root/drivers/video/fbdev/via/accel.h

INCLUDED FROM

   1 /* SPDX-License-Identifier: GPL-2.0-or-later */
   2 /*
   3  * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
   4  * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
   5 
   6  */
   7 
   8 #ifndef __ACCEL_H__
   9 #define __ACCEL_H__
  10 
  11 #define FB_ACCEL_VIA_UNICHROME  50
  12 
  13 /* MMIO Base Address Definition */
  14 #define MMIO_VGABASE                0x8000
  15 #define MMIO_CR_READ                (MMIO_VGABASE + 0x3D4)
  16 #define MMIO_CR_WRITE               (MMIO_VGABASE + 0x3D5)
  17 #define MMIO_SR_READ                (MMIO_VGABASE + 0x3C4)
  18 #define MMIO_SR_WRITE               (MMIO_VGABASE + 0x3C5)
  19 
  20 /* HW Cursor Status Define */
  21 #define HW_Cursor_ON    0
  22 #define HW_Cursor_OFF   1
  23 
  24 #define CURSOR_SIZE     (8 * 1024)
  25 #define VQ_SIZE         (256 * 1024)
  26 
  27 #define VIA_MMIO_BLTBASE        0x200000
  28 #define VIA_MMIO_BLTSIZE        0x200000
  29 
  30 /* Defines for 2D registers */
  31 #define VIA_REG_GECMD           0x000
  32 #define VIA_REG_GEMODE          0x004
  33 #define VIA_REG_SRCPOS          0x008
  34 #define VIA_REG_DSTPOS          0x00C
  35 /* width and height */
  36 #define VIA_REG_DIMENSION       0x010
  37 #define VIA_REG_PATADDR         0x014
  38 #define VIA_REG_FGCOLOR         0x018
  39 #define VIA_REG_BGCOLOR         0x01C
  40 /* top and left of clipping */
  41 #define VIA_REG_CLIPTL          0x020
  42 /* bottom and right of clipping */
  43 #define VIA_REG_CLIPBR          0x024
  44 #define VIA_REG_OFFSET          0x028
  45 /* color key control */
  46 #define VIA_REG_KEYCONTROL      0x02C
  47 #define VIA_REG_SRCBASE         0x030
  48 #define VIA_REG_DSTBASE         0x034
  49 /* pitch of src and dst */
  50 #define VIA_REG_PITCH           0x038
  51 #define VIA_REG_MONOPAT0        0x03C
  52 #define VIA_REG_MONOPAT1        0x040
  53 /* from 0x100 to 0x1ff */
  54 #define VIA_REG_COLORPAT        0x100
  55 
  56 /* defines for VIA 2D registers for vt3353/3409 (M1 engine)*/
  57 #define VIA_REG_GECMD_M1        0x000
  58 #define VIA_REG_GEMODE_M1       0x004
  59 #define VIA_REG_GESTATUS_M1     0x004       /* as same as VIA_REG_GEMODE */
  60 #define VIA_REG_PITCH_M1        0x008       /* pitch of src and dst */
  61 #define VIA_REG_DIMENSION_M1    0x00C       /* width and height */
  62 #define VIA_REG_DSTPOS_M1       0x010
  63 #define VIA_REG_LINE_XY_M1      0x010
  64 #define VIA_REG_DSTBASE_M1      0x014
  65 #define VIA_REG_SRCPOS_M1       0x018
  66 #define VIA_REG_LINE_K1K2_M1    0x018
  67 #define VIA_REG_SRCBASE_M1      0x01C
  68 #define VIA_REG_PATADDR_M1      0x020
  69 #define VIA_REG_MONOPAT0_M1     0x024
  70 #define VIA_REG_MONOPAT1_M1     0x028
  71 #define VIA_REG_OFFSET_M1       0x02C
  72 #define VIA_REG_LINE_ERROR_M1   0x02C
  73 #define VIA_REG_CLIPTL_M1       0x040       /* top and left of clipping */
  74 #define VIA_REG_CLIPBR_M1       0x044       /* bottom and right of clipping */
  75 #define VIA_REG_KEYCONTROL_M1   0x048       /* color key control */
  76 #define VIA_REG_FGCOLOR_M1      0x04C
  77 #define VIA_REG_DSTCOLORKEY_M1  0x04C       /* as same as VIA_REG_FG */
  78 #define VIA_REG_BGCOLOR_M1      0x050
  79 #define VIA_REG_SRCCOLORKEY_M1  0x050       /* as same as VIA_REG_BG */
  80 #define VIA_REG_MONOPATFGC_M1   0x058       /* Add BG color of Pattern. */
  81 #define VIA_REG_MONOPATBGC_M1   0x05C       /* Add FG color of Pattern. */
  82 #define VIA_REG_COLORPAT_M1     0x100       /* from 0x100 to 0x1ff */
  83 
  84 /* VIA_REG_PITCH(0x38): Pitch Setting */
  85 #define VIA_PITCH_ENABLE        0x80000000
  86 
  87 /* defines for VIA HW cursor registers */
  88 #define VIA_REG_CURSOR_MODE     0x2D0
  89 #define VIA_REG_CURSOR_POS      0x2D4
  90 #define VIA_REG_CURSOR_ORG      0x2D8
  91 #define VIA_REG_CURSOR_BG       0x2DC
  92 #define VIA_REG_CURSOR_FG       0x2E0
  93 
  94 /* VIA_REG_GEMODE(0x04): GE mode */
  95 #define VIA_GEM_8bpp            0x00000000
  96 #define VIA_GEM_16bpp           0x00000100
  97 #define VIA_GEM_32bpp           0x00000300
  98 
  99 /* VIA_REG_GECMD(0x00): 2D Engine Command  */
 100 #define VIA_GEC_NOOP            0x00000000
 101 #define VIA_GEC_BLT             0x00000001
 102 #define VIA_GEC_LINE            0x00000005
 103 
 104 /* Rotate Command */
 105 #define VIA_GEC_ROT             0x00000008
 106 
 107 #define VIA_GEC_SRC_XY          0x00000000
 108 #define VIA_GEC_SRC_LINEAR      0x00000010
 109 #define VIA_GEC_DST_XY          0x00000000
 110 #define VIA_GEC_DST_LINRAT      0x00000020
 111 
 112 #define VIA_GEC_SRC_FB          0x00000000
 113 #define VIA_GEC_SRC_SYS         0x00000040
 114 #define VIA_GEC_DST_FB          0x00000000
 115 #define VIA_GEC_DST_SYS         0x00000080
 116 
 117 /* source is mono */
 118 #define VIA_GEC_SRC_MONO        0x00000100
 119 /* pattern is mono */
 120 #define VIA_GEC_PAT_MONO        0x00000200
 121 /* mono src is opaque */
 122 #define VIA_GEC_MSRC_OPAQUE     0x00000000
 123 /* mono src is transparent */
 124 #define VIA_GEC_MSRC_TRANS      0x00000400
 125 /* pattern is in frame buffer */
 126 #define VIA_GEC_PAT_FB          0x00000000
 127 /* pattern is from reg setting */
 128 #define VIA_GEC_PAT_REG         0x00000800
 129 
 130 #define VIA_GEC_CLIP_DISABLE    0x00000000
 131 #define VIA_GEC_CLIP_ENABLE     0x00001000
 132 
 133 #define VIA_GEC_FIXCOLOR_PAT    0x00002000
 134 
 135 #define VIA_GEC_INCX            0x00000000
 136 #define VIA_GEC_DECY            0x00004000
 137 #define VIA_GEC_INCY            0x00000000
 138 #define VIA_GEC_DECX            0x00008000
 139 /* mono pattern is opaque */
 140 #define VIA_GEC_MPAT_OPAQUE     0x00000000
 141 /* mono pattern is transparent */
 142 #define VIA_GEC_MPAT_TRANS      0x00010000
 143 
 144 #define VIA_GEC_MONO_UNPACK     0x00000000
 145 #define VIA_GEC_MONO_PACK       0x00020000
 146 #define VIA_GEC_MONO_DWORD      0x00000000
 147 #define VIA_GEC_MONO_WORD       0x00040000
 148 #define VIA_GEC_MONO_BYTE       0x00080000
 149 
 150 #define VIA_GEC_LASTPIXEL_ON    0x00000000
 151 #define VIA_GEC_LASTPIXEL_OFF   0x00100000
 152 #define VIA_GEC_X_MAJOR         0x00000000
 153 #define VIA_GEC_Y_MAJOR         0x00200000
 154 #define VIA_GEC_QUICK_START     0x00800000
 155 
 156 /* defines for VIA 3D registers */
 157 #define VIA_REG_STATUS          0x400
 158 #define VIA_REG_CR_TRANSET      0x41C
 159 #define VIA_REG_CR_TRANSPACE    0x420
 160 #define VIA_REG_TRANSET         0x43C
 161 #define VIA_REG_TRANSPACE       0x440
 162 
 163 /* VIA_REG_STATUS(0x400): Engine Status */
 164 
 165 /* Command Regulator is busy */
 166 #define VIA_CMD_RGTR_BUSY       0x00000080
 167 /* 2D Engine is busy */
 168 #define VIA_2D_ENG_BUSY         0x00000002
 169 /* 3D Engine is busy */
 170 #define VIA_3D_ENG_BUSY         0x00000001
 171 /* Virtual Queue is busy */
 172 #define VIA_VR_QUEUE_BUSY       0x00020000
 173 
 174 /* VIA_REG_STATUS(0x400): Engine Status for H5 */
 175 #define VIA_CMD_RGTR_BUSY_H5   0x00000010  /* Command Regulator is busy */
 176 #define VIA_2D_ENG_BUSY_H5     0x00000002  /* 2D Engine is busy */
 177 #define VIA_3D_ENG_BUSY_H5     0x00001FE1  /* 3D Engine is busy */
 178 #define VIA_VR_QUEUE_BUSY_H5   0x00000004  /* Virtual Queue is busy */
 179 
 180 /* VIA_REG_STATUS(0x400): Engine Status for VT3353/3409 */
 181 #define VIA_CMD_RGTR_BUSY_M1   0x00000010  /* Command Regulator is busy */
 182 #define VIA_2D_ENG_BUSY_M1     0x00000002  /* 2D Engine is busy */
 183 #define VIA_3D_ENG_BUSY_M1     0x00001FE1  /* 3D Engine is busy */
 184 #define VIA_VR_QUEUE_BUSY_M1   0x00000004  /* Virtual Queue is busy */
 185 
 186 #define MAXLOOP                 0xFFFFFF
 187 
 188 #define VIA_BITBLT_COLOR        1
 189 #define VIA_BITBLT_MONO         2
 190 #define VIA_BITBLT_FILL         3
 191 
 192 int viafb_setup_engine(struct fb_info *info);
 193 void viafb_reset_engine(struct viafb_par *viapar);
 194 void viafb_show_hw_cursor(struct fb_info *info, int Status);
 195 void viafb_wait_engine_idle(struct fb_info *info);
 196 
 197 #endif /* __ACCEL_H__ */