drivers/mtd/devices/block2mtd.c

/* [<][>][^][v][top][bottom][index][help] */
This source file includes following definitions.
page_read
_block2mtd_erase
block2mtd_erase
block2mtd_read
_block2mtd_write
block2mtd_write
block2mtd_sync
block2mtd_free_device
add_device
ustrtoul
parse_num
kill_final_newline
block2mtd_setup2
block2mtd_setup
block2mtd_init
block2mtd_exit
   1 /*
   2  * block2mtd.c - create an mtd from a block device
   3  *
   4  * Copyright (C) 2001,2002      Simon Evans <spse@secret.org.uk>
   5  * Copyright (C) 2004-2006      Joern Engel <joern@wh.fh-wedel.de>
   6  *
   7  * Licence: GPL
   8  */
   9 
  10 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  11 
  12 /*
  13  * When the first attempt at device initialization fails, we may need to
  14  * wait a little bit and retry. This timeout, by default 3 seconds, gives
  15  * device time to start up. Required on BCM2708 and a few other chipsets.
  16  */
  17 #define MTD_DEFAULT_TIMEOUT     3
  18 
  19 #include <linux/module.h>
  20 #include <linux/delay.h>
  21 #include <linux/fs.h>
  22 #include <linux/blkdev.h>
  23 #include <linux/backing-dev.h>
  24 #include <linux/bio.h>
  25 #include <linux/pagemap.h>
  26 #include <linux/list.h>
  27 #include <linux/init.h>
  28 #include <linux/mtd/mtd.h>
  29 #include <linux/mutex.h>
  30 #include <linux/mount.h>
  31 #include <linux/slab.h>
  32 #include <linux/major.h>
  33 
  34 /* Info for the block device */
  35 struct block2mtd_dev {
  36         struct list_head list;
  37         struct block_device *blkdev;
  38         struct mtd_info mtd;
  39         struct mutex write_mutex;
  40 };
  41 
  42 
  43 /* Static info about the MTD, used in cleanup_module */
  44 static LIST_HEAD(blkmtd_device_list);
  45 
  46 
  47 static struct page *page_read(struct address_space *mapping, int index)
  48 {
  49         return read_mapping_page(mapping, index, NULL);
  50 }
  51 
  52 /* erase a specified part of the device */
  53 static int _block2mtd_erase(struct block2mtd_dev *dev, loff_t to, size_t len)
  54 {
  55         struct address_space *mapping = dev->blkdev->bd_inode->i_mapping;
  56         struct page *page;
  57         int index = to >> PAGE_SHIFT;   // page index
  58         int pages = len >> PAGE_SHIFT;
  59         u_long *p;
  60         u_long *max;
  61 
  62         while (pages) {
  63                 page = page_read(mapping, index);
  64                 if (IS_ERR(page))
  65                         return PTR_ERR(page);
  66 
  67                 max = page_address(page) + PAGE_SIZE;
  68                 for (p=page_address(page); p<max; p++)
  69                         if (*p != -1UL) {
  70                                 lock_page(page);
  71                                 memset(page_address(page), 0xff, PAGE_SIZE);
  72                                 set_page_dirty(page);
  73                                 unlock_page(page);
  74                                 balance_dirty_pages_ratelimited(mapping);
  75                                 break;
  76                         }
  77 
  78                 put_page(page);
  79                 pages--;
  80                 index++;
  81         }
  82         return 0;
  83 }
  84 static int block2mtd_erase(struct mtd_info *mtd, struct erase_info *instr)
  85 {
  86         struct block2mtd_dev *dev = mtd->priv;
  87         size_t from = instr->addr;
  88         size_t len = instr->len;
  89         int err;
  90 
  91         mutex_lock(&dev->write_mutex);
  92         err = _block2mtd_erase(dev, from, len);
  93         mutex_unlock(&dev->write_mutex);
  94         if (err)
  95                 pr_err("erase failed err = %d\n", err);
  96 
  97         return err;
  98 }
  99 
 100 
 101 static int block2mtd_read(struct mtd_info *mtd, loff_t from, size_t len,
 102                 size_t *retlen, u_char *buf)
 103 {
 104         struct block2mtd_dev *dev = mtd->priv;
 105         struct page *page;
 106         int index = from >> PAGE_SHIFT;
 107         int offset = from & (PAGE_SIZE-1);
 108         int cpylen;
 109 
 110         while (len) {
 111                 if ((offset + len) > PAGE_SIZE)
 112                         cpylen = PAGE_SIZE - offset;    // multiple pages
 113                 else
 114                         cpylen = len;   // this page
 115                 len = len - cpylen;
 116 
 117                 page = page_read(dev->blkdev->bd_inode->i_mapping, index);
 118                 if (IS_ERR(page))
 119                         return PTR_ERR(page);
 120 
 121                 memcpy(buf, page_address(page) + offset, cpylen);
 122                 put_page(page);
 123 
 124                 if (retlen)
 125                         *retlen += cpylen;
 126                 buf += cpylen;
 127                 offset = 0;
 128                 index++;
 129         }
 130         return 0;
 131 }
 132 
 133 
 134 /* write data to the underlying device */
 135 static int _block2mtd_write(struct block2mtd_dev *dev, const u_char *buf,
 136                 loff_t to, size_t len, size_t *retlen)
 137 {
 138         struct page *page;
 139         struct address_space *mapping = dev->blkdev->bd_inode->i_mapping;
 140         int index = to >> PAGE_SHIFT;   // page index
 141         int offset = to & ~PAGE_MASK;   // page offset
 142         int cpylen;
 143 
 144         while (len) {
 145                 if ((offset+len) > PAGE_SIZE)
 146                         cpylen = PAGE_SIZE - offset;    // multiple pages
 147                 else
 148                         cpylen = len;                   // this page
 149                 len = len - cpylen;
 150 
 151                 page = page_read(mapping, index);
 152                 if (IS_ERR(page))
 153                         return PTR_ERR(page);
 154 
 155                 if (memcmp(page_address(page)+offset, buf, cpylen)) {
 156                         lock_page(page);
 157                         memcpy(page_address(page) + offset, buf, cpylen);
 158                         set_page_dirty(page);
 159                         unlock_page(page);
 160                         balance_dirty_pages_ratelimited(mapping);
 161                 }
 162                 put_page(page);
 163 
 164                 if (retlen)
 165                         *retlen += cpylen;
 166 
 167                 buf += cpylen;
 168                 offset = 0;
 169                 index++;
 170         }
 171         return 0;
 172 }
 173 
 174 
 175 static int block2mtd_write(struct mtd_info *mtd, loff_t to, size_t len,
 176                 size_t *retlen, const u_char *buf)
 177 {
 178         struct block2mtd_dev *dev = mtd->priv;
 179         int err;
 180 
 181         mutex_lock(&dev->write_mutex);
 182         err = _block2mtd_write(dev, buf, to, len, retlen);
 183         mutex_unlock(&dev->write_mutex);
 184         if (err > 0)
 185                 err = 0;
 186         return err;
 187 }
 188 
 189 
 190 /* sync the device - wait until the write queue is empty */
 191 static void block2mtd_sync(struct mtd_info *mtd)
 192 {
 193         struct block2mtd_dev *dev = mtd->priv;
 194         sync_blockdev(dev->blkdev);
 195         return;
 196 }
 197 
 198 
 199 static void block2mtd_free_device(struct block2mtd_dev *dev)
 200 {
 201         if (!dev)
 202                 return;
 203 
 204         kfree(dev->mtd.name);
 205 
 206         if (dev->blkdev) {
 207                 invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping,
 208                                         0, -1);
 209                 blkdev_put(dev->blkdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL);
 210         }
 211 
 212         kfree(dev);
 213 }
 214 
 215 
 216 static struct block2mtd_dev *add_device(char *devname, int erase_size,
 217                 int timeout)
 218 {
 219 #ifndef MODULE
 220         int i;
 221 #endif
 222         const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL;
 223         struct block_device *bdev;
 224         struct block2mtd_dev *dev;
 225         char *name;
 226 
 227         if (!devname)
 228                 return NULL;
 229 
 230         dev = kzalloc(sizeof(struct block2mtd_dev), GFP_KERNEL);
 231         if (!dev)
 232                 return NULL;
 233 
 234         /* Get a handle on the device */
 235         bdev = blkdev_get_by_path(devname, mode, dev);
 236 
 237 #ifndef MODULE
 238         /*
 239          * We might not have the root device mounted at this point.
 240          * Try to resolve the device name by other means.
 241          */
 242         for (i = 0; IS_ERR(bdev) && i <= timeout; i++) {
 243                 dev_t devt;
 244 
 245                 if (i)
 246                         /*
 247                          * Calling wait_for_device_probe in the first loop
 248                          * was not enough, sleep for a bit in subsequent
 249                          * go-arounds.
 250                          */
 251                         msleep(1000);
 252                 wait_for_device_probe();
 253 
 254                 devt = name_to_dev_t(devname);
 255                 if (!devt)
 256                         continue;
 257                 bdev = blkdev_get_by_dev(devt, mode, dev);
 258         }
 259 #endif
 260 
 261         if (IS_ERR(bdev)) {
 262                 pr_err("error: cannot open device %s\n", devname);
 263                 goto err_free_block2mtd;
 264         }
 265         dev->blkdev = bdev;
 266 
 267         if (MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) {
 268                 pr_err("attempting to use an MTD device as a block device\n");
 269                 goto err_free_block2mtd;
 270         }
 271 
 272         if ((long)dev->blkdev->bd_inode->i_size % erase_size) {
 273                 pr_err("erasesize must be a divisor of device size\n");
 274                 goto err_free_block2mtd;
 275         }
 276 
 277         mutex_init(&dev->write_mutex);
 278 
 279         /* Setup the MTD structure */
 280         /* make the name contain the block device in */
 281         name = kasprintf(GFP_KERNEL, "block2mtd: %s", devname);
 282         if (!name)
 283                 goto err_destroy_mutex;
 284 
 285         dev->mtd.name = name;
 286 
 287         dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
 288         dev->mtd.erasesize = erase_size;
 289         dev->mtd.writesize = 1;
 290         dev->mtd.writebufsize = PAGE_SIZE;
 291         dev->mtd.type = MTD_RAM;
 292         dev->mtd.flags = MTD_CAP_RAM;
 293         dev->mtd._erase = block2mtd_erase;
 294         dev->mtd._write = block2mtd_write;
 295         dev->mtd._sync = block2mtd_sync;
 296         dev->mtd._read = block2mtd_read;
 297         dev->mtd.priv = dev;
 298         dev->mtd.owner = THIS_MODULE;
 299 
 300         if (mtd_device_register(&dev->mtd, NULL, 0)) {
 301                 /* Device didn't get added, so free the entry */
 302                 goto err_destroy_mutex;
 303         }
 304 
 305         list_add(&dev->list, &blkmtd_device_list);
 306         pr_info("mtd%d: [%s] erase_size = %dKiB [%d]\n",
 307                 dev->mtd.index,
 308                 dev->mtd.name + strlen("block2mtd: "),
 309                 dev->mtd.erasesize >> 10, dev->mtd.erasesize);
 310         return dev;
 311 
 312 err_destroy_mutex:
 313         mutex_destroy(&dev->write_mutex);
 314 err_free_block2mtd:
 315         block2mtd_free_device(dev);
 316         return NULL;
 317 }
 318 
 319 
 320 /* This function works similar to reguler strtoul.  In addition, it
 321  * allows some suffixes for a more human-readable number format:
 322  * ki, Ki, kiB, KiB     - multiply result with 1024
 323  * Mi, MiB              - multiply result with 1024^2
 324  * Gi, GiB              - multiply result with 1024^3
 325  */
 326 static int ustrtoul(const char *cp, char **endp, unsigned int base)
 327 {
 328         unsigned long result = simple_strtoul(cp, endp, base);
 329         switch (**endp) {
 330         case 'G' :
 331                 result *= 1024;
 332                 /* fall through */
 333         case 'M':
 334                 result *= 1024;
 335                 /* fall through */
 336         case 'K':
 337         case 'k':
 338                 result *= 1024;
 339         /* By dwmw2 editorial decree, "ki", "Mi" or "Gi" are to be used. */
 340                 if ((*endp)[1] == 'i') {
 341                         if ((*endp)[2] == 'B')
 342                                 (*endp) += 3;
 343                         else
 344                                 (*endp) += 2;
 345                 }
 346         }
 347         return result;
 348 }
 349 
 350 
 351 static int parse_num(size_t *num, const char *token)
 352 {
 353         char *endp;
 354         size_t n;
 355 
 356         n = (size_t) ustrtoul(token, &endp, 0);
 357         if (*endp)
 358                 return -EINVAL;
 359 
 360         *num = n;
 361         return 0;
 362 }
 363 
 364 
 365 static inline void kill_final_newline(char *str)
 366 {
 367         char *newline = strrchr(str, '\n');
 368         if (newline && !newline[1])
 369                 *newline = 0;
 370 }
 371 
 372 
 373 #ifndef MODULE
 374 static int block2mtd_init_called = 0;
 375 /* 80 for device, 12 for erase size */
 376 static char block2mtd_paramline[80 + 12];
 377 #endif
 378 
 379 static int block2mtd_setup2(const char *val)
 380 {
 381         /* 80 for device, 12 for erase size, 80 for name, 8 for timeout */
 382         char buf[80 + 12 + 80 + 8];
 383         char *str = buf;
 384         char *token[2];
 385         char *name;
 386         size_t erase_size = PAGE_SIZE;
 387         unsigned long timeout = MTD_DEFAULT_TIMEOUT;
 388         int i, ret;
 389 
 390         if (strnlen(val, sizeof(buf)) >= sizeof(buf)) {
 391                 pr_err("parameter too long\n");
 392                 return 0;
 393         }
 394 
 395         strcpy(str, val);
 396         kill_final_newline(str);
 397 
 398         for (i = 0; i < 2; i++)
 399                 token[i] = strsep(&str, ",");
 400 
 401         if (str) {
 402                 pr_err("too many arguments\n");
 403                 return 0;
 404         }
 405 
 406         if (!token[0]) {
 407                 pr_err("no argument\n");
 408                 return 0;
 409         }
 410 
 411         name = token[0];
 412         if (strlen(name) + 1 > 80) {
 413                 pr_err("device name too long\n");
 414                 return 0;
 415         }
 416 
 417         if (token[1]) {
 418                 ret = parse_num(&erase_size, token[1]);
 419                 if (ret) {
 420                         pr_err("illegal erase size\n");
 421                         return 0;
 422                 }
 423         }
 424 
 425         add_device(name, erase_size, timeout);
 426 
 427         return 0;
 428 }
 429 
 430 
 431 static int block2mtd_setup(const char *val, const struct kernel_param *kp)
 432 {
 433 #ifdef MODULE
 434         return block2mtd_setup2(val);
 435 #else
 436         /* If more parameters are later passed in via
 437            /sys/module/block2mtd/parameters/block2mtd
 438            and block2mtd_init() has already been called,
 439            we can parse the argument now. */
 440 
 441         if (block2mtd_init_called)
 442                 return block2mtd_setup2(val);
 443 
 444         /* During early boot stage, we only save the parameters
 445            here. We must parse them later: if the param passed
 446            from kernel boot command line, block2mtd_setup() is
 447            called so early that it is not possible to resolve
 448            the device (even kmalloc() fails). Deter that work to
 449            block2mtd_setup2(). */
 450 
 451         strlcpy(block2mtd_paramline, val, sizeof(block2mtd_paramline));
 452 
 453         return 0;
 454 #endif
 455 }
 456 
 457 
 458 module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
 459 MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
 460 
 461 static int __init block2mtd_init(void)
 462 {
 463         int ret = 0;
 464 
 465 #ifndef MODULE
 466         if (strlen(block2mtd_paramline))
 467                 ret = block2mtd_setup2(block2mtd_paramline);
 468         block2mtd_init_called = 1;
 469 #endif
 470 
 471         return ret;
 472 }
 473 
 474 
 475 static void block2mtd_exit(void)
 476 {
 477         struct list_head *pos, *next;
 478 
 479         /* Remove the MTD devices */
 480         list_for_each_safe(pos, next, &blkmtd_device_list) {
 481                 struct block2mtd_dev *dev = list_entry(pos, typeof(*dev), list);
 482                 block2mtd_sync(&dev->mtd);
 483                 mtd_device_unregister(&dev->mtd);
 484                 mutex_destroy(&dev->write_mutex);
 485                 pr_info("mtd%d: [%s] removed\n",
 486                         dev->mtd.index,
 487                         dev->mtd.name + strlen("block2mtd: "));
 488                 list_del(&dev->list);
 489                 block2mtd_free_device(dev);
 490         }
 491 }
 492 
 493 late_initcall(block2mtd_init);
 494 module_exit(block2mtd_exit);
 495 
 496 MODULE_LICENSE("GPL");
 497 MODULE_AUTHOR("Joern Engel <joern@lazybastard.org>");
 498 MODULE_DESCRIPTION("Emulate an MTD using a block device");
/* [<][>][^][v][top][bottom][index][help] */
root/drivers/mtd/devices/block2mtd.c

DEFINITIONS
