root/drivers/iio/gyro/ssp_gyro_sensor.c

DEFINITIONS

1. ssp_gyro_read_raw
2. ssp_gyro_write_raw
3. ssp_process_gyro_data
4. ssp_gyro_probe

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  *  Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved.
   4  */
   5 
   6 #include <linux/iio/common/ssp_sensors.h>
   7 #include <linux/iio/iio.h>
   8 #include <linux/iio/buffer.h>
   9 #include <linux/iio/kfifo_buf.h>
  10 #include <linux/module.h>
  11 #include <linux/platform_device.h>
  12 #include <linux/slab.h>
  13 #include "../common/ssp_sensors/ssp_iio_sensor.h"
  14 
  15 #define SSP_CHANNEL_COUNT 3
  16 
  17 #define SSP_GYROSCOPE_NAME "ssp-gyroscope"
  18 static const char ssp_gyro_name[] = SSP_GYROSCOPE_NAME;
  19 
  20 enum ssp_gyro_3d_channel {
  21         SSP_CHANNEL_SCAN_INDEX_X,
  22         SSP_CHANNEL_SCAN_INDEX_Y,
  23         SSP_CHANNEL_SCAN_INDEX_Z,
  24         SSP_CHANNEL_SCAN_INDEX_TIME,
  25 };
  26 
  27 static int ssp_gyro_read_raw(struct iio_dev *indio_dev,
  28                              struct iio_chan_spec const *chan, int *val,
  29                              int *val2, long mask)
  30 {
  31         u32 t;
  32         struct ssp_data *data = dev_get_drvdata(indio_dev->dev.parent->parent);
  33 
  34         switch (mask) {
  35         case IIO_CHAN_INFO_SAMP_FREQ:
  36                 t = ssp_get_sensor_delay(data, SSP_GYROSCOPE_SENSOR);
  37                 ssp_convert_to_freq(t, val, val2);
  38                 return IIO_VAL_INT_PLUS_MICRO;
  39         default:
  40                 break;
  41         }
  42 
  43         return -EINVAL;
  44 }
  45 
  46 static int ssp_gyro_write_raw(struct iio_dev *indio_dev,
  47                               struct iio_chan_spec const *chan, int val,
  48                               int val2, long mask)
  49 {
  50         int ret;
  51         struct ssp_data *data = dev_get_drvdata(indio_dev->dev.parent->parent);
  52 
  53         switch (mask) {
  54         case IIO_CHAN_INFO_SAMP_FREQ:
  55                 ret = ssp_convert_to_time(val, val2);
  56                 ret = ssp_change_delay(data, SSP_GYROSCOPE_SENSOR, ret);
  57                 if (ret < 0)
  58                         dev_err(&indio_dev->dev, "gyro sensor enable fail\n");
  59 
  60                 return ret;
  61         default:
  62                 break;
  63         }
  64 
  65         return -EINVAL;
  66 }
  67 
  68 static const struct iio_info ssp_gyro_iio_info = {
  69         .read_raw = &ssp_gyro_read_raw,
  70         .write_raw = &ssp_gyro_write_raw,
  71 };
  72 
  73 static const unsigned long ssp_gyro_scan_mask[] = { 0x07, 0, };
  74 
  75 static const struct iio_chan_spec ssp_gyro_channels[] = {
  76         SSP_CHANNEL_AG(IIO_ANGL_VEL, IIO_MOD_X, SSP_CHANNEL_SCAN_INDEX_X),
  77         SSP_CHANNEL_AG(IIO_ANGL_VEL, IIO_MOD_Y, SSP_CHANNEL_SCAN_INDEX_Y),
  78         SSP_CHANNEL_AG(IIO_ANGL_VEL, IIO_MOD_Z, SSP_CHANNEL_SCAN_INDEX_Z),
  79         SSP_CHAN_TIMESTAMP(SSP_CHANNEL_SCAN_INDEX_TIME),
  80 };
  81 
  82 static int ssp_process_gyro_data(struct iio_dev *indio_dev, void *buf,
  83                                  int64_t timestamp)
  84 {
  85         return ssp_common_process_data(indio_dev, buf, SSP_GYROSCOPE_SIZE,
  86                                        timestamp);
  87 }
  88 
  89 static const struct iio_buffer_setup_ops ssp_gyro_buffer_ops = {
  90         .postenable = &ssp_common_buffer_postenable,
  91         .postdisable = &ssp_common_buffer_postdisable,
  92 };
  93 
  94 static int ssp_gyro_probe(struct platform_device *pdev)
  95 {
  96         int ret;
  97         struct iio_dev *indio_dev;
  98         struct ssp_sensor_data *spd;
  99         struct iio_buffer *buffer;
 100 
 101         indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*spd));
 102         if (!indio_dev)
 103                 return -ENOMEM;
 104 
 105         spd = iio_priv(indio_dev);
 106 
 107         spd->process_data = ssp_process_gyro_data;
 108         spd->type = SSP_GYROSCOPE_SENSOR;
 109 
 110         indio_dev->name = ssp_gyro_name;
 111         indio_dev->dev.parent = &pdev->dev;
 112         indio_dev->info = &ssp_gyro_iio_info;
 113         indio_dev->modes = INDIO_BUFFER_SOFTWARE;
 114         indio_dev->channels = ssp_gyro_channels;
 115         indio_dev->num_channels = ARRAY_SIZE(ssp_gyro_channels);
 116         indio_dev->available_scan_masks = ssp_gyro_scan_mask;
 117 
 118         buffer = devm_iio_kfifo_allocate(&pdev->dev);
 119         if (!buffer)
 120                 return -ENOMEM;
 121 
 122         iio_device_attach_buffer(indio_dev, buffer);
 123 
 124         indio_dev->setup_ops = &ssp_gyro_buffer_ops;
 125 
 126         platform_set_drvdata(pdev, indio_dev);
 127 
 128         ret = devm_iio_device_register(&pdev->dev, indio_dev);
 129         if (ret < 0)
 130                 return ret;
 131 
 132         /* ssp registering should be done after all iio setup */
 133         ssp_register_consumer(indio_dev, SSP_GYROSCOPE_SENSOR);
 134 
 135         return 0;
 136 }
 137 
 138 static struct platform_driver ssp_gyro_driver = {
 139         .driver = {
 140                 .name = SSP_GYROSCOPE_NAME,
 141         },
 142         .probe = ssp_gyro_probe,
 143 };
 144 
 145 module_platform_driver(ssp_gyro_driver);
 146 
 147 MODULE_AUTHOR("Karol Wrona <k.wrona@samsung.com>");
 148 MODULE_DESCRIPTION("Samsung sensorhub gyroscopes driver");
 149 MODULE_LICENSE("GPL");