS;
231 if (pm860x_backlight_dt_init(pdev, data, name)) {
232 if (pdata) {
233 data->pwm = pdata->pwm;
234 data->iset = pdata->iset;
235 }
236 }
237
238 memset(&props, 0, sizeof(struct backlight_properties));
239 props.type = BACKLIGHT_RAW;
240 props.max_brightness = MAX_BRIGHTNESS;
241 bl = devm_backlight_device_register(&pdev->dev, name, &pdev->dev, data,
242 &pm860x_backlight_ops, &props);
243 if (IS_ERR(bl)) {
244 dev_err(&pdev->dev, "failed to register backlight\n");
245 return PTR_ERR(bl);
246 }
247 bl->props.brightness = MAX_BRIGHTNESS;
248
249 platform_set_drvdata(pdev, bl);
250
251
252 ret = pm860x_backlight_get_brightness(bl);
253 if (ret < 0)
254 return ret;
255
256 backlight_update_status(bl);
257 return 0;
258 }
259
260 static struct platform_driver pm860x_backlight_driver = {
261 .driver = {
262 .name = "88pm860x-backlight",
263 },
264 .probe = pm860x_backlight_probe,
265 };
266
267 module_platform_driver(pm860x_backlight_driver);
268
269 MODULE_DESCRIPTION("Backlight Driver for Marvell Semiconductor 88PM8606");
270 MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
271 MODULE_LICENSE("GPL");
272 MODULE_ALIAS("platform:88pm860x-backlight");