This source file includes following definitions.
- belkin_sa_port_probe
- belkin_sa_port_remove
- belkin_sa_open
- belkin_sa_close
- belkin_sa_read_int_callback
- belkin_sa_process_read_urb
- belkin_sa_set_termios
- belkin_sa_break_ctl
- belkin_sa_tiocmget
- belkin_sa_tiocmset
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22 #include <linux/kernel.h>
23 #include <linux/errno.h>
24 #include <linux/slab.h>
25 #include <linux/tty.h>
26 #include <linux/tty_driver.h>
27 #include <linux/tty_flip.h>
28 #include <linux/module.h>
29 #include <linux/spinlock.h>
30 #include <linux/uaccess.h>
31 #include <linux/usb.h>
32 #include <linux/usb/serial.h>
33 #include "belkin_sa.h"
34
35 #define DRIVER_AUTHOR "William Greathouse <wgreathouse@smva.com>"
36 #define DRIVER_DESC "USB Belkin Serial converter driver"
37
38
39 static int belkin_sa_port_probe(struct usb_serial_port *port);
40 static int belkin_sa_port_remove(struct usb_serial_port *port);
41 static int belkin_sa_open(struct tty_struct *tty,
42 struct usb_serial_port *port);
43 static void belkin_sa_close(struct usb_serial_port *port);
44 static void belkin_sa_read_int_callback(struct urb *urb);
45 static void belkin_sa_process_read_urb(struct urb *urb);
46 static void belkin_sa_set_termios(struct tty_struct *tty,
47 struct usb_serial_port *port, struct ktermios * old);
48 static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state);
49 static int belkin_sa_tiocmget(struct tty_struct *tty);
50 static int belkin_sa_tiocmset(struct tty_struct *tty,
51 unsigned int set, unsigned int clear);
52
53
54 static const struct usb_device_id id_table[] = {
55 { USB_DEVICE(BELKIN_SA_VID, BELKIN_SA_PID) },
56 { USB_DEVICE(BELKIN_OLD_VID, BELKIN_OLD_PID) },
57 { USB_DEVICE(PERACOM_VID, PERACOM_PID) },
58 { USB_DEVICE(GOHUBS_VID, GOHUBS_PID) },
59 { USB_DEVICE(GOHUBS_VID, HANDYLINK_PID) },
60 { USB_DEVICE(BELKIN_DOCKSTATION_VID, BELKIN_DOCKSTATION_PID) },
61 { }
62 };
63 MODULE_DEVICE_TABLE(usb, id_table);
64
65
66 static struct usb_serial_driver belkin_device = {
67 .driver = {
68 .owner = THIS_MODULE,
69 .name = "belkin",
70 },
71 .description = "Belkin / Peracom / GoHubs USB Serial Adapter",
72 .id_table = id_table,
73 .num_ports = 1,
74 .open = belkin_sa_open,
75 .close = belkin_sa_close,
76 .read_int_callback = belkin_sa_read_int_callback,
77 .process_read_urb = belkin_sa_process_read_urb,
78 .set_termios = belkin_sa_set_termios,
79 .break_ctl = belkin_sa_break_ctl,
80 .tiocmget = belkin_sa_tiocmget,
81 .tiocmset = belkin_sa_tiocmset,
82 .port_probe = belkin_sa_port_probe,
83 .port_remove = belkin_sa_port_remove,
84 };
85
86 static struct usb_serial_driver * const serial_drivers[] = {
87 &belkin_device, NULL
88 };
89
90 struct belkin_sa_private {
91 spinlock_t lock;
92 unsigned long control_state;
93 unsigned char last_lsr;
94 unsigned char last_msr;
95 int bad_flow_control;
96 };
97
98
99
100
101
102
103
104
105 #define WDR_TIMEOUT 5000
106
107
108 #define BSA_USB_CMD(c, v) usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), \
109 (c), BELKIN_SA_SET_REQUEST_TYPE, \
110 (v), 0, NULL, 0, WDR_TIMEOUT)
111
112 static int belkin_sa_port_probe(struct usb_serial_port *port)
113 {
114 struct usb_device *dev = port->serial->dev;
115 struct belkin_sa_private *priv;
116
117 priv = kmalloc(sizeof(struct belkin_sa_private), GFP_KERNEL);
118 if (!priv)
119 return -ENOMEM;
120
121 spin_lock_init(&priv->lock);
122 priv->control_state = 0;
123 priv->last_lsr = 0;
124 priv->last_msr = 0;
125
126 priv->bad_flow_control =
127 (le16_to_cpu(dev->descriptor.bcdDevice) <= 0x0206) ? 1 : 0;
128 dev_info(&dev->dev, "bcdDevice: %04x, bfc: %d\n",
129 le16_to_cpu(dev->descriptor.bcdDevice),
130 priv->bad_flow_control);
131
132 usb_set_serial_port_data(port, priv);
133
134 return 0;
135 }
136
137 static int belkin_sa_port_remove(struct usb_serial_port *port)
138 {
139 struct belkin_sa_private *priv;
140
141 priv = usb_get_serial_port_data(port);
142 kfree(priv);
143
144 return 0;
145 }
146
147 static int belkin_sa_open(struct tty_struct *tty,
148 struct usb_serial_port *port)
149 {
150 int retval;
151
152 retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
153 if (retval) {
154 dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
155 return retval;
156 }
157
158 retval = usb_serial_generic_open(tty, port);
159 if (retval)
160 usb_kill_urb(port->interrupt_in_urb);
161
162 return retval;
163 }
164
165 static void belkin_sa_close(struct usb_serial_port *port)
166 {
167 usb_serial_generic_close(port);
168 usb_kill_urb(port->interrupt_in_urb);
169 }
170
171 static void belkin_sa_read_int_callback(struct urb *urb)
172 {
173 struct usb_serial_port *port = urb->context;
174 struct belkin_sa_private *priv;
175 unsigned char *data = urb->transfer_buffer;
176 int retval;
177 int status = urb->status;
178 unsigned long flags;
179
180 switch (status) {
181 case 0:
182
183 break;
184 case -ECONNRESET:
185 case -ENOENT:
186 case -ESHUTDOWN:
187
188 dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
189 __func__, status);
190 return;
191 default:
192 dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
193 __func__, status);
194 goto exit;
195 }
196
197 usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
198
199
200
201
202 priv = usb_get_serial_port_data(port);
203 spin_lock_irqsave(&priv->lock, flags);
204 priv->last_msr = data[BELKIN_SA_MSR_INDEX];
205
206
207 if (priv->last_msr & BELKIN_SA_MSR_DSR)
208 priv->control_state |= TIOCM_DSR;
209 else
210 priv->control_state &= ~TIOCM_DSR;
211
212 if (priv->last_msr & BELKIN_SA_MSR_CTS)
213 priv->control_state |= TIOCM_CTS;
214 else
215 priv->control_state &= ~TIOCM_CTS;
216
217 if (priv->last_msr & BELKIN_SA_MSR_RI)
218 priv->control_state |= TIOCM_RI;
219 else
220 priv->control_state &= ~TIOCM_RI;
221
222 if (priv->last_msr & BELKIN_SA_MSR_CD)
223 priv->control_state |= TIOCM_CD;
224 else
225 priv->control_state &= ~TIOCM_CD;
226
227 priv->last_lsr = data[BELKIN_SA_LSR_INDEX];
228 spin_unlock_irqrestore(&priv->lock, flags);
229 exit:
230 retval = usb_submit_urb(urb, GFP_ATOMIC);
231 if (retval)
232 dev_err(&port->dev, "%s - usb_submit_urb failed with "
233 "result %d\n", __func__, retval);
234 }
235
236 static void belkin_sa_process_read_urb(struct urb *urb)
237 {
238 struct usb_serial_port *port = urb->context;
239 struct belkin_sa_private *priv = usb_get_serial_port_data(port);
240 unsigned char *data = urb->transfer_buffer;
241 unsigned long flags;
242 unsigned char status;
243 char tty_flag;
244
245
246 tty_flag = TTY_NORMAL;
247
248 spin_lock_irqsave(&priv->lock, flags);
249 status = priv->last_lsr;
250 priv->last_lsr &= ~BELKIN_SA_LSR_ERR;
251 spin_unlock_irqrestore(&priv->lock, flags);
252
253 if (!urb->actual_length)
254 return;
255
256 if (status & BELKIN_SA_LSR_ERR) {
257
258
259 if (status & BELKIN_SA_LSR_BI)
260 tty_flag = TTY_BREAK;
261 else if (status & BELKIN_SA_LSR_PE)
262 tty_flag = TTY_PARITY;
263 else if (status & BELKIN_SA_LSR_FE)
264 tty_flag = TTY_FRAME;
265 dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag);
266
267
268 if (status & BELKIN_SA_LSR_OE)
269 tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
270 }
271
272 tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag,
273 urb->actual_length);
274 tty_flip_buffer_push(&port->port);
275 }
276
277 static void belkin_sa_set_termios(struct tty_struct *tty,
278 struct usb_serial_port *port, struct ktermios *old_termios)
279 {
280 struct usb_serial *serial = port->serial;
281 struct belkin_sa_private *priv = usb_get_serial_port_data(port);
282 unsigned int iflag;
283 unsigned int cflag;
284 unsigned int old_iflag = 0;
285 unsigned int old_cflag = 0;
286 __u16 urb_value = 0;
287 unsigned long flags;
288 unsigned long control_state;
289 int bad_flow_control;
290 speed_t baud;
291 struct ktermios *termios = &tty->termios;
292
293 iflag = termios->c_iflag;
294 cflag = termios->c_cflag;
295
296 termios->c_cflag &= ~CMSPAR;
297
298
299 spin_lock_irqsave(&priv->lock, flags);
300 control_state = priv->control_state;
301 bad_flow_control = priv->bad_flow_control;
302 spin_unlock_irqrestore(&priv->lock, flags);
303
304 old_iflag = old_termios->c_iflag;
305 old_cflag = old_termios->c_cflag;
306
307
308 if ((cflag & CBAUD) != (old_cflag & CBAUD)) {
309
310 if ((old_cflag & CBAUD) == B0) {
311 control_state |= (TIOCM_DTR|TIOCM_RTS);
312 if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 1) < 0)
313 dev_err(&port->dev, "Set DTR error\n");
314
315 if (!(old_cflag & CRTSCTS))
316 if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST
317 , 1) < 0)
318 dev_err(&port->dev, "Set RTS error\n");
319 }
320 }
321
322 baud = tty_get_baud_rate(tty);
323 if (baud) {
324 urb_value = BELKIN_SA_BAUD(baud);
325
326 if (urb_value == 0)
327 urb_value = 1;
328
329 baud = BELKIN_SA_BAUD(urb_value);
330
331
332 tty_encode_baud_rate(tty, baud, baud);
333 if (BSA_USB_CMD(BELKIN_SA_SET_BAUDRATE_REQUEST, urb_value) < 0)
334 dev_err(&port->dev, "Set baudrate error\n");
335 } else {
336
337 if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST,
338 BELKIN_SA_FLOW_NONE) < 0)
339 dev_err(&port->dev, "Disable flowcontrol error\n");
340
341 control_state &= ~(TIOCM_DTR | TIOCM_RTS);
342 if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 0) < 0)
343 dev_err(&port->dev, "DTR LOW error\n");
344 if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, 0) < 0)
345 dev_err(&port->dev, "RTS LOW error\n");
346 }
347
348
349 if ((cflag ^ old_cflag) & (PARENB | PARODD)) {
350 if (cflag & PARENB)
351 urb_value = (cflag & PARODD) ? BELKIN_SA_PARITY_ODD
352 : BELKIN_SA_PARITY_EVEN;
353 else
354 urb_value = BELKIN_SA_PARITY_NONE;
355 if (BSA_USB_CMD(BELKIN_SA_SET_PARITY_REQUEST, urb_value) < 0)
356 dev_err(&port->dev, "Set parity error\n");
357 }
358
359
360 if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
361 switch (cflag & CSIZE) {
362 case CS5:
363 urb_value = BELKIN_SA_DATA_BITS(5);
364 break;
365 case CS6:
366 urb_value = BELKIN_SA_DATA_BITS(6);
367 break;
368 case CS7:
369 urb_value = BELKIN_SA_DATA_BITS(7);
370 break;
371 case CS8:
372 urb_value = BELKIN_SA_DATA_BITS(8);
373 break;
374 default:
375 dev_dbg(&port->dev,
376 "CSIZE was not CS5-CS8, using default of 8\n");
377 urb_value = BELKIN_SA_DATA_BITS(8);
378 break;
379 }
380 if (BSA_USB_CMD(BELKIN_SA_SET_DATA_BITS_REQUEST, urb_value) < 0)
381 dev_err(&port->dev, "Set data bits error\n");
382 }
383
384
385 if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
386 urb_value = (cflag & CSTOPB) ? BELKIN_SA_STOP_BITS(2)
387 : BELKIN_SA_STOP_BITS(1);
388 if (BSA_USB_CMD(BELKIN_SA_SET_STOP_BITS_REQUEST,
389 urb_value) < 0)
390 dev_err(&port->dev, "Set stop bits error\n");
391 }
392
393
394 if (((iflag ^ old_iflag) & (IXOFF | IXON)) ||
395 ((cflag ^ old_cflag) & CRTSCTS)) {
396 urb_value = 0;
397 if ((iflag & IXOFF) || (iflag & IXON))
398 urb_value |= (BELKIN_SA_FLOW_OXON | BELKIN_SA_FLOW_IXON);
399 else
400 urb_value &= ~(BELKIN_SA_FLOW_OXON | BELKIN_SA_FLOW_IXON);
401
402 if (cflag & CRTSCTS)
403 urb_value |= (BELKIN_SA_FLOW_OCTS | BELKIN_SA_FLOW_IRTS);
404 else
405 urb_value &= ~(BELKIN_SA_FLOW_OCTS | BELKIN_SA_FLOW_IRTS);
406
407 if (bad_flow_control)
408 urb_value &= ~(BELKIN_SA_FLOW_IRTS);
409
410 if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST, urb_value) < 0)
411 dev_err(&port->dev, "Set flow control error\n");
412 }
413
414
415 spin_lock_irqsave(&priv->lock, flags);
416 priv->control_state = control_state;
417 spin_unlock_irqrestore(&priv->lock, flags);
418 }
419
420 static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state)
421 {
422 struct usb_serial_port *port = tty->driver_data;
423 struct usb_serial *serial = port->serial;
424
425 if (BSA_USB_CMD(BELKIN_SA_SET_BREAK_REQUEST, break_state ? 1 : 0) < 0)
426 dev_err(&port->dev, "Set break_ctl %d\n", break_state);
427 }
428
429 static int belkin_sa_tiocmget(struct tty_struct *tty)
430 {
431 struct usb_serial_port *port = tty->driver_data;
432 struct belkin_sa_private *priv = usb_get_serial_port_data(port);
433 unsigned long control_state;
434 unsigned long flags;
435
436 spin_lock_irqsave(&priv->lock, flags);
437 control_state = priv->control_state;
438 spin_unlock_irqrestore(&priv->lock, flags);
439
440 return control_state;
441 }
442
443 static int belkin_sa_tiocmset(struct tty_struct *tty,
444 unsigned int set, unsigned int clear)
445 {
446 struct usb_serial_port *port = tty->driver_data;
447 struct usb_serial *serial = port->serial;
448 struct belkin_sa_private *priv = usb_get_serial_port_data(port);
449 unsigned long control_state;
450 unsigned long flags;
451 int retval;
452 int rts = 0;
453 int dtr = 0;
454
455 spin_lock_irqsave(&priv->lock, flags);
456 control_state = priv->control_state;
457
458 if (set & TIOCM_RTS) {
459 control_state |= TIOCM_RTS;
460 rts = 1;
461 }
462 if (set & TIOCM_DTR) {
463 control_state |= TIOCM_DTR;
464 dtr = 1;
465 }
466 if (clear & TIOCM_RTS) {
467 control_state &= ~TIOCM_RTS;
468 rts = 0;
469 }
470 if (clear & TIOCM_DTR) {
471 control_state &= ~TIOCM_DTR;
472 dtr = 0;
473 }
474
475 priv->control_state = control_state;
476 spin_unlock_irqrestore(&priv->lock, flags);
477
478 retval = BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, rts);
479 if (retval < 0) {
480 dev_err(&port->dev, "Set RTS error %d\n", retval);
481 goto exit;
482 }
483
484 retval = BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, dtr);
485 if (retval < 0) {
486 dev_err(&port->dev, "Set DTR error %d\n", retval);
487 goto exit;
488 }
489 exit:
490 return retval;
491 }
492
493 module_usb_serial_driver(serial_drivers, id_table);
494
495 MODULE_AUTHOR(DRIVER_AUTHOR);
496 MODULE_DESCRIPTION(DRIVER_DESC);
497 MODULE_LICENSE("GPL");