root/drivers/reset/reset-zynq.c

DEFINITIONS

1. zynq_reset_assert
2. zynq_reset_deassert
3. zynq_reset_status
4. zynq_reset_probe

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (c) 2015, National Instruments Corp.
   4  *
   5  * Xilinx Zynq Reset controller driver
   6  *
   7  * Author: Moritz Fischer <moritz.fischer@ettus.com>
   8  */
   9 
  10 #include <linux/err.h>
  11 #include <linux/io.h>
  12 #include <linux/init.h>
  13 #include <linux/mfd/syscon.h>
  14 #include <linux/of.h>
  15 #include <linux/platform_device.h>
  16 #include <linux/reset-controller.h>
  17 #include <linux/regmap.h>
  18 #include <linux/types.h>
  19 
  20 struct zynq_reset_data {
  21         struct regmap *slcr;
  22         struct reset_controller_dev rcdev;
  23         u32 offset;
  24 };
  25 
  26 #define to_zynq_reset_data(p)           \
  27         container_of((p), struct zynq_reset_data, rcdev)
  28 
  29 static int zynq_reset_assert(struct reset_controller_dev *rcdev,
  30                              unsigned long id)
  31 {
  32         struct zynq_reset_data *priv = to_zynq_reset_data(rcdev);
  33 
  34         int bank = id / BITS_PER_LONG;
  35         int offset = id % BITS_PER_LONG;
  36 
  37         pr_debug("%s: %s reset bank %u offset %u\n", KBUILD_MODNAME, __func__,
  38                  bank, offset);
  39 
  40         return regmap_update_bits(priv->slcr,
  41                                   priv->offset + (bank * 4),
  42                                   BIT(offset),
  43                                   BIT(offset));
  44 }
  45 
  46 static int zynq_reset_deassert(struct reset_controller_dev *rcdev,
  47                                unsigned long id)
  48 {
  49         struct zynq_reset_data *priv = to_zynq_reset_data(rcdev);
  50 
  51         int bank = id / BITS_PER_LONG;
  52         int offset = id % BITS_PER_LONG;
  53 
  54         pr_debug("%s: %s reset bank %u offset %u\n", KBUILD_MODNAME, __func__,
  55                  bank, offset);
  56 
  57         return regmap_update_bits(priv->slcr,
  58                                   priv->offset + (bank * 4),
  59                                   BIT(offset),
  60                                   ~BIT(offset));
  61 }
  62 
  63 static int zynq_reset_status(struct reset_controller_dev *rcdev,
  64                              unsigned long id)
  65 {
  66         struct zynq_reset_data *priv = to_zynq_reset_data(rcdev);
  67 
  68         int bank = id / BITS_PER_LONG;
  69         int offset = id % BITS_PER_LONG;
  70         int ret;
  71         u32 reg;
  72 
  73         pr_debug("%s: %s reset bank %u offset %u\n", KBUILD_MODNAME, __func__,
  74                  bank, offset);
  75 
  76         ret = regmap_read(priv->slcr, priv->offset + (bank * 4), &reg);
  77         if (ret)
  78                 return ret;
  79 
  80         return !!(reg & BIT(offset));
  81 }
  82 
  83 static const struct reset_control_ops zynq_reset_ops = {
  84         .assert         = zynq_reset_assert,
  85         .deassert       = zynq_reset_deassert,
  86         .status         = zynq_reset_status,
  87 };
  88 
  89 static int zynq_reset_probe(struct platform_device *pdev)
  90 {
  91         struct resource *res;
  92         struct zynq_reset_data *priv;
  93 
  94         priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
  95         if (!priv)
  96                 return -ENOMEM;
  97         platform_set_drvdata(pdev, priv);
  98 
  99         priv->slcr = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
 100                                                      "syscon");
 101         if (IS_ERR(priv->slcr)) {
 102                 dev_err(&pdev->dev, "unable to get zynq-slcr regmap");
 103                 return PTR_ERR(priv->slcr);
 104         }
 105 
 106         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 107         if (!res) {
 108                 dev_err(&pdev->dev, "missing IO resource\n");
 109                 return -ENODEV;
 110         }
 111 
 112         priv->offset = res->start;
 113 
 114         priv->rcdev.owner = THIS_MODULE;
 115         priv->rcdev.nr_resets = resource_size(res) / 4 * BITS_PER_LONG;
 116         priv->rcdev.ops = &zynq_reset_ops;
 117         priv->rcdev.of_node = pdev->dev.of_node;
 118 
 119         return devm_reset_controller_register(&pdev->dev, &priv->rcdev);
 120 }
 121 
 122 static const struct of_device_id zynq_reset_dt_ids[] = {
 123         { .compatible = "xlnx,zynq-reset", },
 124         { /* sentinel */ },
 125 };
 126 
 127 static struct platform_driver zynq_reset_driver = {
 128         .probe  = zynq_reset_probe,
 129         .driver = {
 130                 .name           = KBUILD_MODNAME,
 131                 .of_match_table = zynq_reset_dt_ids,
 132         },
 133 };
 134 builtin_platform_driver(zynq_reset_driver);