This source file includes following definitions.
- ms5611_i2c_reset
- ms5611_i2c_read_prom_word
- ms5611_i2c_read_adc
- ms5611_i2c_read_adc_temp_and_pressure
- ms5611_i2c_probe
- ms5611_i2c_remove
1
2
3
4
5
6
7
8
9
10
11
12
13
14 #include <linux/delay.h>
15 #include <linux/i2c.h>
16 #include <linux/module.h>
17 #include <linux/of_device.h>
18
19 #include "ms5611.h"
20
21 static int ms5611_i2c_reset(struct device *dev)
22 {
23 struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev));
24
25 return i2c_smbus_write_byte(st->client, MS5611_RESET);
26 }
27
28 static int ms5611_i2c_read_prom_word(struct device *dev, int index, u16 *word)
29 {
30 int ret;
31 struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev));
32
33 ret = i2c_smbus_read_word_swapped(st->client,
34 MS5611_READ_PROM_WORD + (index << 1));
35 if (ret < 0)
36 return ret;
37
38 *word = ret;
39
40 return 0;
41 }
42
43 static int ms5611_i2c_read_adc(struct ms5611_state *st, s32 *val)
44 {
45 int ret;
46 u8 buf[3];
47
48 ret = i2c_smbus_read_i2c_block_data(st->client, MS5611_READ_ADC,
49 3, buf);
50 if (ret < 0)
51 return ret;
52
53 *val = (buf[0] << 16) | (buf[1] << 8) | buf[2];
54
55 return 0;
56 }
57
58 static int ms5611_i2c_read_adc_temp_and_pressure(struct device *dev,
59 s32 *temp, s32 *pressure)
60 {
61 int ret;
62 struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev));
63 const struct ms5611_osr *osr = st->temp_osr;
64
65 ret = i2c_smbus_write_byte(st->client, osr->cmd);
66 if (ret < 0)
67 return ret;
68
69 usleep_range(osr->conv_usec, osr->conv_usec + (osr->conv_usec / 10UL));
70 ret = ms5611_i2c_read_adc(st, temp);
71 if (ret < 0)
72 return ret;
73
74 osr = st->pressure_osr;
75 ret = i2c_smbus_write_byte(st->client, osr->cmd);
76 if (ret < 0)
77 return ret;
78
79 usleep_range(osr->conv_usec, osr->conv_usec + (osr->conv_usec / 10UL));
80 return ms5611_i2c_read_adc(st, pressure);
81 }
82
83 static int ms5611_i2c_probe(struct i2c_client *client,
84 const struct i2c_device_id *id)
85 {
86 struct ms5611_state *st;
87 struct iio_dev *indio_dev;
88
89 if (!i2c_check_functionality(client->adapter,
90 I2C_FUNC_SMBUS_WRITE_BYTE |
91 I2C_FUNC_SMBUS_READ_WORD_DATA |
92 I2C_FUNC_SMBUS_READ_I2C_BLOCK))
93 return -EOPNOTSUPP;
94
95 indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
96 if (!indio_dev)
97 return -ENOMEM;
98
99 st = iio_priv(indio_dev);
100 i2c_set_clientdata(client, indio_dev);
101 st->reset = ms5611_i2c_reset;
102 st->read_prom_word = ms5611_i2c_read_prom_word;
103 st->read_adc_temp_and_pressure = ms5611_i2c_read_adc_temp_and_pressure;
104 st->client = client;
105
106 return ms5611_probe(indio_dev, &client->dev, id->name, id->driver_data);
107 }
108
109 static int ms5611_i2c_remove(struct i2c_client *client)
110 {
111 return ms5611_remove(i2c_get_clientdata(client));
112 }
113
114 #if defined(CONFIG_OF)
115 static const struct of_device_id ms5611_i2c_matches[] = {
116 { .compatible = "meas,ms5611" },
117 { .compatible = "meas,ms5607" },
118 { }
119 };
120 MODULE_DEVICE_TABLE(of, ms5611_i2c_matches);
121 #endif
122
123 static const struct i2c_device_id ms5611_id[] = {
124 { "ms5611", MS5611 },
125 { "ms5607", MS5607 },
126 { }
127 };
128 MODULE_DEVICE_TABLE(i2c, ms5611_id);
129
130 static struct i2c_driver ms5611_driver = {
131 .driver = {
132 .name = "ms5611",
133 .of_match_table = of_match_ptr(ms5611_i2c_matches)
134 },
135 .id_table = ms5611_id,
136 .probe = ms5611_i2c_probe,
137 .remove = ms5611_i2c_remove,
138 };
139 module_i2c_driver(ms5611_driver);
140
141 MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>");
142 MODULE_DESCRIPTION("MS5611 i2c driver");
143 MODULE_LICENSE("GPL v2");