root/drivers/ide/cy82c693.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. cy82c693_set_dma_mode
  2. cy82c693_set_pio_mode
  3. init_iops_cy82c693
  4. cy82c693_init_one
  5. cy82c693_remove
  6. cy82c693_ide_init
  7. cy82c693_ide_exit

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  *  Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer
   4  *  Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator
   5  *  Copyright (C) 2007-2011 Bartlomiej Zolnierkiewicz
   6  *
   7  * CYPRESS CY82C693 chipset IDE controller
   8  *
   9  * The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards.
  10  */
  11 
  12 #include <linux/module.h>
  13 #include <linux/types.h>
  14 #include <linux/pci.h>
  15 #include <linux/ide.h>
  16 #include <linux/init.h>
  17 
  18 #include <asm/io.h>
  19 
  20 #define DRV_NAME "cy82c693"
  21 
  22 /*
  23  *      NOTE: the value for busmaster timeout is tricky and I got it by
  24  *      trial and error!  By using a to low value will cause DMA timeouts
  25  *      and drop IDE performance, and by using a to high value will cause
  26  *      audio playback to scatter.
  27  *      If you know a better value or how to calc it, please let me know.
  28  */
  29 
  30 /* twice the value written in cy82c693ub datasheet */
  31 #define BUSMASTER_TIMEOUT       0x50
  32 /*
  33  * the value above was tested on my machine and it seems to work okay
  34  */
  35 
  36 /* here are the offset definitions for the registers */
  37 #define CY82_IDE_CMDREG         0x04
  38 #define CY82_IDE_ADDRSETUP      0x48
  39 #define CY82_IDE_MASTER_IOR     0x4C
  40 #define CY82_IDE_MASTER_IOW     0x4D
  41 #define CY82_IDE_SLAVE_IOR      0x4E
  42 #define CY82_IDE_SLAVE_IOW      0x4F
  43 #define CY82_IDE_MASTER_8BIT    0x50
  44 #define CY82_IDE_SLAVE_8BIT     0x51
  45 
  46 #define CY82_INDEX_PORT         0x22
  47 #define CY82_DATA_PORT          0x23
  48 
  49 #define CY82_INDEX_CHANNEL0     0x30
  50 #define CY82_INDEX_CHANNEL1     0x31
  51 #define CY82_INDEX_TIMEOUT      0x32
  52 
  53 /*
  54  * set DMA mode a specific channel for CY82C693
  55  */
  56 
  57 static void cy82c693_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
  58 {
  59         const u8 mode = drive->dma_mode;
  60         u8 single = (mode & 0x10) >> 4, index = 0, data = 0;
  61 
  62         index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0;
  63 
  64         data = (mode & 3) | (single << 2);
  65 
  66         outb(index, CY82_INDEX_PORT);
  67         outb(data, CY82_DATA_PORT);
  68 
  69         /*
  70          * note: below we set the value for Bus Master IDE TimeOut Register
  71          * I'm not absolutely sure what this does, but it solved my problem
  72          * with IDE DMA and sound, so I now can play sound and work with
  73          * my IDE driver at the same time :-)
  74          *
  75          * If you know the correct (best) value for this register please
  76          * let me know - ASK
  77          */
  78 
  79         data = BUSMASTER_TIMEOUT;
  80         outb(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT);
  81         outb(data, CY82_DATA_PORT);
  82 }
  83 
  84 static void cy82c693_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
  85 {
  86         struct pci_dev *dev = to_pci_dev(hwif->dev);
  87         int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
  88         const unsigned long T = 1000000 / bus_speed;
  89         unsigned int addrCtrl;
  90         struct ide_timing t;
  91         u8 time_16, time_8;
  92 
  93         /* select primary or secondary channel */
  94         if (drive->dn > 1) {  /* drive is on the secondary channel */
  95                 dev = pci_get_slot(dev->bus, dev->devfn+1);
  96                 if (!dev) {
  97                         printk(KERN_ERR "%s: tune_drive: "
  98                                 "Cannot find secondary interface!\n",
  99                                 drive->name);
 100                         return;
 101                 }
 102         }
 103 
 104         ide_timing_compute(drive, drive->pio_mode, &t, T, 1);
 105 
 106         time_16 = clamp_val(t.recover - 1, 0, 15) |
 107                   (clamp_val(t.active - 1, 0, 15) << 4);
 108         time_8 = clamp_val(t.act8b - 1, 0, 15) |
 109                  (clamp_val(t.rec8b - 1, 0, 15) << 4);
 110 
 111         /* now let's write  the clocks registers */
 112         if ((drive->dn & 1) == 0) {
 113                 /*
 114                  * set master drive
 115                  * address setup control register
 116                  * is 32 bit !!!
 117                  */
 118                 pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
 119 
 120                 addrCtrl &= (~0xF);
 121                 addrCtrl |= clamp_val(t.setup - 1, 0, 15);
 122                 pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
 123 
 124                 /* now let's set the remaining registers */
 125                 pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, time_16);
 126                 pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, time_16);
 127                 pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, time_8);
 128         } else {
 129                 /*
 130                  * set slave drive
 131                  * address setup control register
 132                  * is 32 bit !!!
 133                  */
 134                 pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
 135 
 136                 addrCtrl &= (~0xF0);
 137                 addrCtrl |= (clamp_val(t.setup - 1, 0, 15) << 4);
 138                 pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
 139 
 140                 /* now let's set the remaining registers */
 141                 pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, time_16);
 142                 pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, time_16);
 143                 pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, time_8);
 144         }
 145         if (drive->dn > 1)
 146                 pci_dev_put(dev);
 147 }
 148 
 149 static void init_iops_cy82c693(ide_hwif_t *hwif)
 150 {
 151         static ide_hwif_t *primary;
 152         struct pci_dev *dev = to_pci_dev(hwif->dev);
 153 
 154         if (PCI_FUNC(dev->devfn) == 1)
 155                 primary = hwif;
 156         else {
 157                 hwif->mate = primary;
 158                 hwif->channel = 1;
 159         }
 160 }
 161 
 162 static const struct ide_port_ops cy82c693_port_ops = {
 163         .set_pio_mode           = cy82c693_set_pio_mode,
 164         .set_dma_mode           = cy82c693_set_dma_mode,
 165 };
 166 
 167 static const struct ide_port_info cy82c693_chipset = {
 168         .name           = DRV_NAME,
 169         .init_iops      = init_iops_cy82c693,
 170         .port_ops       = &cy82c693_port_ops,
 171         .host_flags     = IDE_HFLAG_SINGLE,
 172         .pio_mask       = ATA_PIO4,
 173         .swdma_mask     = ATA_SWDMA2,
 174         .mwdma_mask     = ATA_MWDMA2,
 175 };
 176 
 177 static int cy82c693_init_one(struct pci_dev *dev,
 178                              const struct pci_device_id *id)
 179 {
 180         struct pci_dev *dev2;
 181         int ret = -ENODEV;
 182 
 183         /* CY82C693 is more than only a IDE controller.
 184            Function 1 is primary IDE channel, function 2 - secondary. */
 185         if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
 186             PCI_FUNC(dev->devfn) == 1) {
 187                 dev2 = pci_get_slot(dev->bus, dev->devfn + 1);
 188                 ret = ide_pci_init_two(dev, dev2, &cy82c693_chipset, NULL);
 189                 if (ret)
 190                         pci_dev_put(dev2);
 191         }
 192         return ret;
 193 }
 194 
 195 static void cy82c693_remove(struct pci_dev *dev)
 196 {
 197         struct ide_host *host = pci_get_drvdata(dev);
 198         struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
 199 
 200         ide_pci_remove(dev);
 201         pci_dev_put(dev2);
 202 }
 203 
 204 static const struct pci_device_id cy82c693_pci_tbl[] = {
 205         { PCI_VDEVICE(CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693), 0 },
 206         { 0, },
 207 };
 208 MODULE_DEVICE_TABLE(pci, cy82c693_pci_tbl);
 209 
 210 static struct pci_driver cy82c693_pci_driver = {
 211         .name           = "Cypress_IDE",
 212         .id_table       = cy82c693_pci_tbl,
 213         .probe          = cy82c693_init_one,
 214         .remove         = cy82c693_remove,
 215         .suspend        = ide_pci_suspend,
 216         .resume         = ide_pci_resume,
 217 };
 218 
 219 static int __init cy82c693_ide_init(void)
 220 {
 221         return ide_pci_register_driver(&cy82c693_pci_driver);
 222 }
 223 
 224 static void __exit cy82c693_ide_exit(void)
 225 {
 226         pci_unregister_driver(&cy82c693_pci_driver);
 227 }
 228 
 229 module_init(cy82c693_ide_init);
 230 module_exit(cy82c693_ide_exit);
 231 
 232 MODULE_AUTHOR("Andreas Krebs, Andre Hedrick, Bartlomiej Zolnierkiewicz");
 233 MODULE_DESCRIPTION("PCI driver module for the Cypress CY82C693 IDE");
 234 MODULE_LICENSE("GPL");

/* [<][>][^][v][top][bottom][index][help] */