root/drivers/usb/storage/debug.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. usb_stor_show_command
  2. usb_stor_show_sense
  3. usb_stor_dbg

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Driver for USB Mass Storage compliant devices
   4  * Debugging Functions Source Code File
   5  *
   6  * Current development and maintenance by:
   7  *   (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
   8  *
   9  * Developed with the assistance of:
  10  *   (c) 2002 Alan Stern <stern@rowland.org>
  11  *
  12  * Initial work by:
  13  *   (c) 1999 Michael Gee (michael@linuxspecific.com)
  14  *
  15  * This driver is based on the 'USB Mass Storage Class' document. This
  16  * describes in detail the protocol used to communicate with such
  17  * devices.  Clearly, the designers had SCSI and ATAPI commands in
  18  * mind when they created this document.  The commands are all very
  19  * similar to commands in the SCSI-II and ATAPI specifications.
  20  *
  21  * It is important to note that in a number of cases this class
  22  * exhibits class-specific exemptions from the USB specification.
  23  * Notably the usage of NAK, STALL and ACK differs from the norm, in
  24  * that they are used to communicate wait, failed and OK on commands.
  25  *
  26  * Also, for certain devices, the interrupt endpoint is used to convey
  27  * status of a command.
  28  */
  29 
  30 #include <linux/device.h>
  31 #include <linux/cdrom.h>
  32 #include <linux/export.h>
  33 #include <scsi/scsi.h>
  34 #include <scsi/scsi_cmnd.h>
  35 #include <scsi/scsi_dbg.h>
  36 
  37 #include "usb.h"
  38 #include "debug.h"
  39 #include "scsi.h"
  40 
  41 
  42 void usb_stor_show_command(const struct us_data *us, struct scsi_cmnd *srb)
  43 {
  44         char *what = NULL;
  45 
  46         switch (srb->cmnd[0]) {
  47         case TEST_UNIT_READY: what = "TEST_UNIT_READY"; break;
  48         case REZERO_UNIT: what = "REZERO_UNIT"; break;
  49         case REQUEST_SENSE: what = "REQUEST_SENSE"; break;
  50         case FORMAT_UNIT: what = "FORMAT_UNIT"; break;
  51         case READ_BLOCK_LIMITS: what = "READ_BLOCK_LIMITS"; break;
  52         case REASSIGN_BLOCKS: what = "REASSIGN_BLOCKS"; break;
  53         case READ_6: what = "READ_6"; break;
  54         case WRITE_6: what = "WRITE_6"; break;
  55         case SEEK_6: what = "SEEK_6"; break;
  56         case READ_REVERSE: what = "READ_REVERSE"; break;
  57         case WRITE_FILEMARKS: what = "WRITE_FILEMARKS"; break;
  58         case SPACE: what = "SPACE"; break;
  59         case INQUIRY: what = "INQUIRY"; break;
  60         case RECOVER_BUFFERED_DATA: what = "RECOVER_BUFFERED_DATA"; break;
  61         case MODE_SELECT: what = "MODE_SELECT"; break;
  62         case RESERVE: what = "RESERVE"; break;
  63         case RELEASE: what = "RELEASE"; break;
  64         case COPY: what = "COPY"; break;
  65         case ERASE: what = "ERASE"; break;
  66         case MODE_SENSE: what = "MODE_SENSE"; break;
  67         case START_STOP: what = "START_STOP"; break;
  68         case RECEIVE_DIAGNOSTIC: what = "RECEIVE_DIAGNOSTIC"; break;
  69         case SEND_DIAGNOSTIC: what = "SEND_DIAGNOSTIC"; break;
  70         case ALLOW_MEDIUM_REMOVAL: what = "ALLOW_MEDIUM_REMOVAL"; break;
  71         case SET_WINDOW: what = "SET_WINDOW"; break;
  72         case READ_CAPACITY: what = "READ_CAPACITY"; break;
  73         case READ_10: what = "READ_10"; break;
  74         case WRITE_10: what = "WRITE_10"; break;
  75         case SEEK_10: what = "SEEK_10"; break;
  76         case WRITE_VERIFY: what = "WRITE_VERIFY"; break;
  77         case VERIFY: what = "VERIFY"; break;
  78         case SEARCH_HIGH: what = "SEARCH_HIGH"; break;
  79         case SEARCH_EQUAL: what = "SEARCH_EQUAL"; break;
  80         case SEARCH_LOW: what = "SEARCH_LOW"; break;
  81         case SET_LIMITS: what = "SET_LIMITS"; break;
  82         case READ_POSITION: what = "READ_POSITION"; break;
  83         case SYNCHRONIZE_CACHE: what = "SYNCHRONIZE_CACHE"; break;
  84         case LOCK_UNLOCK_CACHE: what = "LOCK_UNLOCK_CACHE"; break;
  85         case READ_DEFECT_DATA: what = "READ_DEFECT_DATA"; break;
  86         case MEDIUM_SCAN: what = "MEDIUM_SCAN"; break;
  87         case COMPARE: what = "COMPARE"; break;
  88         case COPY_VERIFY: what = "COPY_VERIFY"; break;
  89         case WRITE_BUFFER: what = "WRITE_BUFFER"; break;
  90         case READ_BUFFER: what = "READ_BUFFER"; break;
  91         case UPDATE_BLOCK: what = "UPDATE_BLOCK"; break;
  92         case READ_LONG: what = "READ_LONG"; break;
  93         case WRITE_LONG: what = "WRITE_LONG"; break;
  94         case CHANGE_DEFINITION: what = "CHANGE_DEFINITION"; break;
  95         case WRITE_SAME: what = "WRITE_SAME"; break;
  96         case GPCMD_READ_SUBCHANNEL: what = "READ SUBCHANNEL"; break;
  97         case READ_TOC: what = "READ_TOC"; break;
  98         case GPCMD_READ_HEADER: what = "READ HEADER"; break;
  99         case GPCMD_PLAY_AUDIO_10: what = "PLAY AUDIO (10)"; break;
 100         case GPCMD_PLAY_AUDIO_MSF: what = "PLAY AUDIO MSF"; break;
 101         case GPCMD_GET_EVENT_STATUS_NOTIFICATION:
 102                 what = "GET EVENT/STATUS NOTIFICATION"; break;
 103         case GPCMD_PAUSE_RESUME: what = "PAUSE/RESUME"; break;
 104         case LOG_SELECT: what = "LOG_SELECT"; break;
 105         case LOG_SENSE: what = "LOG_SENSE"; break;
 106         case GPCMD_STOP_PLAY_SCAN: what = "STOP PLAY/SCAN"; break;
 107         case GPCMD_READ_DISC_INFO: what = "READ DISC INFORMATION"; break;
 108         case GPCMD_READ_TRACK_RZONE_INFO:
 109                 what = "READ TRACK INFORMATION"; break;
 110         case GPCMD_RESERVE_RZONE_TRACK: what = "RESERVE TRACK"; break;
 111         case GPCMD_SEND_OPC: what = "SEND OPC"; break;
 112         case MODE_SELECT_10: what = "MODE_SELECT_10"; break;
 113         case GPCMD_REPAIR_RZONE_TRACK: what = "REPAIR TRACK"; break;
 114         case 0x59: what = "READ MASTER CUE"; break;
 115         case MODE_SENSE_10: what = "MODE_SENSE_10"; break;
 116         case GPCMD_CLOSE_TRACK: what = "CLOSE TRACK/SESSION"; break;
 117         case 0x5C: what = "READ BUFFER CAPACITY"; break;
 118         case 0x5D: what = "SEND CUE SHEET"; break;
 119         case GPCMD_BLANK: what = "BLANK"; break;
 120         case REPORT_LUNS: what = "REPORT LUNS"; break;
 121         case MOVE_MEDIUM: what = "MOVE_MEDIUM or PLAY AUDIO (12)"; break;
 122         case READ_12: what = "READ_12"; break;
 123         case WRITE_12: what = "WRITE_12"; break;
 124         case WRITE_VERIFY_12: what = "WRITE_VERIFY_12"; break;
 125         case SEARCH_HIGH_12: what = "SEARCH_HIGH_12"; break;
 126         case SEARCH_EQUAL_12: what = "SEARCH_EQUAL_12"; break;
 127         case SEARCH_LOW_12: what = "SEARCH_LOW_12"; break;
 128         case SEND_VOLUME_TAG: what = "SEND_VOLUME_TAG"; break;
 129         case READ_ELEMENT_STATUS: what = "READ_ELEMENT_STATUS"; break;
 130         case GPCMD_READ_CD_MSF: what = "READ CD MSF"; break;
 131         case GPCMD_SCAN: what = "SCAN"; break;
 132         case GPCMD_SET_SPEED: what = "SET CD SPEED"; break;
 133         case GPCMD_MECHANISM_STATUS: what = "MECHANISM STATUS"; break;
 134         case GPCMD_READ_CD: what = "READ CD"; break;
 135         case 0xE1: what = "WRITE CONTINUE"; break;
 136         case WRITE_LONG_2: what = "WRITE_LONG_2"; break;
 137         default: what = "(unknown command)"; break;
 138         }
 139         usb_stor_dbg(us, "Command %s (%d bytes)\n", what, srb->cmd_len);
 140         usb_stor_dbg(us, "bytes: %*ph\n", min_t(int, srb->cmd_len, 16),
 141                      (const unsigned char *)srb->cmnd);
 142 }
 143 
 144 void usb_stor_show_sense(const struct us_data *us,
 145                          unsigned char key,
 146                          unsigned char asc,
 147                          unsigned char ascq)
 148 {
 149         const char *what, *keystr, *fmt;
 150 
 151         keystr = scsi_sense_key_string(key);
 152         what = scsi_extd_sense_format(asc, ascq, &fmt);
 153 
 154         if (keystr == NULL)
 155                 keystr = "(Unknown Key)";
 156         if (what == NULL)
 157                 what = "(unknown ASC/ASCQ)";
 158 
 159         if (fmt)
 160                 usb_stor_dbg(us, "%s: %s (%s%x)\n", keystr, what, fmt, ascq);
 161         else
 162                 usb_stor_dbg(us, "%s: %s\n", keystr, what);
 163 }
 164 
 165 void usb_stor_dbg(const struct us_data *us, const char *fmt, ...)
 166 {
 167         va_list args;
 168 
 169         va_start(args, fmt);
 170 
 171         dev_vprintk_emit(LOGLEVEL_DEBUG, &us->pusb_dev->dev, fmt, args);
 172 
 173         va_end(args);
 174 }
 175 EXPORT_SYMBOL_GPL(usb_stor_dbg);

/* [<][>][^][v][top][bottom][index][help] */