drivers/video/fbdev/au1100fb.c

/* [<][>][^][v][top][bottom][index][help] */
This source file includes following definitions.
au1100fb_fb_blank
au1100fb_setmode
au1100fb_fb_setcolreg
au1100fb_fb_pan_display
au1100fb_fb_mmap
au1100fb_setup
au1100fb_drv_probe
au1100fb_drv_remove
au1100fb_drv_suspend
au1100fb_drv_resume
   1 /*
   2  * BRIEF MODULE DESCRIPTION
   3  *      Au1100 LCD Driver.
   4  *
   5  * Rewritten for 2.6 by Embedded Alley Solutions
   6  *      <source@embeddedalley.com>, based on submissions by
   7  *      Karl Lessard <klessard@sunrisetelecom.com>
   8  *      <c.pellegrin@exadron.com>
   9  *
  10  * PM support added by Rodolfo Giometti <giometti@linux.it>
  11  * Cursor enable/disable by Rodolfo Giometti <giometti@linux.it>
  12  *
  13  * Copyright 2002 MontaVista Software
  14  * Author: MontaVista Software, Inc.
  15  *              ppopov@mvista.com or source@mvista.com
  16  *
  17  * Copyright 2002 Alchemy Semiconductor
  18  * Author: Alchemy Semiconductor
  19  *
  20  * Based on:
  21  * linux/drivers/video/skeletonfb.c -- Skeleton for a frame buffer device
  22  *  Created 28 Dec 1997 by Geert Uytterhoeven
  23  *
  24  *  This program is free software; you can redistribute  it and/or modify it
  25  *  under  the terms of  the GNU General  Public License as published by the
  26  *  Free Software Foundation;  either version 2 of the  License, or (at your
  27  *  option) any later version.
  28  *
  29  *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
  30  *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
  31  *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
  32  *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
  33  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  34  *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
  35  *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  36  *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
  37  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  38  *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  39  *
  40  *  You should have received a copy of the  GNU General Public License along
  41  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  42  *  675 Mass Ave, Cambridge, MA 02139, USA.
  43  */
  44 #include <linux/clk.h>
  45 #include <linux/module.h>
  46 #include <linux/kernel.h>
  47 #include <linux/errno.h>
  48 #include <linux/string.h>
  49 #include <linux/mm.h>
  50 #include <linux/fb.h>
  51 #include <linux/init.h>
  52 #include <linux/interrupt.h>
  53 #include <linux/ctype.h>
  54 #include <linux/dma-mapping.h>
  55 #include <linux/platform_device.h>
  56 #include <linux/slab.h>
  57 
  58 #include <asm/mach-au1x00/au1000.h>
  59 
  60 #define DEBUG 0
  61 
  62 #include "au1100fb.h"
  63 
  64 #define DRIVER_NAME "au1100fb"
  65 #define DRIVER_DESC "LCD controller driver for AU1100 processors"
  66 
  67 #define to_au1100fb_device(_info) \
  68           (_info ? container_of(_info, struct au1100fb_device, info) : NULL);
  69 
  70 /* Bitfields format supported by the controller. Note that the order of formats
  71  * SHOULD be the same as in the LCD_CONTROL_SBPPF field, so we can retrieve the
  72  * right pixel format by doing rgb_bitfields[LCD_CONTROL_SBPPF_XXX >> LCD_CONTROL_SBPPF]
  73  */
  74 struct fb_bitfield rgb_bitfields[][4] =
  75 {
  76         /*     Red,        Green,        Blue,       Transp   */
  77         { { 10, 6, 0 }, { 5, 5, 0 }, { 0, 5, 0 }, { 0, 0, 0 } },
  78         { { 11, 5, 0 }, { 5, 6, 0 }, { 0, 5, 0 }, { 0, 0, 0 } },
  79         { { 11, 5, 0 }, { 6, 5, 0 }, { 0, 6, 0 }, { 0, 0, 0 } },
  80         { { 10, 5, 0 }, { 5, 5, 0 }, { 0, 5, 0 }, { 15, 1, 0 } },
  81         { { 11, 5, 0 }, { 6, 5, 0 }, { 1, 5, 0 }, { 0, 1, 0 } },
  82 
  83         /* The last is used to describe 12bpp format */
  84         { { 8, 4, 0 },  { 4, 4, 0 }, { 0, 4, 0 }, { 0, 0, 0 } },
  85 };
  86 
  87 static struct fb_fix_screeninfo au1100fb_fix = {
  88         .id             = "AU1100 FB",
  89         .xpanstep       = 1,
  90         .ypanstep       = 1,
  91         .type           = FB_TYPE_PACKED_PIXELS,
  92         .accel          = FB_ACCEL_NONE,
  93 };
  94 
  95 static struct fb_var_screeninfo au1100fb_var = {
  96         .activate       = FB_ACTIVATE_NOW,
  97         .height         = -1,
  98         .width          = -1,
  99         .vmode          = FB_VMODE_NONINTERLACED,
 100 };
 101 
 102 /* fb_blank
 103  * Blank the screen. Depending on the mode, the screen will be
 104  * activated with the backlight color, or desactivated
 105  */
 106 static int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
 107 {
 108         struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
 109 
 110         print_dbg("fb_blank %d %p", blank_mode, fbi);
 111 
 112         switch (blank_mode) {
 113 
 114         case VESA_NO_BLANKING:
 115                 /* Turn on panel */
 116                 fbdev->regs->lcd_control |= LCD_CONTROL_GO;
 117                 wmb(); /* drain writebuffer */
 118                 break;
 119 
 120         case VESA_VSYNC_SUSPEND:
 121         case VESA_HSYNC_SUSPEND:
 122         case VESA_POWERDOWN:
 123                 /* Turn off panel */
 124                 fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
 125                 wmb(); /* drain writebuffer */
 126                 break;
 127         default:
 128                 break;
 129 
 130         }
 131         return 0;
 132 }
 133 
 134 /*
 135  * Set hardware with var settings. This will enable the controller with a specific
 136  * mode, normally validated with the fb_check_var method
 137          */
 138 int au1100fb_setmode(struct au1100fb_device *fbdev)
 139 {
 140         struct fb_info *info = &fbdev->info;
 141         u32 words;
 142         int index;
 143 
 144         if (!fbdev)
 145                 return -EINVAL;
 146 
 147         /* Update var-dependent FB info */
 148         if (panel_is_active(fbdev->panel) || panel_is_color(fbdev->panel)) {
 149                 if (info->var.bits_per_pixel <= 8) {
 150                         /* palettized */
 151                         info->var.red.offset    = 0;
 152                         info->var.red.length    = info->var.bits_per_pixel;
 153                         info->var.red.msb_right = 0;
 154 
 155                         info->var.green.offset  = 0;
 156                         info->var.green.length  = info->var.bits_per_pixel;
 157                         info->var.green.msb_right = 0;
 158 
 159                         info->var.blue.offset   = 0;
 160                         info->var.blue.length   = info->var.bits_per_pixel;
 161                         info->var.blue.msb_right = 0;
 162 
 163                         info->var.transp.offset = 0;
 164                         info->var.transp.length = 0;
 165                         info->var.transp.msb_right = 0;
 166 
 167                         info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
 168                         info->fix.line_length = info->var.xres_virtual /
 169                                                         (8/info->var.bits_per_pixel);
 170                 } else {
 171                         /* non-palettized */
 172                         index = (fbdev->panel->control_base & LCD_CONTROL_SBPPF_MASK) >> LCD_CONTROL_SBPPF_BIT;
 173                         info->var.red = rgb_bitfields[index][0];
 174                         info->var.green = rgb_bitfields[index][1];
 175                         info->var.blue = rgb_bitfields[index][2];
 176                         info->var.transp = rgb_bitfields[index][3];
 177 
 178                         info->fix.visual = FB_VISUAL_TRUECOLOR;
 179                         info->fix.line_length = info->var.xres_virtual << 1; /* depth=16 */
 180                 }
 181         } else {
 182                 /* mono */
 183                 info->fix.visual = FB_VISUAL_MONO10;
 184                 info->fix.line_length = info->var.xres_virtual / 8;
 185         }
 186 
 187         info->screen_size = info->fix.line_length * info->var.yres_virtual;
 188         info->var.rotate = ((fbdev->panel->control_base&LCD_CONTROL_SM_MASK) \
 189                                 >> LCD_CONTROL_SM_BIT) * 90;
 190 
 191         /* Determine BPP mode and format */
 192         fbdev->regs->lcd_control = fbdev->panel->control_base;
 193         fbdev->regs->lcd_horztiming = fbdev->panel->horztiming;
 194         fbdev->regs->lcd_verttiming = fbdev->panel->verttiming;
 195         fbdev->regs->lcd_clkcontrol = fbdev->panel->clkcontrol_base;
 196         fbdev->regs->lcd_intenable = 0;
 197         fbdev->regs->lcd_intstatus = 0;
 198         fbdev->regs->lcd_dmaaddr0 = LCD_DMA_SA_N(fbdev->fb_phys);
 199 
 200         if (panel_is_dual(fbdev->panel)) {
 201                 /* Second panel display seconf half of screen if possible,
 202                  * otherwise display the same as the first panel */
 203                 if (info->var.yres_virtual >= (info->var.yres << 1)) {
 204                         fbdev->regs->lcd_dmaaddr1 = LCD_DMA_SA_N(fbdev->fb_phys +
 205                                                           (info->fix.line_length *
 206                                                           (info->var.yres_virtual >> 1)));
 207                 } else {
 208                         fbdev->regs->lcd_dmaaddr1 = LCD_DMA_SA_N(fbdev->fb_phys);
 209                 }
 210         }
 211 
 212         words = info->fix.line_length / sizeof(u32);
 213         if (!info->var.rotate || (info->var.rotate == 180)) {
 214                 words *= info->var.yres_virtual;
 215                 if (info->var.rotate /* 180 */) {
 216                         words -= (words % 8); /* should be divisable by 8 */
 217                 }
 218         }
 219         fbdev->regs->lcd_words = LCD_WRD_WRDS_N(words);
 220 
 221         fbdev->regs->lcd_pwmdiv = 0;
 222         fbdev->regs->lcd_pwmhi = 0;
 223 
 224         /* Resume controller */
 225         fbdev->regs->lcd_control |= LCD_CONTROL_GO;
 226         mdelay(10);
 227         au1100fb_fb_blank(VESA_NO_BLANKING, info);
 228 
 229         return 0;
 230 }
 231 
 232 /* fb_setcolreg
 233  * Set color in LCD palette.
 234  */
 235 int au1100fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *fbi)
 236 {
 237         struct au1100fb_device *fbdev;
 238         u32 *palette;
 239         u32 value;
 240 
 241         fbdev = to_au1100fb_device(fbi);
 242         palette = fbdev->regs->lcd_pallettebase;
 243 
 244         if (regno > (AU1100_LCD_NBR_PALETTE_ENTRIES - 1))
 245                 return -EINVAL;
 246 
 247         if (fbi->var.grayscale) {
 248                 /* Convert color to grayscale */
 249                 red = green = blue =
 250                         (19595 * red + 38470 * green + 7471 * blue) >> 16;
 251         }
 252 
 253         if (fbi->fix.visual == FB_VISUAL_TRUECOLOR) {
 254                 /* Place color in the pseudopalette */
 255                 if (regno > 16)
 256                         return -EINVAL;
 257 
 258                 palette = (u32*)fbi->pseudo_palette;
 259 
 260                 red   >>= (16 - fbi->var.red.length);
 261                 green >>= (16 - fbi->var.green.length);
 262                 blue  >>= (16 - fbi->var.blue.length);
 263 
 264                 value = (red   << fbi->var.red.offset)  |
 265                         (green << fbi->var.green.offset)|
 266                         (blue  << fbi->var.blue.offset);
 267                 value &= 0xFFFF;
 268 
 269         } else if (panel_is_active(fbdev->panel)) {
 270                 /* COLOR TFT PALLETTIZED (use RGB 565) */
 271                 value = (red & 0xF800)|((green >> 5) & 0x07E0)|((blue >> 11) & 0x001F);
 272                 value &= 0xFFFF;
 273 
 274         } else if (panel_is_color(fbdev->panel)) {
 275                 /* COLOR STN MODE */
 276                 value = (((panel_swap_rgb(fbdev->panel) ? blue : red) >> 12) & 0x000F) |
 277                         ((green >> 8) & 0x00F0) |
 278                         (((panel_swap_rgb(fbdev->panel) ? red : blue) >> 4) & 0x0F00);
 279                 value &= 0xFFF;
 280         } else {
 281                 /* MONOCHROME MODE */
 282                 value = (green >> 12) & 0x000F;
 283                 value &= 0xF;
 284         }
 285 
 286         palette[regno] = value;
 287 
 288         return 0;
 289 }
 290 
 291 /* fb_pan_display
 292  * Pan display in x and/or y as specified
 293  */
 294 int au1100fb_fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *fbi)
 295 {
 296         struct au1100fb_device *fbdev;
 297         int dy;
 298 
 299         fbdev = to_au1100fb_device(fbi);
 300 
 301         print_dbg("fb_pan_display %p %p", var, fbi);
 302 
 303         if (!var || !fbdev) {
 304                 return -EINVAL;
 305         }
 306 
 307         if (var->xoffset - fbi->var.xoffset) {
 308                 /* No support for X panning for now! */
 309                 return -EINVAL;
 310         }
 311 
 312         print_dbg("fb_pan_display 2 %p %p", var, fbi);
 313         dy = var->yoffset - fbi->var.yoffset;
 314         if (dy) {
 315 
 316                 u32 dmaaddr;
 317 
 318                 print_dbg("Panning screen of %d lines", dy);
 319 
 320                 dmaaddr = fbdev->regs->lcd_dmaaddr0;
 321                 dmaaddr += (fbi->fix.line_length * dy);
 322 
 323                 /* TODO: Wait for current frame to finished */
 324                 fbdev->regs->lcd_dmaaddr0 = LCD_DMA_SA_N(dmaaddr);
 325 
 326                 if (panel_is_dual(fbdev->panel)) {
 327                         dmaaddr = fbdev->regs->lcd_dmaaddr1;
 328                         dmaaddr += (fbi->fix.line_length * dy);
 329                         fbdev->regs->lcd_dmaaddr0 = LCD_DMA_SA_N(dmaaddr);
 330         }
 331         }
 332         print_dbg("fb_pan_display 3 %p %p", var, fbi);
 333 
 334         return 0;
 335 }
 336 
 337 /* fb_mmap
 338  * Map video memory in user space. We don't use the generic fb_mmap method mainly
 339  * to allow the use of the TLB streaming flag (CCA=6)
 340  */
 341 int au1100fb_fb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
 342 {
 343         struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
 344 
 345         pgprot_val(vma->vm_page_prot) |= (6 << 9); //CCA=6
 346 
 347         return dma_mmap_coherent(fbdev->dev, vma, fbdev->fb_mem, fbdev->fb_phys,
 348                         fbdev->fb_len);
 349 }
 350 
 351 static struct fb_ops au1100fb_ops =
 352 {
 353         .owner                  = THIS_MODULE,
 354         .fb_setcolreg           = au1100fb_fb_setcolreg,
 355         .fb_blank               = au1100fb_fb_blank,
 356         .fb_pan_display         = au1100fb_fb_pan_display,
 357         .fb_fillrect            = cfb_fillrect,
 358         .fb_copyarea            = cfb_copyarea,
 359         .fb_imageblit           = cfb_imageblit,
 360         .fb_mmap                = au1100fb_fb_mmap,
 361 };
 362 
 363 
 364 /*-------------------------------------------------------------------------*/
 365 
 366 static int au1100fb_setup(struct au1100fb_device *fbdev)
 367 {
 368         char *this_opt, *options;
 369         int num_panels = ARRAY_SIZE(known_lcd_panels);
 370 
 371         if (num_panels <= 0) {
 372                 print_err("No LCD panels supported by driver!");
 373                 return -ENODEV;
 374         }
 375 
 376         if (fb_get_options(DRIVER_NAME, &options))
 377                 return -ENODEV;
 378         if (!options)
 379                 return -ENODEV;
 380 
 381         while ((this_opt = strsep(&options, ",")) != NULL) {
 382                 /* Panel option */
 383                 if (!strncmp(this_opt, "panel:", 6)) {
 384                         int i;
 385                         this_opt += 6;
 386                         for (i = 0; i < num_panels; i++) {
 387                                 if (!strncmp(this_opt, known_lcd_panels[i].name,
 388                                              strlen(this_opt))) {
 389                                         fbdev->panel = &known_lcd_panels[i];
 390                                         fbdev->panel_idx = i;
 391                                         break;
 392                                 }
 393                         }
 394                         if (i >= num_panels) {
 395                                 print_warn("Panel '%s' not supported!", this_opt);
 396                                 return -ENODEV;
 397                         }
 398                 }
 399                 /* Unsupported option */
 400                 else
 401                         print_warn("Unsupported option \"%s\"", this_opt);
 402         }
 403 
 404         print_info("Panel=%s", fbdev->panel->name);
 405 
 406         return 0;
 407 }
 408 
 409 static int au1100fb_drv_probe(struct platform_device *dev)
 410 {
 411         struct au1100fb_device *fbdev;
 412         struct resource *regs_res;
 413         struct clk *c;
 414 
 415         /* Allocate new device private */
 416         fbdev = devm_kzalloc(&dev->dev, sizeof(*fbdev), GFP_KERNEL);
 417         if (!fbdev)
 418                 return -ENOMEM;
 419 
 420         if (au1100fb_setup(fbdev))
 421                 goto failed;
 422 
 423         platform_set_drvdata(dev, (void *)fbdev);
 424         fbdev->dev = &dev->dev;
 425 
 426         /* Allocate region for our registers and map them */
 427         regs_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
 428         if (!regs_res) {
 429                 print_err("fail to retrieve registers resource");
 430                 return -EFAULT;
 431         }
 432 
 433         au1100fb_fix.mmio_start = regs_res->start;
 434         au1100fb_fix.mmio_len = resource_size(regs_res);
 435 
 436         if (!devm_request_mem_region(&dev->dev,
 437                                      au1100fb_fix.mmio_start,
 438                                      au1100fb_fix.mmio_len,
 439                                      DRIVER_NAME)) {
 440                 print_err("fail to lock memory region at 0x%08lx",
 441                                 au1100fb_fix.mmio_start);
 442                 return -EBUSY;
 443         }
 444 
 445         fbdev->regs = (struct au1100fb_regs*)KSEG1ADDR(au1100fb_fix.mmio_start);
 446 
 447         print_dbg("Register memory map at %p", fbdev->regs);
 448         print_dbg("phys=0x%08x, size=%d", fbdev->regs_phys, fbdev->regs_len);
 449 
 450         c = clk_get(NULL, "lcd_intclk");
 451         if (!IS_ERR(c)) {
 452                 fbdev->lcdclk = c;
 453                 clk_set_rate(c, 48000000);
 454                 clk_prepare_enable(c);
 455         }
 456 
 457         /* Allocate the framebuffer to the maximum screen size * nbr of video buffers */
 458         fbdev->fb_len = fbdev->panel->xres * fbdev->panel->yres *
 459                         (fbdev->panel->bpp >> 3) * AU1100FB_NBR_VIDEO_BUFFERS;
 460 
 461         fbdev->fb_mem = dmam_alloc_coherent(&dev->dev,
 462                                             PAGE_ALIGN(fbdev->fb_len),
 463                                             &fbdev->fb_phys, GFP_KERNEL);
 464         if (!fbdev->fb_mem) {
 465                 print_err("fail to allocate framebuffer (size: %dK))",
 466                           fbdev->fb_len / 1024);
 467                 return -ENOMEM;
 468         }
 469 
 470         au1100fb_fix.smem_start = fbdev->fb_phys;
 471         au1100fb_fix.smem_len = fbdev->fb_len;
 472 
 473         print_dbg("Framebuffer memory map at %p", fbdev->fb_mem);
 474         print_dbg("phys=0x%08x, size=%dK", fbdev->fb_phys, fbdev->fb_len / 1024);
 475 
 476         /* load the panel info into the var struct */
 477         au1100fb_var.bits_per_pixel = fbdev->panel->bpp;
 478         au1100fb_var.xres = fbdev->panel->xres;
 479         au1100fb_var.xres_virtual = au1100fb_var.xres;
 480         au1100fb_var.yres = fbdev->panel->yres;
 481         au1100fb_var.yres_virtual = au1100fb_var.yres;
 482 
 483         fbdev->info.screen_base = fbdev->fb_mem;
 484         fbdev->info.fbops = &au1100fb_ops;
 485         fbdev->info.fix = au1100fb_fix;
 486 
 487         fbdev->info.pseudo_palette =
 488                 devm_kcalloc(&dev->dev, 16, sizeof(u32), GFP_KERNEL);
 489         if (!fbdev->info.pseudo_palette)
 490                 return -ENOMEM;
 491 
 492         if (fb_alloc_cmap(&fbdev->info.cmap, AU1100_LCD_NBR_PALETTE_ENTRIES, 0) < 0) {
 493                 print_err("Fail to allocate colormap (%d entries)",
 494                            AU1100_LCD_NBR_PALETTE_ENTRIES);
 495                 return -EFAULT;
 496         }
 497 
 498         fbdev->info.var = au1100fb_var;
 499 
 500         /* Set h/w registers */
 501         au1100fb_setmode(fbdev);
 502 
 503         /* Register new framebuffer */
 504         if (register_framebuffer(&fbdev->info) < 0) {
 505                 print_err("cannot register new framebuffer");
 506                 goto failed;
 507         }
 508 
 509         return 0;
 510 
 511 failed:
 512         if (fbdev->lcdclk) {
 513                 clk_disable_unprepare(fbdev->lcdclk);
 514                 clk_put(fbdev->lcdclk);
 515         }
 516         if (fbdev->info.cmap.len != 0) {
 517                 fb_dealloc_cmap(&fbdev->info.cmap);
 518         }
 519 
 520         return -ENODEV;
 521 }
 522 
 523 int au1100fb_drv_remove(struct platform_device *dev)
 524 {
 525         struct au1100fb_device *fbdev = NULL;
 526 
 527         if (!dev)
 528                 return -ENODEV;
 529 
 530         fbdev = platform_get_drvdata(dev);
 531 
 532 #if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO)
 533         au1100fb_fb_blank(VESA_POWERDOWN, &fbdev->info);
 534 #endif
 535         fbdev->regs->lcd_control &= ~LCD_CONTROL_GO;
 536 
 537         /* Clean up all probe data */
 538         unregister_framebuffer(&fbdev->info);
 539 
 540         fb_dealloc_cmap(&fbdev->info.cmap);
 541 
 542         if (fbdev->lcdclk) {
 543                 clk_disable_unprepare(fbdev->lcdclk);
 544                 clk_put(fbdev->lcdclk);
 545         }
 546 
 547         return 0;
 548 }
 549 
 550 #ifdef CONFIG_PM
 551 static struct au1100fb_regs fbregs;
 552 
 553 int au1100fb_drv_suspend(struct platform_device *dev, pm_message_t state)
 554 {
 555         struct au1100fb_device *fbdev = platform_get_drvdata(dev);
 556 
 557         if (!fbdev)
 558                 return 0;
 559 
 560         /* Blank the LCD */
 561         au1100fb_fb_blank(VESA_POWERDOWN, &fbdev->info);
 562 
 563         if (fbdev->lcdclk)
 564                 clk_disable(fbdev->lcdclk);
 565 
 566         memcpy(&fbregs, fbdev->regs, sizeof(struct au1100fb_regs));
 567 
 568         return 0;
 569 }
 570 
 571 int au1100fb_drv_resume(struct platform_device *dev)
 572 {
 573         struct au1100fb_device *fbdev = platform_get_drvdata(dev);
 574 
 575         if (!fbdev)
 576                 return 0;
 577 
 578         memcpy(fbdev->regs, &fbregs, sizeof(struct au1100fb_regs));
 579 
 580         if (fbdev->lcdclk)
 581                 clk_enable(fbdev->lcdclk);
 582 
 583         /* Unblank the LCD */
 584         au1100fb_fb_blank(VESA_NO_BLANKING, &fbdev->info);
 585 
 586         return 0;
 587 }
 588 #else
 589 #define au1100fb_drv_suspend NULL
 590 #define au1100fb_drv_resume NULL
 591 #endif
 592 
 593 static struct platform_driver au1100fb_driver = {
 594         .driver = {
 595                 .name           = "au1100-lcd",
 596         },
 597         .probe          = au1100fb_drv_probe,
 598         .remove         = au1100fb_drv_remove,
 599         .suspend        = au1100fb_drv_suspend,
 600         .resume         = au1100fb_drv_resume,
 601 };
 602 module_platform_driver(au1100fb_driver);
 603 
 604 MODULE_DESCRIPTION(DRIVER_DESC);
 605 MODULE_LICENSE("GPL");
/* [<][>][^][v][top][bottom][index][help] */
root/drivers/video/fbdev/au1100fb.c

DEFINITIONS
