root/drivers/thunderbolt/nhi_ops.c

DEFINITIONS

1. check_for_device
2. icl_nhi_is_device_connected
3. icl_nhi_force_power
4. icl_nhi_lc_mailbox_cmd
5. icl_nhi_lc_mailbox_cmd_complete
6. icl_nhi_set_ltr
7. icl_nhi_suspend
8. icl_nhi_suspend_noirq
9. icl_nhi_resume
10. icl_nhi_shutdown

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * NHI specific operations
   4  *
   5  * Copyright (C) 2019, Intel Corporation
   6  * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
   7  */
   8 
   9 #include <linux/delay.h>
  10 #include <linux/suspend.h>
  11 
  12 #include "nhi.h"
  13 #include "nhi_regs.h"
  14 #include "tb.h"
  15 
  16 /* Ice Lake specific NHI operations */
  17 
  18 #define ICL_LC_MAILBOX_TIMEOUT  500 /* ms */
  19 
  20 static int check_for_device(struct device *dev, void *data)
  21 {
  22         return tb_is_switch(dev);
  23 }
  24 
  25 static bool icl_nhi_is_device_connected(struct tb_nhi *nhi)
  26 {
  27         struct tb *tb = pci_get_drvdata(nhi->pdev);
  28         int ret;
  29 
  30         ret = device_for_each_child(&tb->root_switch->dev, NULL,
  31                                     check_for_device);
  32         return ret > 0;
  33 }
  34 
  35 static int icl_nhi_force_power(struct tb_nhi *nhi, bool power)
  36 {
  37         u32 vs_cap;
  38 
  39         /*
  40          * The Thunderbolt host controller is present always in Ice Lake
  41          * but the firmware may not be loaded and running (depending
  42          * whether there is device connected and so on). Each time the
  43          * controller is used we need to "Force Power" it first and wait
  44          * for the firmware to indicate it is up and running. This "Force
  45          * Power" is really not about actually powering on/off the
  46          * controller so it is accessible even if "Force Power" is off.
  47          *
  48          * The actual power management happens inside shared ACPI power
  49          * resources using standard ACPI methods.
  50          */
  51         pci_read_config_dword(nhi->pdev, VS_CAP_22, &vs_cap);
  52         if (power) {
  53                 vs_cap &= ~VS_CAP_22_DMA_DELAY_MASK;
  54                 vs_cap |= 0x22 << VS_CAP_22_DMA_DELAY_SHIFT;
  55                 vs_cap |= VS_CAP_22_FORCE_POWER;
  56         } else {
  57                 vs_cap &= ~VS_CAP_22_FORCE_POWER;
  58         }
  59         pci_write_config_dword(nhi->pdev, VS_CAP_22, vs_cap);
  60 
  61         if (power) {
  62                 unsigned int retries = 10;
  63                 u32 val;
  64 
  65                 /* Wait until the firmware tells it is up and running */
  66                 do {
  67                         pci_read_config_dword(nhi->pdev, VS_CAP_9, &val);
  68                         if (val & VS_CAP_9_FW_READY)
  69                                 return 0;
  70                         msleep(250);
  71                 } while (--retries);
  72 
  73                 return -ETIMEDOUT;
  74         }
  75 
  76         return 0;
  77 }
  78 
  79 static void icl_nhi_lc_mailbox_cmd(struct tb_nhi *nhi, enum icl_lc_mailbox_cmd cmd)
  80 {
  81         u32 data;
  82 
  83         data = (cmd << VS_CAP_19_CMD_SHIFT) & VS_CAP_19_CMD_MASK;
  84         pci_write_config_dword(nhi->pdev, VS_CAP_19, data | VS_CAP_19_VALID);
  85 }
  86 
  87 static int icl_nhi_lc_mailbox_cmd_complete(struct tb_nhi *nhi, int timeout)
  88 {
  89         unsigned long end;
  90         u32 data;
  91 
  92         if (!timeout)
  93                 goto clear;
  94 
  95         end = jiffies + msecs_to_jiffies(timeout);
  96         do {
  97                 pci_read_config_dword(nhi->pdev, VS_CAP_18, &data);
  98                 if (data & VS_CAP_18_DONE)
  99                         goto clear;
 100                 msleep(100);
 101         } while (time_before(jiffies, end));
 102 
 103         return -ETIMEDOUT;
 104 
 105 clear:
 106         /* Clear the valid bit */
 107         pci_write_config_dword(nhi->pdev, VS_CAP_19, 0);
 108         return 0;
 109 }
 110 
 111 static void icl_nhi_set_ltr(struct tb_nhi *nhi)
 112 {
 113         u32 max_ltr, ltr;
 114 
 115         pci_read_config_dword(nhi->pdev, VS_CAP_16, &max_ltr);
 116         max_ltr &= 0xffff;
 117         /* Program the same value for both snoop and no-snoop */
 118         ltr = max_ltr << 16 | max_ltr;
 119         pci_write_config_dword(nhi->pdev, VS_CAP_15, ltr);
 120 }
 121 
 122 static int icl_nhi_suspend(struct tb_nhi *nhi)
 123 {
 124         int ret;
 125 
 126         if (icl_nhi_is_device_connected(nhi))
 127                 return 0;
 128 
 129         /*
 130          * If there is no device connected we need to perform both: a
 131          * handshake through LC mailbox and force power down before
 132          * entering D3.
 133          */
 134         icl_nhi_lc_mailbox_cmd(nhi, ICL_LC_PREPARE_FOR_RESET);
 135         ret = icl_nhi_lc_mailbox_cmd_complete(nhi, ICL_LC_MAILBOX_TIMEOUT);
 136         if (ret)
 137                 return ret;
 138 
 139         return icl_nhi_force_power(nhi, false);
 140 }
 141 
 142 static int icl_nhi_suspend_noirq(struct tb_nhi *nhi, bool wakeup)
 143 {
 144         enum icl_lc_mailbox_cmd cmd;
 145 
 146         if (!pm_suspend_via_firmware())
 147                 return icl_nhi_suspend(nhi);
 148 
 149         cmd = wakeup ? ICL_LC_GO2SX : ICL_LC_GO2SX_NO_WAKE;
 150         icl_nhi_lc_mailbox_cmd(nhi, cmd);
 151         return icl_nhi_lc_mailbox_cmd_complete(nhi, ICL_LC_MAILBOX_TIMEOUT);
 152 }
 153 
 154 static int icl_nhi_resume(struct tb_nhi *nhi)
 155 {
 156         int ret;
 157 
 158         ret = icl_nhi_force_power(nhi, true);
 159         if (ret)
 160                 return ret;
 161 
 162         icl_nhi_set_ltr(nhi);
 163         return 0;
 164 }
 165 
 166 static void icl_nhi_shutdown(struct tb_nhi *nhi)
 167 {
 168         icl_nhi_force_power(nhi, false);
 169 }
 170 
 171 const struct tb_nhi_ops icl_nhi_ops = {
 172         .init = icl_nhi_resume,
 173         .suspend_noirq = icl_nhi_suspend_noirq,
 174         .resume_noirq = icl_nhi_resume,
 175         .runtime_suspend = icl_nhi_suspend,
 176         .runtime_resume = icl_nhi_resume,
 177         .shutdown = icl_nhi_shutdown,
 178 };