This source file includes following definitions.
- metrousb_is_unidirectional_mode
- metrousb_calc_num_ports
- metrousb_send_unidirectional_cmd
- metrousb_read_int_callback
- metrousb_cleanup
- metrousb_open
- metrousb_set_modem_ctrl
- metrousb_port_probe
- metrousb_port_remove
- metrousb_throttle
- metrousb_tiocmget
- metrousb_tiocmset
- metrousb_unthrottle
1
2
3
4
5
6
7
8
9
10 #include <linux/kernel.h>
11 #include <linux/tty.h>
12 #include <linux/module.h>
13 #include <linux/usb.h>
14 #include <linux/errno.h>
15 #include <linux/slab.h>
16 #include <linux/tty_driver.h>
17 #include <linux/tty_flip.h>
18 #include <linux/moduleparam.h>
19 #include <linux/spinlock.h>
20 #include <linux/uaccess.h>
21 #include <linux/usb/serial.h>
22
23 #define DRIVER_DESC "Metrologic Instruments Inc. - USB-POS driver"
24
25
26 #define FOCUS_VENDOR_ID 0x0C2E
27 #define FOCUS_PRODUCT_ID_BI 0x0720
28 #define FOCUS_PRODUCT_ID_UNI 0x0700
29
30 #define METROUSB_SET_REQUEST_TYPE 0x40
31 #define METROUSB_SET_MODEM_CTRL_REQUEST 10
32 #define METROUSB_SET_BREAK_REQUEST 0x40
33 #define METROUSB_MCR_NONE 0x08
34 #define METROUSB_MCR_RTS 0x0a
35 #define METROUSB_MCR_DTR 0x09
36 #define WDR_TIMEOUT 5000
37
38
39 struct metrousb_private {
40 spinlock_t lock;
41 int throttled;
42 unsigned long control_state;
43 };
44
45
46 static const struct usb_device_id id_table[] = {
47 { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_BI) },
48 { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_UNI) },
49 { USB_DEVICE_INTERFACE_CLASS(0x0c2e, 0x0730, 0xff) },
50 { },
51 };
52 MODULE_DEVICE_TABLE(usb, id_table);
53
54
55 #define UNI_CMD_OPEN 0x80
56 #define UNI_CMD_CLOSE 0xFF
57
58 static int metrousb_is_unidirectional_mode(struct usb_serial *serial)
59 {
60 u16 product_id = le16_to_cpu(serial->dev->descriptor.idProduct);
61
62 return product_id == FOCUS_PRODUCT_ID_UNI;
63 }
64
65 static int metrousb_calc_num_ports(struct usb_serial *serial,
66 struct usb_serial_endpoints *epds)
67 {
68 if (metrousb_is_unidirectional_mode(serial)) {
69 if (epds->num_interrupt_out == 0) {
70 dev_err(&serial->interface->dev, "interrupt-out endpoint missing\n");
71 return -ENODEV;
72 }
73 }
74
75 return 1;
76 }
77
78 static int metrousb_send_unidirectional_cmd(u8 cmd, struct usb_serial_port *port)
79 {
80 int ret;
81 int actual_len;
82 u8 *buffer_cmd = NULL;
83
84 if (!metrousb_is_unidirectional_mode(port->serial))
85 return 0;
86
87 buffer_cmd = kzalloc(sizeof(cmd), GFP_KERNEL);
88 if (!buffer_cmd)
89 return -ENOMEM;
90
91 *buffer_cmd = cmd;
92
93 ret = usb_interrupt_msg(port->serial->dev,
94 usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
95 buffer_cmd, sizeof(cmd),
96 &actual_len, USB_CTRL_SET_TIMEOUT);
97
98 kfree(buffer_cmd);
99
100 if (ret < 0)
101 return ret;
102 else if (actual_len != sizeof(cmd))
103 return -EIO;
104 return 0;
105 }
106
107 static void metrousb_read_int_callback(struct urb *urb)
108 {
109 struct usb_serial_port *port = urb->context;
110 struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
111 unsigned char *data = urb->transfer_buffer;
112 int throttled = 0;
113 int result = 0;
114 unsigned long flags = 0;
115
116 dev_dbg(&port->dev, "%s\n", __func__);
117
118 switch (urb->status) {
119 case 0:
120
121 break;
122 case -ECONNRESET:
123 case -ENOENT:
124 case -ESHUTDOWN:
125
126 dev_dbg(&port->dev,
127 "%s - urb shutting down, error code=%d\n",
128 __func__, urb->status);
129 return;
130 default:
131 dev_dbg(&port->dev,
132 "%s - non-zero urb received, error code=%d\n",
133 __func__, urb->status);
134 goto exit;
135 }
136
137
138
139 if (urb->actual_length) {
140
141 tty_insert_flip_string(&port->port, data, urb->actual_length);
142
143
144 tty_flip_buffer_push(&port->port);
145 }
146
147
148 spin_lock_irqsave(&metro_priv->lock, flags);
149 throttled = metro_priv->throttled;
150 spin_unlock_irqrestore(&metro_priv->lock, flags);
151
152 if (throttled)
153 return;
154 exit:
155
156 result = usb_submit_urb(urb, GFP_ATOMIC);
157 if (result)
158 dev_err(&port->dev,
159 "%s - failed submitting interrupt in urb, error code=%d\n",
160 __func__, result);
161 }
162
163 static void metrousb_cleanup(struct usb_serial_port *port)
164 {
165 usb_kill_urb(port->interrupt_in_urb);
166
167 metrousb_send_unidirectional_cmd(UNI_CMD_CLOSE, port);
168 }
169
170 static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port)
171 {
172 struct usb_serial *serial = port->serial;
173 struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
174 unsigned long flags = 0;
175 int result = 0;
176
177
178 spin_lock_irqsave(&metro_priv->lock, flags);
179 metro_priv->control_state = 0;
180 metro_priv->throttled = 0;
181 spin_unlock_irqrestore(&metro_priv->lock, flags);
182
183
184 usb_clear_halt(serial->dev, port->interrupt_in_urb->pipe);
185
186
187 usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
188 usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
189 port->interrupt_in_urb->transfer_buffer,
190 port->interrupt_in_urb->transfer_buffer_length,
191 metrousb_read_int_callback, port, 1);
192 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
193
194 if (result) {
195 dev_err(&port->dev,
196 "%s - failed submitting interrupt in urb, error code=%d\n",
197 __func__, result);
198 return result;
199 }
200
201
202 result = metrousb_send_unidirectional_cmd(UNI_CMD_OPEN, port);
203 if (result) {
204 dev_err(&port->dev,
205 "%s - failed to configure device, error code=%d\n",
206 __func__, result);
207 goto err_kill_urb;
208 }
209
210 return 0;
211
212 err_kill_urb:
213 usb_kill_urb(port->interrupt_in_urb);
214
215 return result;
216 }
217
218 static int metrousb_set_modem_ctrl(struct usb_serial *serial, unsigned int control_state)
219 {
220 int retval = 0;
221 unsigned char mcr = METROUSB_MCR_NONE;
222
223 dev_dbg(&serial->dev->dev, "%s - control state = %d\n",
224 __func__, control_state);
225
226
227 if (control_state & TIOCM_DTR)
228 mcr |= METROUSB_MCR_DTR;
229 if (control_state & TIOCM_RTS)
230 mcr |= METROUSB_MCR_RTS;
231
232
233 retval = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
234 METROUSB_SET_REQUEST_TYPE, METROUSB_SET_MODEM_CTRL_REQUEST,
235 control_state, 0, NULL, 0, WDR_TIMEOUT);
236 if (retval < 0)
237 dev_err(&serial->dev->dev,
238 "%s - set modem ctrl=0x%x failed, error code=%d\n",
239 __func__, mcr, retval);
240
241 return retval;
242 }
243
244 static int metrousb_port_probe(struct usb_serial_port *port)
245 {
246 struct metrousb_private *metro_priv;
247
248 metro_priv = kzalloc(sizeof(*metro_priv), GFP_KERNEL);
249 if (!metro_priv)
250 return -ENOMEM;
251
252 spin_lock_init(&metro_priv->lock);
253
254 usb_set_serial_port_data(port, metro_priv);
255
256 return 0;
257 }
258
259 static int metrousb_port_remove(struct usb_serial_port *port)
260 {
261 struct metrousb_private *metro_priv;
262
263 metro_priv = usb_get_serial_port_data(port);
264 kfree(metro_priv);
265
266 return 0;
267 }
268
269 static void metrousb_throttle(struct tty_struct *tty)
270 {
271 struct usb_serial_port *port = tty->driver_data;
272 struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
273 unsigned long flags = 0;
274
275
276 spin_lock_irqsave(&metro_priv->lock, flags);
277 metro_priv->throttled = 1;
278 spin_unlock_irqrestore(&metro_priv->lock, flags);
279 }
280
281 static int metrousb_tiocmget(struct tty_struct *tty)
282 {
283 unsigned long control_state = 0;
284 struct usb_serial_port *port = tty->driver_data;
285 struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
286 unsigned long flags = 0;
287
288 spin_lock_irqsave(&metro_priv->lock, flags);
289 control_state = metro_priv->control_state;
290 spin_unlock_irqrestore(&metro_priv->lock, flags);
291
292 return control_state;
293 }
294
295 static int metrousb_tiocmset(struct tty_struct *tty,
296 unsigned int set, unsigned int clear)
297 {
298 struct usb_serial_port *port = tty->driver_data;
299 struct usb_serial *serial = port->serial;
300 struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
301 unsigned long flags = 0;
302 unsigned long control_state = 0;
303
304 dev_dbg(tty->dev, "%s - set=%d, clear=%d\n", __func__, set, clear);
305
306 spin_lock_irqsave(&metro_priv->lock, flags);
307 control_state = metro_priv->control_state;
308
309
310 if (set & TIOCM_RTS)
311 control_state |= TIOCM_RTS;
312 if (set & TIOCM_DTR)
313 control_state |= TIOCM_DTR;
314 if (clear & TIOCM_RTS)
315 control_state &= ~TIOCM_RTS;
316 if (clear & TIOCM_DTR)
317 control_state &= ~TIOCM_DTR;
318
319 metro_priv->control_state = control_state;
320 spin_unlock_irqrestore(&metro_priv->lock, flags);
321 return metrousb_set_modem_ctrl(serial, control_state);
322 }
323
324 static void metrousb_unthrottle(struct tty_struct *tty)
325 {
326 struct usb_serial_port *port = tty->driver_data;
327 struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
328 unsigned long flags = 0;
329 int result = 0;
330
331
332 spin_lock_irqsave(&metro_priv->lock, flags);
333 metro_priv->throttled = 0;
334 spin_unlock_irqrestore(&metro_priv->lock, flags);
335
336
337 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
338 if (result)
339 dev_err(tty->dev,
340 "failed submitting interrupt in urb error code=%d\n",
341 result);
342 }
343
344 static struct usb_serial_driver metrousb_device = {
345 .driver = {
346 .owner = THIS_MODULE,
347 .name = "metro-usb",
348 },
349 .description = "Metrologic USB to Serial",
350 .id_table = id_table,
351 .num_interrupt_in = 1,
352 .calc_num_ports = metrousb_calc_num_ports,
353 .open = metrousb_open,
354 .close = metrousb_cleanup,
355 .read_int_callback = metrousb_read_int_callback,
356 .port_probe = metrousb_port_probe,
357 .port_remove = metrousb_port_remove,
358 .throttle = metrousb_throttle,
359 .unthrottle = metrousb_unthrottle,
360 .tiocmget = metrousb_tiocmget,
361 .tiocmset = metrousb_tiocmset,
362 };
363
364 static struct usb_serial_driver * const serial_drivers[] = {
365 &metrousb_device,
366 NULL,
367 };
368
369 module_usb_serial_driver(serial_drivers, id_table);
370
371 MODULE_LICENSE("GPL v2");
372 MODULE_AUTHOR("Philip Nicastro");
373 MODULE_AUTHOR("Aleksey Babahin <tamerlan311@gmail.com>");
374 MODULE_DESCRIPTION(DRIVER_DESC);