This source file includes following definitions.
- handle_quectel_ec20
- qcprobe
- qc_attach
- qc_release
1
2
3
4
5
6
7
8
9
10 #include <linux/tty.h>
11 #include <linux/tty_flip.h>
12 #include <linux/module.h>
13 #include <linux/usb.h>
14 #include <linux/usb/serial.h>
15 #include <linux/slab.h>
16 #include "usb-wwan.h"
17
18 #define DRIVER_AUTHOR "Qualcomm Inc"
19 #define DRIVER_DESC "Qualcomm USB Serial driver"
20
21 #define QUECTEL_EC20_PID 0x9215
22
23
24 enum qcserial_layouts {
25 QCSERIAL_G2K = 0,
26 QCSERIAL_G1K = 1,
27 QCSERIAL_SWI = 2,
28 QCSERIAL_HWI = 3,
29 };
30
31 #define DEVICE_G1K(v, p) \
32 USB_DEVICE(v, p), .driver_info = QCSERIAL_G1K
33 #define DEVICE_SWI(v, p) \
34 USB_DEVICE(v, p), .driver_info = QCSERIAL_SWI
35 #define DEVICE_HWI(v, p) \
36 USB_DEVICE(v, p), .driver_info = QCSERIAL_HWI
37
38 static const struct usb_device_id id_table[] = {
39
40 {DEVICE_G1K(0x05c6, 0x9211)},
41 {DEVICE_G1K(0x05c6, 0x9212)},
42 {DEVICE_G1K(0x03f0, 0x1f1d)},
43 {DEVICE_G1K(0x03f0, 0x201d)},
44 {DEVICE_G1K(0x04da, 0x250d)},
45 {DEVICE_G1K(0x04da, 0x250c)},
46 {DEVICE_G1K(0x413c, 0x8172)},
47 {DEVICE_G1K(0x413c, 0x8171)},
48 {DEVICE_G1K(0x1410, 0xa001)},
49 {DEVICE_G1K(0x1410, 0xa002)},
50 {DEVICE_G1K(0x1410, 0xa003)},
51 {DEVICE_G1K(0x1410, 0xa004)},
52 {DEVICE_G1K(0x1410, 0xa005)},
53 {DEVICE_G1K(0x1410, 0xa006)},
54 {DEVICE_G1K(0x1410, 0xa007)},
55 {DEVICE_G1K(0x1410, 0xa008)},
56 {DEVICE_G1K(0x0b05, 0x1776)},
57 {DEVICE_G1K(0x0b05, 0x1774)},
58 {DEVICE_G1K(0x19d2, 0xfff3)},
59 {DEVICE_G1K(0x19d2, 0xfff2)},
60 {DEVICE_G1K(0x1557, 0x0a80)},
61 {DEVICE_G1K(0x05c6, 0x9001)},
62 {DEVICE_G1K(0x05c6, 0x9002)},
63 {DEVICE_G1K(0x05c6, 0x9202)},
64 {DEVICE_G1K(0x05c6, 0x9203)},
65 {DEVICE_G1K(0x05c6, 0x9222)},
66 {DEVICE_G1K(0x05c6, 0x9008)},
67 {DEVICE_G1K(0x05c6, 0x9009)},
68 {DEVICE_G1K(0x05c6, 0x9201)},
69 {DEVICE_G1K(0x05c6, 0x9221)},
70 {DEVICE_G1K(0x05c6, 0x9231)},
71 {DEVICE_G1K(0x1f45, 0x0001)},
72 {DEVICE_G1K(0x1bc7, 0x900e)},
73
74
75 {USB_DEVICE(0x1410, 0xa010)},
76 {USB_DEVICE(0x1410, 0xa011)},
77 {USB_DEVICE(0x1410, 0xa012)},
78 {USB_DEVICE(0x1410, 0xa013)},
79 {USB_DEVICE(0x1410, 0xa014)},
80 {USB_DEVICE(0x413c, 0x8185)},
81 {USB_DEVICE(0x413c, 0x8186)},
82 {USB_DEVICE(0x05c6, 0x9208)},
83 {USB_DEVICE(0x05c6, 0x920b)},
84 {USB_DEVICE(0x05c6, 0x9224)},
85 {USB_DEVICE(0x05c6, 0x9225)},
86 {USB_DEVICE(0x05c6, 0x9244)},
87 {USB_DEVICE(0x05c6, 0x9245)},
88 {USB_DEVICE(0x03f0, 0x241d)},
89 {USB_DEVICE(0x03f0, 0x251d)},
90 {USB_DEVICE(0x05c6, 0x9214)},
91 {USB_DEVICE(0x05c6, 0x9215)},
92 {USB_DEVICE(0x05c6, 0x9264)},
93 {USB_DEVICE(0x05c6, 0x9265)},
94 {USB_DEVICE(0x05c6, 0x9234)},
95 {USB_DEVICE(0x05c6, 0x9235)},
96 {USB_DEVICE(0x05c6, 0x9274)},
97 {USB_DEVICE(0x05c6, 0x9275)},
98 {USB_DEVICE(0x1199, 0x9000)},
99 {USB_DEVICE(0x1199, 0x9001)},
100 {USB_DEVICE(0x1199, 0x9002)},
101 {USB_DEVICE(0x1199, 0x9003)},
102 {USB_DEVICE(0x1199, 0x9004)},
103 {USB_DEVICE(0x1199, 0x9005)},
104 {USB_DEVICE(0x1199, 0x9006)},
105 {USB_DEVICE(0x1199, 0x9007)},
106 {USB_DEVICE(0x1199, 0x9008)},
107 {USB_DEVICE(0x1199, 0x9009)},
108 {USB_DEVICE(0x1199, 0x900a)},
109 {USB_DEVICE(0x1199, 0x9011)},
110 {USB_DEVICE(0x16d8, 0x8001)},
111 {USB_DEVICE(0x16d8, 0x8002)},
112 {USB_DEVICE(0x05c6, 0x9204)},
113 {USB_DEVICE(0x05c6, 0x9205)},
114
115
116 {USB_DEVICE(0x03f0, 0x371d)},
117 {USB_DEVICE(0x05c6, 0x920c)},
118 {USB_DEVICE(0x05c6, 0x920d)},
119 {USB_DEVICE(0x1410, 0xa020)},
120 {USB_DEVICE(0x1410, 0xa021)},
121 {USB_DEVICE(0x413c, 0x8193)},
122 {USB_DEVICE(0x413c, 0x8194)},
123 {USB_DEVICE(0x413c, 0x81a6)},
124 {USB_DEVICE(0x1199, 0x68a4)},
125 {USB_DEVICE(0x1199, 0x68a5)},
126 {USB_DEVICE(0x1199, 0x68a8)},
127 {USB_DEVICE(0x1199, 0x68a9)},
128 {USB_DEVICE(0x1199, 0x9010)},
129 {USB_DEVICE(0x1199, 0x9012)},
130 {USB_DEVICE(0x1199, 0x9013)},
131 {USB_DEVICE(0x1199, 0x9014)},
132 {USB_DEVICE(0x1199, 0x9015)},
133 {USB_DEVICE(0x1199, 0x9018)},
134 {USB_DEVICE(0x1199, 0x9019)},
135 {USB_DEVICE(0x1199, 0x901b)},
136 {USB_DEVICE(0x12D1, 0x14F0)},
137 {USB_DEVICE(0x12D1, 0x14F1)},
138 {USB_DEVICE(0x0AF0, 0x8120)},
139
140
141 {DEVICE_SWI(0x03f0, 0x4e1d)},
142 {DEVICE_SWI(0x0f3d, 0x68a2)},
143 {DEVICE_SWI(0x114f, 0x68a2)},
144 {DEVICE_SWI(0x1199, 0x68a2)},
145 {DEVICE_SWI(0x1199, 0x68c0)},
146 {DEVICE_SWI(0x1199, 0x901c)},
147 {DEVICE_SWI(0x1199, 0x901e)},
148 {DEVICE_SWI(0x1199, 0x901f)},
149 {DEVICE_SWI(0x1199, 0x9040)},
150 {DEVICE_SWI(0x1199, 0x9041)},
151 {DEVICE_SWI(0x1199, 0x9051)},
152 {DEVICE_SWI(0x1199, 0x9053)},
153 {DEVICE_SWI(0x1199, 0x9054)},
154 {DEVICE_SWI(0x1199, 0x9055)},
155 {DEVICE_SWI(0x1199, 0x9056)},
156 {DEVICE_SWI(0x1199, 0x9060)},
157 {DEVICE_SWI(0x1199, 0x9061)},
158 {DEVICE_SWI(0x1199, 0x9063)},
159 {DEVICE_SWI(0x1199, 0x9070)},
160 {DEVICE_SWI(0x1199, 0x9071)},
161 {DEVICE_SWI(0x1199, 0x9078)},
162 {DEVICE_SWI(0x1199, 0x9079)},
163 {DEVICE_SWI(0x1199, 0x907a)},
164 {DEVICE_SWI(0x1199, 0x907b)},
165 {DEVICE_SWI(0x1199, 0x9090)},
166 {DEVICE_SWI(0x1199, 0x9091)},
167 {DEVICE_SWI(0x413c, 0x81a2)},
168 {DEVICE_SWI(0x413c, 0x81a3)},
169 {DEVICE_SWI(0x413c, 0x81a4)},
170 {DEVICE_SWI(0x413c, 0x81a8)},
171 {DEVICE_SWI(0x413c, 0x81a9)},
172 {DEVICE_SWI(0x413c, 0x81b1)},
173 {DEVICE_SWI(0x413c, 0x81b3)},
174 {DEVICE_SWI(0x413c, 0x81b5)},
175 {DEVICE_SWI(0x413c, 0x81b6)},
176 {DEVICE_SWI(0x413c, 0x81cb)},
177 {DEVICE_SWI(0x413c, 0x81cc)},
178 {DEVICE_SWI(0x413c, 0x81cf)},
179 {DEVICE_SWI(0x413c, 0x81d0)},
180 {DEVICE_SWI(0x413c, 0x81d1)},
181 {DEVICE_SWI(0x413c, 0x81d2)},
182
183
184 {DEVICE_HWI(0x03f0, 0x581d)},
185
186 { }
187 };
188 MODULE_DEVICE_TABLE(usb, id_table);
189
190 static int handle_quectel_ec20(struct device *dev, int ifnum)
191 {
192 int altsetting = 0;
193
194
195
196
197
198
199
200
201
202 switch (ifnum) {
203 case 0:
204 dev_dbg(dev, "Quectel EC20 DM/DIAG interface found\n");
205 break;
206 case 1:
207 dev_dbg(dev, "Quectel EC20 NMEA GPS interface found\n");
208 break;
209 case 2:
210 case 3:
211 dev_dbg(dev, "Quectel EC20 Modem port found\n");
212 break;
213 case 4:
214
215 altsetting = -1;
216 break;
217 }
218
219 return altsetting;
220 }
221
222 static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
223 {
224 struct usb_host_interface *intf = serial->interface->cur_altsetting;
225 struct device *dev = &serial->dev->dev;
226 int retval = -ENODEV;
227 __u8 nintf;
228 __u8 ifnum;
229 int altsetting = -1;
230 bool sendsetup = false;
231
232
233 if (intf->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC)
234 goto done;
235
236 nintf = serial->dev->actconfig->desc.bNumInterfaces;
237 dev_dbg(dev, "Num Interfaces = %d\n", nintf);
238 ifnum = intf->desc.bInterfaceNumber;
239 dev_dbg(dev, "This Interface = %d\n", ifnum);
240
241 if (nintf == 1) {
242
243
244 if (serial->interface->num_altsetting == 2)
245 intf = &serial->interface->altsetting[1];
246 else if (serial->interface->num_altsetting > 2)
247 goto done;
248
249 if (intf->desc.bNumEndpoints == 2 &&
250 usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) &&
251 usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
252 dev_dbg(dev, "QDL port found\n");
253
254 if (serial->interface->num_altsetting == 1)
255 retval = 0;
256 else
257 altsetting = 1;
258 }
259 goto done;
260
261 }
262
263
264 altsetting = 0;
265
266
267
268
269
270
271 switch (id->driver_info) {
272 case QCSERIAL_G1K:
273
274
275
276
277
278
279
280 if (nintf < 3 || nintf > 4) {
281 dev_err(dev, "unknown number of interfaces: %d\n", nintf);
282 altsetting = -1;
283 goto done;
284 }
285
286 if (ifnum == 0) {
287 dev_dbg(dev, "Gobi 1K DM/DIAG interface found\n");
288 altsetting = 1;
289 } else if (ifnum == 2)
290 dev_dbg(dev, "Modem port found\n");
291 else
292 altsetting = -1;
293 break;
294 case QCSERIAL_G2K:
295
296 if (nintf == 5 && id->idProduct == QUECTEL_EC20_PID) {
297 altsetting = handle_quectel_ec20(dev, ifnum);
298 goto done;
299 }
300
301
302
303
304
305
306
307
308 if (nintf < 3 || nintf > 4) {
309 dev_err(dev, "unknown number of interfaces: %d\n", nintf);
310 altsetting = -1;
311 goto done;
312 }
313
314 switch (ifnum) {
315 case 0:
316
317 altsetting = -1;
318 break;
319 case 1:
320 dev_dbg(dev, "Gobi 2K+ DM/DIAG interface found\n");
321 break;
322 case 2:
323 dev_dbg(dev, "Modem port found\n");
324 break;
325 case 3:
326
327
328
329
330
331 dev_dbg(dev, "Gobi 2K+ NMEA GPS interface found\n");
332 break;
333 }
334 break;
335 case QCSERIAL_SWI:
336
337
338
339
340
341
342
343 switch (ifnum) {
344 case 0:
345 dev_dbg(dev, "DM/DIAG interface found\n");
346 break;
347 case 2:
348 dev_dbg(dev, "NMEA GPS interface found\n");
349 sendsetup = true;
350 break;
351 case 3:
352 dev_dbg(dev, "Modem port found\n");
353 sendsetup = true;
354 break;
355 default:
356
357 altsetting = -1;
358 break;
359 }
360 break;
361 case QCSERIAL_HWI:
362
363
364
365
366
367
368
369
370
371
372 switch (intf->desc.bInterfaceProtocol) {
373
374 case 0x07:
375 case 0x37:
376 case 0x67:
377
378 case 0x08:
379 case 0x38:
380 case 0x68:
381
382 case 0x09:
383 case 0x39:
384 case 0x69:
385
386 case 0x16:
387 case 0x46:
388 case 0x76:
389 altsetting = -1;
390 break;
391 default:
392 dev_dbg(dev, "Huawei type serial port found (%02x/%02x/%02x)\n",
393 intf->desc.bInterfaceClass,
394 intf->desc.bInterfaceSubClass,
395 intf->desc.bInterfaceProtocol);
396 }
397 break;
398 default:
399 dev_err(dev, "unsupported device layout type: %lu\n",
400 id->driver_info);
401 break;
402 }
403
404 done:
405 if (altsetting >= 0) {
406 retval = usb_set_interface(serial->dev, ifnum, altsetting);
407 if (retval < 0) {
408 dev_err(dev,
409 "Could not set interface, error %d\n",
410 retval);
411 retval = -ENODEV;
412 }
413 }
414
415 if (!retval)
416 usb_set_serial_data(serial, (void *)(unsigned long)sendsetup);
417
418 return retval;
419 }
420
421 static int qc_attach(struct usb_serial *serial)
422 {
423 struct usb_wwan_intf_private *data;
424 bool sendsetup;
425
426 data = kzalloc(sizeof(*data), GFP_KERNEL);
427 if (!data)
428 return -ENOMEM;
429
430 sendsetup = !!(unsigned long)(usb_get_serial_data(serial));
431 if (sendsetup)
432 data->use_send_setup = 1;
433
434 spin_lock_init(&data->susp_lock);
435
436 usb_set_serial_data(serial, data);
437
438 return 0;
439 }
440
441 static void qc_release(struct usb_serial *serial)
442 {
443 struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
444
445 usb_set_serial_data(serial, NULL);
446 kfree(priv);
447 }
448
449 static struct usb_serial_driver qcdevice = {
450 .driver = {
451 .owner = THIS_MODULE,
452 .name = "qcserial",
453 },
454 .description = "Qualcomm USB modem",
455 .id_table = id_table,
456 .num_ports = 1,
457 .probe = qcprobe,
458 .open = usb_wwan_open,
459 .close = usb_wwan_close,
460 .dtr_rts = usb_wwan_dtr_rts,
461 .write = usb_wwan_write,
462 .write_room = usb_wwan_write_room,
463 .chars_in_buffer = usb_wwan_chars_in_buffer,
464 .tiocmget = usb_wwan_tiocmget,
465 .tiocmset = usb_wwan_tiocmset,
466 .attach = qc_attach,
467 .release = qc_release,
468 .port_probe = usb_wwan_port_probe,
469 .port_remove = usb_wwan_port_remove,
470 #ifdef CONFIG_PM
471 .suspend = usb_wwan_suspend,
472 .resume = usb_wwan_resume,
473 #endif
474 };
475
476 static struct usb_serial_driver * const serial_drivers[] = {
477 &qcdevice, NULL
478 };
479
480 module_usb_serial_driver(serial_drivers, id_table);
481
482 MODULE_AUTHOR(DRIVER_AUTHOR);
483 MODULE_DESCRIPTION(DRIVER_DESC);
484 MODULE_LICENSE("GPL v2");