root/drivers/iio/pressure/st_pressure_spi.c

DEFINITIONS

1. st_press_spi_probe
2. st_press_spi_remove

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * STMicroelectronics pressures driver
   4  *
   5  * Copyright 2013 STMicroelectronics Inc.
   6  *
   7  * Denis Ciocca <denis.ciocca@st.com>
   8  */
   9 
  10 #include <linux/kernel.h>
  11 #include <linux/module.h>
  12 #include <linux/slab.h>
  13 #include <linux/spi/spi.h>
  14 #include <linux/iio/iio.h>
  15 
  16 #include <linux/iio/common/st_sensors.h>
  17 #include <linux/iio/common/st_sensors_spi.h>
  18 #include "st_pressure.h"
  19 
  20 #ifdef CONFIG_OF
  21 /*
  22  * For new single-chip sensors use <device_name> as compatible string.
  23  * For old single-chip devices keep <device_name>-press to maintain
  24  * compatibility
  25  */
  26 static const struct of_device_id st_press_of_match[] = {
  27         {
  28                 .compatible = "st,lps001wp-press",
  29                 .data = LPS001WP_PRESS_DEV_NAME,
  30         },
  31         {
  32                 .compatible = "st,lps25h-press",
  33                 .data = LPS25H_PRESS_DEV_NAME,
  34         },
  35         {
  36                 .compatible = "st,lps331ap-press",
  37                 .data = LPS331AP_PRESS_DEV_NAME,
  38         },
  39         {
  40                 .compatible = "st,lps22hb-press",
  41                 .data = LPS22HB_PRESS_DEV_NAME,
  42         },
  43         {
  44                 .compatible = "st,lps33hw",
  45                 .data = LPS33HW_PRESS_DEV_NAME,
  46         },
  47         {
  48                 .compatible = "st,lps35hw",
  49                 .data = LPS35HW_PRESS_DEV_NAME,
  50         },
  51         {
  52                 .compatible = "st,lps22hh",
  53                 .data = LPS22HH_PRESS_DEV_NAME,
  54         },
  55         {},
  56 };
  57 MODULE_DEVICE_TABLE(of, st_press_of_match);
  58 #else
  59 #define st_press_of_match       NULL
  60 #endif
  61 
  62 static int st_press_spi_probe(struct spi_device *spi)
  63 {
  64         const struct st_sensor_settings *settings;
  65         struct st_sensor_data *press_data;
  66         struct iio_dev *indio_dev;
  67         int err;
  68 
  69         st_sensors_of_name_probe(&spi->dev, st_press_of_match,
  70                                  spi->modalias, sizeof(spi->modalias));
  71 
  72         settings = st_press_get_settings(spi->modalias);
  73         if (!settings) {
  74                 dev_err(&spi->dev, "device name %s not recognized.\n",
  75                         spi->modalias);
  76                 return -ENODEV;
  77         }
  78 
  79         indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*press_data));
  80         if (!indio_dev)
  81                 return -ENOMEM;
  82 
  83         press_data = iio_priv(indio_dev);
  84         press_data->sensor_settings = (struct st_sensor_settings *)settings;
  85 
  86         err = st_sensors_spi_configure(indio_dev, spi);
  87         if (err < 0)
  88                 return err;
  89 
  90         err = st_press_common_probe(indio_dev);
  91         if (err < 0)
  92                 return err;
  93 
  94         return 0;
  95 }
  96 
  97 static int st_press_spi_remove(struct spi_device *spi)
  98 {
  99         st_press_common_remove(spi_get_drvdata(spi));
 100 
 101         return 0;
 102 }
 103 
 104 static const struct spi_device_id st_press_id_table[] = {
 105         { LPS001WP_PRESS_DEV_NAME },
 106         { LPS25H_PRESS_DEV_NAME },
 107         { LPS331AP_PRESS_DEV_NAME },
 108         { LPS22HB_PRESS_DEV_NAME },
 109         { LPS33HW_PRESS_DEV_NAME },
 110         { LPS35HW_PRESS_DEV_NAME },
 111         { LPS22HH_PRESS_DEV_NAME },
 112         {},
 113 };
 114 MODULE_DEVICE_TABLE(spi, st_press_id_table);
 115 
 116 static struct spi_driver st_press_driver = {
 117         .driver = {
 118                 .name = "st-press-spi",
 119                 .of_match_table = of_match_ptr(st_press_of_match),
 120         },
 121         .probe = st_press_spi_probe,
 122         .remove = st_press_spi_remove,
 123         .id_table = st_press_id_table,
 124 };
 125 module_spi_driver(st_press_driver);
 126 
 127 MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
 128 MODULE_DESCRIPTION("STMicroelectronics pressures spi driver");
 129 MODULE_LICENSE("GPL v2");