drivers/clk/uniphier/clk-uniphier-sys.c

/* [<][>][^][v][top][bottom][index][help] */
   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Copyright (C) 2016 Socionext Inc.
   4  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
   5  */
   6 
   7 #include <linux/stddef.h>
   8 
   9 #include "clk-uniphier.h"
  10 
  11 #define UNIPHIER_LD4_SYS_CLK_SD                                 \
  12         UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 8),               \
  13         UNIPHIER_CLK_FACTOR("sd-133m", -1, "vpll27a", 1, 2)
  14 
  15 #define UNIPHIER_PRO5_SYS_CLK_SD                                        \
  16         UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 12),              \
  17         UNIPHIER_CLK_FACTOR("sd-133m", -1, "spll", 1, 18)
  18 
  19 #define UNIPHIER_LD20_SYS_CLK_SD                                        \
  20         UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 10),              \
  21         UNIPHIER_CLK_FACTOR("sd-133m", -1, "spll", 1, 15)
  22 
  23 #define UNIPHIER_LD4_SYS_CLK_NAND(idx)                                  \
  24         UNIPHIER_CLK_FACTOR("nand-50m", -1, "spll", 1, 32),             \
  25         UNIPHIER_CLK_GATE("nand", (idx), "nand-50m", 0x2104, 2)
  26 
  27 #define UNIPHIER_PRO5_SYS_CLK_NAND(idx)                                 \
  28         UNIPHIER_CLK_FACTOR("nand-50m", -1, "spll", 1, 48),             \
  29         UNIPHIER_CLK_GATE("nand", (idx), "nand-50m", 0x2104, 2)
  30 
  31 #define UNIPHIER_LD11_SYS_CLK_NAND(idx)                                 \
  32         UNIPHIER_CLK_FACTOR("nand-50m", -1, "spll", 1, 40),             \
  33         UNIPHIER_CLK_GATE("nand", (idx), "nand-50m", 0x210c, 0)
  34 
  35 #define UNIPHIER_SYS_CLK_NAND_4X(idx)                                   \
  36         UNIPHIER_CLK_FACTOR("nand-4x", (idx), "nand", 4, 1)
  37 
  38 #define UNIPHIER_LD11_SYS_CLK_EMMC(idx)                                 \
  39         UNIPHIER_CLK_GATE("emmc", (idx), NULL, 0x210c, 2)
  40 
  41 #define UNIPHIER_LD4_SYS_CLK_STDMAC(idx)                                \
  42         UNIPHIER_CLK_GATE("stdmac", (idx), NULL, 0x2104, 10)
  43 
  44 #define UNIPHIER_LD11_SYS_CLK_STDMAC(idx)                               \
  45         UNIPHIER_CLK_GATE("stdmac", (idx), NULL, 0x210c, 8)
  46 
  47 #define UNIPHIER_LD11_SYS_CLK_HSC(idx)                                  \
  48         UNIPHIER_CLK_GATE("hsc", (idx), NULL, 0x210c, 9)
  49 
  50 #define UNIPHIER_PRO4_SYS_CLK_GIO(idx)                                  \
  51         UNIPHIER_CLK_GATE("gio", (idx), NULL, 0x2104, 6)
  52 
  53 #define UNIPHIER_PRO4_SYS_CLK_USB3(idx, ch)                             \
  54         UNIPHIER_CLK_GATE("usb3" #ch, (idx), NULL, 0x2104, 16 + (ch))
  55 
  56 #define UNIPHIER_PRO4_SYS_CLK_AIO(idx)                                  \
  57         UNIPHIER_CLK_FACTOR("aio-io200m", -1, "spll", 1, 8),            \
  58         UNIPHIER_CLK_GATE("aio", (idx), "aio-io200m", 0x2104, 13)
  59 
  60 #define UNIPHIER_PRO5_SYS_CLK_AIO(idx)                                  \
  61         UNIPHIER_CLK_FACTOR("aio-io200m", -1, "spll", 1, 12),           \
  62         UNIPHIER_CLK_GATE("aio", (idx), "aio-io200m", 0x2104, 13)
  63 
  64 #define UNIPHIER_LD11_SYS_CLK_AIO(idx)                                  \
  65         UNIPHIER_CLK_FACTOR("aio-io200m", -1, "spll", 1, 10),           \
  66         UNIPHIER_CLK_GATE("aio", (idx), "aio-io200m", 0x2108, 0)
  67 
  68 #define UNIPHIER_LD11_SYS_CLK_EVEA(idx)                                 \
  69         UNIPHIER_CLK_FACTOR("evea-io100m", -1, "spll", 1, 20),          \
  70         UNIPHIER_CLK_GATE("evea", (idx), "evea-io100m", 0x2108, 1)
  71 
  72 #define UNIPHIER_LD11_SYS_CLK_EXIV(idx)                                 \
  73         UNIPHIER_CLK_FACTOR("exiv-io200m", -1, "spll", 1, 10),          \
  74         UNIPHIER_CLK_GATE("exiv", (idx), "exiv-io200m", 0x2110, 2)
  75 
  76 #define UNIPHIER_PRO4_SYS_CLK_ETHER(idx)                                \
  77         UNIPHIER_CLK_GATE("ether", (idx), NULL, 0x2104, 12)
  78 
  79 #define UNIPHIER_LD11_SYS_CLK_ETHER(idx)                                \
  80         UNIPHIER_CLK_GATE("ether", (idx), NULL, 0x210c, 6)
  81 
  82 const struct uniphier_clk_data uniphier_ld4_sys_clk_data[] = {
  83         UNIPHIER_CLK_FACTOR("spll", -1, "ref", 65, 1),          /* 1597.44 MHz */
  84         UNIPHIER_CLK_FACTOR("upll", -1, "ref", 6000, 512),      /* 288 MHz */
  85         UNIPHIER_CLK_FACTOR("a2pll", -1, "ref", 24, 1),         /* 589.824 MHz */
  86         UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 5625, 512),   /* 270 MHz */
  87         UNIPHIER_CLK_FACTOR("uart", 0, "a2pll", 1, 16),
  88         UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16),
  89         UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 32),
  90         UNIPHIER_LD4_SYS_CLK_NAND(2),
  91         UNIPHIER_SYS_CLK_NAND_4X(3),
  92         UNIPHIER_LD4_SYS_CLK_SD,
  93         UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
  94         UNIPHIER_LD4_SYS_CLK_STDMAC(8),                 /* Ether, HSC, MIO */
  95         { /* sentinel */ }
  96 };
  97 
  98 const struct uniphier_clk_data uniphier_pro4_sys_clk_data[] = {
  99         UNIPHIER_CLK_FACTOR("spll", -1, "ref", 64, 1),          /* 1600 MHz */
 100         UNIPHIER_CLK_FACTOR("upll", -1, "ref", 288, 25),        /* 288 MHz */
 101         UNIPHIER_CLK_FACTOR("a2pll", -1, "upll", 256, 125),     /* 589.824 MHz */
 102         UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 270, 25),     /* 270 MHz */
 103         UNIPHIER_CLK_FACTOR("gpll", -1, "ref", 10, 1),          /* 250 MHz */
 104         UNIPHIER_CLK_FACTOR("uart", 0, "a2pll", 1, 8),
 105         UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 32),
 106         UNIPHIER_CLK_FACTOR("spi", 1, "spll", 1, 32),
 107         UNIPHIER_LD4_SYS_CLK_NAND(2),
 108         UNIPHIER_SYS_CLK_NAND_4X(3),
 109         UNIPHIER_LD4_SYS_CLK_SD,
 110         UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
 111         UNIPHIER_PRO4_SYS_CLK_ETHER(6),
 112         UNIPHIER_CLK_GATE("ether-gb", 7, "gpll", 0x2104, 5),
 113         UNIPHIER_LD4_SYS_CLK_STDMAC(8),                 /* HSC, MIO, RLE */
 114         UNIPHIER_CLK_GATE("ether-phy", 10, "ref", 0x2260, 0),
 115         UNIPHIER_PRO4_SYS_CLK_GIO(12),                  /* Ether, SATA, USB3 */
 116         UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
 117         UNIPHIER_PRO4_SYS_CLK_USB3(15, 1),
 118         UNIPHIER_CLK_FACTOR("usb30-hsphy0", 16, "upll", 1, 12),
 119         UNIPHIER_CLK_FACTOR("usb30-ssphy0", 17, "ref", 1, 1),
 120         UNIPHIER_CLK_FACTOR("usb31-ssphy0", 20, "ref", 1, 1),
 121         UNIPHIER_CLK_GATE("sata0", 28, NULL, 0x2104, 18),
 122         UNIPHIER_CLK_GATE("sata1", 29, NULL, 0x2104, 19),
 123         UNIPHIER_PRO4_SYS_CLK_AIO(40),
 124         { /* sentinel */ }
 125 };
 126 
 127 const struct uniphier_clk_data uniphier_sld8_sys_clk_data[] = {
 128         UNIPHIER_CLK_FACTOR("spll", -1, "ref", 64, 1),          /* 1600 MHz */
 129         UNIPHIER_CLK_FACTOR("upll", -1, "ref", 288, 25),        /* 288 MHz */
 130         UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 270, 25),     /* 270 MHz */
 131         UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 20),
 132         UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16),
 133         UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 32),
 134         UNIPHIER_LD4_SYS_CLK_NAND(2),
 135         UNIPHIER_SYS_CLK_NAND_4X(3),
 136         UNIPHIER_LD4_SYS_CLK_SD,
 137         UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
 138         UNIPHIER_LD4_SYS_CLK_STDMAC(8),                 /* Ether, HSC, MIO */
 139         { /* sentinel */ }
 140 };
 141 
 142 const struct uniphier_clk_data uniphier_pro5_sys_clk_data[] = {
 143         UNIPHIER_CLK_FACTOR("spll", -1, "ref", 120, 1),         /* 2400 MHz */
 144         UNIPHIER_CLK_FACTOR("dapll1", -1, "ref", 128, 1),       /* 2560 MHz */
 145         UNIPHIER_CLK_FACTOR("dapll2", -1, "dapll1", 144, 125),  /* 2949.12 MHz */
 146         UNIPHIER_CLK_FACTOR("uart", 0, "dapll2", 1, 40),
 147         UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 48),
 148         UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 48),
 149         UNIPHIER_PRO5_SYS_CLK_NAND(2),
 150         UNIPHIER_SYS_CLK_NAND_4X(3),
 151         UNIPHIER_PRO5_SYS_CLK_SD,
 152         UNIPHIER_LD4_SYS_CLK_STDMAC(8),                         /* HSC */
 153         UNIPHIER_PRO4_SYS_CLK_GIO(12),                          /* PCIe, USB3 */
 154         UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
 155         UNIPHIER_PRO4_SYS_CLK_USB3(15, 1),
 156         UNIPHIER_CLK_GATE("pcie", 24, NULL, 0x2108, 2),
 157         UNIPHIER_PRO5_SYS_CLK_AIO(40),
 158         { /* sentinel */ }
 159 };
 160 
 161 const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[] = {
 162         UNIPHIER_CLK_FACTOR("spll", -1, "ref", 96, 1),          /* 2400 MHz */
 163         UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 27),
 164         UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 48),
 165         UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 48),
 166         UNIPHIER_PRO5_SYS_CLK_NAND(2),
 167         UNIPHIER_SYS_CLK_NAND_4X(3),
 168         UNIPHIER_PRO5_SYS_CLK_SD,
 169         UNIPHIER_PRO4_SYS_CLK_ETHER(6),
 170         UNIPHIER_LD4_SYS_CLK_STDMAC(8),                         /* HSC, RLE */
 171         /* GIO is always clock-enabled: no function for 0x2104 bit6 */
 172         UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
 173         UNIPHIER_PRO4_SYS_CLK_USB3(15, 1),
 174         /* The document mentions 0x2104 bit 18, but not functional */
 175         UNIPHIER_CLK_GATE("usb30-hsphy0", 16, NULL, 0x2104, 19),
 176         UNIPHIER_CLK_FACTOR("usb30-ssphy0", 17, "ref", 1, 1),
 177         UNIPHIER_CLK_FACTOR("usb30-ssphy1", 18, "ref", 1, 1),
 178         UNIPHIER_CLK_GATE("usb31-hsphy0", 20, NULL, 0x2104, 20),
 179         UNIPHIER_CLK_FACTOR("usb31-ssphy0", 21, "ref", 1, 1),
 180         UNIPHIER_CLK_GATE("sata0", 28, NULL, 0x2104, 22),
 181         UNIPHIER_PRO5_SYS_CLK_AIO(40),
 182         { /* sentinel */ }
 183 };
 184 
 185 const struct uniphier_clk_data uniphier_ld11_sys_clk_data[] = {
 186         UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 392, 5),         /* 1960 MHz */
 187         UNIPHIER_CLK_FACTOR("mpll", -1, "ref", 64, 1),          /* 1600 MHz */
 188         UNIPHIER_CLK_FACTOR("spll", -1, "ref", 80, 1),          /* 2000 MHz */
 189         UNIPHIER_CLK_FACTOR("vspll", -1, "ref", 80, 1),         /* 2000 MHz */
 190         UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 34),
 191         UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 40),
 192         UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 40),
 193         UNIPHIER_LD11_SYS_CLK_NAND(2),
 194         UNIPHIER_SYS_CLK_NAND_4X(3),
 195         UNIPHIER_LD11_SYS_CLK_EMMC(4),
 196         /* Index 5 reserved for eMMC PHY */
 197         UNIPHIER_LD11_SYS_CLK_ETHER(6),
 198         UNIPHIER_LD11_SYS_CLK_STDMAC(8),                        /* HSC, MIO */
 199         UNIPHIER_LD11_SYS_CLK_HSC(9),
 200         UNIPHIER_CLK_FACTOR("usb2", -1, "ref", 24, 25),
 201         UNIPHIER_LD11_SYS_CLK_AIO(40),
 202         UNIPHIER_LD11_SYS_CLK_EVEA(41),
 203         UNIPHIER_LD11_SYS_CLK_EXIV(42),
 204         /* CPU gears */
 205         UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8),
 206         UNIPHIER_CLK_DIV4("mpll", 2, 3, 4, 8),
 207         UNIPHIER_CLK_DIV3("spll", 3, 4, 8),
 208         /* Note: both gear1 and gear4 are spll/4.  This is not a bug. */
 209         UNIPHIER_CLK_CPUGEAR("cpu-ca53", 33, 0x8080, 0xf, 8,
 210                              "cpll/2", "spll/4", "cpll/3", "spll/3",
 211                              "spll/4", "spll/8", "cpll/4", "cpll/8"),
 212         UNIPHIER_CLK_CPUGEAR("cpu-ipp", 34, 0x8100, 0xf, 8,
 213                              "mpll/2", "spll/4", "mpll/3", "spll/3",
 214                              "spll/4", "spll/8", "mpll/4", "mpll/8"),
 215         { /* sentinel */ }
 216 };
 217 
 218 const struct uniphier_clk_data uniphier_ld20_sys_clk_data[] = {
 219         UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 88, 1),          /* ARM: 2200 MHz */
 220         UNIPHIER_CLK_FACTOR("gppll", -1, "ref", 52, 1),         /* Mali: 1300 MHz */
 221         UNIPHIER_CLK_FACTOR("mpll", -1, "ref", 64, 1),          /* Codec: 1600 MHz */
 222         UNIPHIER_CLK_FACTOR("spll", -1, "ref", 80, 1),          /* 2000 MHz */
 223         UNIPHIER_CLK_FACTOR("s2pll", -1, "ref", 88, 1),         /* IPP: 2200 MHz */
 224         UNIPHIER_CLK_FACTOR("vppll", -1, "ref", 504, 5),        /* 2520 MHz */
 225         UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 34),
 226         UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 40),
 227         UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 40),
 228         UNIPHIER_LD11_SYS_CLK_NAND(2),
 229         UNIPHIER_SYS_CLK_NAND_4X(3),
 230         UNIPHIER_LD11_SYS_CLK_EMMC(4),
 231         /* Index 5 reserved for eMMC PHY */
 232         UNIPHIER_LD20_SYS_CLK_SD,
 233         UNIPHIER_LD11_SYS_CLK_ETHER(6),
 234         UNIPHIER_LD11_SYS_CLK_STDMAC(8),                        /* HSC */
 235         UNIPHIER_LD11_SYS_CLK_HSC(9),
 236         /* GIO is always clock-enabled: no function for 0x210c bit5 */
 237         /*
 238          * clock for USB Link is enabled by the logic "OR" of bit 14 and bit 15.
 239          * We do not use bit 15 here.
 240          */
 241         UNIPHIER_CLK_GATE("usb30", 14, NULL, 0x210c, 14),
 242         UNIPHIER_CLK_GATE("usb30-hsphy0", 16, NULL, 0x210c, 12),
 243         UNIPHIER_CLK_GATE("usb30-hsphy1", 17, NULL, 0x210c, 13),
 244         UNIPHIER_CLK_FACTOR("usb30-ssphy0", 18, "ref", 1, 1),
 245         UNIPHIER_CLK_FACTOR("usb30-ssphy1", 19, "ref", 1, 1),
 246         UNIPHIER_CLK_GATE("pcie", 24, NULL, 0x210c, 4),
 247         UNIPHIER_LD11_SYS_CLK_AIO(40),
 248         UNIPHIER_LD11_SYS_CLK_EVEA(41),
 249         UNIPHIER_LD11_SYS_CLK_EXIV(42),
 250         /* CPU gears */
 251         UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8),
 252         UNIPHIER_CLK_DIV4("spll", 2, 3, 4, 8),
 253         UNIPHIER_CLK_DIV4("s2pll", 2, 3, 4, 8),
 254         UNIPHIER_CLK_CPUGEAR("cpu-ca72", 32, 0x8000, 0xf, 8,
 255                              "cpll/2", "spll/2", "cpll/3", "spll/3",
 256                              "spll/4", "spll/8", "cpll/4", "cpll/8"),
 257         UNIPHIER_CLK_CPUGEAR("cpu-ca53", 33, 0x8080, 0xf, 8,
 258                              "cpll/2", "spll/2", "cpll/3", "spll/3",
 259                              "spll/4", "spll/8", "cpll/4", "cpll/8"),
 260         UNIPHIER_CLK_CPUGEAR("cpu-ipp", 34, 0x8100, 0xf, 8,
 261                              "s2pll/2", "spll/2", "s2pll/3", "spll/3",
 262                              "spll/4", "spll/8", "s2pll/4", "s2pll/8"),
 263         { /* sentinel */ }
 264 };
 265 
 266 const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[] = {
 267         UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 104, 1),         /* ARM: 2600 MHz */
 268         UNIPHIER_CLK_FACTOR("spll", -1, "ref", 80, 1),          /* 2000 MHz */
 269         UNIPHIER_CLK_FACTOR("s2pll", -1, "ref", 88, 1),         /* IPP: 2400 MHz */
 270         UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 34),
 271         UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 40),
 272         UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 40),
 273         UNIPHIER_LD20_SYS_CLK_SD,
 274         UNIPHIER_LD11_SYS_CLK_NAND(2),
 275         UNIPHIER_SYS_CLK_NAND_4X(3),
 276         UNIPHIER_LD11_SYS_CLK_EMMC(4),
 277         UNIPHIER_CLK_GATE("ether0", 6, NULL, 0x210c, 9),
 278         UNIPHIER_CLK_GATE("ether1", 7, NULL, 0x210c, 10),
 279         UNIPHIER_CLK_GATE("usb30", 12, NULL, 0x210c, 4),        /* =GIO0 */
 280         UNIPHIER_CLK_GATE("usb31-0", 13, NULL, 0x210c, 5),      /* =GIO1 */
 281         UNIPHIER_CLK_GATE("usb31-1", 14, NULL, 0x210c, 6),      /* =GIO1-1 */
 282         UNIPHIER_CLK_GATE("usb30-hsphy0", 16, NULL, 0x210c, 16),
 283         UNIPHIER_CLK_GATE("usb30-ssphy0", 17, NULL, 0x210c, 18),
 284         UNIPHIER_CLK_GATE("usb30-ssphy1", 18, NULL, 0x210c, 20),
 285         UNIPHIER_CLK_GATE("usb31-hsphy0", 20, NULL, 0x210c, 17),
 286         UNIPHIER_CLK_GATE("usb31-ssphy0", 21, NULL, 0x210c, 19),
 287         UNIPHIER_CLK_GATE("pcie", 24, NULL, 0x210c, 3),
 288         UNIPHIER_CLK_GATE("sata0", 28, NULL, 0x210c, 7),
 289         UNIPHIER_CLK_GATE("sata1", 29, NULL, 0x210c, 8),
 290         UNIPHIER_CLK_GATE("sata-phy", 30, NULL, 0x210c, 21),
 291         /* CPU gears */
 292         UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8),
 293         UNIPHIER_CLK_DIV4("spll", 2, 3, 4, 8),
 294         UNIPHIER_CLK_DIV4("s2pll", 2, 3, 4, 8),
 295         UNIPHIER_CLK_CPUGEAR("cpu-ca53", 33, 0x8080, 0xf, 8,
 296                              "cpll/2", "spll/2", "cpll/3", "spll/3",
 297                              "spll/4", "spll/8", "cpll/4", "cpll/8"),
 298         UNIPHIER_CLK_CPUGEAR("cpu-ipp", 34, 0x8100, 0xf, 8,
 299                              "s2pll/2", "spll/2", "s2pll/3", "spll/3",
 300                              "spll/4", "spll/8", "s2pll/4", "s2pll/8"),
 301         { /* sentinel */ }
 302 };
/* [<][>][^][v][top][bottom][index][help] */
root/drivers/clk/uniphier/clk-uniphier-sys.c
