root/drivers/usb/renesas_usbhs/rcar3.c

DEFINITIONS

1. usbhs_write32
2. usbhs_read32
3. usbhs_rcar3_set_ugctrl2
4. usbhs_rcar3_power_ctrl
5. usbhs_rcar3_power_and_pll_ctrl

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Renesas USB driver R-Car Gen. 3 initialization and power control
   4  *
   5  * Copyright (C) 2016-2019 Renesas Electronics Corporation
   6  */
   7 
   8 #include <linux/delay.h>
   9 #include <linux/io.h>
  10 #include "common.h"
  11 #include "rcar3.h"
  12 
  13 #define LPSTS           0x102
  14 #define UGCTRL          0x180   /* 32-bit register */
  15 #define UGCTRL2         0x184   /* 32-bit register */
  16 #define UGSTS           0x188   /* 32-bit register */
  17 
  18 /* Low Power Status register (LPSTS) */
  19 #define LPSTS_SUSPM     0x4000
  20 
  21 /* R-Car D3 only: USB General control register (UGCTRL) */
  22 #define UGCTRL_PLLRESET         0x00000001
  23 #define UGCTRL_CONNECT          0x00000004
  24 
  25 /*
  26  * USB General control register 2 (UGCTRL2)
  27  * Remarks: bit[31:11] and bit[9:6] should be 0
  28  */
  29 #define UGCTRL2_RESERVED_3      0x00000001      /* bit[3:0] should be B'0001 */
  30 #define UGCTRL2_USB0SEL_HSUSB   0x00000020
  31 #define UGCTRL2_USB0SEL_OTG     0x00000030
  32 #define UGCTRL2_VBUSSEL         0x00000400
  33 
  34 /* R-Car D3 only: USB General status register (UGSTS) */
  35 #define UGSTS_LOCK              0x00000100
  36 
  37 static void usbhs_write32(struct usbhs_priv *priv, u32 reg, u32 data)
  38 {
  39         iowrite32(data, priv->base + reg);
  40 }
  41 
  42 static u32 usbhs_read32(struct usbhs_priv *priv, u32 reg)
  43 {
  44         return ioread32(priv->base + reg);
  45 }
  46 
  47 static void usbhs_rcar3_set_ugctrl2(struct usbhs_priv *priv, u32 val)
  48 {
  49         usbhs_write32(priv, UGCTRL2, val | UGCTRL2_RESERVED_3);
  50 }
  51 
  52 static int usbhs_rcar3_power_ctrl(struct platform_device *pdev,
  53                                 void __iomem *base, int enable)
  54 {
  55         struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
  56 
  57         usbhs_rcar3_set_ugctrl2(priv, UGCTRL2_USB0SEL_OTG | UGCTRL2_VBUSSEL);
  58 
  59         if (enable) {
  60                 usbhs_bset(priv, LPSTS, LPSTS_SUSPM, LPSTS_SUSPM);
  61                 /* The controller on R-Car Gen3 needs to wait up to 45 usec */
  62                 usleep_range(45, 90);
  63         } else {
  64                 usbhs_bset(priv, LPSTS, LPSTS_SUSPM, 0);
  65         }
  66 
  67         return 0;
  68 }
  69 
  70 /* R-Car D3 needs to release UGCTRL.PLLRESET */
  71 static int usbhs_rcar3_power_and_pll_ctrl(struct platform_device *pdev,
  72                                           void __iomem *base, int enable)
  73 {
  74         struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
  75         u32 val;
  76         int timeout = 1000;
  77 
  78         if (enable) {
  79                 usbhs_write32(priv, UGCTRL, 0); /* release PLLRESET */
  80                 usbhs_rcar3_set_ugctrl2(priv,
  81                                         UGCTRL2_USB0SEL_OTG | UGCTRL2_VBUSSEL);
  82 
  83                 usbhs_bset(priv, LPSTS, LPSTS_SUSPM, LPSTS_SUSPM);
  84                 do {
  85                         val = usbhs_read32(priv, UGSTS);
  86                         udelay(1);
  87                 } while (!(val & UGSTS_LOCK) && timeout--);
  88                 usbhs_write32(priv, UGCTRL, UGCTRL_CONNECT);
  89         } else {
  90                 usbhs_write32(priv, UGCTRL, 0);
  91                 usbhs_bset(priv, LPSTS, LPSTS_SUSPM, 0);
  92                 usbhs_write32(priv, UGCTRL, UGCTRL_PLLRESET);
  93         }
  94 
  95         return 0;
  96 }
  97 
  98 const struct renesas_usbhs_platform_info usbhs_rcar_gen3_plat_info = {
  99         .platform_callback = {
 100                 .power_ctrl = usbhs_rcar3_power_ctrl,
 101                 .get_id = usbhs_get_id_as_gadget,
 102         },
 103         .driver_param = {
 104                 .has_usb_dmac = 1,
 105                 .multi_clks = 1,
 106                 .has_new_pipe_configs = 1,
 107         },
 108 };
 109 
 110 const struct renesas_usbhs_platform_info usbhs_rcar_gen3_with_pll_plat_info = {
 111         .platform_callback = {
 112                 .power_ctrl = usbhs_rcar3_power_and_pll_ctrl,
 113                 .get_id = usbhs_get_id_as_gadget,
 114         },
 115         .driver_param = {
 116                 .has_usb_dmac = 1,
 117                 .multi_clks = 1,
 118                 .has_new_pipe_configs = 1,
 119         },
 120 };