1 /* SPDX-License-Identifier: GPL-2.0 */
2 /******************************************************************************
3 *
4 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
5 *
6 ******************************************************************************/
7 #ifndef __RTW_EEPROM_H__
8 #define __RTW_EEPROM_H__
9
10
11 #define RTL8712_EEPROM_ID 0x8712
12 /* define EEPROM_MAX_SIZE 256 */
13
14 #define HWSET_MAX_SIZE_128 128
15 #define HWSET_MAX_SIZE_256 256
16 #define HWSET_MAX_SIZE_512 512
17
18 #define EEPROM_MAX_SIZE HWSET_MAX_SIZE_512
19
20 #define CLOCK_RATE 50 /* 100us */
21
22 /* EEPROM opcodes */
23 #define EEPROM_READ_OPCODE 06
24 #define EEPROM_WRITE_OPCODE 05
25 #define EEPROM_ERASE_OPCODE 07
26 #define EEPROM_EWEN_OPCODE 19 /* Erase/write enable */
27 #define EEPROM_EWDS_OPCODE 16 /* Erase/write disable */
28
29 /* Country codes */
30 #define USA 0x555320
31 #define EUROPE 0x1 /* temp, should be provided later */
32 #define JAPAN 0x2 /* temp, should be provided later */
33
34 #define eeprom_cis0_sz 17
35 #define eeprom_cis1_sz 50
36
37 /* */
38 /* Customer ID, note that: */
39 /* This variable is initiailzed through EEPROM or registry, */
40 /* however, its definition may be different with that in EEPROM for */
41 /* EEPROM size consideration. So, we have to perform proper translation between them. */
42 /* Besides, CustomerID of registry has precedence of that of EEPROM. */
43 /* defined below. 060703, by rcnjko. */
44 /* */
45 typedef enum _RT_CUSTOMER_ID
46 {
47 RT_CID_DEFAULT = 0,
48 RT_CID_8187_ALPHA0 = 1,
49 RT_CID_8187_SERCOMM_PS = 2,
50 RT_CID_8187_HW_LED = 3,
51 RT_CID_8187_NETGEAR = 4,
52 RT_CID_WHQL = 5,
53 RT_CID_819x_CAMEO = 6,
54 RT_CID_819x_RUNTOP = 7,
55 RT_CID_819x_Senao = 8,
56 RT_CID_TOSHIBA = 9, /* Merge by Jacken, 2008/01/31. */
57 RT_CID_819x_Netcore = 10,
58 RT_CID_Nettronix = 11,
59 RT_CID_DLINK = 12,
60 RT_CID_PRONET = 13,
61 RT_CID_COREGA = 14,
62 RT_CID_CHINA_MOBILE = 15,
63 RT_CID_819x_ALPHA = 16,
64 RT_CID_819x_Sitecom = 17,
65 RT_CID_CCX = 18, /* It's set under CCX logo test and isn't demanded for CCX functions, but for test behavior like retry limit and tx report. By Bruce, 2009-02-17. */
66 RT_CID_819x_Lenovo = 19,
67 RT_CID_819x_QMI = 20,
68 RT_CID_819x_Edimax_Belkin = 21,
69 RT_CID_819x_Sercomm_Belkin = 22,
70 RT_CID_819x_CAMEO1 = 23,
71 RT_CID_819x_MSI = 24,
72 RT_CID_819x_Acer = 25,
73 RT_CID_819x_AzWave_ASUS = 26,
74 RT_CID_819x_AzWave = 27, /* For AzWave in PCIe, The ID is AzWave use and not only Asus */
75 RT_CID_819x_HP = 28,
76 RT_CID_819x_WNC_COREGA = 29,
77 RT_CID_819x_Arcadyan_Belkin = 30,
78 RT_CID_819x_SAMSUNG = 31,
79 RT_CID_819x_CLEVO = 32,
80 RT_CID_819x_DELL = 33,
81 RT_CID_819x_PRONETS = 34,
82 RT_CID_819x_Edimax_ASUS = 35,
83 RT_CID_NETGEAR = 36,
84 RT_CID_PLANEX = 37,
85 RT_CID_CC_C = 38,
86 RT_CID_819x_Xavi = 39,
87 RT_CID_LENOVO_CHINA = 40,
88 RT_CID_INTEL_CHINA = 41,
89 RT_CID_TPLINK_HPWR = 42,
90 RT_CID_819x_Sercomm_Netgear = 43,
91 RT_CID_819x_ALPHA_Dlink = 44,/* add by ylb 20121012 for customer led for alpha */
92 RT_CID_WNC_NEC = 45,/* add by page for NEC */
93 RT_CID_DNI_BUFFALO = 46,/* add by page for NEC */
94 }RT_CUSTOMER_ID, *PRT_CUSTOMER_ID;
95
96 struct eeprom_priv
97 {
98 u8 bautoload_fail_flag;
99 u8 bloadfile_fail_flag;
100 u8 bloadmac_fail_flag;
101 u8 EepromOrEfuse;
102
103 u8 mac_addr[6]; /* PermanentAddress */
104
105 u16 channel_plan;
106 u16 CustomerID;
107
108 u8 efuse_eeprom_data[EEPROM_MAX_SIZE]; /* 92C:256bytes, 88E:512bytes, we use union set (512bytes) */
109 u8 adjuseVoltageVal;
110
111 u8 EEPROMRFGainOffset;
112 u8 EEPROMRFGainVal;
113
114 u8 sdio_setting;
115 u32 ocr;
116 u8 cis0[eeprom_cis0_sz];
117 u8 cis1[eeprom_cis1_sz];
118 };
119
120 #endif /* __RTL871X_EEPROM_H__ */