root/drivers/message/fusion/lsi/mpi_cnfg.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2 /*
   3  *  Copyright (c) 2000-2008 LSI Corporation.
   4  *
   5  *
   6  *           Name:  mpi_cnfg.h
   7  *          Title:  MPI Config message, structures, and Pages
   8  *  Creation Date:  July 27, 2000
   9  *
  10  *    mpi_cnfg.h Version:  01.05.18
  11  *
  12  *  Version History
  13  *  ---------------
  14  *
  15  *  Date      Version   Description
  16  *  --------  --------  ------------------------------------------------------
  17  *  05-08-00  00.10.01  Original release for 0.10 spec dated 4/26/2000.
  18  *  06-06-00  01.00.01  Update version number for 1.0 release.
  19  *  06-08-00  01.00.02  Added _PAGEVERSION definitions for all pages.
  20  *                      Added FcPhLowestVersion, FcPhHighestVersion, Reserved2
  21  *                      fields to FC_DEVICE_0 page, updated the page version.
  22  *                      Changed _FREE_RUNNING_CLOCK to _PACING_TRANSFERS in
  23  *                      SCSI_PORT_0, SCSI_DEVICE_0 and SCSI_DEVICE_1 pages
  24  *                      and updated the page versions.
  25  *                      Added _RESPONSE_ID_MASK definition to SCSI_PORT_1
  26  *                      page and updated the page version.
  27  *                      Added Information field and _INFO_PARAMS_NEGOTIATED
  28  *                      definitionto SCSI_DEVICE_0 page.
  29  *  06-22-00  01.00.03  Removed batch controls from LAN_0 page and updated the
  30  *                      page version.
  31  *                      Added BucketsRemaining to LAN_1 page, redefined the
  32  *                      state values, and updated the page version.
  33  *                      Revised bus width definitions in SCSI_PORT_0,
  34  *                      SCSI_DEVICE_0 and SCSI_DEVICE_1 pages.
  35  *  06-30-00  01.00.04  Added MaxReplySize to LAN_1 page and updated the page
  36  *                      version.
  37  *                      Moved FC_DEVICE_0 PageAddress description to spec.
  38  *  07-27-00  01.00.05  Corrected the SubsystemVendorID and SubsystemID field
  39  *                      widths in IOC_0 page and updated the page version.
  40  *  11-02-00  01.01.01  Original release for post 1.0 work
  41  *                      Added Manufacturing pages, IO Unit Page 2, SCSI SPI
  42  *                      Port Page 2, FC Port Page 4, FC Port Page 5
  43  *  11-15-00  01.01.02  Interim changes to match proposals
  44  *  12-04-00  01.01.03  Config page changes to match MPI rev 1.00.01.
  45  *  12-05-00  01.01.04  Modified config page actions.
  46  *  01-09-01  01.01.05  Added defines for page address formats.
  47  *                      Data size for Manufacturing pages 2 and 3 no longer
  48  *                      defined here.
  49  *                      Io Unit Page 2 size is fixed at 4 adapters and some
  50  *                      flags were changed.
  51  *                      SCSI Port Page 2 Device Settings modified.
  52  *                      New fields added to FC Port Page 0 and some flags
  53  *                      cleaned up.
  54  *                      Removed impedance flash from FC Port Page 1.
  55  *                      Added FC Port pages 6 and 7.
  56  *  01-25-01  01.01.06  Added MaxInitiators field to FcPortPage0.
  57  *  01-29-01  01.01.07  Changed some defines to make them 32 character unique.
  58  *                      Added some LinkType defines for FcPortPage0.
  59  *  02-20-01  01.01.08  Started using MPI_POINTER.
  60  *  02-27-01  01.01.09  Replaced MPI_CONFIG_PAGETYPE_SCSI_LUN with
  61  *                      MPI_CONFIG_PAGETYPE_RAID_VOLUME.
  62  *                      Added definitions and structures for IOC Page 2 and
  63  *                      RAID Volume Page 2.
  64  *  03-27-01  01.01.10  Added CONFIG_PAGE_FC_PORT_8 and CONFIG_PAGE_FC_PORT_9.
  65  *                      CONFIG_PAGE_FC_PORT_3 now supports persistent by DID.
  66  *                      Added VendorId and ProductRevLevel fields to
  67  *                      RAIDVOL2_IM_PHYS_ID struct.
  68  *                      Modified values for MPI_FCPORTPAGE0_FLAGS_ATTACH_
  69  *                      defines to make them compatible to MPI version 1.0.
  70  *                      Added structure offset comments.
  71  *  04-09-01  01.01.11  Added some new defines for the PageAddress field and
  72  *                      removed some obsolete ones.
  73  *                      Added IO Unit Page 3.
  74  *                      Modified defines for Scsi Port Page 2.
  75  *                      Modified RAID Volume Pages.
  76  *  08-08-01  01.02.01  Original release for v1.2 work.
  77  *                      Added SepID and SepBus to RVP2 IMPhysicalDisk struct.
  78  *                      Added defines for the SEP bits in RVP2 VolumeSettings.
  79  *                      Modified the DeviceSettings field in RVP2 to use the
  80  *                      proper structure.
  81  *                      Added defines for SES, SAF-TE, and cross channel for
  82  *                      IOCPage2 CapabilitiesFlags.
  83  *                      Removed define for MPI_IOUNITPAGE2_FLAGS_RAID_DISABLE.
  84  *                      Removed define for
  85  *                      MPI_SCSIPORTPAGE2_PORT_FLAGS_PARITY_ENABLE.
  86  *                      Added define for MPI_CONFIG_PAGEATTR_RO_PERSISTENT.
  87  *  08-29-01 01.02.02   Fixed value for MPI_MANUFACTPAGE_DEVID_53C1035.
  88  *                      Added defines for MPI_FCPORTPAGE1_FLAGS_HARD_ALPA_ONLY
  89  *                      and MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY.
  90  *                      Removed MPI_SCSIPORTPAGE0_CAP_PACING_TRANSFERS,
  91  *                      MPI_SCSIDEVPAGE0_NP_PACING_TRANSFERS, and
  92  *                      MPI_SCSIDEVPAGE1_RP_PACING_TRANSFERS, and
  93  *                      MPI_SCSIDEVPAGE1_CONF_PPR_ALLOWED.
  94  *                      Added defines for MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED
  95  *                      and MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED.
  96  *                      Added OnBusTimerValue to CONFIG_PAGE_SCSI_PORT_1.
  97  *                      Added rejected bits to SCSI Device Page 0 Information.
  98  *                      Increased size of ALPA array in FC Port Page 2 by one
  99  *                      and removed a one byte reserved field.
 100  *  09-28-01 01.02.03   Swapped NegWireSpeedLow and NegWireSpeedLow in
 101  *                      CONFIG_PAGE_LAN_1 to match preferred 64-bit ordering.
 102  *                      Added structures for Manufacturing Page 4, IO Unit
 103  *                      Page 3, IOC Page 3, IOC Page 4, RAID Volume Page 0, and
 104  *                      RAID PhysDisk Page 0.
 105  *  10-04-01 01.02.04   Added define for MPI_CONFIG_PAGETYPE_RAID_PHYSDISK.
 106  *                      Modified some of the new defines to make them 32
 107  *                      character unique.
 108  *                      Modified how variable length pages (arrays) are defined.
 109  *                      Added generic defines for hot spare pools and RAID
 110  *                      volume types.
 111  *  11-01-01 01.02.05   Added define for MPI_IOUNITPAGE1_DISABLE_IR.
 112  *  03-14-02 01.02.06   Added PCISlotNum field to CONFIG_PAGE_IOC_1 along with
 113  *                      related define, and bumped the page version define.
 114  *  05-31-02 01.02.07   Added a Flags field to CONFIG_PAGE_IOC_2_RAID_VOL in a
 115  *                      reserved byte and added a define.
 116  *                      Added define for
 117  *                      MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE.
 118  *                      Added new config page: CONFIG_PAGE_IOC_5.
 119  *                      Added MaxAliases, MaxHardAliases, and NumCurrentAliases
 120  *                      fields to CONFIG_PAGE_FC_PORT_0.
 121  *                      Added AltConnector and NumRequestedAliases fields to
 122  *                      CONFIG_PAGE_FC_PORT_1.
 123  *                      Added new config page: CONFIG_PAGE_FC_PORT_10.
 124  *  07-12-02 01.02.08   Added more MPI_MANUFACTPAGE_DEVID_ defines.
 125  *                      Added additional MPI_SCSIDEVPAGE0_NP_ defines.
 126  *                      Added more MPI_SCSIDEVPAGE1_RP_ defines.
 127  *                      Added define for
 128  *                      MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE.
 129  *                      Added new config page: CONFIG_PAGE_SCSI_DEVICE_3.
 130  *                      Modified MPI_FCPORTPAGE5_FLAGS_ defines.
 131  *  09-16-02 01.02.09   Added MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG define.
 132  *  11-15-02 01.02.10   Added ConnectedID defines for CONFIG_PAGE_SCSI_PORT_0.
 133  *                      Added more Flags defines for CONFIG_PAGE_FC_PORT_1.
 134  *                      Added more Flags defines for CONFIG_PAGE_FC_DEVICE_0.
 135  *  04-01-03 01.02.11   Added RR_TOV field and additional Flags defines for
 136  *                      CONFIG_PAGE_FC_PORT_1.
 137  *                      Added define MPI_FCPORTPAGE5_FLAGS_DISABLE to disable
 138  *                      an alias.
 139  *                      Added more device id defines.
 140  *  06-26-03 01.02.12   Added MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID define.
 141  *                      Added TargetConfig and IDConfig fields to
 142  *                      CONFIG_PAGE_SCSI_PORT_1.
 143  *                      Added more PortFlags defines for CONFIG_PAGE_SCSI_PORT_2
 144  *                      to control DV.
 145  *                      Added more Flags defines for CONFIG_PAGE_FC_PORT_1.
 146  *                      In CONFIG_PAGE_FC_DEVICE_0, replaced Reserved1 field
 147  *                      with ADISCHardALPA.
 148  *                      Added MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY define.
 149  *  01-16-04 01.02.13   Added InitiatorDeviceTimeout and InitiatorIoPendTimeout
 150  *                      fields and related defines to CONFIG_PAGE_FC_PORT_1.
 151  *                      Added define for
 152  *                      MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK.
 153  *                      Added new fields to the substructures of
 154  *                      CONFIG_PAGE_FC_PORT_10.
 155  *  04-29-04 01.02.14   Added define for IDP bit for CONFIG_PAGE_SCSI_PORT_0,
 156  *                      CONFIG_PAGE_SCSI_DEVICE_0, and
 157  *                      CONFIG_PAGE_SCSI_DEVICE_1. Also bumped Page Version for
 158  *                      these pages.
 159  *  05-11-04 01.03.01   Added structure for CONFIG_PAGE_INBAND_0.
 160  *  08-19-04 01.05.01   Modified MSG_CONFIG request to support extended config
 161  *                      pages.
 162  *                      Added a new structure for extended config page header.
 163  *                      Added new extended config pages types and structures for
 164  *                      SAS IO Unit, SAS Expander, SAS Device, and SAS PHY.
 165  *                      Replaced a reserved byte in CONFIG_PAGE_MANUFACTURING_4
 166  *                      to add a Flags field.
 167  *                      Two new Manufacturing config pages (5 and 6).
 168  *                      Two new bits defined for IO Unit Page 1 Flags field.
 169  *                      Modified CONFIG_PAGE_IO_UNIT_2 to add three new fields
 170  *                      to specify the BIOS boot device.
 171  *                      Four new Flags bits defined for IO Unit Page 2.
 172  *                      Added IO Unit Page 4.
 173  *                      Added EEDP Flags settings to IOC Page 1.
 174  *                      Added new BIOS Page 1 config page.
 175  *  10-05-04 01.05.02   Added define for
 176  *                      MPI_IOCPAGE1_INITIATOR_CONTEXT_REPLY_DISABLE.
 177  *                      Added new Flags field to CONFIG_PAGE_MANUFACTURING_5 and
 178  *                      associated defines.
 179  *                      Added more defines for SAS IO Unit Page 0
 180  *                      DiscoveryStatus field.
 181  *                      Added define for MPI_SAS_IOUNIT0_DS_SUBTRACTIVE_LINK
 182  *                      and MPI_SAS_IOUNIT0_DS_TABLE_LINK.
 183  *                      Added defines for Physical Mapping Modes to SAS IO Unit
 184  *                      Page 2.
 185  *                      Added define for
 186  *                      MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH.
 187  *  10-27-04 01.05.03   Added defines for new SAS PHY page addressing mode.
 188  *                      Added defines for MaxTargetSpinUp to BIOS Page 1.
 189  *                      Added 5 new ControlFlags defines for SAS IO Unit
 190  *                      Page 1.
 191  *                      Added MaxNumPhysicalMappedIDs field to SAS IO Unit
 192  *                      Page 2.
 193  *                      Added AccessStatus field to SAS Device Page 0 and added
 194  *                      new Flags bits for supported SATA features.
 195  *  12-07-04  01.05.04  Added config page structures for BIOS Page 2, RAID
 196  *                      Volume Page 1, and RAID Physical Disk Page 1.
 197  *                      Replaced IO Unit Page 1 BootTargetID,BootBus, and
 198  *                      BootAdapterNum with reserved field.
 199  *                      Added DataScrubRate and ResyncRate to RAID Volume
 200  *                      Page 0.
 201  *                      Added MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT
 202  *                      define.
 203  *  12-09-04  01.05.05  Added Target Mode Large CDB Enable to FC Port Page 1
 204  *                      Flags field.
 205  *                      Added Auto Port Config flag define for SAS IOUNIT
 206  *                      Page 1 ControlFlags.
 207  *                      Added Disabled bad Phy define to Expander Page 1
 208  *                      Discovery Info field.
 209  *                      Added SAS/SATA device support to SAS IOUnit Page 1
 210  *                      ControlFlags.
 211  *                      Added Unsupported device to SAS Dev Page 0 Flags field
 212  *                      Added disable use SATA Hash Address for SAS IOUNIT
 213  *                      page 1 in ControlFields.
 214  *  01-15-05  01.05.06  Added defaults for data scrub rate and resync rate to
 215  *                      Manufacturing Page 4.
 216  *                      Added new defines for BIOS Page 1 IOCSettings field.
 217  *                      Added ExtDiskIdentifier field to RAID Physical Disk
 218  *                      Page 0.
 219  *                      Added new defines for SAS IO Unit Page 1 ControlFlags
 220  *                      and to SAS Device Page 0 Flags to control SATA devices.
 221  *                      Added defines and structures for the new Log Page 0, a
 222  *                      new type of configuration page.
 223  *  02-09-05  01.05.07  Added InactiveStatus field to RAID Volume Page 0.
 224  *                      Added WWID field to RAID Volume Page 1.
 225  *                      Added PhysicalPort field to SAS Expander pages 0 and 1.
 226  *  03-11-05  01.05.08  Removed the EEDP flags from IOC Page 1.
 227  *                      Added Enclosure/Slot boot device format to BIOS Page 2.
 228  *                      New status value for RAID Volume Page 0 VolumeStatus
 229  *                      (VolumeState subfield).
 230  *                      New value for RAID Physical Page 0 InactiveStatus.
 231  *                      Added Inactive Volume Member flag RAID Physical Disk
 232  *                      Page 0 PhysDiskStatus field.
 233  *                      New physical mapping mode in SAS IO Unit Page 2.
 234  *                      Added CONFIG_PAGE_SAS_ENCLOSURE_0.
 235  *                      Added Slot and Enclosure fields to SAS Device Page 0.
 236  *  06-24-05  01.05.09  Added EEDP defines to IOC Page 1.
 237  *                      Added more RAID type defines to IOC Page 2.
 238  *                      Added Port Enable Delay settings to BIOS Page 1.
 239  *                      Added Bad Block Table Full define to RAID Volume Page 0.
 240  *                      Added Previous State defines to RAID Physical Disk
 241  *                      Page 0.
 242  *                      Added Max Sata Targets define for DiscoveryStatus field
 243  *                      of SAS IO Unit Page 0.
 244  *                      Added Device Self Test to Control Flags of SAS IO Unit
 245  *                      Page 1.
 246  *                      Added Direct Attach Starting Slot Number define for SAS
 247  *                      IO Unit Page 2.
 248  *                      Added new fields in SAS Device Page 2 for enclosure
 249  *                      mapping.
 250  *                      Added OwnerDevHandle and Flags field to SAS PHY Page 0.
 251  *                      Added IOC GPIO Flags define to SAS Enclosure Page 0.
 252  *                      Fixed the value for MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT.
 253  *  08-03-05  01.05.10  Removed ISDataScrubRate and ISResyncRate from
 254  *                      Manufacturing Page 4.
 255  *                      Added MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE bit.
 256  *                      Added NumDevsPerEnclosure field to SAS IO Unit page 2.
 257  *                      Added MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP
 258  *                      define.
 259  *                      Added EnclosureHandle field to SAS Expander page 0.
 260  *                      Removed redundant NumTableEntriesProg field from SAS
 261  *                      Expander Page 1.
 262  *  08-30-05  01.05.11  Added DeviceID for FC949E and changed the DeviceID for
 263  *                      SAS1078.
 264  *                      Added more defines for Manufacturing Page 4 Flags field.
 265  *                      Added more defines for IOCSettings and added
 266  *                      ExpanderSpinup field to Bios Page 1.
 267  *                      Added postpone SATA Init bit to SAS IO Unit Page 1
 268  *                      ControlFlags.
 269  *                      Changed LogEntry format for Log Page 0.
 270  *  03-27-06  01.05.12  Added two new Flags defines for Manufacturing Page 4.
 271  *                      Added Manufacturing Page 7.
 272  *                      Added MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING.
 273  *                      Added IOC Page 6.
 274  *                      Added PrevBootDeviceForm field to CONFIG_PAGE_BIOS_2.
 275  *                      Added MaxLBAHigh field to RAID Volume Page 0.
 276  *                      Added Nvdata version fields to SAS IO Unit Page 0.
 277  *                      Added AdditionalControlFlags, MaxTargetPortConnectTime,
 278  *                      ReportDeviceMissingDelay, and IODeviceMissingDelay
 279  *                      fields to SAS IO Unit Page 1.
 280  *  10-11-06  01.05.13  Added NumForceWWID field and ForceWWID array to
 281  *                      Manufacturing Page 5.
 282  *                      Added Manufacturing pages 8 through 10.
 283  *                      Added defines for supported metadata size bits in
 284  *                      CapabilitiesFlags field of IOC Page 6.
 285  *                      Added defines for metadata size bits in VolumeSettings
 286  *                      field of RAID Volume Page 0.
 287  *                      Added SATA Link Reset settings, Enable SATA Asynchronous
 288  *                      Notification bit, and HideNonZeroAttachedPhyIdentifiers
 289  *                      bit to AdditionalControlFlags field of SAS IO Unit
 290  *                      Page 1.
 291  *                      Added defines for Enclosure Devices Unmapped and
 292  *                      Device Limit Exceeded bits in Status field of SAS IO
 293  *                      Unit Page 2.
 294  *                      Added more AccessStatus values for SAS Device Page 0.
 295  *                      Added bit for SATA Asynchronous Notification Support in
 296  *                      Flags field of SAS Device Page 0.
 297  *  02-28-07  01.05.14  Added ExtFlags field to Manufacturing Page 4.
 298  *                      Added Disable SMART Polling for CapabilitiesFlags of
 299  *                      IOC Page 6.
 300  *                      Added Disable SMART Polling to DeviceSettings of BIOS
 301  *                      Page 1.
 302  *                      Added Multi-Port Domain bit for DiscoveryStatus field
 303  *                      of SAS IO Unit Page.
 304  *                      Added Multi-Port Domain Illegal flag for SAS IO Unit
 305  *                      Page 1 AdditionalControlFlags field.
 306  *  05-24-07  01.05.15  Added Hide Physical Disks with Non-Integrated RAID
 307  *                      Metadata bit to Manufacturing Page 4 ExtFlags field.
 308  *                      Added Internal Connector to End Device Present bit to
 309  *                      Expander Page 0 Flags field.
 310  *                      Fixed define for
 311  *                      MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED.
 312  *  08-07-07  01.05.16  Added MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT
 313  *                      define.
 314  *                      Added BIOS Page 4 structure.
 315  *                      Added MPI_RAID_PHYS_DISK1_PATH_MAX define for RAID
 316  *                      Physcial Disk Page 1.
 317  *  01-15-07  01.05.17  Added additional bit defines for ExtFlags field of
 318  *                      Manufacturing Page 4.
 319  *                      Added Solid State Drives Supported bit to IOC Page 6
 320  *                      Capabilities Flags.
 321  *                      Added new value for AccessStatus field of SAS Device
 322  *                      Page 0 (_SATA_NEEDS_INITIALIZATION).
 323  *  03-28-08  01.05.18  Defined new bits in Manufacturing Page 4 ExtFlags field
 324  *                      to control coercion size and the mixing of SAS and SATA
 325  *                      SSD drives.
 326  *  --------------------------------------------------------------------------
 327  */
 328 
 329 #ifndef MPI_CNFG_H
 330 #define MPI_CNFG_H
 331 
 332 
 333 /*****************************************************************************
 334 *
 335 *       C o n f i g    M e s s a g e    a n d    S t r u c t u r e s
 336 *
 337 *****************************************************************************/
 338 
 339 typedef struct _CONFIG_PAGE_HEADER
 340 {
 341     U8                      PageVersion;                /* 00h */
 342     U8                      PageLength;                 /* 01h */
 343     U8                      PageNumber;                 /* 02h */
 344     U8                      PageType;                   /* 03h */
 345 } CONFIG_PAGE_HEADER, MPI_POINTER PTR_CONFIG_PAGE_HEADER,
 346   ConfigPageHeader_t, MPI_POINTER pConfigPageHeader_t;
 347 
 348 typedef union _CONFIG_PAGE_HEADER_UNION
 349 {
 350    ConfigPageHeader_t  Struct;
 351    U8                  Bytes[4];
 352    U16                 Word16[2];
 353    U32                 Word32;
 354 } ConfigPageHeaderUnion, MPI_POINTER pConfigPageHeaderUnion,
 355   CONFIG_PAGE_HEADER_UNION, MPI_POINTER PTR_CONFIG_PAGE_HEADER_UNION;
 356 
 357 typedef struct _CONFIG_EXTENDED_PAGE_HEADER
 358 {
 359     U8                  PageVersion;                /* 00h */
 360     U8                  Reserved1;                  /* 01h */
 361     U8                  PageNumber;                 /* 02h */
 362     U8                  PageType;                   /* 03h */
 363     U16                 ExtPageLength;              /* 04h */
 364     U8                  ExtPageType;                /* 06h */
 365     U8                  Reserved2;                  /* 07h */
 366 } CONFIG_EXTENDED_PAGE_HEADER, MPI_POINTER PTR_CONFIG_EXTENDED_PAGE_HEADER,
 367   ConfigExtendedPageHeader_t, MPI_POINTER pConfigExtendedPageHeader_t;
 368 
 369 
 370 
 371 /****************************************************************************
 372 *   PageType field values
 373 ****************************************************************************/
 374 #define MPI_CONFIG_PAGEATTR_READ_ONLY               (0x00)
 375 #define MPI_CONFIG_PAGEATTR_CHANGEABLE              (0x10)
 376 #define MPI_CONFIG_PAGEATTR_PERSISTENT              (0x20)
 377 #define MPI_CONFIG_PAGEATTR_RO_PERSISTENT           (0x30)
 378 #define MPI_CONFIG_PAGEATTR_MASK                    (0xF0)
 379 
 380 #define MPI_CONFIG_PAGETYPE_IO_UNIT                 (0x00)
 381 #define MPI_CONFIG_PAGETYPE_IOC                     (0x01)
 382 #define MPI_CONFIG_PAGETYPE_BIOS                    (0x02)
 383 #define MPI_CONFIG_PAGETYPE_SCSI_PORT               (0x03)
 384 #define MPI_CONFIG_PAGETYPE_SCSI_DEVICE             (0x04)
 385 #define MPI_CONFIG_PAGETYPE_FC_PORT                 (0x05)
 386 #define MPI_CONFIG_PAGETYPE_FC_DEVICE               (0x06)
 387 #define MPI_CONFIG_PAGETYPE_LAN                     (0x07)
 388 #define MPI_CONFIG_PAGETYPE_RAID_VOLUME             (0x08)
 389 #define MPI_CONFIG_PAGETYPE_MANUFACTURING           (0x09)
 390 #define MPI_CONFIG_PAGETYPE_RAID_PHYSDISK           (0x0A)
 391 #define MPI_CONFIG_PAGETYPE_INBAND                  (0x0B)
 392 #define MPI_CONFIG_PAGETYPE_EXTENDED                (0x0F)
 393 #define MPI_CONFIG_PAGETYPE_MASK                    (0x0F)
 394 
 395 #define MPI_CONFIG_TYPENUM_MASK                     (0x0FFF)
 396 
 397 
 398 /****************************************************************************
 399 *   ExtPageType field values
 400 ****************************************************************************/
 401 #define MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT          (0x10)
 402 #define MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER         (0x11)
 403 #define MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE           (0x12)
 404 #define MPI_CONFIG_EXTPAGETYPE_SAS_PHY              (0x13)
 405 #define MPI_CONFIG_EXTPAGETYPE_LOG                  (0x14)
 406 #define MPI_CONFIG_EXTPAGETYPE_ENCLOSURE            (0x15)
 407 
 408 
 409 /****************************************************************************
 410 *   PageAddress field values
 411 ****************************************************************************/
 412 #define MPI_SCSI_PORT_PGAD_PORT_MASK                (0x000000FF)
 413 
 414 #define MPI_SCSI_DEVICE_FORM_MASK                   (0xF0000000)
 415 #define MPI_SCSI_DEVICE_FORM_BUS_TID                (0x00000000)
 416 #define MPI_SCSI_DEVICE_TARGET_ID_MASK              (0x000000FF)
 417 #define MPI_SCSI_DEVICE_TARGET_ID_SHIFT             (0)
 418 #define MPI_SCSI_DEVICE_BUS_MASK                    (0x0000FF00)
 419 #define MPI_SCSI_DEVICE_BUS_SHIFT                   (8)
 420 #define MPI_SCSI_DEVICE_FORM_TARGET_MODE            (0x10000000)
 421 #define MPI_SCSI_DEVICE_TM_RESPOND_ID_MASK          (0x000000FF)
 422 #define MPI_SCSI_DEVICE_TM_RESPOND_ID_SHIFT         (0)
 423 #define MPI_SCSI_DEVICE_TM_BUS_MASK                 (0x0000FF00)
 424 #define MPI_SCSI_DEVICE_TM_BUS_SHIFT                (8)
 425 #define MPI_SCSI_DEVICE_TM_INIT_ID_MASK             (0x00FF0000)
 426 #define MPI_SCSI_DEVICE_TM_INIT_ID_SHIFT            (16)
 427 
 428 #define MPI_FC_PORT_PGAD_PORT_MASK                  (0xF0000000)
 429 #define MPI_FC_PORT_PGAD_PORT_SHIFT                 (28)
 430 #define MPI_FC_PORT_PGAD_FORM_MASK                  (0x0F000000)
 431 #define MPI_FC_PORT_PGAD_FORM_INDEX                 (0x01000000)
 432 #define MPI_FC_PORT_PGAD_INDEX_MASK                 (0x0000FFFF)
 433 #define MPI_FC_PORT_PGAD_INDEX_SHIFT                (0)
 434 
 435 #define MPI_FC_DEVICE_PGAD_PORT_MASK                (0xF0000000)
 436 #define MPI_FC_DEVICE_PGAD_PORT_SHIFT               (28)
 437 #define MPI_FC_DEVICE_PGAD_FORM_MASK                (0x0F000000)
 438 #define MPI_FC_DEVICE_PGAD_FORM_NEXT_DID            (0x00000000)
 439 #define MPI_FC_DEVICE_PGAD_ND_PORT_MASK             (0xF0000000)
 440 #define MPI_FC_DEVICE_PGAD_ND_PORT_SHIFT            (28)
 441 #define MPI_FC_DEVICE_PGAD_ND_DID_MASK              (0x00FFFFFF)
 442 #define MPI_FC_DEVICE_PGAD_ND_DID_SHIFT             (0)
 443 #define MPI_FC_DEVICE_PGAD_FORM_BUS_TID             (0x01000000)
 444 #define MPI_FC_DEVICE_PGAD_BT_BUS_MASK              (0x0000FF00)
 445 #define MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT             (8)
 446 #define MPI_FC_DEVICE_PGAD_BT_TID_MASK              (0x000000FF)
 447 #define MPI_FC_DEVICE_PGAD_BT_TID_SHIFT             (0)
 448 
 449 #define MPI_PHYSDISK_PGAD_PHYSDISKNUM_MASK          (0x000000FF)
 450 #define MPI_PHYSDISK_PGAD_PHYSDISKNUM_SHIFT         (0)
 451 
 452 #define MPI_SAS_EXPAND_PGAD_FORM_MASK             (0xF0000000)
 453 #define MPI_SAS_EXPAND_PGAD_FORM_SHIFT            (28)
 454 #define MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE  (0x00000000)
 455 #define MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM   (0x00000001)
 456 #define MPI_SAS_EXPAND_PGAD_FORM_HANDLE           (0x00000002)
 457 #define MPI_SAS_EXPAND_PGAD_GNH_MASK_HANDLE       (0x0000FFFF)
 458 #define MPI_SAS_EXPAND_PGAD_GNH_SHIFT_HANDLE      (0)
 459 #define MPI_SAS_EXPAND_PGAD_HPN_MASK_PHY          (0x00FF0000)
 460 #define MPI_SAS_EXPAND_PGAD_HPN_SHIFT_PHY         (16)
 461 #define MPI_SAS_EXPAND_PGAD_HPN_MASK_HANDLE       (0x0000FFFF)
 462 #define MPI_SAS_EXPAND_PGAD_HPN_SHIFT_HANDLE      (0)
 463 #define MPI_SAS_EXPAND_PGAD_H_MASK_HANDLE         (0x0000FFFF)
 464 #define MPI_SAS_EXPAND_PGAD_H_SHIFT_HANDLE        (0)
 465 
 466 #define MPI_SAS_DEVICE_PGAD_FORM_MASK               (0xF0000000)
 467 #define MPI_SAS_DEVICE_PGAD_FORM_SHIFT              (28)
 468 #define MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE    (0x00000000)
 469 #define MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID      (0x00000001)
 470 #define MPI_SAS_DEVICE_PGAD_FORM_HANDLE             (0x00000002)
 471 #define MPI_SAS_DEVICE_PGAD_GNH_HANDLE_MASK         (0x0000FFFF)
 472 #define MPI_SAS_DEVICE_PGAD_GNH_HANDLE_SHIFT        (0)
 473 #define MPI_SAS_DEVICE_PGAD_BT_BUS_MASK             (0x0000FF00)
 474 #define MPI_SAS_DEVICE_PGAD_BT_BUS_SHIFT            (8)
 475 #define MPI_SAS_DEVICE_PGAD_BT_TID_MASK             (0x000000FF)
 476 #define MPI_SAS_DEVICE_PGAD_BT_TID_SHIFT            (0)
 477 #define MPI_SAS_DEVICE_PGAD_H_HANDLE_MASK           (0x0000FFFF)
 478 #define MPI_SAS_DEVICE_PGAD_H_HANDLE_SHIFT          (0)
 479 
 480 #define MPI_SAS_PHY_PGAD_FORM_MASK                  (0xF0000000)
 481 #define MPI_SAS_PHY_PGAD_FORM_SHIFT                 (28)
 482 #define MPI_SAS_PHY_PGAD_FORM_PHY_NUMBER            (0x0)
 483 #define MPI_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX         (0x1)
 484 #define MPI_SAS_PHY_PGAD_PHY_NUMBER_MASK            (0x000000FF)
 485 #define MPI_SAS_PHY_PGAD_PHY_NUMBER_SHIFT           (0)
 486 #define MPI_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK         (0x0000FFFF)
 487 #define MPI_SAS_PHY_PGAD_PHY_TBL_INDEX_SHIFT        (0)
 488 
 489 #define MPI_SAS_ENCLOS_PGAD_FORM_MASK               (0xF0000000)
 490 #define MPI_SAS_ENCLOS_PGAD_FORM_SHIFT              (28)
 491 #define MPI_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE    (0x00000000)
 492 #define MPI_SAS_ENCLOS_PGAD_FORM_HANDLE             (0x00000001)
 493 #define MPI_SAS_ENCLOS_PGAD_GNH_HANDLE_MASK         (0x0000FFFF)
 494 #define MPI_SAS_ENCLOS_PGAD_GNH_HANDLE_SHIFT        (0)
 495 #define MPI_SAS_ENCLOS_PGAD_H_HANDLE_MASK           (0x0000FFFF)
 496 #define MPI_SAS_ENCLOS_PGAD_H_HANDLE_SHIFT          (0)
 497 
 498 
 499 
 500 /****************************************************************************
 501 *   Config Request Message
 502 ****************************************************************************/
 503 typedef struct _MSG_CONFIG
 504 {
 505     U8                      Action;                     /* 00h */
 506     U8                      Reserved;                   /* 01h */
 507     U8                      ChainOffset;                /* 02h */
 508     U8                      Function;                   /* 03h */
 509     U16                     ExtPageLength;              /* 04h */
 510     U8                      ExtPageType;                /* 06h */
 511     U8                      MsgFlags;                   /* 07h */
 512     U32                     MsgContext;                 /* 08h */
 513     U8                      Reserved2[8];               /* 0Ch */
 514     CONFIG_PAGE_HEADER      Header;                     /* 14h */
 515     U32                     PageAddress;                /* 18h */
 516     SGE_IO_UNION            PageBufferSGE;              /* 1Ch */
 517 } MSG_CONFIG, MPI_POINTER PTR_MSG_CONFIG,
 518   Config_t, MPI_POINTER pConfig_t;
 519 
 520 
 521 /****************************************************************************
 522 *   Action field values
 523 ****************************************************************************/
 524 #define MPI_CONFIG_ACTION_PAGE_HEADER               (0x00)
 525 #define MPI_CONFIG_ACTION_PAGE_READ_CURRENT         (0x01)
 526 #define MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT        (0x02)
 527 #define MPI_CONFIG_ACTION_PAGE_DEFAULT              (0x03)
 528 #define MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM          (0x04)
 529 #define MPI_CONFIG_ACTION_PAGE_READ_DEFAULT         (0x05)
 530 #define MPI_CONFIG_ACTION_PAGE_READ_NVRAM           (0x06)
 531 
 532 
 533 /* Config Reply Message */
 534 typedef struct _MSG_CONFIG_REPLY
 535 {
 536     U8                      Action;                     /* 00h */
 537     U8                      Reserved;                   /* 01h */
 538     U8                      MsgLength;                  /* 02h */
 539     U8                      Function;                   /* 03h */
 540     U16                     ExtPageLength;              /* 04h */
 541     U8                      ExtPageType;                /* 06h */
 542     U8                      MsgFlags;                   /* 07h */
 543     U32                     MsgContext;                 /* 08h */
 544     U8                      Reserved2[2];               /* 0Ch */
 545     U16                     IOCStatus;                  /* 0Eh */
 546     U32                     IOCLogInfo;                 /* 10h */
 547     CONFIG_PAGE_HEADER      Header;                     /* 14h */
 548 } MSG_CONFIG_REPLY, MPI_POINTER PTR_MSG_CONFIG_REPLY,
 549   ConfigReply_t, MPI_POINTER pConfigReply_t;
 550 
 551 
 552 
 553 /*****************************************************************************
 554 *
 555 *               C o n f i g u r a t i o n    P a g e s
 556 *
 557 *****************************************************************************/
 558 
 559 /****************************************************************************
 560 *   Manufacturing Config pages
 561 ****************************************************************************/
 562 #define MPI_MANUFACTPAGE_VENDORID_LSILOGIC          (0x1000)
 563 /* Fibre Channel */
 564 #define MPI_MANUFACTPAGE_DEVICEID_FC909             (0x0621)
 565 #define MPI_MANUFACTPAGE_DEVICEID_FC919             (0x0624)
 566 #define MPI_MANUFACTPAGE_DEVICEID_FC929             (0x0622)
 567 #define MPI_MANUFACTPAGE_DEVICEID_FC919X            (0x0628)
 568 #define MPI_MANUFACTPAGE_DEVICEID_FC929X            (0x0626)
 569 #define MPI_MANUFACTPAGE_DEVICEID_FC939X            (0x0642)
 570 #define MPI_MANUFACTPAGE_DEVICEID_FC949X            (0x0640)
 571 #define MPI_MANUFACTPAGE_DEVICEID_FC949E            (0x0646)
 572 /* SCSI */
 573 #define MPI_MANUFACTPAGE_DEVID_53C1030              (0x0030)
 574 #define MPI_MANUFACTPAGE_DEVID_53C1030ZC            (0x0031)
 575 #define MPI_MANUFACTPAGE_DEVID_1030_53C1035         (0x0032)
 576 #define MPI_MANUFACTPAGE_DEVID_1030ZC_53C1035       (0x0033)
 577 #define MPI_MANUFACTPAGE_DEVID_53C1035              (0x0040)
 578 #define MPI_MANUFACTPAGE_DEVID_53C1035ZC            (0x0041)
 579 /* SAS */
 580 #define MPI_MANUFACTPAGE_DEVID_SAS1064              (0x0050)
 581 #define MPI_MANUFACTPAGE_DEVID_SAS1064A             (0x005C)
 582 #define MPI_MANUFACTPAGE_DEVID_SAS1064E             (0x0056)
 583 #define MPI_MANUFACTPAGE_DEVID_SAS1066              (0x005E)
 584 #define MPI_MANUFACTPAGE_DEVID_SAS1066E             (0x005A)
 585 #define MPI_MANUFACTPAGE_DEVID_SAS1068              (0x0054)
 586 #define MPI_MANUFACTPAGE_DEVID_SAS1068E             (0x0058)
 587 #define MPI_MANUFACTPAGE_DEVID_SAS1068_820XELP      (0x0059)
 588 #define MPI_MANUFACTPAGE_DEVID_SAS1078              (0x0062)
 589 
 590 
 591 typedef struct _CONFIG_PAGE_MANUFACTURING_0
 592 {
 593     CONFIG_PAGE_HEADER      Header;                     /* 00h */
 594     U8                      ChipName[16];               /* 04h */
 595     U8                      ChipRevision[8];            /* 14h */
 596     U8                      BoardName[16];              /* 1Ch */
 597     U8                      BoardAssembly[16];          /* 2Ch */
 598     U8                      BoardTracerNumber[16];      /* 3Ch */
 599 
 600 } CONFIG_PAGE_MANUFACTURING_0, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_0,
 601   ManufacturingPage0_t, MPI_POINTER pManufacturingPage0_t;
 602 
 603 #define MPI_MANUFACTURING0_PAGEVERSION                 (0x00)
 604 
 605 
 606 typedef struct _CONFIG_PAGE_MANUFACTURING_1
 607 {
 608     CONFIG_PAGE_HEADER      Header;                     /* 00h */
 609     U8                      VPD[256];                   /* 04h */
 610 } CONFIG_PAGE_MANUFACTURING_1, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_1,
 611   ManufacturingPage1_t, MPI_POINTER pManufacturingPage1_t;
 612 
 613 #define MPI_MANUFACTURING1_PAGEVERSION                 (0x00)
 614 
 615 
 616 typedef struct _MPI_CHIP_REVISION_ID
 617 {
 618     U16 DeviceID;                                       /* 00h */
 619     U8  PCIRevisionID;                                  /* 02h */
 620     U8  Reserved;                                       /* 03h */
 621 } MPI_CHIP_REVISION_ID, MPI_POINTER PTR_MPI_CHIP_REVISION_ID,
 622   MpiChipRevisionId_t, MPI_POINTER pMpiChipRevisionId_t;
 623 
 624 
 625 /*
 626  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 627  * one and check Header.PageLength at runtime.
 628  */
 629 #ifndef MPI_MAN_PAGE_2_HW_SETTINGS_WORDS
 630 #define MPI_MAN_PAGE_2_HW_SETTINGS_WORDS    (1)
 631 #endif
 632 
 633 typedef struct _CONFIG_PAGE_MANUFACTURING_2
 634 {
 635     CONFIG_PAGE_HEADER      Header;                                 /* 00h */
 636     MPI_CHIP_REVISION_ID    ChipId;                                 /* 04h */
 637     U32                     HwSettings[MPI_MAN_PAGE_2_HW_SETTINGS_WORDS];/* 08h */
 638 } CONFIG_PAGE_MANUFACTURING_2, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_2,
 639   ManufacturingPage2_t, MPI_POINTER pManufacturingPage2_t;
 640 
 641 #define MPI_MANUFACTURING2_PAGEVERSION                  (0x00)
 642 
 643 
 644 /*
 645  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 646  * one and check Header.PageLength at runtime.
 647  */
 648 #ifndef MPI_MAN_PAGE_3_INFO_WORDS
 649 #define MPI_MAN_PAGE_3_INFO_WORDS           (1)
 650 #endif
 651 
 652 typedef struct _CONFIG_PAGE_MANUFACTURING_3
 653 {
 654     CONFIG_PAGE_HEADER                  Header;                     /* 00h */
 655     MPI_CHIP_REVISION_ID                ChipId;                     /* 04h */
 656     U32                                 Info[MPI_MAN_PAGE_3_INFO_WORDS];/* 08h */
 657 } CONFIG_PAGE_MANUFACTURING_3, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_3,
 658   ManufacturingPage3_t, MPI_POINTER pManufacturingPage3_t;
 659 
 660 #define MPI_MANUFACTURING3_PAGEVERSION                  (0x00)
 661 
 662 
 663 typedef struct _CONFIG_PAGE_MANUFACTURING_4
 664 {
 665     CONFIG_PAGE_HEADER              Header;             /* 00h */
 666     U32                             Reserved1;          /* 04h */
 667     U8                              InfoOffset0;        /* 08h */
 668     U8                              InfoSize0;          /* 09h */
 669     U8                              InfoOffset1;        /* 0Ah */
 670     U8                              InfoSize1;          /* 0Bh */
 671     U8                              InquirySize;        /* 0Ch */
 672     U8                              Flags;              /* 0Dh */
 673     U16                             ExtFlags;           /* 0Eh */
 674     U8                              InquiryData[56];    /* 10h */
 675     U32                             ISVolumeSettings;   /* 48h */
 676     U32                             IMEVolumeSettings;  /* 4Ch */
 677     U32                             IMVolumeSettings;   /* 50h */
 678     U32                             Reserved3;          /* 54h */
 679     U32                             Reserved4;          /* 58h */
 680     U32                             Reserved5;          /* 5Ch */
 681     U8                              IMEDataScrubRate;   /* 60h */
 682     U8                              IMEResyncRate;      /* 61h */
 683     U16                             Reserved6;          /* 62h */
 684     U8                              IMDataScrubRate;    /* 64h */
 685     U8                              IMResyncRate;       /* 65h */
 686     U16                             Reserved7;          /* 66h */
 687     U32                             Reserved8;          /* 68h */
 688     U32                             Reserved9;          /* 6Ch */
 689 } CONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4,
 690   ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t;
 691 
 692 #define MPI_MANUFACTURING4_PAGEVERSION                  (0x05)
 693 
 694 /* defines for the Flags field */
 695 #define MPI_MANPAGE4_FORCE_BAD_BLOCK_TABLE              (0x80)
 696 #define MPI_MANPAGE4_FORCE_OFFLINE_FAILOVER             (0x40)
 697 #define MPI_MANPAGE4_IME_DISABLE                        (0x20)
 698 #define MPI_MANPAGE4_IM_DISABLE                         (0x10)
 699 #define MPI_MANPAGE4_IS_DISABLE                         (0x08)
 700 #define MPI_MANPAGE4_IR_MODEPAGE8_DISABLE               (0x04)
 701 #define MPI_MANPAGE4_IM_RESYNC_CACHE_ENABLE             (0x02)
 702 #define MPI_MANPAGE4_IR_NO_MIX_SAS_SATA                 (0x01)
 703 
 704 /* defines for the ExtFlags field */
 705 #define MPI_MANPAGE4_EXTFLAGS_MASK_COERCION_SIZE        (0x0180)
 706 #define MPI_MANPAGE4_EXTFLAGS_SHIFT_COERCION_SIZE       (7)
 707 #define MPI_MANPAGE4_EXTFLAGS_1GB_COERCION_SIZE         (0)
 708 #define MPI_MANPAGE4_EXTFLAGS_128MB_COERCION_SIZE       (1)
 709 
 710 #define MPI_MANPAGE4_EXTFLAGS_NO_MIX_SSD_SAS_SATA       (0x0040)
 711 #define MPI_MANPAGE4_EXTFLAGS_MIX_SSD_AND_NON_SSD       (0x0020)
 712 #define MPI_MANPAGE4_EXTFLAGS_DUAL_PORT_SUPPORT         (0x0010)
 713 #define MPI_MANPAGE4_EXTFLAGS_HIDE_NON_IR_METADATA      (0x0008)
 714 #define MPI_MANPAGE4_EXTFLAGS_SAS_CACHE_DISABLE         (0x0004)
 715 #define MPI_MANPAGE4_EXTFLAGS_SATA_CACHE_DISABLE        (0x0002)
 716 #define MPI_MANPAGE4_EXTFLAGS_LEGACY_MODE               (0x0001)
 717 
 718 
 719 #ifndef MPI_MANPAGE5_NUM_FORCEWWID
 720 #define MPI_MANPAGE5_NUM_FORCEWWID      (1)
 721 #endif
 722 
 723 typedef struct _CONFIG_PAGE_MANUFACTURING_5
 724 {
 725     CONFIG_PAGE_HEADER              Header;             /* 00h */
 726     U64                             BaseWWID;           /* 04h */
 727     U8                              Flags;              /* 0Ch */
 728     U8                              NumForceWWID;       /* 0Dh */
 729     U16                             Reserved2;          /* 0Eh */
 730     U32                             Reserved3;          /* 10h */
 731     U32                             Reserved4;          /* 14h */
 732     U64                             ForceWWID[MPI_MANPAGE5_NUM_FORCEWWID]; /* 18h */
 733 } CONFIG_PAGE_MANUFACTURING_5, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_5,
 734   ManufacturingPage5_t, MPI_POINTER pManufacturingPage5_t;
 735 
 736 #define MPI_MANUFACTURING5_PAGEVERSION                  (0x02)
 737 
 738 /* defines for the Flags field */
 739 #define MPI_MANPAGE5_TWO_WWID_PER_PHY                   (0x01)
 740 
 741 
 742 typedef struct _CONFIG_PAGE_MANUFACTURING_6
 743 {
 744     CONFIG_PAGE_HEADER              Header;             /* 00h */
 745     U32                             ProductSpecificInfo;/* 04h */
 746 } CONFIG_PAGE_MANUFACTURING_6, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_6,
 747   ManufacturingPage6_t, MPI_POINTER pManufacturingPage6_t;
 748 
 749 #define MPI_MANUFACTURING6_PAGEVERSION                  (0x00)
 750 
 751 
 752 typedef struct _MPI_MANPAGE7_CONNECTOR_INFO
 753 {
 754     U32                         Pinout;                 /* 00h */
 755     U8                          Connector[16];          /* 04h */
 756     U8                          Location;               /* 14h */
 757     U8                          Reserved1;              /* 15h */
 758     U16                         Slot;                   /* 16h */
 759     U32                         Reserved2;              /* 18h */
 760 } MPI_MANPAGE7_CONNECTOR_INFO, MPI_POINTER PTR_MPI_MANPAGE7_CONNECTOR_INFO,
 761   MpiManPage7ConnectorInfo_t, MPI_POINTER pMpiManPage7ConnectorInfo_t;
 762 
 763 /* defines for the Pinout field */
 764 #define MPI_MANPAGE7_PINOUT_SFF_8484_L4                 (0x00080000)
 765 #define MPI_MANPAGE7_PINOUT_SFF_8484_L3                 (0x00040000)
 766 #define MPI_MANPAGE7_PINOUT_SFF_8484_L2                 (0x00020000)
 767 #define MPI_MANPAGE7_PINOUT_SFF_8484_L1                 (0x00010000)
 768 #define MPI_MANPAGE7_PINOUT_SFF_8470_L4                 (0x00000800)
 769 #define MPI_MANPAGE7_PINOUT_SFF_8470_L3                 (0x00000400)
 770 #define MPI_MANPAGE7_PINOUT_SFF_8470_L2                 (0x00000200)
 771 #define MPI_MANPAGE7_PINOUT_SFF_8470_L1                 (0x00000100)
 772 #define MPI_MANPAGE7_PINOUT_SFF_8482                    (0x00000002)
 773 #define MPI_MANPAGE7_PINOUT_CONNECTION_UNKNOWN          (0x00000001)
 774 
 775 /* defines for the Location field */
 776 #define MPI_MANPAGE7_LOCATION_UNKNOWN                   (0x01)
 777 #define MPI_MANPAGE7_LOCATION_INTERNAL                  (0x02)
 778 #define MPI_MANPAGE7_LOCATION_EXTERNAL                  (0x04)
 779 #define MPI_MANPAGE7_LOCATION_SWITCHABLE                (0x08)
 780 #define MPI_MANPAGE7_LOCATION_AUTO                      (0x10)
 781 #define MPI_MANPAGE7_LOCATION_NOT_PRESENT               (0x20)
 782 #define MPI_MANPAGE7_LOCATION_NOT_CONNECTED             (0x80)
 783 
 784 /*
 785  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 786  * one and check NumPhys at runtime.
 787  */
 788 #ifndef MPI_MANPAGE7_CONNECTOR_INFO_MAX
 789 #define MPI_MANPAGE7_CONNECTOR_INFO_MAX   (1)
 790 #endif
 791 
 792 typedef struct _CONFIG_PAGE_MANUFACTURING_7
 793 {
 794     CONFIG_PAGE_HEADER          Header;                 /* 00h */
 795     U32                         Reserved1;              /* 04h */
 796     U32                         Reserved2;              /* 08h */
 797     U32                         Flags;                  /* 0Ch */
 798     U8                          EnclosureName[16];      /* 10h */
 799     U8                          NumPhys;                /* 20h */
 800     U8                          Reserved3;              /* 21h */
 801     U16                         Reserved4;              /* 22h */
 802     MPI_MANPAGE7_CONNECTOR_INFO ConnectorInfo[MPI_MANPAGE7_CONNECTOR_INFO_MAX]; /* 24h */
 803 } CONFIG_PAGE_MANUFACTURING_7, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_7,
 804   ManufacturingPage7_t, MPI_POINTER pManufacturingPage7_t;
 805 
 806 #define MPI_MANUFACTURING7_PAGEVERSION                  (0x00)
 807 
 808 /* defines for the Flags field */
 809 #define MPI_MANPAGE7_FLAG_USE_SLOT_INFO                 (0x00000001)
 810 
 811 
 812 typedef struct _CONFIG_PAGE_MANUFACTURING_8
 813 {
 814     CONFIG_PAGE_HEADER              Header;             /* 00h */
 815     U32                             ProductSpecificInfo;/* 04h */
 816 } CONFIG_PAGE_MANUFACTURING_8, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_8,
 817   ManufacturingPage8_t, MPI_POINTER pManufacturingPage8_t;
 818 
 819 #define MPI_MANUFACTURING8_PAGEVERSION                  (0x00)
 820 
 821 
 822 typedef struct _CONFIG_PAGE_MANUFACTURING_9
 823 {
 824     CONFIG_PAGE_HEADER              Header;             /* 00h */
 825     U32                             ProductSpecificInfo;/* 04h */
 826 } CONFIG_PAGE_MANUFACTURING_9, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_9,
 827   ManufacturingPage9_t, MPI_POINTER pManufacturingPage9_t;
 828 
 829 #define MPI_MANUFACTURING9_PAGEVERSION                  (0x00)
 830 
 831 
 832 typedef struct _CONFIG_PAGE_MANUFACTURING_10
 833 {
 834     CONFIG_PAGE_HEADER              Header;             /* 00h */
 835     U32                             ProductSpecificInfo;/* 04h */
 836 } CONFIG_PAGE_MANUFACTURING_10, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_10,
 837   ManufacturingPage10_t, MPI_POINTER pManufacturingPage10_t;
 838 
 839 #define MPI_MANUFACTURING10_PAGEVERSION                 (0x00)
 840 
 841 
 842 /****************************************************************************
 843 *   IO Unit Config Pages
 844 ****************************************************************************/
 845 
 846 typedef struct _CONFIG_PAGE_IO_UNIT_0
 847 {
 848     CONFIG_PAGE_HEADER      Header;                     /* 00h */
 849     U64                     UniqueValue;                /* 04h */
 850 } CONFIG_PAGE_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_0,
 851   IOUnitPage0_t, MPI_POINTER pIOUnitPage0_t;
 852 
 853 #define MPI_IOUNITPAGE0_PAGEVERSION                     (0x00)
 854 
 855 
 856 typedef struct _CONFIG_PAGE_IO_UNIT_1
 857 {
 858     CONFIG_PAGE_HEADER      Header;                     /* 00h */
 859     U32                     Flags;                      /* 04h */
 860 } CONFIG_PAGE_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_1,
 861   IOUnitPage1_t, MPI_POINTER pIOUnitPage1_t;
 862 
 863 #define MPI_IOUNITPAGE1_PAGEVERSION                     (0x02)
 864 
 865 /* IO Unit Page 1 Flags defines */
 866 #define MPI_IOUNITPAGE1_MULTI_FUNCTION                  (0x00000000)
 867 #define MPI_IOUNITPAGE1_SINGLE_FUNCTION                 (0x00000001)
 868 #define MPI_IOUNITPAGE1_MULTI_PATHING                   (0x00000002)
 869 #define MPI_IOUNITPAGE1_SINGLE_PATHING                  (0x00000000)
 870 #define MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID         (0x00000004)
 871 #define MPI_IOUNITPAGE1_DISABLE_QUEUE_FULL_HANDLING     (0x00000020)
 872 #define MPI_IOUNITPAGE1_DISABLE_IR                      (0x00000040)
 873 #define MPI_IOUNITPAGE1_FORCE_32                        (0x00000080)
 874 #define MPI_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE        (0x00000100)
 875 #define MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE        (0x00000200)
 876 
 877 typedef struct _MPI_ADAPTER_INFO
 878 {
 879     U8      PciBusNumber;                               /* 00h */
 880     U8      PciDeviceAndFunctionNumber;                 /* 01h */
 881     U16     AdapterFlags;                               /* 02h */
 882 } MPI_ADAPTER_INFO, MPI_POINTER PTR_MPI_ADAPTER_INFO,
 883   MpiAdapterInfo_t, MPI_POINTER pMpiAdapterInfo_t;
 884 
 885 #define MPI_ADAPTER_INFO_FLAGS_EMBEDDED                 (0x0001)
 886 #define MPI_ADAPTER_INFO_FLAGS_INIT_STATUS              (0x0002)
 887 
 888 typedef struct _CONFIG_PAGE_IO_UNIT_2
 889 {
 890     CONFIG_PAGE_HEADER      Header;                     /* 00h */
 891     U32                     Flags;                      /* 04h */
 892     U32                     BiosVersion;                /* 08h */
 893     MPI_ADAPTER_INFO        AdapterOrder[4];            /* 0Ch */
 894     U32                     Reserved1;                  /* 1Ch */
 895 } CONFIG_PAGE_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_2,
 896   IOUnitPage2_t, MPI_POINTER pIOUnitPage2_t;
 897 
 898 #define MPI_IOUNITPAGE2_PAGEVERSION                     (0x02)
 899 
 900 #define MPI_IOUNITPAGE2_FLAGS_PAUSE_ON_ERROR            (0x00000002)
 901 #define MPI_IOUNITPAGE2_FLAGS_VERBOSE_ENABLE            (0x00000004)
 902 #define MPI_IOUNITPAGE2_FLAGS_COLOR_VIDEO_DISABLE       (0x00000008)
 903 #define MPI_IOUNITPAGE2_FLAGS_DONT_HOOK_INT_40          (0x00000010)
 904 
 905 #define MPI_IOUNITPAGE2_FLAGS_DEV_LIST_DISPLAY_MASK     (0x000000E0)
 906 #define MPI_IOUNITPAGE2_FLAGS_INSTALLED_DEV_DISPLAY     (0x00000000)
 907 #define MPI_IOUNITPAGE2_FLAGS_ADAPTER_DISPLAY           (0x00000020)
 908 #define MPI_IOUNITPAGE2_FLAGS_ADAPTER_DEV_DISPLAY       (0x00000040)
 909 
 910 
 911 /*
 912  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
 913  * one and check Header.PageLength at runtime.
 914  */
 915 #ifndef MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX
 916 #define MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX     (1)
 917 #endif
 918 
 919 typedef struct _CONFIG_PAGE_IO_UNIT_3
 920 {
 921     CONFIG_PAGE_HEADER      Header;                                   /* 00h */
 922     U8                      GPIOCount;                                /* 04h */
 923     U8                      Reserved1;                                /* 05h */
 924     U16                     Reserved2;                                /* 06h */
 925     U16                     GPIOVal[MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX]; /* 08h */
 926 } CONFIG_PAGE_IO_UNIT_3, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_3,
 927   IOUnitPage3_t, MPI_POINTER pIOUnitPage3_t;
 928 
 929 #define MPI_IOUNITPAGE3_PAGEVERSION                     (0x01)
 930 
 931 #define MPI_IOUNITPAGE3_GPIO_FUNCTION_MASK              (0xFC)
 932 #define MPI_IOUNITPAGE3_GPIO_FUNCTION_SHIFT             (2)
 933 #define MPI_IOUNITPAGE3_GPIO_SETTING_OFF                (0x00)
 934 #define MPI_IOUNITPAGE3_GPIO_SETTING_ON                 (0x01)
 935 
 936 
 937 typedef struct _CONFIG_PAGE_IO_UNIT_4
 938 {
 939     CONFIG_PAGE_HEADER      Header;                                   /* 00h */
 940     U32                     Reserved1;                                /* 04h */
 941     SGE_SIMPLE_UNION        FWImageSGE;                               /* 08h */
 942 } CONFIG_PAGE_IO_UNIT_4, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_4,
 943   IOUnitPage4_t, MPI_POINTER pIOUnitPage4_t;
 944 
 945 #define MPI_IOUNITPAGE4_PAGEVERSION                     (0x00)
 946 
 947 
 948 /****************************************************************************
 949 *   IOC Config Pages
 950 ****************************************************************************/
 951 
 952 typedef struct _CONFIG_PAGE_IOC_0
 953 {
 954     CONFIG_PAGE_HEADER      Header;                     /* 00h */
 955     U32                     TotalNVStore;               /* 04h */
 956     U32                     FreeNVStore;                /* 08h */
 957     U16                     VendorID;                   /* 0Ch */
 958     U16                     DeviceID;                   /* 0Eh */
 959     U8                      RevisionID;                 /* 10h */
 960     U8                      Reserved[3];                /* 11h */
 961     U32                     ClassCode;                  /* 14h */
 962     U16                     SubsystemVendorID;          /* 18h */
 963     U16                     SubsystemID;                /* 1Ah */
 964 } CONFIG_PAGE_IOC_0, MPI_POINTER PTR_CONFIG_PAGE_IOC_0,
 965   IOCPage0_t, MPI_POINTER pIOCPage0_t;
 966 
 967 #define MPI_IOCPAGE0_PAGEVERSION                        (0x01)
 968 
 969 
 970 typedef struct _CONFIG_PAGE_IOC_1
 971 {
 972     CONFIG_PAGE_HEADER      Header;                     /* 00h */
 973     U32                     Flags;                      /* 04h */
 974     U32                     CoalescingTimeout;          /* 08h */
 975     U8                      CoalescingDepth;            /* 0Ch */
 976     U8                      PCISlotNum;                 /* 0Dh */
 977     U8                      Reserved[2];                /* 0Eh */
 978 } CONFIG_PAGE_IOC_1, MPI_POINTER PTR_CONFIG_PAGE_IOC_1,
 979   IOCPage1_t, MPI_POINTER pIOCPage1_t;
 980 
 981 #define MPI_IOCPAGE1_PAGEVERSION                        (0x03)
 982 
 983 /* defines for the Flags field */
 984 #define MPI_IOCPAGE1_EEDP_MODE_MASK                     (0x07000000)
 985 #define MPI_IOCPAGE1_EEDP_MODE_OFF                      (0x00000000)
 986 #define MPI_IOCPAGE1_EEDP_MODE_T10                      (0x01000000)
 987 #define MPI_IOCPAGE1_EEDP_MODE_LSI_1                    (0x02000000)
 988 #define MPI_IOCPAGE1_INITIATOR_CONTEXT_REPLY_DISABLE    (0x00000010)
 989 #define MPI_IOCPAGE1_REPLY_COALESCING                   (0x00000001)
 990 
 991 #define MPI_IOCPAGE1_PCISLOTNUM_UNKNOWN                 (0xFF)
 992 
 993 
 994 typedef struct _CONFIG_PAGE_IOC_2_RAID_VOL
 995 {
 996     U8                          VolumeID;               /* 00h */
 997     U8                          VolumeBus;              /* 01h */
 998     U8                          VolumeIOC;              /* 02h */
 999     U8                          VolumePageNumber;       /* 03h */
1000     U8                          VolumeType;             /* 04h */
1001     U8                          Flags;                  /* 05h */
1002     U16                         Reserved3;              /* 06h */
1003 } CONFIG_PAGE_IOC_2_RAID_VOL, MPI_POINTER PTR_CONFIG_PAGE_IOC_2_RAID_VOL,
1004   ConfigPageIoc2RaidVol_t, MPI_POINTER pConfigPageIoc2RaidVol_t;
1005 
1006 /* IOC Page 2 Volume RAID Type values, also used in RAID Volume pages */
1007 
1008 #define MPI_RAID_VOL_TYPE_IS                        (0x00)
1009 #define MPI_RAID_VOL_TYPE_IME                       (0x01)
1010 #define MPI_RAID_VOL_TYPE_IM                        (0x02)
1011 #define MPI_RAID_VOL_TYPE_RAID_5                    (0x03)
1012 #define MPI_RAID_VOL_TYPE_RAID_6                    (0x04)
1013 #define MPI_RAID_VOL_TYPE_RAID_10                   (0x05)
1014 #define MPI_RAID_VOL_TYPE_RAID_50                   (0x06)
1015 #define MPI_RAID_VOL_TYPE_UNKNOWN                   (0xFF)
1016 
1017 /* IOC Page 2 Volume Flags values */
1018 
1019 #define MPI_IOCPAGE2_FLAG_VOLUME_INACTIVE           (0x08)
1020 
1021 /*
1022  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1023  * one and check Header.PageLength at runtime.
1024  */
1025 #ifndef MPI_IOC_PAGE_2_RAID_VOLUME_MAX
1026 #define MPI_IOC_PAGE_2_RAID_VOLUME_MAX      (1)
1027 #endif
1028 
1029 typedef struct _CONFIG_PAGE_IOC_2
1030 {
1031     CONFIG_PAGE_HEADER          Header;                              /* 00h */
1032     U32                         CapabilitiesFlags;                   /* 04h */
1033     U8                          NumActiveVolumes;                    /* 08h */
1034     U8                          MaxVolumes;                          /* 09h */
1035     U8                          NumActivePhysDisks;                  /* 0Ah */
1036     U8                          MaxPhysDisks;                        /* 0Bh */
1037     CONFIG_PAGE_IOC_2_RAID_VOL  RaidVolume[MPI_IOC_PAGE_2_RAID_VOLUME_MAX];/* 0Ch */
1038 } CONFIG_PAGE_IOC_2, MPI_POINTER PTR_CONFIG_PAGE_IOC_2,
1039   IOCPage2_t, MPI_POINTER pIOCPage2_t;
1040 
1041 #define MPI_IOCPAGE2_PAGEVERSION                        (0x04)
1042 
1043 /* IOC Page 2 Capabilities flags */
1044 
1045 #define MPI_IOCPAGE2_CAP_FLAGS_IS_SUPPORT               (0x00000001)
1046 #define MPI_IOCPAGE2_CAP_FLAGS_IME_SUPPORT              (0x00000002)
1047 #define MPI_IOCPAGE2_CAP_FLAGS_IM_SUPPORT               (0x00000004)
1048 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_5_SUPPORT           (0x00000008)
1049 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_6_SUPPORT           (0x00000010)
1050 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_10_SUPPORT          (0x00000020)
1051 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_50_SUPPORT          (0x00000040)
1052 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING   (0x10000000)
1053 #define MPI_IOCPAGE2_CAP_FLAGS_SES_SUPPORT              (0x20000000)
1054 #define MPI_IOCPAGE2_CAP_FLAGS_SAFTE_SUPPORT            (0x40000000)
1055 #define MPI_IOCPAGE2_CAP_FLAGS_CROSS_CHANNEL_SUPPORT    (0x80000000)
1056 
1057 
1058 typedef struct _IOC_3_PHYS_DISK
1059 {
1060     U8                          PhysDiskID;             /* 00h */
1061     U8                          PhysDiskBus;            /* 01h */
1062     U8                          PhysDiskIOC;            /* 02h */
1063     U8                          PhysDiskNum;            /* 03h */
1064 } IOC_3_PHYS_DISK, MPI_POINTER PTR_IOC_3_PHYS_DISK,
1065   Ioc3PhysDisk_t, MPI_POINTER pIoc3PhysDisk_t;
1066 
1067 /*
1068  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1069  * one and check Header.PageLength at runtime.
1070  */
1071 #ifndef MPI_IOC_PAGE_3_PHYSDISK_MAX
1072 #define MPI_IOC_PAGE_3_PHYSDISK_MAX         (1)
1073 #endif
1074 
1075 typedef struct _CONFIG_PAGE_IOC_3
1076 {
1077     CONFIG_PAGE_HEADER          Header;                                /* 00h */
1078     U8                          NumPhysDisks;                          /* 04h */
1079     U8                          Reserved1;                             /* 05h */
1080     U16                         Reserved2;                             /* 06h */
1081     IOC_3_PHYS_DISK             PhysDisk[MPI_IOC_PAGE_3_PHYSDISK_MAX]; /* 08h */
1082 } CONFIG_PAGE_IOC_3, MPI_POINTER PTR_CONFIG_PAGE_IOC_3,
1083   IOCPage3_t, MPI_POINTER pIOCPage3_t;
1084 
1085 #define MPI_IOCPAGE3_PAGEVERSION                        (0x00)
1086 
1087 
1088 typedef struct _IOC_4_SEP
1089 {
1090     U8                          SEPTargetID;            /* 00h */
1091     U8                          SEPBus;                 /* 01h */
1092     U16                         Reserved;               /* 02h */
1093 } IOC_4_SEP, MPI_POINTER PTR_IOC_4_SEP,
1094   Ioc4Sep_t, MPI_POINTER pIoc4Sep_t;
1095 
1096 /*
1097  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1098  * one and check Header.PageLength at runtime.
1099  */
1100 #ifndef MPI_IOC_PAGE_4_SEP_MAX
1101 #define MPI_IOC_PAGE_4_SEP_MAX              (1)
1102 #endif
1103 
1104 typedef struct _CONFIG_PAGE_IOC_4
1105 {
1106     CONFIG_PAGE_HEADER          Header;                         /* 00h */
1107     U8                          ActiveSEP;                      /* 04h */
1108     U8                          MaxSEP;                         /* 05h */
1109     U16                         Reserved1;                      /* 06h */
1110     IOC_4_SEP                   SEP[MPI_IOC_PAGE_4_SEP_MAX];    /* 08h */
1111 } CONFIG_PAGE_IOC_4, MPI_POINTER PTR_CONFIG_PAGE_IOC_4,
1112   IOCPage4_t, MPI_POINTER pIOCPage4_t;
1113 
1114 #define MPI_IOCPAGE4_PAGEVERSION                        (0x00)
1115 
1116 
1117 typedef struct _IOC_5_HOT_SPARE
1118 {
1119     U8                          PhysDiskNum;            /* 00h */
1120     U8                          Reserved;               /* 01h */
1121     U8                          HotSparePool;           /* 02h */
1122     U8                          Flags;                   /* 03h */
1123 } IOC_5_HOT_SPARE, MPI_POINTER PTR_IOC_5_HOT_SPARE,
1124   Ioc5HotSpare_t, MPI_POINTER pIoc5HotSpare_t;
1125 
1126 /* IOC Page 5 HotSpare Flags */
1127 #define MPI_IOC_PAGE_5_HOT_SPARE_ACTIVE                 (0x01)
1128 
1129 /*
1130  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1131  * one and check Header.PageLength at runtime.
1132  */
1133 #ifndef MPI_IOC_PAGE_5_HOT_SPARE_MAX
1134 #define MPI_IOC_PAGE_5_HOT_SPARE_MAX        (1)
1135 #endif
1136 
1137 typedef struct _CONFIG_PAGE_IOC_5
1138 {
1139     CONFIG_PAGE_HEADER          Header;                         /* 00h */
1140     U32                         Reserved1;                      /* 04h */
1141     U8                          NumHotSpares;                   /* 08h */
1142     U8                          Reserved2;                      /* 09h */
1143     U16                         Reserved3;                      /* 0Ah */
1144     IOC_5_HOT_SPARE             HotSpare[MPI_IOC_PAGE_5_HOT_SPARE_MAX]; /* 0Ch */
1145 } CONFIG_PAGE_IOC_5, MPI_POINTER PTR_CONFIG_PAGE_IOC_5,
1146   IOCPage5_t, MPI_POINTER pIOCPage5_t;
1147 
1148 #define MPI_IOCPAGE5_PAGEVERSION                        (0x00)
1149 
1150 typedef struct _CONFIG_PAGE_IOC_6
1151 {
1152     CONFIG_PAGE_HEADER          Header;                         /* 00h */
1153     U32                         CapabilitiesFlags;              /* 04h */
1154     U8                          MaxDrivesIS;                    /* 08h */
1155     U8                          MaxDrivesIM;                    /* 09h */
1156     U8                          MaxDrivesIME;                   /* 0Ah */
1157     U8                          Reserved1;                      /* 0Bh */
1158     U8                          MinDrivesIS;                    /* 0Ch */
1159     U8                          MinDrivesIM;                    /* 0Dh */
1160     U8                          MinDrivesIME;                   /* 0Eh */
1161     U8                          Reserved2;                      /* 0Fh */
1162     U8                          MaxGlobalHotSpares;             /* 10h */
1163     U8                          Reserved3;                      /* 11h */
1164     U16                         Reserved4;                      /* 12h */
1165     U32                         Reserved5;                      /* 14h */
1166     U32                         SupportedStripeSizeMapIS;       /* 18h */
1167     U32                         SupportedStripeSizeMapIME;      /* 1Ch */
1168     U32                         Reserved6;                      /* 20h */
1169     U8                          MetadataSize;                   /* 24h */
1170     U8                          Reserved7;                      /* 25h */
1171     U16                         Reserved8;                      /* 26h */
1172     U16                         MaxBadBlockTableEntries;        /* 28h */
1173     U16                         Reserved9;                      /* 2Ah */
1174     U16                         IRNvsramUsage;                  /* 2Ch */
1175     U16                         Reserved10;                     /* 2Eh */
1176     U32                         IRNvsramVersion;                /* 30h */
1177     U32                         Reserved11;                     /* 34h */
1178     U32                         Reserved12;                     /* 38h */
1179 } CONFIG_PAGE_IOC_6, MPI_POINTER PTR_CONFIG_PAGE_IOC_6,
1180   IOCPage6_t, MPI_POINTER pIOCPage6_t;
1181 
1182 #define MPI_IOCPAGE6_PAGEVERSION                        (0x01)
1183 
1184 /* IOC Page 6 Capabilities Flags */
1185 
1186 #define MPI_IOCPAGE6_CAP_FLAGS_SSD_SUPPORT              (0x00000020)
1187 #define MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT  (0x00000010)
1188 #define MPI_IOCPAGE6_CAP_FLAGS_DISABLE_SMART_POLLING    (0x00000008)
1189 
1190 #define MPI_IOCPAGE6_CAP_FLAGS_MASK_METADATA_SIZE       (0x00000006)
1191 #define MPI_IOCPAGE6_CAP_FLAGS_64MB_METADATA_SIZE       (0x00000000)
1192 #define MPI_IOCPAGE6_CAP_FLAGS_512MB_METADATA_SIZE      (0x00000002)
1193 
1194 #define MPI_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE         (0x00000001)
1195 
1196 
1197 /****************************************************************************
1198 *   BIOS Config Pages
1199 ****************************************************************************/
1200 
1201 typedef struct _CONFIG_PAGE_BIOS_1
1202 {
1203     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1204     U32                     BiosOptions;                /* 04h */
1205     U32                     IOCSettings;                /* 08h */
1206     U32                     Reserved1;                  /* 0Ch */
1207     U32                     DeviceSettings;             /* 10h */
1208     U16                     NumberOfDevices;            /* 14h */
1209     U8                      ExpanderSpinup;             /* 16h */
1210     U8                      Reserved2;                  /* 17h */
1211     U16                     IOTimeoutBlockDevicesNonRM; /* 18h */
1212     U16                     IOTimeoutSequential;        /* 1Ah */
1213     U16                     IOTimeoutOther;             /* 1Ch */
1214     U16                     IOTimeoutBlockDevicesRM;    /* 1Eh */
1215 } CONFIG_PAGE_BIOS_1, MPI_POINTER PTR_CONFIG_PAGE_BIOS_1,
1216   BIOSPage1_t, MPI_POINTER pBIOSPage1_t;
1217 
1218 #define MPI_BIOSPAGE1_PAGEVERSION                       (0x03)
1219 
1220 /* values for the BiosOptions field */
1221 #define MPI_BIOSPAGE1_OPTIONS_SPI_ENABLE                (0x00000400)
1222 #define MPI_BIOSPAGE1_OPTIONS_FC_ENABLE                 (0x00000200)
1223 #define MPI_BIOSPAGE1_OPTIONS_SAS_ENABLE                (0x00000100)
1224 #define MPI_BIOSPAGE1_OPTIONS_DISABLE_BIOS              (0x00000001)
1225 
1226 /* values for the IOCSettings field */
1227 #define MPI_BIOSPAGE1_IOCSET_MASK_INITIAL_SPINUP_DELAY  (0x0F000000)
1228 #define MPI_BIOSPAGE1_IOCSET_SHIFT_INITIAL_SPINUP_DELAY (24)
1229 
1230 #define MPI_BIOSPAGE1_IOCSET_MASK_PORT_ENABLE_DELAY     (0x00F00000)
1231 #define MPI_BIOSPAGE1_IOCSET_SHIFT_PORT_ENABLE_DELAY    (20)
1232 
1233 #define MPI_BIOSPAGE1_IOCSET_AUTO_PORT_ENABLE           (0x00080000)
1234 #define MPI_BIOSPAGE1_IOCSET_DIRECT_ATTACH_SPINUP_MODE  (0x00040000)
1235 
1236 #define MPI_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE       (0x00030000)
1237 #define MPI_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT        (0x00000000)
1238 #define MPI_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT           (0x00010000)
1239 
1240 #define MPI_BIOSPAGE1_IOCSET_MASK_MAX_TARGET_SPIN_UP    (0x0000F000)
1241 #define MPI_BIOSPAGE1_IOCSET_SHIFT_MAX_TARGET_SPIN_UP   (12)
1242 
1243 #define MPI_BIOSPAGE1_IOCSET_MASK_SPINUP_DELAY          (0x00000F00)
1244 #define MPI_BIOSPAGE1_IOCSET_SHIFT_SPINUP_DELAY         (8)
1245 
1246 #define MPI_BIOSPAGE1_IOCSET_MASK_RM_SETTING            (0x000000C0)
1247 #define MPI_BIOSPAGE1_IOCSET_NONE_RM_SETTING            (0x00000000)
1248 #define MPI_BIOSPAGE1_IOCSET_BOOT_RM_SETTING            (0x00000040)
1249 #define MPI_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING           (0x00000080)
1250 
1251 #define MPI_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT       (0x00000030)
1252 #define MPI_BIOSPAGE1_IOCSET_NO_SUPPORT                 (0x00000000)
1253 #define MPI_BIOSPAGE1_IOCSET_BIOS_SUPPORT               (0x00000010)
1254 #define MPI_BIOSPAGE1_IOCSET_OS_SUPPORT                 (0x00000020)
1255 #define MPI_BIOSPAGE1_IOCSET_ALL_SUPPORT                (0x00000030)
1256 
1257 #define MPI_BIOSPAGE1_IOCSET_ALTERNATE_CHS              (0x00000008)
1258 
1259 /* values for the DeviceSettings field */
1260 #define MPI_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING      (0x00000010)
1261 #define MPI_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN            (0x00000008)
1262 #define MPI_BIOSPAGE1_DEVSET_DISABLE_RM_LUN             (0x00000004)
1263 #define MPI_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN         (0x00000002)
1264 #define MPI_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN          (0x00000001)
1265 
1266 /* defines for the ExpanderSpinup field */
1267 #define MPI_BIOSPAGE1_EXPSPINUP_MASK_MAX_TARGET         (0xF0)
1268 #define MPI_BIOSPAGE1_EXPSPINUP_SHIFT_MAX_TARGET        (4)
1269 #define MPI_BIOSPAGE1_EXPSPINUP_MASK_DELAY              (0x0F)
1270 
1271 typedef struct _MPI_BOOT_DEVICE_ADAPTER_ORDER
1272 {
1273     U32         Reserved1;                              /* 00h */
1274     U32         Reserved2;                              /* 04h */
1275     U32         Reserved3;                              /* 08h */
1276     U32         Reserved4;                              /* 0Ch */
1277     U32         Reserved5;                              /* 10h */
1278     U32         Reserved6;                              /* 14h */
1279     U32         Reserved7;                              /* 18h */
1280     U32         Reserved8;                              /* 1Ch */
1281     U32         Reserved9;                              /* 20h */
1282     U32         Reserved10;                             /* 24h */
1283     U32         Reserved11;                             /* 28h */
1284     U32         Reserved12;                             /* 2Ch */
1285     U32         Reserved13;                             /* 30h */
1286     U32         Reserved14;                             /* 34h */
1287     U32         Reserved15;                             /* 38h */
1288     U32         Reserved16;                             /* 3Ch */
1289     U32         Reserved17;                             /* 40h */
1290 } MPI_BOOT_DEVICE_ADAPTER_ORDER, MPI_POINTER PTR_MPI_BOOT_DEVICE_ADAPTER_ORDER;
1291 
1292 typedef struct _MPI_BOOT_DEVICE_ADAPTER_NUMBER
1293 {
1294     U8          TargetID;                               /* 00h */
1295     U8          Bus;                                    /* 01h */
1296     U8          AdapterNumber;                          /* 02h */
1297     U8          Reserved1;                              /* 03h */
1298     U32         Reserved2;                              /* 04h */
1299     U32         Reserved3;                              /* 08h */
1300     U32         Reserved4;                              /* 0Ch */
1301     U8          LUN[8];                                 /* 10h */
1302     U32         Reserved5;                              /* 18h */
1303     U32         Reserved6;                              /* 1Ch */
1304     U32         Reserved7;                              /* 20h */
1305     U32         Reserved8;                              /* 24h */
1306     U32         Reserved9;                              /* 28h */
1307     U32         Reserved10;                             /* 2Ch */
1308     U32         Reserved11;                             /* 30h */
1309     U32         Reserved12;                             /* 34h */
1310     U32         Reserved13;                             /* 38h */
1311     U32         Reserved14;                             /* 3Ch */
1312     U32         Reserved15;                             /* 40h */
1313 } MPI_BOOT_DEVICE_ADAPTER_NUMBER, MPI_POINTER PTR_MPI_BOOT_DEVICE_ADAPTER_NUMBER;
1314 
1315 typedef struct _MPI_BOOT_DEVICE_PCI_ADDRESS
1316 {
1317     U8          TargetID;                               /* 00h */
1318     U8          Bus;                                    /* 01h */
1319     U16         PCIAddress;                             /* 02h */
1320     U32         Reserved1;                              /* 04h */
1321     U32         Reserved2;                              /* 08h */
1322     U32         Reserved3;                              /* 0Ch */
1323     U8          LUN[8];                                 /* 10h */
1324     U32         Reserved4;                              /* 18h */
1325     U32         Reserved5;                              /* 1Ch */
1326     U32         Reserved6;                              /* 20h */
1327     U32         Reserved7;                              /* 24h */
1328     U32         Reserved8;                              /* 28h */
1329     U32         Reserved9;                              /* 2Ch */
1330     U32         Reserved10;                             /* 30h */
1331     U32         Reserved11;                             /* 34h */
1332     U32         Reserved12;                             /* 38h */
1333     U32         Reserved13;                             /* 3Ch */
1334     U32         Reserved14;                             /* 40h */
1335 } MPI_BOOT_DEVICE_PCI_ADDRESS, MPI_POINTER PTR_MPI_BOOT_DEVICE_PCI_ADDRESS;
1336 
1337 typedef struct _MPI_BOOT_DEVICE_SLOT_NUMBER
1338 {
1339     U8          TargetID;                               /* 00h */
1340     U8          Bus;                                    /* 01h */
1341     U8          PCISlotNumber;                          /* 02h */
1342     U8          Reserved1;                              /* 03h */
1343     U32         Reserved2;                              /* 04h */
1344     U32         Reserved3;                              /* 08h */
1345     U32         Reserved4;                              /* 0Ch */
1346     U8          LUN[8];                                 /* 10h */
1347     U32         Reserved5;                              /* 18h */
1348     U32         Reserved6;                              /* 1Ch */
1349     U32         Reserved7;                              /* 20h */
1350     U32         Reserved8;                              /* 24h */
1351     U32         Reserved9;                              /* 28h */
1352     U32         Reserved10;                             /* 2Ch */
1353     U32         Reserved11;                             /* 30h */
1354     U32         Reserved12;                             /* 34h */
1355     U32         Reserved13;                             /* 38h */
1356     U32         Reserved14;                             /* 3Ch */
1357     U32         Reserved15;                             /* 40h */
1358 } MPI_BOOT_DEVICE_PCI_SLOT_NUMBER, MPI_POINTER PTR_MPI_BOOT_DEVICE_PCI_SLOT_NUMBER;
1359 
1360 typedef struct _MPI_BOOT_DEVICE_FC_WWN
1361 {
1362     U64         WWPN;                                   /* 00h */
1363     U32         Reserved1;                              /* 08h */
1364     U32         Reserved2;                              /* 0Ch */
1365     U8          LUN[8];                                 /* 10h */
1366     U32         Reserved3;                              /* 18h */
1367     U32         Reserved4;                              /* 1Ch */
1368     U32         Reserved5;                              /* 20h */
1369     U32         Reserved6;                              /* 24h */
1370     U32         Reserved7;                              /* 28h */
1371     U32         Reserved8;                              /* 2Ch */
1372     U32         Reserved9;                              /* 30h */
1373     U32         Reserved10;                             /* 34h */
1374     U32         Reserved11;                             /* 38h */
1375     U32         Reserved12;                             /* 3Ch */
1376     U32         Reserved13;                             /* 40h */
1377 } MPI_BOOT_DEVICE_FC_WWN, MPI_POINTER PTR_MPI_BOOT_DEVICE_FC_WWN;
1378 
1379 typedef struct _MPI_BOOT_DEVICE_SAS_WWN
1380 {
1381     U64         SASAddress;                             /* 00h */
1382     U32         Reserved1;                              /* 08h */
1383     U32         Reserved2;                              /* 0Ch */
1384     U8          LUN[8];                                 /* 10h */
1385     U32         Reserved3;                              /* 18h */
1386     U32         Reserved4;                              /* 1Ch */
1387     U32         Reserved5;                              /* 20h */
1388     U32         Reserved6;                              /* 24h */
1389     U32         Reserved7;                              /* 28h */
1390     U32         Reserved8;                              /* 2Ch */
1391     U32         Reserved9;                              /* 30h */
1392     U32         Reserved10;                             /* 34h */
1393     U32         Reserved11;                             /* 38h */
1394     U32         Reserved12;                             /* 3Ch */
1395     U32         Reserved13;                             /* 40h */
1396 } MPI_BOOT_DEVICE_SAS_WWN, MPI_POINTER PTR_MPI_BOOT_DEVICE_SAS_WWN;
1397 
1398 typedef struct _MPI_BOOT_DEVICE_ENCLOSURE_SLOT
1399 {
1400     U64         EnclosureLogicalID;                     /* 00h */
1401     U32         Reserved1;                              /* 08h */
1402     U32         Reserved2;                              /* 0Ch */
1403     U8          LUN[8];                                 /* 10h */
1404     U16         SlotNumber;                             /* 18h */
1405     U16         Reserved3;                              /* 1Ah */
1406     U32         Reserved4;                              /* 1Ch */
1407     U32         Reserved5;                              /* 20h */
1408     U32         Reserved6;                              /* 24h */
1409     U32         Reserved7;                              /* 28h */
1410     U32         Reserved8;                              /* 2Ch */
1411     U32         Reserved9;                              /* 30h */
1412     U32         Reserved10;                             /* 34h */
1413     U32         Reserved11;                             /* 38h */
1414     U32         Reserved12;                             /* 3Ch */
1415     U32         Reserved13;                             /* 40h */
1416 } MPI_BOOT_DEVICE_ENCLOSURE_SLOT,
1417   MPI_POINTER PTR_MPI_BOOT_DEVICE_ENCLOSURE_SLOT;
1418 
1419 typedef union _MPI_BIOSPAGE2_BOOT_DEVICE
1420 {
1421     MPI_BOOT_DEVICE_ADAPTER_ORDER   AdapterOrder;
1422     MPI_BOOT_DEVICE_ADAPTER_NUMBER  AdapterNumber;
1423     MPI_BOOT_DEVICE_PCI_ADDRESS     PCIAddress;
1424     MPI_BOOT_DEVICE_PCI_SLOT_NUMBER PCISlotNumber;
1425     MPI_BOOT_DEVICE_FC_WWN          FcWwn;
1426     MPI_BOOT_DEVICE_SAS_WWN         SasWwn;
1427     MPI_BOOT_DEVICE_ENCLOSURE_SLOT  EnclosureSlot;
1428 } MPI_BIOSPAGE2_BOOT_DEVICE, MPI_POINTER PTR_MPI_BIOSPAGE2_BOOT_DEVICE;
1429 
1430 typedef struct _CONFIG_PAGE_BIOS_2
1431 {
1432     CONFIG_PAGE_HEADER          Header;                 /* 00h */
1433     U32                         Reserved1;              /* 04h */
1434     U32                         Reserved2;              /* 08h */
1435     U32                         Reserved3;              /* 0Ch */
1436     U32                         Reserved4;              /* 10h */
1437     U32                         Reserved5;              /* 14h */
1438     U32                         Reserved6;              /* 18h */
1439     U8                          BootDeviceForm;         /* 1Ch */
1440     U8                          PrevBootDeviceForm;     /* 1Ch */
1441     U16                         Reserved8;              /* 1Eh */
1442     MPI_BIOSPAGE2_BOOT_DEVICE   BootDevice;             /* 20h */
1443 } CONFIG_PAGE_BIOS_2, MPI_POINTER PTR_CONFIG_PAGE_BIOS_2,
1444   BIOSPage2_t, MPI_POINTER pBIOSPage2_t;
1445 
1446 #define MPI_BIOSPAGE2_PAGEVERSION                       (0x02)
1447 
1448 #define MPI_BIOSPAGE2_FORM_MASK                         (0x0F)
1449 #define MPI_BIOSPAGE2_FORM_ADAPTER_ORDER                (0x00)
1450 #define MPI_BIOSPAGE2_FORM_ADAPTER_NUMBER               (0x01)
1451 #define MPI_BIOSPAGE2_FORM_PCI_ADDRESS                  (0x02)
1452 #define MPI_BIOSPAGE2_FORM_PCI_SLOT_NUMBER              (0x03)
1453 #define MPI_BIOSPAGE2_FORM_FC_WWN                       (0x04)
1454 #define MPI_BIOSPAGE2_FORM_SAS_WWN                      (0x05)
1455 #define MPI_BIOSPAGE2_FORM_ENCLOSURE_SLOT               (0x06)
1456 
1457 typedef struct _CONFIG_PAGE_BIOS_4
1458 {
1459     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1460     U64                     ReassignmentBaseWWID;       /* 04h */
1461 } CONFIG_PAGE_BIOS_4, MPI_POINTER PTR_CONFIG_PAGE_BIOS_4,
1462   BIOSPage4_t, MPI_POINTER pBIOSPage4_t;
1463 
1464 #define MPI_BIOSPAGE4_PAGEVERSION                       (0x00)
1465 
1466 
1467 /****************************************************************************
1468 *   SCSI Port Config Pages
1469 ****************************************************************************/
1470 
1471 typedef struct _CONFIG_PAGE_SCSI_PORT_0
1472 {
1473     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1474     U32                     Capabilities;               /* 04h */
1475     U32                     PhysicalInterface;          /* 08h */
1476 } CONFIG_PAGE_SCSI_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_0,
1477   SCSIPortPage0_t, MPI_POINTER pSCSIPortPage0_t;
1478 
1479 #define MPI_SCSIPORTPAGE0_PAGEVERSION                   (0x02)
1480 
1481 #define MPI_SCSIPORTPAGE0_CAP_IU                        (0x00000001)
1482 #define MPI_SCSIPORTPAGE0_CAP_DT                        (0x00000002)
1483 #define MPI_SCSIPORTPAGE0_CAP_QAS                       (0x00000004)
1484 #define MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK      (0x0000FF00)
1485 #define MPI_SCSIPORTPAGE0_SYNC_ASYNC                    (0x00)
1486 #define MPI_SCSIPORTPAGE0_SYNC_5                        (0x32)
1487 #define MPI_SCSIPORTPAGE0_SYNC_10                       (0x19)
1488 #define MPI_SCSIPORTPAGE0_SYNC_20                       (0x0C)
1489 #define MPI_SCSIPORTPAGE0_SYNC_33_33                    (0x0B)
1490 #define MPI_SCSIPORTPAGE0_SYNC_40                       (0x0A)
1491 #define MPI_SCSIPORTPAGE0_SYNC_80                       (0x09)
1492 #define MPI_SCSIPORTPAGE0_SYNC_160                      (0x08)
1493 #define MPI_SCSIPORTPAGE0_SYNC_UNKNOWN                  (0xFF)
1494 
1495 #define MPI_SCSIPORTPAGE0_CAP_SHIFT_MIN_SYNC_PERIOD     (8)
1496 #define MPI_SCSIPORTPAGE0_CAP_GET_MIN_SYNC_PERIOD(Cap)      \
1497     (  ((Cap) & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK) \
1498     >> MPI_SCSIPORTPAGE0_CAP_SHIFT_MIN_SYNC_PERIOD          \
1499     )
1500 #define MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK      (0x00FF0000)
1501 #define MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET     (16)
1502 #define MPI_SCSIPORTPAGE0_CAP_GET_MAX_SYNC_OFFSET(Cap)      \
1503     (  ((Cap) & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK) \
1504     >> MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET          \
1505     )
1506 #define MPI_SCSIPORTPAGE0_CAP_IDP                       (0x08000000)
1507 #define MPI_SCSIPORTPAGE0_CAP_WIDE                      (0x20000000)
1508 #define MPI_SCSIPORTPAGE0_CAP_AIP                       (0x80000000)
1509 
1510 #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK          (0x00000003)
1511 #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD                (0x01)
1512 #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE                 (0x02)
1513 #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_LVD                (0x03)
1514 #define MPI_SCSIPORTPAGE0_PHY_MASK_CONNECTED_ID         (0xFF000000)
1515 #define MPI_SCSIPORTPAGE0_PHY_SHIFT_CONNECTED_ID        (24)
1516 #define MPI_SCSIPORTPAGE0_PHY_BUS_FREE_CONNECTED_ID     (0xFE)
1517 #define MPI_SCSIPORTPAGE0_PHY_UNKNOWN_CONNECTED_ID      (0xFF)
1518 
1519 
1520 typedef struct _CONFIG_PAGE_SCSI_PORT_1
1521 {
1522     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1523     U32                     Configuration;              /* 04h */
1524     U32                     OnBusTimerValue;            /* 08h */
1525     U8                      TargetConfig;               /* 0Ch */
1526     U8                      Reserved1;                  /* 0Dh */
1527     U16                     IDConfig;                   /* 0Eh */
1528 } CONFIG_PAGE_SCSI_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_1,
1529   SCSIPortPage1_t, MPI_POINTER pSCSIPortPage1_t;
1530 
1531 #define MPI_SCSIPORTPAGE1_PAGEVERSION                   (0x03)
1532 
1533 /* Configuration values */
1534 #define MPI_SCSIPORTPAGE1_CFG_PORT_SCSI_ID_MASK         (0x000000FF)
1535 #define MPI_SCSIPORTPAGE1_CFG_PORT_RESPONSE_ID_MASK     (0xFFFF0000)
1536 #define MPI_SCSIPORTPAGE1_CFG_SHIFT_PORT_RESPONSE_ID    (16)
1537 
1538 /* TargetConfig values */
1539 #define MPI_SCSIPORTPAGE1_TARGCONFIG_TARG_ONLY        (0x01)
1540 #define MPI_SCSIPORTPAGE1_TARGCONFIG_INIT_TARG        (0x02)
1541 
1542 
1543 typedef struct _MPI_DEVICE_INFO
1544 {
1545     U8      Timeout;                                    /* 00h */
1546     U8      SyncFactor;                                 /* 01h */
1547     U16     DeviceFlags;                                /* 02h */
1548 } MPI_DEVICE_INFO, MPI_POINTER PTR_MPI_DEVICE_INFO,
1549   MpiDeviceInfo_t, MPI_POINTER pMpiDeviceInfo_t;
1550 
1551 typedef struct _CONFIG_PAGE_SCSI_PORT_2
1552 {
1553     CONFIG_PAGE_HEADER  Header;                         /* 00h */
1554     U32                 PortFlags;                      /* 04h */
1555     U32                 PortSettings;                   /* 08h */
1556     MPI_DEVICE_INFO     DeviceSettings[16];             /* 0Ch */
1557 } CONFIG_PAGE_SCSI_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_2,
1558   SCSIPortPage2_t, MPI_POINTER pSCSIPortPage2_t;
1559 
1560 #define MPI_SCSIPORTPAGE2_PAGEVERSION                       (0x02)
1561 
1562 /* PortFlags values */
1563 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_SCAN_HIGH_TO_LOW       (0x00000001)
1564 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET       (0x00000004)
1565 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_ALTERNATE_CHS          (0x00000008)
1566 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_TERMINATION_DISABLE    (0x00000010)
1567 
1568 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK                (0x00000060)
1569 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_FULL_DV                (0x00000000)
1570 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_BASIC_DV_ONLY          (0x00000020)
1571 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_OFF_DV                 (0x00000060)
1572 
1573 
1574 /* PortSettings values */
1575 #define MPI_SCSIPORTPAGE2_PORT_HOST_ID_MASK                 (0x0000000F)
1576 #define MPI_SCSIPORTPAGE2_PORT_MASK_INIT_HBA                (0x00000030)
1577 #define MPI_SCSIPORTPAGE2_PORT_DISABLE_INIT_HBA             (0x00000000)
1578 #define MPI_SCSIPORTPAGE2_PORT_BIOS_INIT_HBA                (0x00000010)
1579 #define MPI_SCSIPORTPAGE2_PORT_OS_INIT_HBA                  (0x00000020)
1580 #define MPI_SCSIPORTPAGE2_PORT_BIOS_OS_INIT_HBA             (0x00000030)
1581 #define MPI_SCSIPORTPAGE2_PORT_REMOVABLE_MEDIA              (0x000000C0)
1582 #define MPI_SCSIPORTPAGE2_PORT_RM_NONE                      (0x00000000)
1583 #define MPI_SCSIPORTPAGE2_PORT_RM_BOOT_ONLY                 (0x00000040)
1584 #define MPI_SCSIPORTPAGE2_PORT_RM_WITH_MEDIA                (0x00000080)
1585 #define MPI_SCSIPORTPAGE2_PORT_SPINUP_DELAY_MASK            (0x00000F00)
1586 #define MPI_SCSIPORTPAGE2_PORT_SHIFT_SPINUP_DELAY           (8)
1587 #define MPI_SCSIPORTPAGE2_PORT_MASK_NEGO_MASTER_SETTINGS    (0x00003000)
1588 #define MPI_SCSIPORTPAGE2_PORT_NEGO_MASTER_SETTINGS         (0x00000000)
1589 #define MPI_SCSIPORTPAGE2_PORT_NONE_MASTER_SETTINGS         (0x00001000)
1590 #define MPI_SCSIPORTPAGE2_PORT_ALL_MASTER_SETTINGS          (0x00003000)
1591 
1592 #define MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE          (0x0001)
1593 #define MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE             (0x0002)
1594 #define MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE            (0x0004)
1595 #define MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE           (0x0008)
1596 #define MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE               (0x0010)
1597 #define MPI_SCSIPORTPAGE2_DEVICE_BOOT_CHOICE                (0x0020)
1598 
1599 
1600 /****************************************************************************
1601 *   SCSI Target Device Config Pages
1602 ****************************************************************************/
1603 
1604 typedef struct _CONFIG_PAGE_SCSI_DEVICE_0
1605 {
1606     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1607     U32                     NegotiatedParameters;       /* 04h */
1608     U32                     Information;                /* 08h */
1609 } CONFIG_PAGE_SCSI_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_0,
1610   SCSIDevicePage0_t, MPI_POINTER pSCSIDevicePage0_t;
1611 
1612 #define MPI_SCSIDEVPAGE0_PAGEVERSION                    (0x04)
1613 
1614 #define MPI_SCSIDEVPAGE0_NP_IU                          (0x00000001)
1615 #define MPI_SCSIDEVPAGE0_NP_DT                          (0x00000002)
1616 #define MPI_SCSIDEVPAGE0_NP_QAS                         (0x00000004)
1617 #define MPI_SCSIDEVPAGE0_NP_HOLD_MCS                    (0x00000008)
1618 #define MPI_SCSIDEVPAGE0_NP_WR_FLOW                     (0x00000010)
1619 #define MPI_SCSIDEVPAGE0_NP_RD_STRM                     (0x00000020)
1620 #define MPI_SCSIDEVPAGE0_NP_RTI                         (0x00000040)
1621 #define MPI_SCSIDEVPAGE0_NP_PCOMP_EN                    (0x00000080)
1622 #define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK        (0x0000FF00)
1623 #define MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_PERIOD           (8)
1624 #define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK        (0x00FF0000)
1625 #define MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_OFFSET           (16)
1626 #define MPI_SCSIDEVPAGE0_NP_IDP                         (0x08000000)
1627 #define MPI_SCSIDEVPAGE0_NP_WIDE                        (0x20000000)
1628 #define MPI_SCSIDEVPAGE0_NP_AIP                         (0x80000000)
1629 
1630 #define MPI_SCSIDEVPAGE0_INFO_PARAMS_NEGOTIATED         (0x00000001)
1631 #define MPI_SCSIDEVPAGE0_INFO_SDTR_REJECTED             (0x00000002)
1632 #define MPI_SCSIDEVPAGE0_INFO_WDTR_REJECTED             (0x00000004)
1633 #define MPI_SCSIDEVPAGE0_INFO_PPR_REJECTED              (0x00000008)
1634 
1635 
1636 typedef struct _CONFIG_PAGE_SCSI_DEVICE_1
1637 {
1638     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1639     U32                     RequestedParameters;        /* 04h */
1640     U32                     Reserved;                   /* 08h */
1641     U32                     Configuration;              /* 0Ch */
1642 } CONFIG_PAGE_SCSI_DEVICE_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_1,
1643   SCSIDevicePage1_t, MPI_POINTER pSCSIDevicePage1_t;
1644 
1645 #define MPI_SCSIDEVPAGE1_PAGEVERSION                    (0x05)
1646 
1647 #define MPI_SCSIDEVPAGE1_RP_IU                          (0x00000001)
1648 #define MPI_SCSIDEVPAGE1_RP_DT                          (0x00000002)
1649 #define MPI_SCSIDEVPAGE1_RP_QAS                         (0x00000004)
1650 #define MPI_SCSIDEVPAGE1_RP_HOLD_MCS                    (0x00000008)
1651 #define MPI_SCSIDEVPAGE1_RP_WR_FLOW                     (0x00000010)
1652 #define MPI_SCSIDEVPAGE1_RP_RD_STRM                     (0x00000020)
1653 #define MPI_SCSIDEVPAGE1_RP_RTI                         (0x00000040)
1654 #define MPI_SCSIDEVPAGE1_RP_PCOMP_EN                    (0x00000080)
1655 #define MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK        (0x0000FF00)
1656 #define MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD       (8)
1657 #define MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK        (0x00FF0000)
1658 #define MPI_SCSIDEVPAGE1_RP_SHIFT_MAX_SYNC_OFFSET       (16)
1659 #define MPI_SCSIDEVPAGE1_RP_IDP                         (0x08000000)
1660 #define MPI_SCSIDEVPAGE1_RP_WIDE                        (0x20000000)
1661 #define MPI_SCSIDEVPAGE1_RP_AIP                         (0x80000000)
1662 
1663 #define MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED           (0x00000002)
1664 #define MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED           (0x00000004)
1665 #define MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE    (0x00000008)
1666 #define MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG             (0x00000010)
1667 
1668 
1669 typedef struct _CONFIG_PAGE_SCSI_DEVICE_2
1670 {
1671     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1672     U32                     DomainValidation;           /* 04h */
1673     U32                     ParityPipeSelect;           /* 08h */
1674     U32                     DataPipeSelect;             /* 0Ch */
1675 } CONFIG_PAGE_SCSI_DEVICE_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_2,
1676   SCSIDevicePage2_t, MPI_POINTER pSCSIDevicePage2_t;
1677 
1678 #define MPI_SCSIDEVPAGE2_PAGEVERSION                    (0x01)
1679 
1680 #define MPI_SCSIDEVPAGE2_DV_ISI_ENABLE                  (0x00000010)
1681 #define MPI_SCSIDEVPAGE2_DV_SECONDARY_DRIVER_ENABLE     (0x00000020)
1682 #define MPI_SCSIDEVPAGE2_DV_SLEW_RATE_CTRL              (0x00000380)
1683 #define MPI_SCSIDEVPAGE2_DV_PRIM_DRIVE_STR_CTRL         (0x00001C00)
1684 #define MPI_SCSIDEVPAGE2_DV_SECOND_DRIVE_STR_CTRL       (0x0000E000)
1685 #define MPI_SCSIDEVPAGE2_DV_XCLKH_ST                    (0x10000000)
1686 #define MPI_SCSIDEVPAGE2_DV_XCLKS_ST                    (0x20000000)
1687 #define MPI_SCSIDEVPAGE2_DV_XCLKH_DT                    (0x40000000)
1688 #define MPI_SCSIDEVPAGE2_DV_XCLKS_DT                    (0x80000000)
1689 
1690 #define MPI_SCSIDEVPAGE2_PPS_PPS_MASK                   (0x00000003)
1691 
1692 #define MPI_SCSIDEVPAGE2_DPS_BIT_0_PL_SELECT_MASK       (0x00000003)
1693 #define MPI_SCSIDEVPAGE2_DPS_BIT_1_PL_SELECT_MASK       (0x0000000C)
1694 #define MPI_SCSIDEVPAGE2_DPS_BIT_2_PL_SELECT_MASK       (0x00000030)
1695 #define MPI_SCSIDEVPAGE2_DPS_BIT_3_PL_SELECT_MASK       (0x000000C0)
1696 #define MPI_SCSIDEVPAGE2_DPS_BIT_4_PL_SELECT_MASK       (0x00000300)
1697 #define MPI_SCSIDEVPAGE2_DPS_BIT_5_PL_SELECT_MASK       (0x00000C00)
1698 #define MPI_SCSIDEVPAGE2_DPS_BIT_6_PL_SELECT_MASK       (0x00003000)
1699 #define MPI_SCSIDEVPAGE2_DPS_BIT_7_PL_SELECT_MASK       (0x0000C000)
1700 #define MPI_SCSIDEVPAGE2_DPS_BIT_8_PL_SELECT_MASK       (0x00030000)
1701 #define MPI_SCSIDEVPAGE2_DPS_BIT_9_PL_SELECT_MASK       (0x000C0000)
1702 #define MPI_SCSIDEVPAGE2_DPS_BIT_10_PL_SELECT_MASK      (0x00300000)
1703 #define MPI_SCSIDEVPAGE2_DPS_BIT_11_PL_SELECT_MASK      (0x00C00000)
1704 #define MPI_SCSIDEVPAGE2_DPS_BIT_12_PL_SELECT_MASK      (0x03000000)
1705 #define MPI_SCSIDEVPAGE2_DPS_BIT_13_PL_SELECT_MASK      (0x0C000000)
1706 #define MPI_SCSIDEVPAGE2_DPS_BIT_14_PL_SELECT_MASK      (0x30000000)
1707 #define MPI_SCSIDEVPAGE2_DPS_BIT_15_PL_SELECT_MASK      (0xC0000000)
1708 
1709 
1710 typedef struct _CONFIG_PAGE_SCSI_DEVICE_3
1711 {
1712     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1713     U16                     MsgRejectCount;             /* 04h */
1714     U16                     PhaseErrorCount;            /* 06h */
1715     U16                     ParityErrorCount;           /* 08h */
1716     U16                     Reserved;                   /* 0Ah */
1717 } CONFIG_PAGE_SCSI_DEVICE_3, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_3,
1718   SCSIDevicePage3_t, MPI_POINTER pSCSIDevicePage3_t;
1719 
1720 #define MPI_SCSIDEVPAGE3_PAGEVERSION                    (0x00)
1721 
1722 #define MPI_SCSIDEVPAGE3_MAX_COUNTER                    (0xFFFE)
1723 #define MPI_SCSIDEVPAGE3_UNSUPPORTED_COUNTER            (0xFFFF)
1724 
1725 
1726 /****************************************************************************
1727 *   FC Port Config Pages
1728 ****************************************************************************/
1729 
1730 typedef struct _CONFIG_PAGE_FC_PORT_0
1731 {
1732     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1733     U32                     Flags;                      /* 04h */
1734     U8                      MPIPortNumber;              /* 08h */
1735     U8                      LinkType;                   /* 09h */
1736     U8                      PortState;                  /* 0Ah */
1737     U8                      Reserved;                   /* 0Bh */
1738     U32                     PortIdentifier;             /* 0Ch */
1739     U64                     WWNN;                       /* 10h */
1740     U64                     WWPN;                       /* 18h */
1741     U32                     SupportedServiceClass;      /* 20h */
1742     U32                     SupportedSpeeds;            /* 24h */
1743     U32                     CurrentSpeed;               /* 28h */
1744     U32                     MaxFrameSize;               /* 2Ch */
1745     U64                     FabricWWNN;                 /* 30h */
1746     U64                     FabricWWPN;                 /* 38h */
1747     U32                     DiscoveredPortsCount;       /* 40h */
1748     U32                     MaxInitiators;              /* 44h */
1749     U8                      MaxAliasesSupported;        /* 48h */
1750     U8                      MaxHardAliasesSupported;    /* 49h */
1751     U8                      NumCurrentAliases;          /* 4Ah */
1752     U8                      Reserved1;                  /* 4Bh */
1753 } CONFIG_PAGE_FC_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_0,
1754   FCPortPage0_t, MPI_POINTER pFCPortPage0_t;
1755 
1756 #define MPI_FCPORTPAGE0_PAGEVERSION                     (0x02)
1757 
1758 #define MPI_FCPORTPAGE0_FLAGS_PROT_MASK                 (0x0000000F)
1759 #define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_INIT             (MPI_PORTFACTS_PROTOCOL_INITIATOR)
1760 #define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_TARG             (MPI_PORTFACTS_PROTOCOL_TARGET)
1761 #define MPI_FCPORTPAGE0_FLAGS_PROT_LAN                  (MPI_PORTFACTS_PROTOCOL_LAN)
1762 #define MPI_FCPORTPAGE0_FLAGS_PROT_LOGBUSADDR           (MPI_PORTFACTS_PROTOCOL_LOGBUSADDR)
1763 
1764 #define MPI_FCPORTPAGE0_FLAGS_ALIAS_ALPA_SUPPORTED      (0x00000010)
1765 #define MPI_FCPORTPAGE0_FLAGS_ALIAS_WWN_SUPPORTED       (0x00000020)
1766 #define MPI_FCPORTPAGE0_FLAGS_FABRIC_WWN_VALID          (0x00000040)
1767 
1768 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_TYPE_MASK          (0x00000F00)
1769 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_NO_INIT            (0x00000000)
1770 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_POINT_TO_POINT     (0x00000100)
1771 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_PRIVATE_LOOP       (0x00000200)
1772 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_FABRIC_DIRECT      (0x00000400)
1773 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_PUBLIC_LOOP        (0x00000800)
1774 
1775 #define MPI_FCPORTPAGE0_LTYPE_RESERVED                  (0x00)
1776 #define MPI_FCPORTPAGE0_LTYPE_OTHER                     (0x01)
1777 #define MPI_FCPORTPAGE0_LTYPE_UNKNOWN                   (0x02)
1778 #define MPI_FCPORTPAGE0_LTYPE_COPPER                    (0x03)
1779 #define MPI_FCPORTPAGE0_LTYPE_SINGLE_1300               (0x04)
1780 #define MPI_FCPORTPAGE0_LTYPE_SINGLE_1500               (0x05)
1781 #define MPI_FCPORTPAGE0_LTYPE_50_LASER_MULTI            (0x06)
1782 #define MPI_FCPORTPAGE0_LTYPE_50_LED_MULTI              (0x07)
1783 #define MPI_FCPORTPAGE0_LTYPE_62_LASER_MULTI            (0x08)
1784 #define MPI_FCPORTPAGE0_LTYPE_62_LED_MULTI              (0x09)
1785 #define MPI_FCPORTPAGE0_LTYPE_MULTI_LONG_WAVE           (0x0A)
1786 #define MPI_FCPORTPAGE0_LTYPE_MULTI_SHORT_WAVE          (0x0B)
1787 #define MPI_FCPORTPAGE0_LTYPE_LASER_SHORT_WAVE          (0x0C)
1788 #define MPI_FCPORTPAGE0_LTYPE_LED_SHORT_WAVE            (0x0D)
1789 #define MPI_FCPORTPAGE0_LTYPE_1300_LONG_WAVE            (0x0E)
1790 #define MPI_FCPORTPAGE0_LTYPE_1500_LONG_WAVE            (0x0F)
1791 
1792 #define MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN               (0x01)      /*(SNIA)HBA_PORTSTATE_UNKNOWN       1 Unknown */
1793 #define MPI_FCPORTPAGE0_PORTSTATE_ONLINE                (0x02)      /*(SNIA)HBA_PORTSTATE_ONLINE        2 Operational */
1794 #define MPI_FCPORTPAGE0_PORTSTATE_OFFLINE               (0x03)      /*(SNIA)HBA_PORTSTATE_OFFLINE       3 User Offline */
1795 #define MPI_FCPORTPAGE0_PORTSTATE_BYPASSED              (0x04)      /*(SNIA)HBA_PORTSTATE_BYPASSED      4 Bypassed */
1796 #define MPI_FCPORTPAGE0_PORTSTATE_DIAGNOST              (0x05)      /*(SNIA)HBA_PORTSTATE_DIAGNOSTICS   5 In diagnostics mode */
1797 #define MPI_FCPORTPAGE0_PORTSTATE_LINKDOWN              (0x06)      /*(SNIA)HBA_PORTSTATE_LINKDOWN      6 Link Down */
1798 #define MPI_FCPORTPAGE0_PORTSTATE_ERROR                 (0x07)      /*(SNIA)HBA_PORTSTATE_ERROR         7 Port Error */
1799 #define MPI_FCPORTPAGE0_PORTSTATE_LOOPBACK              (0x08)      /*(SNIA)HBA_PORTSTATE_LOOPBACK      8 Loopback */
1800 
1801 #define MPI_FCPORTPAGE0_SUPPORT_CLASS_1                 (0x00000001)
1802 #define MPI_FCPORTPAGE0_SUPPORT_CLASS_2                 (0x00000002)
1803 #define MPI_FCPORTPAGE0_SUPPORT_CLASS_3                 (0x00000004)
1804 
1805 #define MPI_FCPORTPAGE0_SUPPORT_SPEED_UNKNOWN           (0x00000000) /* (SNIA)HBA_PORTSPEED_UNKNOWN 0   Unknown - transceiver incapable of reporting */
1806 #define MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED             (0x00000001) /* (SNIA)HBA_PORTSPEED_1GBIT   1   1 GBit/sec */
1807 #define MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED             (0x00000002) /* (SNIA)HBA_PORTSPEED_2GBIT   2   2 GBit/sec */
1808 #define MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED            (0x00000004) /* (SNIA)HBA_PORTSPEED_10GBIT  4  10 GBit/sec */
1809 #define MPI_FCPORTPAGE0_SUPPORT_4GBIT_SPEED             (0x00000008) /* (SNIA)HBA_PORTSPEED_4GBIT   8   4 GBit/sec */
1810 
1811 #define MPI_FCPORTPAGE0_CURRENT_SPEED_UNKNOWN           MPI_FCPORTPAGE0_SUPPORT_SPEED_UNKNOWN
1812 #define MPI_FCPORTPAGE0_CURRENT_SPEED_1GBIT             MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED
1813 #define MPI_FCPORTPAGE0_CURRENT_SPEED_2GBIT             MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED
1814 #define MPI_FCPORTPAGE0_CURRENT_SPEED_10GBIT            MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED
1815 #define MPI_FCPORTPAGE0_CURRENT_SPEED_4GBIT             MPI_FCPORTPAGE0_SUPPORT_4GBIT_SPEED
1816 #define MPI_FCPORTPAGE0_CURRENT_SPEED_NOT_NEGOTIATED    (0x00008000)        /* (SNIA)HBA_PORTSPEED_NOT_NEGOTIATED (1<<15) Speed not established */
1817 
1818 
1819 typedef struct _CONFIG_PAGE_FC_PORT_1
1820 {
1821     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1822     U32                     Flags;                      /* 04h */
1823     U64                     NoSEEPROMWWNN;              /* 08h */
1824     U64                     NoSEEPROMWWPN;              /* 10h */
1825     U8                      HardALPA;                   /* 18h */
1826     U8                      LinkConfig;                 /* 19h */
1827     U8                      TopologyConfig;             /* 1Ah */
1828     U8                      AltConnector;               /* 1Bh */
1829     U8                      NumRequestedAliases;        /* 1Ch */
1830     U8                      RR_TOV;                     /* 1Dh */
1831     U8                      InitiatorDeviceTimeout;     /* 1Eh */
1832     U8                      InitiatorIoPendTimeout;     /* 1Fh */
1833 } CONFIG_PAGE_FC_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_1,
1834   FCPortPage1_t, MPI_POINTER pFCPortPage1_t;
1835 
1836 #define MPI_FCPORTPAGE1_PAGEVERSION                     (0x06)
1837 
1838 #define MPI_FCPORTPAGE1_FLAGS_EXT_FCP_STATUS_EN         (0x08000000)
1839 #define MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY     (0x04000000)
1840 #define MPI_FCPORTPAGE1_FLAGS_FORCE_USE_NOSEEPROM_WWNS  (0x02000000)
1841 #define MPI_FCPORTPAGE1_FLAGS_VERBOSE_RESCAN_EVENTS     (0x01000000)
1842 #define MPI_FCPORTPAGE1_FLAGS_TARGET_MODE_OXID          (0x00800000)
1843 #define MPI_FCPORTPAGE1_FLAGS_PORT_OFFLINE              (0x00400000)
1844 #define MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK        (0x00200000)
1845 #define MPI_FCPORTPAGE1_FLAGS_TARGET_LARGE_CDB_ENABLE   (0x00000080)
1846 #define MPI_FCPORTPAGE1_FLAGS_MASK_RR_TOV_UNITS         (0x00000070)
1847 #define MPI_FCPORTPAGE1_FLAGS_SUPPRESS_PROT_REG         (0x00000008)
1848 #define MPI_FCPORTPAGE1_FLAGS_PLOGI_ON_LOGO             (0x00000004)
1849 #define MPI_FCPORTPAGE1_FLAGS_MAINTAIN_LOGINS           (0x00000002)
1850 #define MPI_FCPORTPAGE1_FLAGS_SORT_BY_DID               (0x00000001)
1851 #define MPI_FCPORTPAGE1_FLAGS_SORT_BY_WWN               (0x00000000)
1852 
1853 #define MPI_FCPORTPAGE1_FLAGS_PROT_MASK                 (0xF0000000)
1854 #define MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT                (28)
1855 #define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_INIT             ((U32)MPI_PORTFACTS_PROTOCOL_INITIATOR << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT)
1856 #define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_TARG             ((U32)MPI_PORTFACTS_PROTOCOL_TARGET << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT)
1857 #define MPI_FCPORTPAGE1_FLAGS_PROT_LAN                  ((U32)MPI_PORTFACTS_PROTOCOL_LAN << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT)
1858 #define MPI_FCPORTPAGE1_FLAGS_PROT_LOGBUSADDR           ((U32)MPI_PORTFACTS_PROTOCOL_LOGBUSADDR << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT)
1859 
1860 #define MPI_FCPORTPAGE1_FLAGS_NONE_RR_TOV_UNITS         (0x00000000)
1861 #define MPI_FCPORTPAGE1_FLAGS_THOUSANDTH_RR_TOV_UNITS   (0x00000010)
1862 #define MPI_FCPORTPAGE1_FLAGS_TENTH_RR_TOV_UNITS        (0x00000030)
1863 #define MPI_FCPORTPAGE1_FLAGS_TEN_RR_TOV_UNITS          (0x00000050)
1864 
1865 #define MPI_FCPORTPAGE1_HARD_ALPA_NOT_USED              (0xFF)
1866 
1867 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_MASK              (0x0F)
1868 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_1GIG              (0x00)
1869 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_2GIG              (0x01)
1870 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_4GIG              (0x02)
1871 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_10GIG             (0x03)
1872 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_AUTO              (0x0F)
1873 
1874 #define MPI_FCPORTPAGE1_TOPOLOGY_MASK                   (0x0F)
1875 #define MPI_FCPORTPAGE1_TOPOLOGY_NLPORT                 (0x01)
1876 #define MPI_FCPORTPAGE1_TOPOLOGY_NPORT                  (0x02)
1877 #define MPI_FCPORTPAGE1_TOPOLOGY_AUTO                   (0x0F)
1878 
1879 #define MPI_FCPORTPAGE1_ALT_CONN_UNKNOWN                (0x00)
1880 
1881 #define MPI_FCPORTPAGE1_INITIATOR_DEV_TIMEOUT_MASK      (0x7F)
1882 #define MPI_FCPORTPAGE1_INITIATOR_DEV_UNIT_16           (0x80)
1883 
1884 
1885 typedef struct _CONFIG_PAGE_FC_PORT_2
1886 {
1887     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1888     U8                      NumberActive;               /* 04h */
1889     U8                      ALPA[127];                  /* 05h */
1890 } CONFIG_PAGE_FC_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_2,
1891   FCPortPage2_t, MPI_POINTER pFCPortPage2_t;
1892 
1893 #define MPI_FCPORTPAGE2_PAGEVERSION                     (0x01)
1894 
1895 
1896 typedef struct _WWN_FORMAT
1897 {
1898     U64                     WWNN;                       /* 00h */
1899     U64                     WWPN;                       /* 08h */
1900 } WWN_FORMAT, MPI_POINTER PTR_WWN_FORMAT,
1901   WWNFormat, MPI_POINTER pWWNFormat;
1902 
1903 typedef union _FC_PORT_PERSISTENT_PHYSICAL_ID
1904 {
1905     WWN_FORMAT              WWN;
1906     U32                     Did;
1907 } FC_PORT_PERSISTENT_PHYSICAL_ID, MPI_POINTER PTR_FC_PORT_PERSISTENT_PHYSICAL_ID,
1908   PersistentPhysicalId_t, MPI_POINTER pPersistentPhysicalId_t;
1909 
1910 typedef struct _FC_PORT_PERSISTENT
1911 {
1912     FC_PORT_PERSISTENT_PHYSICAL_ID  PhysicalIdentifier; /* 00h */
1913     U8                              TargetID;           /* 10h */
1914     U8                              Bus;                /* 11h */
1915     U16                             Flags;              /* 12h */
1916 } FC_PORT_PERSISTENT, MPI_POINTER PTR_FC_PORT_PERSISTENT,
1917   PersistentData_t, MPI_POINTER pPersistentData_t;
1918 
1919 #define MPI_PERSISTENT_FLAGS_SHIFT                      (16)
1920 #define MPI_PERSISTENT_FLAGS_ENTRY_VALID                (0x0001)
1921 #define MPI_PERSISTENT_FLAGS_SCAN_ID                    (0x0002)
1922 #define MPI_PERSISTENT_FLAGS_SCAN_LUNS                  (0x0004)
1923 #define MPI_PERSISTENT_FLAGS_BOOT_DEVICE                (0x0008)
1924 #define MPI_PERSISTENT_FLAGS_BY_DID                     (0x0080)
1925 
1926 /*
1927  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1928  * one and check Header.PageLength at runtime.
1929  */
1930 #ifndef MPI_FC_PORT_PAGE_3_ENTRY_MAX
1931 #define MPI_FC_PORT_PAGE_3_ENTRY_MAX        (1)
1932 #endif
1933 
1934 typedef struct _CONFIG_PAGE_FC_PORT_3
1935 {
1936     CONFIG_PAGE_HEADER      Header;                                 /* 00h */
1937     FC_PORT_PERSISTENT      Entry[MPI_FC_PORT_PAGE_3_ENTRY_MAX];    /* 04h */
1938 } CONFIG_PAGE_FC_PORT_3, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_3,
1939   FCPortPage3_t, MPI_POINTER pFCPortPage3_t;
1940 
1941 #define MPI_FCPORTPAGE3_PAGEVERSION                     (0x01)
1942 
1943 
1944 typedef struct _CONFIG_PAGE_FC_PORT_4
1945 {
1946     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1947     U32                     PortFlags;                  /* 04h */
1948     U32                     PortSettings;               /* 08h */
1949 } CONFIG_PAGE_FC_PORT_4, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_4,
1950   FCPortPage4_t, MPI_POINTER pFCPortPage4_t;
1951 
1952 #define MPI_FCPORTPAGE4_PAGEVERSION                     (0x00)
1953 
1954 #define MPI_FCPORTPAGE4_PORT_FLAGS_ALTERNATE_CHS        (0x00000008)
1955 
1956 #define MPI_FCPORTPAGE4_PORT_MASK_INIT_HBA              (0x00000030)
1957 #define MPI_FCPORTPAGE4_PORT_DISABLE_INIT_HBA           (0x00000000)
1958 #define MPI_FCPORTPAGE4_PORT_BIOS_INIT_HBA              (0x00000010)
1959 #define MPI_FCPORTPAGE4_PORT_OS_INIT_HBA                (0x00000020)
1960 #define MPI_FCPORTPAGE4_PORT_BIOS_OS_INIT_HBA           (0x00000030)
1961 #define MPI_FCPORTPAGE4_PORT_REMOVABLE_MEDIA            (0x000000C0)
1962 #define MPI_FCPORTPAGE4_PORT_SPINUP_DELAY_MASK          (0x00000F00)
1963 
1964 
1965 typedef struct _CONFIG_PAGE_FC_PORT_5_ALIAS_INFO
1966 {
1967     U8      Flags;                                      /* 00h */
1968     U8      AliasAlpa;                                  /* 01h */
1969     U16     Reserved;                                   /* 02h */
1970     U64     AliasWWNN;                                  /* 04h */
1971     U64     AliasWWPN;                                  /* 0Ch */
1972 } CONFIG_PAGE_FC_PORT_5_ALIAS_INFO,
1973   MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_5_ALIAS_INFO,
1974   FcPortPage5AliasInfo_t, MPI_POINTER pFcPortPage5AliasInfo_t;
1975 
1976 typedef struct _CONFIG_PAGE_FC_PORT_5
1977 {
1978     CONFIG_PAGE_HEADER                  Header;         /* 00h */
1979     CONFIG_PAGE_FC_PORT_5_ALIAS_INFO    AliasInfo;      /* 04h */
1980 } CONFIG_PAGE_FC_PORT_5, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_5,
1981   FCPortPage5_t, MPI_POINTER pFCPortPage5_t;
1982 
1983 #define MPI_FCPORTPAGE5_PAGEVERSION                     (0x02)
1984 
1985 #define MPI_FCPORTPAGE5_FLAGS_ALPA_ACQUIRED             (0x01)
1986 #define MPI_FCPORTPAGE5_FLAGS_HARD_ALPA                 (0x02)
1987 #define MPI_FCPORTPAGE5_FLAGS_HARD_WWNN                 (0x04)
1988 #define MPI_FCPORTPAGE5_FLAGS_HARD_WWPN                 (0x08)
1989 #define MPI_FCPORTPAGE5_FLAGS_DISABLE                   (0x10)
1990 
1991 typedef struct _CONFIG_PAGE_FC_PORT_6
1992 {
1993     CONFIG_PAGE_HEADER      Header;                     /* 00h */
1994     U32                     Reserved;                   /* 04h */
1995     U64                     TimeSinceReset;             /* 08h */
1996     U64                     TxFrames;                   /* 10h */
1997     U64                     RxFrames;                   /* 18h */
1998     U64                     TxWords;                    /* 20h */
1999     U64                     RxWords;                    /* 28h */
2000     U64                     LipCount;                   /* 30h */
2001     U64                     NosCount;                   /* 38h */
2002     U64                     ErrorFrames;                /* 40h */
2003     U64                     DumpedFrames;               /* 48h */
2004     U64                     LinkFailureCount;           /* 50h */
2005     U64                     LossOfSyncCount;            /* 58h */
2006     U64                     LossOfSignalCount;          /* 60h */
2007     U64                     PrimitiveSeqErrCount;       /* 68h */
2008     U64                     InvalidTxWordCount;         /* 70h */
2009     U64                     InvalidCrcCount;            /* 78h */
2010     U64                     FcpInitiatorIoCount;        /* 80h */
2011 } CONFIG_PAGE_FC_PORT_6, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_6,
2012   FCPortPage6_t, MPI_POINTER pFCPortPage6_t;
2013 
2014 #define MPI_FCPORTPAGE6_PAGEVERSION                     (0x00)
2015 
2016 
2017 typedef struct _CONFIG_PAGE_FC_PORT_7
2018 {
2019     CONFIG_PAGE_HEADER      Header;                     /* 00h */
2020     U32                     Reserved;                   /* 04h */
2021     U8                      PortSymbolicName[256];      /* 08h */
2022 } CONFIG_PAGE_FC_PORT_7, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_7,
2023   FCPortPage7_t, MPI_POINTER pFCPortPage7_t;
2024 
2025 #define MPI_FCPORTPAGE7_PAGEVERSION                     (0x00)
2026 
2027 
2028 typedef struct _CONFIG_PAGE_FC_PORT_8
2029 {
2030     CONFIG_PAGE_HEADER      Header;                     /* 00h */
2031     U32                     BitVector[8];               /* 04h */
2032 } CONFIG_PAGE_FC_PORT_8, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_8,
2033   FCPortPage8_t, MPI_POINTER pFCPortPage8_t;
2034 
2035 #define MPI_FCPORTPAGE8_PAGEVERSION                     (0x00)
2036 
2037 
2038 typedef struct _CONFIG_PAGE_FC_PORT_9
2039 {
2040     CONFIG_PAGE_HEADER      Header;                     /* 00h */
2041     U32                     Reserved;                   /* 04h */
2042     U64                     GlobalWWPN;                 /* 08h */
2043     U64                     GlobalWWNN;                 /* 10h */
2044     U32                     UnitType;                   /* 18h */
2045     U32                     PhysicalPortNumber;         /* 1Ch */
2046     U32                     NumAttachedNodes;           /* 20h */
2047     U16                     IPVersion;                  /* 24h */
2048     U16                     UDPPortNumber;              /* 26h */
2049     U8                      IPAddress[16];              /* 28h */
2050     U16                     Reserved1;                  /* 38h */
2051     U16                     TopologyDiscoveryFlags;     /* 3Ah */
2052 } CONFIG_PAGE_FC_PORT_9, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_9,
2053   FCPortPage9_t, MPI_POINTER pFCPortPage9_t;
2054 
2055 #define MPI_FCPORTPAGE9_PAGEVERSION                     (0x00)
2056 
2057 
2058 typedef struct _CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA
2059 {
2060     U8                      Id;                         /* 10h */
2061     U8                      ExtId;                      /* 11h */
2062     U8                      Connector;                  /* 12h */
2063     U8                      Transceiver[8];             /* 13h */
2064     U8                      Encoding;                   /* 1Bh */
2065     U8                      BitRate_100mbs;             /* 1Ch */
2066     U8                      Reserved1;                  /* 1Dh */
2067     U8                      Length9u_km;                /* 1Eh */
2068     U8                      Length9u_100m;              /* 1Fh */
2069     U8                      Length50u_10m;              /* 20h */
2070     U8                      Length62p5u_10m;            /* 21h */
2071     U8                      LengthCopper_m;             /* 22h */
2072     U8                      Reseverved2;                /* 22h */
2073     U8                      VendorName[16];             /* 24h */
2074     U8                      Reserved3;                  /* 34h */
2075     U8                      VendorOUI[3];               /* 35h */
2076     U8                      VendorPN[16];               /* 38h */
2077     U8                      VendorRev[4];               /* 48h */
2078     U16                     Wavelength;                 /* 4Ch */
2079     U8                      Reserved4;                  /* 4Eh */
2080     U8                      CC_BASE;                    /* 4Fh */
2081 } CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA,
2082   MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA,
2083   FCPortPage10BaseSfpData_t, MPI_POINTER pFCPortPage10BaseSfpData_t;
2084 
2085 #define MPI_FCPORT10_BASE_ID_UNKNOWN        (0x00)
2086 #define MPI_FCPORT10_BASE_ID_GBIC           (0x01)
2087 #define MPI_FCPORT10_BASE_ID_FIXED          (0x02)
2088 #define MPI_FCPORT10_BASE_ID_SFP            (0x03)
2089 #define MPI_FCPORT10_BASE_ID_SFP_MIN        (0x04)
2090 #define MPI_FCPORT10_BASE_ID_SFP_MAX        (0x7F)
2091 #define MPI_FCPORT10_BASE_ID_VEND_SPEC_MASK (0x80)
2092 
2093 #define MPI_FCPORT10_BASE_EXTID_UNKNOWN     (0x00)
2094 #define MPI_FCPORT10_BASE_EXTID_MODDEF1     (0x01)
2095 #define MPI_FCPORT10_BASE_EXTID_MODDEF2     (0x02)
2096 #define MPI_FCPORT10_BASE_EXTID_MODDEF3     (0x03)
2097 #define MPI_FCPORT10_BASE_EXTID_SEEPROM     (0x04)
2098 #define MPI_FCPORT10_BASE_EXTID_MODDEF5     (0x05)
2099 #define MPI_FCPORT10_BASE_EXTID_MODDEF6     (0x06)
2100 #define MPI_FCPORT10_BASE_EXTID_MODDEF7     (0x07)
2101 #define MPI_FCPORT10_BASE_EXTID_VNDSPC_MASK (0x80)
2102 
2103 #define MPI_FCPORT10_BASE_CONN_UNKNOWN      (0x00)
2104 #define MPI_FCPORT10_BASE_CONN_SC           (0x01)
2105 #define MPI_FCPORT10_BASE_CONN_COPPER1      (0x02)
2106 #define MPI_FCPORT10_BASE_CONN_COPPER2      (0x03)
2107 #define MPI_FCPORT10_BASE_CONN_BNC_TNC      (0x04)
2108 #define MPI_FCPORT10_BASE_CONN_COAXIAL      (0x05)
2109 #define MPI_FCPORT10_BASE_CONN_FIBERJACK    (0x06)
2110 #define MPI_FCPORT10_BASE_CONN_LC           (0x07)
2111 #define MPI_FCPORT10_BASE_CONN_MT_RJ        (0x08)
2112 #define MPI_FCPORT10_BASE_CONN_MU           (0x09)
2113 #define MPI_FCPORT10_BASE_CONN_SG           (0x0A)
2114 #define MPI_FCPORT10_BASE_CONN_OPT_PIGT     (0x0B)
2115 #define MPI_FCPORT10_BASE_CONN_RSV1_MIN     (0x0C)
2116 #define MPI_FCPORT10_BASE_CONN_RSV1_MAX     (0x1F)
2117 #define MPI_FCPORT10_BASE_CONN_HSSDC_II     (0x20)
2118 #define MPI_FCPORT10_BASE_CONN_CPR_PIGT     (0x21)
2119 #define MPI_FCPORT10_BASE_CONN_RSV2_MIN     (0x22)
2120 #define MPI_FCPORT10_BASE_CONN_RSV2_MAX     (0x7F)
2121 #define MPI_FCPORT10_BASE_CONN_VNDSPC_MASK  (0x80)
2122 
2123 #define MPI_FCPORT10_BASE_ENCODE_UNSPEC     (0x00)
2124 #define MPI_FCPORT10_BASE_ENCODE_8B10B      (0x01)
2125 #define MPI_FCPORT10_BASE_ENCODE_4B5B       (0x02)
2126 #define MPI_FCPORT10_BASE_ENCODE_NRZ        (0x03)
2127 #define MPI_FCPORT10_BASE_ENCODE_MANCHESTER (0x04)
2128 
2129 
2130 typedef struct _CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA
2131 {
2132     U8                      Options[2];                 /* 50h */
2133     U8                      BitRateMax;                 /* 52h */
2134     U8                      BitRateMin;                 /* 53h */
2135     U8                      VendorSN[16];               /* 54h */
2136     U8                      DateCode[8];                /* 64h */
2137     U8                      DiagMonitoringType;         /* 6Ch */
2138     U8                      EnhancedOptions;            /* 6Dh */
2139     U8                      SFF8472Compliance;          /* 6Eh */
2140     U8                      CC_EXT;                     /* 6Fh */
2141 } CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA,
2142   MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA,
2143   FCPortPage10ExtendedSfpData_t, MPI_POINTER pFCPortPage10ExtendedSfpData_t;
2144 
2145 #define MPI_FCPORT10_EXT_OPTION1_RATESEL    (0x20)
2146 #define MPI_FCPORT10_EXT_OPTION1_TX_DISABLE (0x10)
2147 #define MPI_FCPORT10_EXT_OPTION1_TX_FAULT   (0x08)
2148 #define MPI_FCPORT10_EXT_OPTION1_LOS_INVERT (0x04)
2149 #define MPI_FCPORT10_EXT_OPTION1_LOS        (0x02)
2150 
2151 
2152 typedef struct _CONFIG_PAGE_FC_PORT_10
2153 {
2154     CONFIG_PAGE_HEADER                          Header;             /* 00h */
2155     U8                                          Flags;              /* 04h */
2156     U8                                          Reserved1;          /* 05h */
2157     U16                                         Reserved2;          /* 06h */
2158     U32                                         HwConfig1;          /* 08h */
2159     U32                                         HwConfig2;          /* 0Ch */
2160     CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA        Base;               /* 10h */
2161     CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA    Extended;           /* 50h */
2162     U8                                          VendorSpecific[32]; /* 70h */
2163 } CONFIG_PAGE_FC_PORT_10, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10,
2164   FCPortPage10_t, MPI_POINTER pFCPortPage10_t;
2165 
2166 #define MPI_FCPORTPAGE10_PAGEVERSION                    (0x01)
2167 
2168 /* standard MODDEF pin definitions (from GBIC spec.) */
2169 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_MASK              (0x00000007)
2170 #define MPI_FCPORTPAGE10_FLAGS_MODDEF2                  (0x00000001)
2171 #define MPI_FCPORTPAGE10_FLAGS_MODDEF1                  (0x00000002)
2172 #define MPI_FCPORTPAGE10_FLAGS_MODDEF0                  (0x00000004)
2173 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_NOGBIC            (0x00000007)
2174 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_CPR_IEEE_CX       (0x00000006)
2175 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_COPPER            (0x00000005)
2176 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_OPTICAL_LW        (0x00000004)
2177 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_SEEPROM           (0x00000003)
2178 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_SW_OPTICAL        (0x00000002)
2179 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_LX_IEEE_OPT_LW    (0x00000001)
2180 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_SX_IEEE_OPT_SW    (0x00000000)
2181 
2182 #define MPI_FCPORTPAGE10_FLAGS_CC_BASE_OK               (0x00000010)
2183 #define MPI_FCPORTPAGE10_FLAGS_CC_EXT_OK                (0x00000020)
2184 
2185 
2186 /****************************************************************************
2187 *   FC Device Config Pages
2188 ****************************************************************************/
2189 
2190 typedef struct _CONFIG_PAGE_FC_DEVICE_0
2191 {
2192     CONFIG_PAGE_HEADER      Header;                     /* 00h */
2193     U64                     WWNN;                       /* 04h */
2194     U64                     WWPN;                       /* 0Ch */
2195     U32                     PortIdentifier;             /* 14h */
2196     U8                      Protocol;                   /* 18h */
2197     U8                      Flags;                      /* 19h */
2198     U16                     BBCredit;                   /* 1Ah */
2199     U16                     MaxRxFrameSize;             /* 1Ch */
2200     U8                      ADISCHardALPA;              /* 1Eh */
2201     U8                      PortNumber;                 /* 1Fh */
2202     U8                      FcPhLowestVersion;          /* 20h */
2203     U8                      FcPhHighestVersion;         /* 21h */
2204     U8                      CurrentTargetID;            /* 22h */
2205     U8                      CurrentBus;                 /* 23h */
2206 } CONFIG_PAGE_FC_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_FC_DEVICE_0,
2207   FCDevicePage0_t, MPI_POINTER pFCDevicePage0_t;
2208 
2209 #define MPI_FC_DEVICE_PAGE0_PAGEVERSION                 (0x03)
2210 
2211 #define MPI_FC_DEVICE_PAGE0_FLAGS_TARGETID_BUS_VALID    (0x01)
2212 #define MPI_FC_DEVICE_PAGE0_FLAGS_PLOGI_INVALID         (0x02)
2213 #define MPI_FC_DEVICE_PAGE0_FLAGS_PRLI_INVALID          (0x04)
2214 
2215 #define MPI_FC_DEVICE_PAGE0_PROT_IP                     (0x01)
2216 #define MPI_FC_DEVICE_PAGE0_PROT_FCP_TARGET             (0x02)
2217 #define MPI_FC_DEVICE_PAGE0_PROT_FCP_INITIATOR          (0x04)
2218 #define MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY              (0x08)
2219 
2220 #define MPI_FC_DEVICE_PAGE0_PGAD_PORT_MASK      (MPI_FC_DEVICE_PGAD_PORT_MASK)
2221 #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_MASK      (MPI_FC_DEVICE_PGAD_FORM_MASK)
2222 #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_NEXT_DID  (MPI_FC_DEVICE_PGAD_FORM_NEXT_DID)
2223 #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_BUS_TID   (MPI_FC_DEVICE_PGAD_FORM_BUS_TID)
2224 #define MPI_FC_DEVICE_PAGE0_PGAD_DID_MASK       (MPI_FC_DEVICE_PGAD_ND_DID_MASK)
2225 #define MPI_FC_DEVICE_PAGE0_PGAD_BUS_MASK       (MPI_FC_DEVICE_PGAD_BT_BUS_MASK)
2226 #define MPI_FC_DEVICE_PAGE0_PGAD_BUS_SHIFT      (MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT)
2227 #define MPI_FC_DEVICE_PAGE0_PGAD_TID_MASK       (MPI_FC_DEVICE_PGAD_BT_TID_MASK)
2228 
2229 #define MPI_FC_DEVICE_PAGE0_HARD_ALPA_UNKNOWN   (0xFF)
2230 
2231 /****************************************************************************
2232 *   RAID Volume Config Pages
2233 ****************************************************************************/
2234 
2235 typedef struct _RAID_VOL0_PHYS_DISK
2236 {
2237     U16                         Reserved;               /* 00h */
2238     U8                          PhysDiskMap;            /* 02h */
2239     U8                          PhysDiskNum;            /* 03h */
2240 } RAID_VOL0_PHYS_DISK, MPI_POINTER PTR_RAID_VOL0_PHYS_DISK,
2241   RaidVol0PhysDisk_t, MPI_POINTER pRaidVol0PhysDisk_t;
2242 
2243 #define MPI_RAIDVOL0_PHYSDISK_PRIMARY                   (0x01)
2244 #define MPI_RAIDVOL0_PHYSDISK_SECONDARY                 (0x02)
2245 
2246 typedef struct _RAID_VOL0_STATUS
2247 {
2248     U8                          Flags;                  /* 00h */
2249     U8                          State;                  /* 01h */
2250     U16                         Reserved;               /* 02h */
2251 } RAID_VOL0_STATUS, MPI_POINTER PTR_RAID_VOL0_STATUS,
2252   RaidVol0Status_t, MPI_POINTER pRaidVol0Status_t;
2253 
2254 /* RAID Volume Page 0 VolumeStatus defines */
2255 #define MPI_RAIDVOL0_STATUS_FLAG_ENABLED                (0x01)
2256 #define MPI_RAIDVOL0_STATUS_FLAG_QUIESCED               (0x02)
2257 #define MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS     (0x04)
2258 #define MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE        (0x08)
2259 #define MPI_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL   (0x10)
2260 
2261 #define MPI_RAIDVOL0_STATUS_STATE_OPTIMAL               (0x00)
2262 #define MPI_RAIDVOL0_STATUS_STATE_DEGRADED              (0x01)
2263 #define MPI_RAIDVOL0_STATUS_STATE_FAILED                (0x02)
2264 #define MPI_RAIDVOL0_STATUS_STATE_MISSING               (0x03)
2265 
2266 typedef struct _RAID_VOL0_SETTINGS
2267 {
2268     U16                         Settings;       /* 00h */
2269     U8                          HotSparePool;   /* 01h */ /* MPI_RAID_HOT_SPARE_POOL_ */
2270     U8                          Reserved;       /* 02h */
2271 } RAID_VOL0_SETTINGS, MPI_POINTER PTR_RAID_VOL0_SETTINGS,
2272   RaidVol0Settings, MPI_POINTER pRaidVol0Settings;
2273 
2274 /* RAID Volume Page 0 VolumeSettings defines */
2275 #define MPI_RAIDVOL0_SETTING_WRITE_CACHING_ENABLE       (0x0001)
2276 #define MPI_RAIDVOL0_SETTING_OFFLINE_ON_SMART           (0x0002)
2277 #define MPI_RAIDVOL0_SETTING_AUTO_CONFIGURE             (0x0004)
2278 #define MPI_RAIDVOL0_SETTING_PRIORITY_RESYNC            (0x0008)
2279 #define MPI_RAIDVOL0_SETTING_FAST_DATA_SCRUBBING_0102   (0x0020) /* obsolete */
2280 
2281 #define MPI_RAIDVOL0_SETTING_MASK_METADATA_SIZE         (0x00C0)
2282 #define MPI_RAIDVOL0_SETTING_64MB_METADATA_SIZE         (0x0000)
2283 #define MPI_RAIDVOL0_SETTING_512MB_METADATA_SIZE        (0x0040)
2284 
2285 #define MPI_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX      (0x0010)
2286 #define MPI_RAIDVOL0_SETTING_USE_DEFAULTS               (0x8000)
2287 
2288 /* RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */
2289 #define MPI_RAID_HOT_SPARE_POOL_0                       (0x01)
2290 #define MPI_RAID_HOT_SPARE_POOL_1                       (0x02)
2291 #define MPI_RAID_HOT_SPARE_POOL_2                       (0x04)
2292 #define MPI_RAID_HOT_SPARE_POOL_3                       (0x08)
2293 #define MPI_RAID_HOT_SPARE_POOL_4                       (0x10)
2294 #define MPI_RAID_HOT_SPARE_POOL_5                       (0x20)
2295 #define MPI_RAID_HOT_SPARE_POOL_6                       (0x40)
2296 #define MPI_RAID_HOT_SPARE_POOL_7                       (0x80)
2297 
2298 /*
2299  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2300  * one and check Header.PageLength at runtime.
2301  */
2302 #ifndef MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX
2303 #define MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX        (1)
2304 #endif
2305 
2306 typedef struct _CONFIG_PAGE_RAID_VOL_0
2307 {
2308     CONFIG_PAGE_HEADER      Header;         /* 00h */
2309     U8                      VolumeID;       /* 04h */
2310     U8                      VolumeBus;      /* 05h */
2311     U8                      VolumeIOC;      /* 06h */
2312     U8                      VolumeType;     /* 07h */ /* MPI_RAID_VOL_TYPE_ */
2313     RAID_VOL0_STATUS        VolumeStatus;   /* 08h */
2314     RAID_VOL0_SETTINGS      VolumeSettings; /* 0Ch */
2315     U32                     MaxLBA;         /* 10h */
2316     U32                     MaxLBAHigh;     /* 14h */
2317     U32                     StripeSize;     /* 18h */
2318     U32                     Reserved2;      /* 1Ch */
2319     U32                     Reserved3;      /* 20h */
2320     U8                      NumPhysDisks;   /* 24h */
2321     U8                      DataScrubRate;  /* 25h */
2322     U8                      ResyncRate;     /* 26h */
2323     U8                      InactiveStatus; /* 27h */
2324     RAID_VOL0_PHYS_DISK     PhysDisk[MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX];/* 28h */
2325 } CONFIG_PAGE_RAID_VOL_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_0,
2326   RaidVolumePage0_t, MPI_POINTER pRaidVolumePage0_t;
2327 
2328 #define MPI_RAIDVOLPAGE0_PAGEVERSION                    (0x07)
2329 
2330 /* values for RAID Volume Page 0 InactiveStatus field */
2331 #define MPI_RAIDVOLPAGE0_UNKNOWN_INACTIVE               (0x00)
2332 #define MPI_RAIDVOLPAGE0_STALE_METADATA_INACTIVE        (0x01)
2333 #define MPI_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE        (0x02)
2334 #define MPI_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE (0x03)
2335 #define MPI_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE          (0x04)
2336 #define MPI_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE (0x05)
2337 #define MPI_RAIDVOLPAGE0_PREVIOUSLY_DELETED             (0x06)
2338 
2339 
2340 typedef struct _CONFIG_PAGE_RAID_VOL_1
2341 {
2342     CONFIG_PAGE_HEADER      Header;         /* 00h */
2343     U8                      VolumeID;       /* 04h */
2344     U8                      VolumeBus;      /* 05h */
2345     U8                      VolumeIOC;      /* 06h */
2346     U8                      Reserved0;      /* 07h */
2347     U8                      GUID[24];       /* 08h */
2348     U8                      Name[32];       /* 20h */
2349     U64                     WWID;           /* 40h */
2350     U32                     Reserved1;      /* 48h */
2351     U32                     Reserved2;      /* 4Ch */
2352 } CONFIG_PAGE_RAID_VOL_1, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_1,
2353   RaidVolumePage1_t, MPI_POINTER pRaidVolumePage1_t;
2354 
2355 #define MPI_RAIDVOLPAGE1_PAGEVERSION                    (0x01)
2356 
2357 
2358 /****************************************************************************
2359 *   RAID Physical Disk Config Pages
2360 ****************************************************************************/
2361 
2362 typedef struct _RAID_PHYS_DISK0_ERROR_DATA
2363 {
2364     U8                      ErrorCdbByte;               /* 00h */
2365     U8                      ErrorSenseKey;              /* 01h */
2366     U16                     Reserved;                   /* 02h */
2367     U16                     ErrorCount;                 /* 04h */
2368     U8                      ErrorASC;                   /* 06h */
2369     U8                      ErrorASCQ;                  /* 07h */
2370     U16                     SmartCount;                 /* 08h */
2371     U8                      SmartASC;                   /* 0Ah */
2372     U8                      SmartASCQ;                  /* 0Bh */
2373 } RAID_PHYS_DISK0_ERROR_DATA, MPI_POINTER PTR_RAID_PHYS_DISK0_ERROR_DATA,
2374   RaidPhysDisk0ErrorData_t, MPI_POINTER pRaidPhysDisk0ErrorData_t;
2375 
2376 typedef struct _RAID_PHYS_DISK_INQUIRY_DATA
2377 {
2378     U8                          VendorID[8];            /* 00h */
2379     U8                          ProductID[16];          /* 08h */
2380     U8                          ProductRevLevel[4];     /* 18h */
2381     U8                          Info[32];               /* 1Ch */
2382 } RAID_PHYS_DISK0_INQUIRY_DATA, MPI_POINTER PTR_RAID_PHYS_DISK0_INQUIRY_DATA,
2383   RaidPhysDisk0InquiryData, MPI_POINTER pRaidPhysDisk0InquiryData;
2384 
2385 typedef struct _RAID_PHYS_DISK0_SETTINGS
2386 {
2387     U8              SepID;              /* 00h */
2388     U8              SepBus;             /* 01h */
2389     U8              HotSparePool;       /* 02h */ /* MPI_RAID_HOT_SPARE_POOL_ */
2390     U8              PhysDiskSettings;   /* 03h */
2391 } RAID_PHYS_DISK0_SETTINGS, MPI_POINTER PTR_RAID_PHYS_DISK0_SETTINGS,
2392   RaidPhysDiskSettings_t, MPI_POINTER pRaidPhysDiskSettings_t;
2393 
2394 typedef struct _RAID_PHYS_DISK0_STATUS
2395 {
2396     U8                              Flags;              /* 00h */
2397     U8                              State;              /* 01h */
2398     U16                             Reserved;           /* 02h */
2399 } RAID_PHYS_DISK0_STATUS, MPI_POINTER PTR_RAID_PHYS_DISK0_STATUS,
2400   RaidPhysDiskStatus_t, MPI_POINTER pRaidPhysDiskStatus_t;
2401 
2402 /* RAID Physical Disk PhysDiskStatus flags */
2403 
2404 #define MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC           (0x01)
2405 #define MPI_PHYSDISK0_STATUS_FLAG_QUIESCED              (0x02)
2406 #define MPI_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME       (0x04)
2407 #define MPI_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS      (0x00)
2408 #define MPI_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS  (0x08)
2409 
2410 #define MPI_PHYSDISK0_STATUS_ONLINE                     (0x00)
2411 #define MPI_PHYSDISK0_STATUS_MISSING                    (0x01)
2412 #define MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE             (0x02)
2413 #define MPI_PHYSDISK0_STATUS_FAILED                     (0x03)
2414 #define MPI_PHYSDISK0_STATUS_INITIALIZING               (0x04)
2415 #define MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED          (0x05)
2416 #define MPI_PHYSDISK0_STATUS_FAILED_REQUESTED           (0x06)
2417 #define MPI_PHYSDISK0_STATUS_OTHER_OFFLINE              (0xFF)
2418 
2419 typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_0
2420 {
2421     CONFIG_PAGE_HEADER              Header;             /* 00h */
2422     U8                              PhysDiskID;         /* 04h */
2423     U8                              PhysDiskBus;        /* 05h */
2424     U8                              PhysDiskIOC;        /* 06h */
2425     U8                              PhysDiskNum;        /* 07h */
2426     RAID_PHYS_DISK0_SETTINGS        PhysDiskSettings;   /* 08h */
2427     U32                             Reserved1;          /* 0Ch */
2428     U8                              ExtDiskIdentifier[8]; /* 10h */
2429     U8                              DiskIdentifier[16]; /* 18h */
2430     RAID_PHYS_DISK0_INQUIRY_DATA    InquiryData;        /* 28h */
2431     RAID_PHYS_DISK0_STATUS          PhysDiskStatus;     /* 64h */
2432     U32                             MaxLBA;             /* 68h */
2433     RAID_PHYS_DISK0_ERROR_DATA      ErrorData;          /* 6Ch */
2434 } CONFIG_PAGE_RAID_PHYS_DISK_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_0,
2435   RaidPhysDiskPage0_t, MPI_POINTER pRaidPhysDiskPage0_t;
2436 
2437 #define MPI_RAIDPHYSDISKPAGE0_PAGEVERSION           (0x02)
2438 
2439 
2440 typedef struct _RAID_PHYS_DISK1_PATH
2441 {
2442     U8                              PhysDiskID;         /* 00h */
2443     U8                              PhysDiskBus;        /* 01h */
2444     U16                             Reserved1;          /* 02h */
2445     U64                             WWID;               /* 04h */
2446     U64                             OwnerWWID;          /* 0Ch */
2447     U8                              OwnerIdentifier;    /* 14h */
2448     U8                              Reserved2;          /* 15h */
2449     U16                             Flags;              /* 16h */
2450 } RAID_PHYS_DISK1_PATH, MPI_POINTER PTR_RAID_PHYS_DISK1_PATH,
2451   RaidPhysDisk1Path_t, MPI_POINTER pRaidPhysDisk1Path_t;
2452 
2453 /* RAID Physical Disk Page 1 Flags field defines */
2454 #define MPI_RAID_PHYSDISK1_FLAG_BROKEN          (0x0002)
2455 #define MPI_RAID_PHYSDISK1_FLAG_INVALID         (0x0001)
2456 
2457 
2458 /*
2459  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2460  * one and check Header.PageLength or NumPhysDiskPaths at runtime.
2461  */
2462 #ifndef MPI_RAID_PHYS_DISK1_PATH_MAX
2463 #define MPI_RAID_PHYS_DISK1_PATH_MAX    (1)
2464 #endif
2465 
2466 typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_1
2467 {
2468     CONFIG_PAGE_HEADER              Header;             /* 00h */
2469     U8                              NumPhysDiskPaths;   /* 04h */
2470     U8                              PhysDiskNum;        /* 05h */
2471     U16                             Reserved2;          /* 06h */
2472     U32                             Reserved1;          /* 08h */
2473     RAID_PHYS_DISK1_PATH            Path[MPI_RAID_PHYS_DISK1_PATH_MAX];/* 0Ch */
2474 } CONFIG_PAGE_RAID_PHYS_DISK_1, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_1,
2475   RaidPhysDiskPage1_t, MPI_POINTER pRaidPhysDiskPage1_t;
2476 
2477 #define MPI_RAIDPHYSDISKPAGE1_PAGEVERSION       (0x00)
2478 
2479 
2480 /****************************************************************************
2481 *   LAN Config Pages
2482 ****************************************************************************/
2483 
2484 typedef struct _CONFIG_PAGE_LAN_0
2485 {
2486     ConfigPageHeader_t      Header;                     /* 00h */
2487     U16                     TxRxModes;                  /* 04h */
2488     U16                     Reserved;                   /* 06h */
2489     U32                     PacketPrePad;               /* 08h */
2490 } CONFIG_PAGE_LAN_0, MPI_POINTER PTR_CONFIG_PAGE_LAN_0,
2491   LANPage0_t, MPI_POINTER pLANPage0_t;
2492 
2493 #define MPI_LAN_PAGE0_PAGEVERSION                       (0x01)
2494 
2495 #define MPI_LAN_PAGE0_RETURN_LOOPBACK                   (0x0000)
2496 #define MPI_LAN_PAGE0_SUPPRESS_LOOPBACK                 (0x0001)
2497 #define MPI_LAN_PAGE0_LOOPBACK_MASK                     (0x0001)
2498 
2499 typedef struct _CONFIG_PAGE_LAN_1
2500 {
2501     ConfigPageHeader_t      Header;                     /* 00h */
2502     U16                     Reserved;                   /* 04h */
2503     U8                      CurrentDeviceState;         /* 06h */
2504     U8                      Reserved1;                  /* 07h */
2505     U32                     MinPacketSize;              /* 08h */
2506     U32                     MaxPacketSize;              /* 0Ch */
2507     U32                     HardwareAddressLow;         /* 10h */
2508     U32                     HardwareAddressHigh;        /* 14h */
2509     U32                     MaxWireSpeedLow;            /* 18h */
2510     U32                     MaxWireSpeedHigh;           /* 1Ch */
2511     U32                     BucketsRemaining;           /* 20h */
2512     U32                     MaxReplySize;               /* 24h */
2513     U32                     NegWireSpeedLow;            /* 28h */
2514     U32                     NegWireSpeedHigh;           /* 2Ch */
2515 } CONFIG_PAGE_LAN_1, MPI_POINTER PTR_CONFIG_PAGE_LAN_1,
2516   LANPage1_t, MPI_POINTER pLANPage1_t;
2517 
2518 #define MPI_LAN_PAGE1_PAGEVERSION                       (0x03)
2519 
2520 #define MPI_LAN_PAGE1_DEV_STATE_RESET                   (0x00)
2521 #define MPI_LAN_PAGE1_DEV_STATE_OPERATIONAL             (0x01)
2522 
2523 
2524 /****************************************************************************
2525 *   Inband Config Pages
2526 ****************************************************************************/
2527 
2528 typedef struct _CONFIG_PAGE_INBAND_0
2529 {
2530     CONFIG_PAGE_HEADER      Header;                     /* 00h */
2531     MPI_VERSION_FORMAT      InbandVersion;              /* 04h */
2532     U16                     MaximumBuffers;             /* 08h */
2533     U16                     Reserved1;                  /* 0Ah */
2534 } CONFIG_PAGE_INBAND_0, MPI_POINTER PTR_CONFIG_PAGE_INBAND_0,
2535   InbandPage0_t, MPI_POINTER pInbandPage0_t;
2536 
2537 #define MPI_INBAND_PAGEVERSION          (0x00)
2538 
2539 
2540 
2541 /****************************************************************************
2542 *   SAS IO Unit Config Pages
2543 ****************************************************************************/
2544 
2545 typedef struct _MPI_SAS_IO_UNIT0_PHY_DATA
2546 {
2547     U8          Port;                   /* 00h */
2548     U8          PortFlags;              /* 01h */
2549     U8          PhyFlags;               /* 02h */
2550     U8          NegotiatedLinkRate;     /* 03h */
2551     U32         ControllerPhyDeviceInfo;/* 04h */
2552     U16         AttachedDeviceHandle;   /* 08h */
2553     U16         ControllerDevHandle;    /* 0Ah */
2554     U32         DiscoveryStatus;        /* 0Ch */
2555 } MPI_SAS_IO_UNIT0_PHY_DATA, MPI_POINTER PTR_MPI_SAS_IO_UNIT0_PHY_DATA,
2556   SasIOUnit0PhyData, MPI_POINTER pSasIOUnit0PhyData;
2557 
2558 /*
2559  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2560  * one and check Header.PageLength at runtime.
2561  */
2562 #ifndef MPI_SAS_IOUNIT0_PHY_MAX
2563 #define MPI_SAS_IOUNIT0_PHY_MAX         (1)
2564 #endif
2565 
2566 typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0
2567 {
2568     CONFIG_EXTENDED_PAGE_HEADER     Header;                             /* 00h */
2569     U16                             NvdataVersionDefault;               /* 08h */
2570     U16                             NvdataVersionPersistent;            /* 0Ah */
2571     U8                              NumPhys;                            /* 0Ch */
2572     U8                              Reserved2;                          /* 0Dh */
2573     U16                             Reserved3;                          /* 0Eh */
2574     MPI_SAS_IO_UNIT0_PHY_DATA       PhyData[MPI_SAS_IOUNIT0_PHY_MAX];   /* 10h */
2575 } CONFIG_PAGE_SAS_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_0,
2576   SasIOUnitPage0_t, MPI_POINTER pSasIOUnitPage0_t;
2577 
2578 #define MPI_SASIOUNITPAGE0_PAGEVERSION      (0x04)
2579 
2580 /* values for SAS IO Unit Page 0 PortFlags */
2581 #define MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS    (0x08)
2582 #define MPI_SAS_IOUNIT0_PORT_FLAGS_0_TARGET_IOC_NUM         (0x00)
2583 #define MPI_SAS_IOUNIT0_PORT_FLAGS_1_TARGET_IOC_NUM         (0x04)
2584 #define MPI_SAS_IOUNIT0_PORT_FLAGS_AUTO_PORT_CONFIG         (0x01)
2585 
2586 /* values for SAS IO Unit Page 0 PhyFlags */
2587 #define MPI_SAS_IOUNIT0_PHY_FLAGS_PHY_DISABLED              (0x04)
2588 #define MPI_SAS_IOUNIT0_PHY_FLAGS_TX_INVERT                 (0x02)
2589 #define MPI_SAS_IOUNIT0_PHY_FLAGS_RX_INVERT                 (0x01)
2590 
2591 /* values for SAS IO Unit Page 0 NegotiatedLinkRate */
2592 #define MPI_SAS_IOUNIT0_RATE_UNKNOWN                        (0x00)
2593 #define MPI_SAS_IOUNIT0_RATE_PHY_DISABLED                   (0x01)
2594 #define MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION       (0x02)
2595 #define MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE              (0x03)
2596 #define MPI_SAS_IOUNIT0_RATE_1_5                            (0x08)
2597 #define MPI_SAS_IOUNIT0_RATE_3_0                            (0x09)
2598 #define MPI_SAS_IOUNIT0_RATE_6_0                            (0x0A)
2599 
2600 /* see mpi_sas.h for values for SAS IO Unit Page 0 ControllerPhyDeviceInfo values */
2601 
2602 /* values for SAS IO Unit Page 0 DiscoveryStatus */
2603 #define MPI_SAS_IOUNIT0_DS_LOOP_DETECTED                    (0x00000001)
2604 #define MPI_SAS_IOUNIT0_DS_UNADDRESSABLE_DEVICE             (0x00000002)
2605 #define MPI_SAS_IOUNIT0_DS_MULTIPLE_PORTS                   (0x00000004)
2606 #define MPI_SAS_IOUNIT0_DS_EXPANDER_ERR                     (0x00000008)
2607 #define MPI_SAS_IOUNIT0_DS_SMP_TIMEOUT                      (0x00000010)
2608 #define MPI_SAS_IOUNIT0_DS_OUT_ROUTE_ENTRIES                (0x00000020)
2609 #define MPI_SAS_IOUNIT0_DS_INDEX_NOT_EXIST                  (0x00000040)
2610 #define MPI_SAS_IOUNIT0_DS_SMP_FUNCTION_FAILED              (0x00000080)
2611 #define MPI_SAS_IOUNIT0_DS_SMP_CRC_ERROR                    (0x00000100)
2612 #define MPI_SAS_IOUNIT0_DS_SUBTRACTIVE_LINK                 (0x00000200)
2613 #define MPI_SAS_IOUNIT0_DS_TABLE_LINK                       (0x00000400)
2614 #define MPI_SAS_IOUNIT0_DS_UNSUPPORTED_DEVICE               (0x00000800)
2615 #define MPI_SAS_IOUNIT0_DS_MAX_SATA_TARGETS                 (0x00001000)
2616 #define MPI_SAS_IOUNIT0_DS_MULTI_PORT_DOMAIN                (0x00002000)
2617 
2618 
2619 typedef struct _MPI_SAS_IO_UNIT1_PHY_DATA
2620 {
2621     U8          Port;                       /* 00h */
2622     U8          PortFlags;                  /* 01h */
2623     U8          PhyFlags;                   /* 02h */
2624     U8          MaxMinLinkRate;             /* 03h */
2625     U32         ControllerPhyDeviceInfo;    /* 04h */
2626     U16         MaxTargetPortConnectTime;   /* 08h */
2627     U16         Reserved1;                  /* 0Ah */
2628 } MPI_SAS_IO_UNIT1_PHY_DATA, MPI_POINTER PTR_MPI_SAS_IO_UNIT1_PHY_DATA,
2629   SasIOUnit1PhyData, MPI_POINTER pSasIOUnit1PhyData;
2630 
2631 /*
2632  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2633  * one and check Header.PageLength at runtime.
2634  */
2635 #ifndef MPI_SAS_IOUNIT1_PHY_MAX
2636 #define MPI_SAS_IOUNIT1_PHY_MAX         (1)
2637 #endif
2638 
2639 typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1
2640 {
2641     CONFIG_EXTENDED_PAGE_HEADER Header;                             /* 00h */
2642     U16                         ControlFlags;                       /* 08h */
2643     U16                         MaxNumSATATargets;                  /* 0Ah */
2644     U16                         AdditionalControlFlags;             /* 0Ch */
2645     U16                         Reserved1;                          /* 0Eh */
2646     U8                          NumPhys;                            /* 10h */
2647     U8                          SATAMaxQDepth;                      /* 11h */
2648     U8                          ReportDeviceMissingDelay;           /* 12h */
2649     U8                          IODeviceMissingDelay;               /* 13h */
2650     MPI_SAS_IO_UNIT1_PHY_DATA   PhyData[MPI_SAS_IOUNIT1_PHY_MAX];   /* 14h */
2651 } CONFIG_PAGE_SAS_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_1,
2652   SasIOUnitPage1_t, MPI_POINTER pSasIOUnitPage1_t;
2653 
2654 #define MPI_SASIOUNITPAGE1_PAGEVERSION      (0x07)
2655 
2656 /* values for SAS IO Unit Page 1 ControlFlags */
2657 #define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST            (0x8000)
2658 #define MPI_SAS_IOUNIT1_CONTROL_SATA_3_0_MAX                (0x4000)
2659 #define MPI_SAS_IOUNIT1_CONTROL_SATA_1_5_MAX                (0x2000)
2660 #define MPI_SAS_IOUNIT1_CONTROL_SATA_SW_PRESERVE            (0x1000)
2661 #define MPI_SAS_IOUNIT1_CONTROL_DISABLE_SAS_HASH            (0x0800)
2662 
2663 #define MPI_SAS_IOUNIT1_CONTROL_MASK_DEV_SUPPORT            (0x0600)
2664 #define MPI_SAS_IOUNIT1_CONTROL_SHIFT_DEV_SUPPORT           (9)
2665 #define MPI_SAS_IOUNIT1_CONTROL_DEV_SUPPORT_BOTH            (0x00)
2666 #define MPI_SAS_IOUNIT1_CONTROL_DEV_SAS_SUPPORT             (0x01)
2667 #define MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT            (0x02)
2668 
2669 #define MPI_SAS_IOUNIT1_CONTROL_POSTPONE_SATA_INIT          (0x0100)
2670 #define MPI_SAS_IOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED     (0x0080)
2671 #define MPI_SAS_IOUNIT1_CONTROL_SATA_SMART_REQUIRED         (0x0040)
2672 #define MPI_SAS_IOUNIT1_CONTROL_SATA_NCQ_REQUIRED           (0x0020)
2673 #define MPI_SAS_IOUNIT1_CONTROL_SATA_FUA_REQUIRED           (0x0010)
2674 #define MPI_SAS_IOUNIT1_CONTROL_PHY_ENABLE_ORDER_HIGH       (0x0008)
2675 #define MPI_SAS_IOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL         (0x0004)
2676 #define MPI_SAS_IOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY         (0x0002)
2677 #define MPI_SAS_IOUNIT1_CONTROL_CLEAR_AFFILIATION           (0x0001)
2678 
2679 /* values for SAS IO Unit Page 1 AdditionalControlFlags */
2680 #define MPI_SAS_IOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL          (0x0080)
2681 #define MPI_SAS_IOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION    (0x0040)
2682 #define MPI_SAS_IOUNIT1_ACONTROL_HIDE_NONZERO_ATTACHED_PHY_IDENT    (0x0020)
2683 #define MPI_SAS_IOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET   (0x0010)
2684 #define MPI_SAS_IOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET  (0x0008)
2685 #define MPI_SAS_IOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET   (0x0004)
2686 #define MPI_SAS_IOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET     (0x0002)
2687 #define MPI_SAS_IOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE               (0x0001)
2688 
2689 /* defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */
2690 #define MPI_SAS_IOUNIT1_REPORT_MISSING_TIMEOUT_MASK         (0x7F)
2691 #define MPI_SAS_IOUNIT1_REPORT_MISSING_UNIT_16              (0x80)
2692 
2693 /* values for SAS IO Unit Page 1 PortFlags */
2694 #define MPI_SAS_IOUNIT1_PORT_FLAGS_0_TARGET_IOC_NUM         (0x00)
2695 #define MPI_SAS_IOUNIT1_PORT_FLAGS_1_TARGET_IOC_NUM         (0x04)
2696 #define MPI_SAS_IOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG         (0x01)
2697 
2698 /* values for SAS IO Unit Page 0 PhyFlags */
2699 #define MPI_SAS_IOUNIT1_PHY_FLAGS_PHY_DISABLE               (0x04)
2700 #define MPI_SAS_IOUNIT1_PHY_FLAGS_TX_INVERT                 (0x02)
2701 #define MPI_SAS_IOUNIT1_PHY_FLAGS_RX_INVERT                 (0x01)
2702 
2703 /* values for SAS IO Unit Page 0 MaxMinLinkRate */
2704 #define MPI_SAS_IOUNIT1_MAX_RATE_MASK                       (0xF0)
2705 #define MPI_SAS_IOUNIT1_MAX_RATE_1_5                        (0x80)
2706 #define MPI_SAS_IOUNIT1_MAX_RATE_3_0                        (0x90)
2707 #define MPI_SAS_IOUNIT1_MIN_RATE_MASK                       (0x0F)
2708 #define MPI_SAS_IOUNIT1_MIN_RATE_1_5                        (0x08)
2709 #define MPI_SAS_IOUNIT1_MIN_RATE_3_0                        (0x09)
2710 
2711 /* see mpi_sas.h for values for SAS IO Unit Page 1 ControllerPhyDeviceInfo values */
2712 
2713 
2714 typedef struct _CONFIG_PAGE_SAS_IO_UNIT_2
2715 {
2716     CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
2717     U8                                  NumDevsPerEnclosure;    /* 08h */
2718     U8                                  Reserved1;              /* 09h */
2719     U16                                 Reserved2;              /* 0Ah */
2720     U16                                 MaxPersistentIDs;       /* 0Ch */
2721     U16                                 NumPersistentIDsUsed;   /* 0Eh */
2722     U8                                  Status;                 /* 10h */
2723     U8                                  Flags;                  /* 11h */
2724     U16                                 MaxNumPhysicalMappedIDs;/* 12h */
2725 } CONFIG_PAGE_SAS_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_2,
2726   SasIOUnitPage2_t, MPI_POINTER pSasIOUnitPage2_t;
2727 
2728 #define MPI_SASIOUNITPAGE2_PAGEVERSION      (0x06)
2729 
2730 /* values for SAS IO Unit Page 2 Status field */
2731 #define MPI_SAS_IOUNIT2_STATUS_DEVICE_LIMIT_EXCEEDED        (0x08)
2732 #define MPI_SAS_IOUNIT2_STATUS_ENCLOSURE_DEVICES_UNMAPPED   (0x04)
2733 #define MPI_SAS_IOUNIT2_STATUS_DISABLED_PERSISTENT_MAPPINGS (0x02)
2734 #define MPI_SAS_IOUNIT2_STATUS_FULL_PERSISTENT_MAPPINGS     (0x01)
2735 
2736 /* values for SAS IO Unit Page 2 Flags field */
2737 #define MPI_SAS_IOUNIT2_FLAGS_DISABLE_PERSISTENT_MAPPINGS   (0x01)
2738 /* Physical Mapping Modes */
2739 #define MPI_SAS_IOUNIT2_FLAGS_MASK_PHYS_MAP_MODE            (0x0E)
2740 #define MPI_SAS_IOUNIT2_FLAGS_SHIFT_PHYS_MAP_MODE           (1)
2741 #define MPI_SAS_IOUNIT2_FLAGS_NO_PHYS_MAP                   (0x00)
2742 #define MPI_SAS_IOUNIT2_FLAGS_DIRECT_ATTACH_PHYS_MAP        (0x01)
2743 #define MPI_SAS_IOUNIT2_FLAGS_ENCLOSURE_SLOT_PHYS_MAP       (0x02)
2744 #define MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP        (0x07)
2745 
2746 #define MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT         (0x10)
2747 #define MPI_SAS_IOUNIT2_FLAGS_DA_STARTING_SLOT              (0x20)
2748 
2749 
2750 typedef struct _CONFIG_PAGE_SAS_IO_UNIT_3
2751 {
2752     CONFIG_EXTENDED_PAGE_HEADER Header;                         /* 00h */
2753     U32                         Reserved1;                      /* 08h */
2754     U32                         MaxInvalidDwordCount;           /* 0Ch */
2755     U32                         InvalidDwordCountTime;          /* 10h */
2756     U32                         MaxRunningDisparityErrorCount;  /* 14h */
2757     U32                         RunningDisparityErrorTime;      /* 18h */
2758     U32                         MaxLossDwordSynchCount;         /* 1Ch */
2759     U32                         LossDwordSynchCountTime;        /* 20h */
2760     U32                         MaxPhyResetProblemCount;        /* 24h */
2761     U32                         PhyResetProblemTime;            /* 28h */
2762 } CONFIG_PAGE_SAS_IO_UNIT_3, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_3,
2763   SasIOUnitPage3_t, MPI_POINTER pSasIOUnitPage3_t;
2764 
2765 #define MPI_SASIOUNITPAGE3_PAGEVERSION      (0x00)
2766 
2767 
2768 /****************************************************************************
2769 *   SAS Expander Config Pages
2770 ****************************************************************************/
2771 
2772 typedef struct _CONFIG_PAGE_SAS_EXPANDER_0
2773 {
2774     CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
2775     U8                                  PhysicalPort;           /* 08h */
2776     U8                                  Reserved1;              /* 09h */
2777     U16                                 EnclosureHandle;        /* 0Ah */
2778     U64                                 SASAddress;             /* 0Ch */
2779     U32                                 DiscoveryStatus;        /* 14h */
2780     U16                                 DevHandle;              /* 18h */
2781     U16                                 ParentDevHandle;        /* 1Ah */
2782     U16                                 ExpanderChangeCount;    /* 1Ch */
2783     U16                                 ExpanderRouteIndexes;   /* 1Eh */
2784     U8                                  NumPhys;                /* 20h */
2785     U8                                  SASLevel;               /* 21h */
2786     U8                                  Flags;                  /* 22h */
2787     U8                                  Reserved3;              /* 23h */
2788 } CONFIG_PAGE_SAS_EXPANDER_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_EXPANDER_0,
2789   SasExpanderPage0_t, MPI_POINTER pSasExpanderPage0_t;
2790 
2791 #define MPI_SASEXPANDER0_PAGEVERSION        (0x03)
2792 
2793 /* values for SAS Expander Page 0 DiscoveryStatus field */
2794 #define MPI_SAS_EXPANDER0_DS_LOOP_DETECTED              (0x00000001)
2795 #define MPI_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE       (0x00000002)
2796 #define MPI_SAS_EXPANDER0_DS_MULTIPLE_PORTS             (0x00000004)
2797 #define MPI_SAS_EXPANDER0_DS_EXPANDER_ERR               (0x00000008)
2798 #define MPI_SAS_EXPANDER0_DS_SMP_TIMEOUT                (0x00000010)
2799 #define MPI_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES          (0x00000020)
2800 #define MPI_SAS_EXPANDER0_DS_INDEX_NOT_EXIST            (0x00000040)
2801 #define MPI_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED        (0x00000080)
2802 #define MPI_SAS_EXPANDER0_DS_SMP_CRC_ERROR              (0x00000100)
2803 #define MPI_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK           (0x00000200)
2804 #define MPI_SAS_EXPANDER0_DS_TABLE_LINK                 (0x00000400)
2805 #define MPI_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE         (0x00000800)
2806 
2807 /* values for SAS Expander Page 0 Flags field */
2808 #define MPI_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE    (0x04)
2809 #define MPI_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG      (0x02)
2810 #define MPI_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS      (0x01)
2811 
2812 
2813 typedef struct _CONFIG_PAGE_SAS_EXPANDER_1
2814 {
2815     CONFIG_EXTENDED_PAGE_HEADER Header;                 /* 00h */
2816     U8                          PhysicalPort;           /* 08h */
2817     U8                          Reserved1;              /* 09h */
2818     U16                         Reserved2;              /* 0Ah */
2819     U8                          NumPhys;                /* 0Ch */
2820     U8                          Phy;                    /* 0Dh */
2821     U16                         NumTableEntriesProgrammed; /* 0Eh */
2822     U8                          ProgrammedLinkRate;     /* 10h */
2823     U8                          HwLinkRate;             /* 11h */
2824     U16                         AttachedDevHandle;      /* 12h */
2825     U32                         PhyInfo;                /* 14h */
2826     U32                         AttachedDeviceInfo;     /* 18h */
2827     U16                         OwnerDevHandle;         /* 1Ch */
2828     U8                          ChangeCount;            /* 1Eh */
2829     U8                          NegotiatedLinkRate;     /* 1Fh */
2830     U8                          PhyIdentifier;          /* 20h */
2831     U8                          AttachedPhyIdentifier;  /* 21h */
2832     U8                          Reserved3;              /* 22h */
2833     U8                          DiscoveryInfo;          /* 23h */
2834     U32                         Reserved4;              /* 24h */
2835 } CONFIG_PAGE_SAS_EXPANDER_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_EXPANDER_1,
2836   SasExpanderPage1_t, MPI_POINTER pSasExpanderPage1_t;
2837 
2838 #define MPI_SASEXPANDER1_PAGEVERSION        (0x01)
2839 
2840 /* use MPI_SAS_PHY0_PRATE_ defines for ProgrammedLinkRate */
2841 
2842 /* use MPI_SAS_PHY0_HWRATE_ defines for HwLinkRate */
2843 
2844 /* use MPI_SAS_PHY0_PHYINFO_ defines for PhyInfo */
2845 
2846 /* see mpi_sas.h for values for SAS Expander Page 1 AttachedDeviceInfo values */
2847 
2848 /* values for SAS Expander Page 1 DiscoveryInfo field */
2849 #define MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED     (0x04)
2850 #define MPI_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE   (0x02)
2851 #define MPI_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES   (0x01)
2852 
2853 /* values for SAS Expander Page 1 NegotiatedLinkRate field */
2854 #define MPI_SAS_EXPANDER1_NEG_RATE_UNKNOWN              (0x00)
2855 #define MPI_SAS_EXPANDER1_NEG_RATE_PHY_DISABLED         (0x01)
2856 #define MPI_SAS_EXPANDER1_NEG_RATE_FAILED_NEGOTIATION   (0x02)
2857 #define MPI_SAS_EXPANDER1_NEG_RATE_SATA_OOB_COMPLETE    (0x03)
2858 #define MPI_SAS_EXPANDER1_NEG_RATE_1_5                  (0x08)
2859 #define MPI_SAS_EXPANDER1_NEG_RATE_3_0                  (0x09)
2860 
2861 
2862 /****************************************************************************
2863 *   SAS Device Config Pages
2864 ****************************************************************************/
2865 
2866 typedef struct _CONFIG_PAGE_SAS_DEVICE_0
2867 {
2868     CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
2869     U16                                 Slot;                   /* 08h */
2870     U16                                 EnclosureHandle;        /* 0Ah */
2871     U64                                 SASAddress;             /* 0Ch */
2872     U16                                 ParentDevHandle;        /* 14h */
2873     U8                                  PhyNum;                 /* 16h */
2874     U8                                  AccessStatus;           /* 17h */
2875     U16                                 DevHandle;              /* 18h */
2876     U8                                  TargetID;               /* 1Ah */
2877     U8                                  Bus;                    /* 1Bh */
2878     U32                                 DeviceInfo;             /* 1Ch */
2879     U16                                 Flags;                  /* 20h */
2880     U8                                  PhysicalPort;           /* 22h */
2881     U8                                  Reserved2;              /* 23h */
2882 } CONFIG_PAGE_SAS_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_0,
2883   SasDevicePage0_t, MPI_POINTER pSasDevicePage0_t;
2884 
2885 #define MPI_SASDEVICE0_PAGEVERSION          (0x05)
2886 
2887 /* values for SAS Device Page 0 AccessStatus field */
2888 #define MPI_SAS_DEVICE0_ASTATUS_NO_ERRORS                   (0x00)
2889 #define MPI_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED            (0x01)
2890 #define MPI_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED      (0x02)
2891 #define MPI_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT   (0x03)
2892 #define MPI_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION   (0x04)
2893 /* specific values for SATA Init failures */
2894 #define MPI_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN                 (0x10)
2895 #define MPI_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT    (0x11)
2896 #define MPI_SAS_DEVICE0_ASTATUS_SIF_DIAG                    (0x12)
2897 #define MPI_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION          (0x13)
2898 #define MPI_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER             (0x14)
2899 #define MPI_SAS_DEVICE0_ASTATUS_SIF_PIO_SN                  (0x15)
2900 #define MPI_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN                 (0x16)
2901 #define MPI_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN                 (0x17)
2902 #define MPI_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION        (0x18)
2903 #define MPI_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE         (0x19)
2904 #define MPI_SAS_DEVICE0_ASTATUS_SIF_MAX                     (0x1F)
2905 
2906 /* values for SAS Device Page 0 Flags field */
2907 #define MPI_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY      (0x0400)
2908 #define MPI_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE              (0x0200)
2909 #define MPI_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE            (0x0100)
2910 #define MPI_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED      (0x0080)
2911 #define MPI_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED          (0x0040)
2912 #define MPI_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED            (0x0020)
2913 #define MPI_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED            (0x0010)
2914 #define MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH          (0x0008)
2915 #define MPI_SAS_DEVICE0_FLAGS_MAPPING_PERSISTENT            (0x0004)
2916 #define MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED                 (0x0002)
2917 #define MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT                (0x0001)
2918 
2919 /* see mpi_sas.h for values for SAS Device Page 0 DeviceInfo values */
2920 
2921 
2922 typedef struct _CONFIG_PAGE_SAS_DEVICE_1
2923 {
2924     CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
2925     U32                                 Reserved1;              /* 08h */
2926     U64                                 SASAddress;             /* 0Ch */
2927     U32                                 Reserved2;              /* 14h */
2928     U16                                 DevHandle;              /* 18h */
2929     U8                                  TargetID;               /* 1Ah */
2930     U8                                  Bus;                    /* 1Bh */
2931     U8                                  InitialRegDeviceFIS[20];/* 1Ch */
2932 } CONFIG_PAGE_SAS_DEVICE_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_1,
2933   SasDevicePage1_t, MPI_POINTER pSasDevicePage1_t;
2934 
2935 #define MPI_SASDEVICE1_PAGEVERSION          (0x00)
2936 
2937 
2938 typedef struct _CONFIG_PAGE_SAS_DEVICE_2
2939 {
2940     CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
2941     U64                                 PhysicalIdentifier;     /* 08h */
2942     U32                                 EnclosureMapping;       /* 10h */
2943 } CONFIG_PAGE_SAS_DEVICE_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_2,
2944   SasDevicePage2_t, MPI_POINTER pSasDevicePage2_t;
2945 
2946 #define MPI_SASDEVICE2_PAGEVERSION          (0x01)
2947 
2948 /* defines for SAS Device Page 2 EnclosureMapping field */
2949 #define MPI_SASDEVICE2_ENC_MAP_MASK_MISSING_COUNT       (0x0000000F)
2950 #define MPI_SASDEVICE2_ENC_MAP_SHIFT_MISSING_COUNT      (0)
2951 #define MPI_SASDEVICE2_ENC_MAP_MASK_NUM_SLOTS           (0x000007F0)
2952 #define MPI_SASDEVICE2_ENC_MAP_SHIFT_NUM_SLOTS          (4)
2953 #define MPI_SASDEVICE2_ENC_MAP_MASK_START_INDEX         (0x001FF800)
2954 #define MPI_SASDEVICE2_ENC_MAP_SHIFT_START_INDEX        (11)
2955 
2956 
2957 /****************************************************************************
2958 *   SAS PHY Config Pages
2959 ****************************************************************************/
2960 
2961 typedef struct _CONFIG_PAGE_SAS_PHY_0
2962 {
2963     CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
2964     U16                                 OwnerDevHandle;         /* 08h */
2965     U16                                 Reserved1;              /* 0Ah */
2966     U64                                 SASAddress;             /* 0Ch */
2967     U16                                 AttachedDevHandle;      /* 14h */
2968     U8                                  AttachedPhyIdentifier;  /* 16h */
2969     U8                                  Reserved2;              /* 17h */
2970     U32                                 AttachedDeviceInfo;     /* 18h */
2971     U8                                  ProgrammedLinkRate;     /* 1Ch */
2972     U8                                  HwLinkRate;             /* 1Dh */
2973     U8                                  ChangeCount;            /* 1Eh */
2974     U8                                  Flags;                  /* 1Fh */
2975     U32                                 PhyInfo;                /* 20h */
2976 } CONFIG_PAGE_SAS_PHY_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_PHY_0,
2977   SasPhyPage0_t, MPI_POINTER pSasPhyPage0_t;
2978 
2979 #define MPI_SASPHY0_PAGEVERSION             (0x01)
2980 
2981 /* values for SAS PHY Page 0 ProgrammedLinkRate field */
2982 #define MPI_SAS_PHY0_PRATE_MAX_RATE_MASK                        (0xF0)
2983 #define MPI_SAS_PHY0_PRATE_MAX_RATE_NOT_PROGRAMMABLE            (0x00)
2984 #define MPI_SAS_PHY0_PRATE_MAX_RATE_1_5                         (0x80)
2985 #define MPI_SAS_PHY0_PRATE_MAX_RATE_3_0                         (0x90)
2986 #define MPI_SAS_PHY0_PRATE_MIN_RATE_MASK                        (0x0F)
2987 #define MPI_SAS_PHY0_PRATE_MIN_RATE_NOT_PROGRAMMABLE            (0x00)
2988 #define MPI_SAS_PHY0_PRATE_MIN_RATE_1_5                         (0x08)
2989 #define MPI_SAS_PHY0_PRATE_MIN_RATE_3_0                         (0x09)
2990 
2991 /* values for SAS PHY Page 0 HwLinkRate field */
2992 #define MPI_SAS_PHY0_HWRATE_MAX_RATE_MASK                       (0xF0)
2993 #define MPI_SAS_PHY0_HWRATE_MAX_RATE_1_5                        (0x80)
2994 #define MPI_SAS_PHY0_HWRATE_MAX_RATE_3_0                        (0x90)
2995 #define MPI_SAS_PHY0_HWRATE_MIN_RATE_MASK                       (0x0F)
2996 #define MPI_SAS_PHY0_HWRATE_MIN_RATE_1_5                        (0x08)
2997 #define MPI_SAS_PHY0_HWRATE_MIN_RATE_3_0                        (0x09)
2998 
2999 /* values for SAS PHY Page 0 Flags field */
3000 #define MPI_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC              (0x01)
3001 
3002 /* values for SAS PHY Page 0 PhyInfo field */
3003 #define MPI_SAS_PHY0_PHYINFO_SATA_PORT_ACTIVE                   (0x00004000)
3004 #define MPI_SAS_PHY0_PHYINFO_SATA_PORT_SELECTOR                 (0x00002000)
3005 #define MPI_SAS_PHY0_PHYINFO_VIRTUAL_PHY                        (0x00001000)
3006 
3007 #define MPI_SAS_PHY0_PHYINFO_MASK_PARTIAL_PATHWAY_TIME          (0x00000F00)
3008 #define MPI_SAS_PHY0_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME         (8)
3009 
3010 #define MPI_SAS_PHY0_PHYINFO_MASK_ROUTING_ATTRIBUTE             (0x000000F0)
3011 #define MPI_SAS_PHY0_PHYINFO_DIRECT_ROUTING                     (0x00000000)
3012 #define MPI_SAS_PHY0_PHYINFO_SUBTRACTIVE_ROUTING                (0x00000010)
3013 #define MPI_SAS_PHY0_PHYINFO_TABLE_ROUTING                      (0x00000020)
3014 
3015 #define MPI_SAS_PHY0_PHYINFO_MASK_LINK_RATE                     (0x0000000F)
3016 #define MPI_SAS_PHY0_PHYINFO_UNKNOWN_LINK_RATE                  (0x00000000)
3017 #define MPI_SAS_PHY0_PHYINFO_PHY_DISABLED                       (0x00000001)
3018 #define MPI_SAS_PHY0_PHYINFO_NEGOTIATION_FAILED                 (0x00000002)
3019 #define MPI_SAS_PHY0_PHYINFO_SATA_OOB_COMPLETE                  (0x00000003)
3020 #define MPI_SAS_PHY0_PHYINFO_RATE_1_5                           (0x00000008)
3021 #define MPI_SAS_PHY0_PHYINFO_RATE_3_0                           (0x00000009)
3022 
3023 
3024 typedef struct _CONFIG_PAGE_SAS_PHY_1
3025 {
3026     CONFIG_EXTENDED_PAGE_HEADER Header;                     /* 00h */
3027     U32                         Reserved1;                  /* 08h */
3028     U32                         InvalidDwordCount;          /* 0Ch */
3029     U32                         RunningDisparityErrorCount; /* 10h */
3030     U32                         LossDwordSynchCount;        /* 14h */
3031     U32                         PhyResetProblemCount;       /* 18h */
3032 } CONFIG_PAGE_SAS_PHY_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_PHY_1,
3033   SasPhyPage1_t, MPI_POINTER pSasPhyPage1_t;
3034 
3035 #define MPI_SASPHY1_PAGEVERSION             (0x00)
3036 
3037 
3038 /****************************************************************************
3039 *   SAS Enclosure Config Pages
3040 ****************************************************************************/
3041 
3042 typedef struct _CONFIG_PAGE_SAS_ENCLOSURE_0
3043 {
3044     CONFIG_EXTENDED_PAGE_HEADER         Header;                 /* 00h */
3045     U32                                 Reserved1;              /* 08h */
3046     U64                                 EnclosureLogicalID;     /* 0Ch */
3047     U16                                 Flags;                  /* 14h */
3048     U16                                 EnclosureHandle;        /* 16h */
3049     U16                                 NumSlots;               /* 18h */
3050     U16                                 StartSlot;              /* 1Ah */
3051     U8                                  StartTargetID;          /* 1Ch */
3052     U8                                  StartBus;               /* 1Dh */
3053     U8                                  SEPTargetID;            /* 1Eh */
3054     U8                                  SEPBus;                 /* 1Fh */
3055     U32                                 Reserved2;              /* 20h */
3056     U32                                 Reserved3;              /* 24h */
3057 } CONFIG_PAGE_SAS_ENCLOSURE_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_ENCLOSURE_0,
3058   SasEnclosurePage0_t, MPI_POINTER pSasEnclosurePage0_t;
3059 
3060 #define MPI_SASENCLOSURE0_PAGEVERSION       (0x01)
3061 
3062 /* values for SAS Enclosure Page 0 Flags field */
3063 #define MPI_SAS_ENCLS0_FLAGS_SEP_BUS_ID_VALID       (0x0020)
3064 #define MPI_SAS_ENCLS0_FLAGS_START_BUS_ID_VALID     (0x0010)
3065 
3066 #define MPI_SAS_ENCLS0_FLAGS_MNG_MASK               (0x000F)
3067 #define MPI_SAS_ENCLS0_FLAGS_MNG_UNKNOWN            (0x0000)
3068 #define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_SES            (0x0001)
3069 #define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO          (0x0002)
3070 #define MPI_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO          (0x0003)
3071 #define MPI_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE      (0x0004)
3072 #define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO           (0x0005)
3073 
3074 
3075 /****************************************************************************
3076 *   Log Config Pages
3077 ****************************************************************************/
3078 /*
3079  * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
3080  * one and check NumLogEntries at runtime.
3081  */
3082 #ifndef MPI_LOG_0_NUM_LOG_ENTRIES
3083 #define MPI_LOG_0_NUM_LOG_ENTRIES        (1)
3084 #endif
3085 
3086 #define MPI_LOG_0_LOG_DATA_LENGTH        (0x1C)
3087 
3088 typedef struct _MPI_LOG_0_ENTRY
3089 {
3090     U32         TimeStamp;                          /* 00h */
3091     U32         Reserved1;                          /* 04h */
3092     U16         LogSequence;                        /* 08h */
3093     U16         LogEntryQualifier;                  /* 0Ah */
3094     U8          LogData[MPI_LOG_0_LOG_DATA_LENGTH]; /* 0Ch */
3095 } MPI_LOG_0_ENTRY, MPI_POINTER PTR_MPI_LOG_0_ENTRY,
3096   MpiLog0Entry_t, MPI_POINTER pMpiLog0Entry_t;
3097 
3098 /* values for Log Page 0 LogEntry LogEntryQualifier field */
3099 #define MPI_LOG_0_ENTRY_QUAL_ENTRY_UNUSED           (0x0000)
3100 #define MPI_LOG_0_ENTRY_QUAL_POWER_ON_RESET         (0x0001)
3101 
3102 typedef struct _CONFIG_PAGE_LOG_0
3103 {
3104     CONFIG_EXTENDED_PAGE_HEADER Header;                     /* 00h */
3105     U32                         Reserved1;                  /* 08h */
3106     U32                         Reserved2;                  /* 0Ch */
3107     U16                         NumLogEntries;              /* 10h */
3108     U16                         Reserved3;                  /* 12h */
3109     MPI_LOG_0_ENTRY             LogEntry[MPI_LOG_0_NUM_LOG_ENTRIES]; /* 14h */
3110 } CONFIG_PAGE_LOG_0, MPI_POINTER PTR_CONFIG_PAGE_LOG_0,
3111   LogPage0_t, MPI_POINTER pLogPage0_t;
3112 
3113 #define MPI_LOG_0_PAGEVERSION               (0x01)
3114 
3115 
3116 #endif
3117
/* [<][>][^][v][top][bottom][index][help] */