drivers/staging/rtl8192u/r819xU

/* [<][>][^][v][top][bottom][index][help] */
This source file includes following definitions.
firmware_init_param
fw_download_code
CPUcheck_maincodeok_turnonCPU
CPUcheck_firmware_ready
init_firmware
   1 // SPDX-License-Identifier: GPL-2.0
   2 /**************************************************************************************************
   3  * Procedure:    Init boot code/firmware code/data session
   4  *
   5  * Description: This routine will initialize firmware. If any error occurs during the initialization
   6  *              process, the routine shall terminate immediately and return fail.
   7  *              NIC driver should call NdisOpenFile only from MiniportInitialize.
   8  *
   9  * Arguments:   The pointer of the adapter
  10 
  11  * Returns:
  12  *        NDIS_STATUS_FAILURE - the following initialization process should be terminated
  13  *        NDIS_STATUS_SUCCESS - if firmware initialization process success
  14  **************************************************************************************************/
  15 
  16 #include "r8192U.h"
  17 #include "r8192U_hw.h"
  18 #include "r819xU_firmware_img.h"
  19 #include "r819xU_firmware.h"
  20 #include <linux/firmware.h>
  21 
  22 static void firmware_init_param(struct net_device *dev)
  23 {
  24         struct r8192_priv       *priv = ieee80211_priv(dev);
  25         rt_firmware             *pfirmware = priv->pFirmware;
  26 
  27         pfirmware->cmdpacket_frag_threshold = GET_COMMAND_PACKET_FRAG_THRESHOLD(MAX_TRANSMIT_BUFFER_SIZE);
  28 }
  29 
  30 /*
  31  * segment the img and use the ptr and length to remember info on each segment
  32  *
  33  */
  34 static bool fw_download_code(struct net_device *dev, u8 *code_virtual_address,
  35                              u32 buffer_len)
  36 {
  37         struct r8192_priv   *priv = ieee80211_priv(dev);
  38         bool                rt_status = true;
  39         u16                 frag_threshold;
  40         u16                 frag_length, frag_offset = 0;
  41         int                 i;
  42 
  43         rt_firmware         *pfirmware = priv->pFirmware;
  44         struct sk_buff      *skb;
  45         unsigned char       *seg_ptr;
  46         struct cb_desc              *tcb_desc;
  47         u8                  bLastIniPkt;
  48         u8                  index;
  49 
  50         firmware_init_param(dev);
  51         /* Fragmentation might be required */
  52         frag_threshold = pfirmware->cmdpacket_frag_threshold;
  53         do {
  54                 if ((buffer_len - frag_offset) > frag_threshold) {
  55                         frag_length = frag_threshold;
  56                         bLastIniPkt = 0;
  57 
  58                 } else {
  59                         frag_length = buffer_len - frag_offset;
  60                         bLastIniPkt = 1;
  61 
  62                 }
  63 
  64                 /* Allocate skb buffer to contain firmware info and tx descriptor info
  65                  * add 4 to avoid packet appending overflow.
  66                  */
  67                 skb  = dev_alloc_skb(USB_HWDESC_HEADER_LEN + frag_length + 4);
  68                 if (!skb)
  69                         return false;
  70                 memcpy((unsigned char *)(skb->cb), &dev, sizeof(dev));
  71                 tcb_desc = (struct cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
  72                 tcb_desc->queue_index = TXCMD_QUEUE;
  73                 tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_INIT;
  74                 tcb_desc->bLastIniPkt = bLastIniPkt;
  75 
  76                 skb_reserve(skb, USB_HWDESC_HEADER_LEN);
  77                 seg_ptr = skb->data;
  78                 /*
  79                  * Transform from little endian to big endian
  80                  * and pending  zero
  81                  */
  82                 for (i = 0; i < frag_length; i += 4) {
  83                         *seg_ptr++ = ((i+0) < frag_length)?code_virtual_address[i+3] : 0;
  84                         *seg_ptr++ = ((i+1) < frag_length)?code_virtual_address[i+2] : 0;
  85                         *seg_ptr++ = ((i+2) < frag_length)?code_virtual_address[i+1] : 0;
  86                         *seg_ptr++ = ((i+3) < frag_length)?code_virtual_address[i+0] : 0;
  87                 }
  88                 tcb_desc->txbuf_size = (u16)i;
  89                 skb_put(skb, i);
  90 
  91                 index = tcb_desc->queue_index;
  92                 if (!priv->ieee80211->check_nic_enough_desc(dev, index) ||
  93                        (!skb_queue_empty(&priv->ieee80211->skb_waitQ[index])) ||
  94                        (priv->ieee80211->queue_stop)) {
  95                         RT_TRACE(COMP_FIRMWARE, "=====================================================> tx full!\n");
  96                         skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
  97                 } else {
  98                         priv->ieee80211->softmac_hard_start_xmit(skb, dev);
  99                 }
 100 
 101                 code_virtual_address += frag_length;
 102                 frag_offset += frag_length;
 103 
 104         } while (frag_offset < buffer_len);
 105 
 106         return rt_status;
 107 
 108 }
 109 
 110 /*
 111  * Procedure:   Check whether main code is download OK. If OK, turn on CPU
 112  *
 113  * Description: CPU register locates in different page against general register.
 114  *          Switch to CPU register in the begin and switch back before return
 115  *
 116  *
 117  * Arguments:   The pointer of the adapter
 118  *
 119  * Returns:
 120  *        NDIS_STATUS_FAILURE - the following initialization process should
 121  *                              be terminated
 122  *        NDIS_STATUS_SUCCESS - if firmware initialization process success
 123  */
 124 static bool CPUcheck_maincodeok_turnonCPU(struct net_device *dev)
 125 {
 126         bool            rt_status = true;
 127         int             check_putcodeOK_time = 200000, check_bootOk_time = 200000;
 128         u32             CPU_status = 0;
 129 
 130         /* Check whether put code OK */
 131         do {
 132                 read_nic_dword(dev, CPU_GEN, &CPU_status);
 133 
 134                 if (CPU_status&CPU_GEN_PUT_CODE_OK)
 135                         break;
 136 
 137         } while (check_putcodeOK_time--);
 138 
 139         if (!(CPU_status&CPU_GEN_PUT_CODE_OK)) {
 140                 RT_TRACE(COMP_ERR, "Download Firmware: Put code fail!\n");
 141                 goto CPUCheckMainCodeOKAndTurnOnCPU_Fail;
 142         } else {
 143                 RT_TRACE(COMP_FIRMWARE, "Download Firmware: Put code ok!\n");
 144         }
 145 
 146         /* Turn On CPU */
 147         read_nic_dword(dev, CPU_GEN, &CPU_status);
 148         write_nic_byte(dev, CPU_GEN,
 149                        (u8)((CPU_status | CPU_GEN_PWR_STB_CPU) & 0xff));
 150         mdelay(1000);
 151 
 152         /* Check whether CPU boot OK */
 153         do {
 154                 read_nic_dword(dev, CPU_GEN, &CPU_status);
 155 
 156                 if (CPU_status&CPU_GEN_BOOT_RDY)
 157                         break;
 158         } while (check_bootOk_time--);
 159 
 160         if (!(CPU_status&CPU_GEN_BOOT_RDY))
 161                 goto CPUCheckMainCodeOKAndTurnOnCPU_Fail;
 162         else
 163                 RT_TRACE(COMP_FIRMWARE, "Download Firmware: Boot ready!\n");
 164 
 165         return rt_status;
 166 
 167 CPUCheckMainCodeOKAndTurnOnCPU_Fail:
 168         RT_TRACE(COMP_ERR, "ERR in %s()\n", __func__);
 169         rt_status = false;
 170         return rt_status;
 171 }
 172 
 173 static bool CPUcheck_firmware_ready(struct net_device *dev)
 174 {
 175 
 176         bool            rt_status = true;
 177         int             check_time = 200000;
 178         u32             CPU_status = 0;
 179 
 180         /* Check Firmware Ready */
 181         do {
 182                 read_nic_dword(dev, CPU_GEN, &CPU_status);
 183 
 184                 if (CPU_status&CPU_GEN_FIRM_RDY)
 185                         break;
 186 
 187         } while (check_time--);
 188 
 189         if (!(CPU_status&CPU_GEN_FIRM_RDY))
 190                 goto CPUCheckFirmwareReady_Fail;
 191         else
 192                 RT_TRACE(COMP_FIRMWARE, "Download Firmware: Firmware ready!\n");
 193 
 194         return rt_status;
 195 
 196 CPUCheckFirmwareReady_Fail:
 197         RT_TRACE(COMP_ERR, "ERR in %s()\n", __func__);
 198         rt_status = false;
 199         return rt_status;
 200 
 201 }
 202 
 203 bool init_firmware(struct net_device *dev)
 204 {
 205         struct r8192_priv       *priv = ieee80211_priv(dev);
 206         bool                    rt_status = true;
 207 
 208         u32                     file_length = 0;
 209         u8                      *mapped_file = NULL;
 210         u32                     init_step = 0;
 211         enum opt_rst_type_e        rst_opt = OPT_SYSTEM_RESET;
 212         enum firmware_init_step_e  starting_state = FW_INIT_STEP0_BOOT;
 213 
 214         rt_firmware             *pfirmware = priv->pFirmware;
 215         const struct firmware   *fw_entry;
 216         const char *fw_name[3] = { "RTL8192U/boot.img",
 217                            "RTL8192U/main.img",
 218                            "RTL8192U/data.img"};
 219         int rc;
 220 
 221         RT_TRACE(COMP_FIRMWARE, " PlatformInitFirmware()==>\n");
 222 
 223         if (pfirmware->firmware_status == FW_STATUS_0_INIT) {
 224                 /* it is called by reset */
 225                 rst_opt = OPT_SYSTEM_RESET;
 226                 starting_state = FW_INIT_STEP0_BOOT;
 227                 /* TODO: system reset */
 228 
 229         } else if (pfirmware->firmware_status == FW_STATUS_5_READY) {
 230                 /* it is called by Initialize */
 231                 rst_opt = OPT_FIRMWARE_RESET;
 232                 starting_state = FW_INIT_STEP2_DATA;
 233         } else {
 234                 RT_TRACE(COMP_FIRMWARE, "PlatformInitFirmware: undefined firmware state\n");
 235         }
 236 
 237         /*
 238          * Download boot, main, and data image for System reset.
 239          * Download data image for firmware reset
 240          */
 241         for (init_step = starting_state; init_step <= FW_INIT_STEP2_DATA; init_step++) {
 242                 /*
 243                  * Open image file, and map file to continuous memory if open file success.
 244                  * or read image file from array. Default load from IMG file
 245                  */
 246                 if (rst_opt == OPT_SYSTEM_RESET) {
 247                         rc = request_firmware(&fw_entry, fw_name[init_step], &priv->udev->dev);
 248                         if (rc < 0) {
 249                                 RT_TRACE(COMP_ERR, "request firmware fail!\n");
 250                                 goto download_firmware_fail;
 251                         }
 252 
 253                         if (fw_entry->size > sizeof(pfirmware->firmware_buf)) {
 254                                 RT_TRACE(COMP_ERR, "img file size exceed the container buffer fail!\n");
 255                                 goto download_firmware_fail;
 256                         }
 257 
 258                         if (init_step != FW_INIT_STEP1_MAIN) {
 259                                 memcpy(pfirmware->firmware_buf, fw_entry->data, fw_entry->size);
 260                                 mapped_file = pfirmware->firmware_buf;
 261                                 file_length = fw_entry->size;
 262                         } else {
 263                                 memset(pfirmware->firmware_buf, 0, 128);
 264                                 memcpy(&pfirmware->firmware_buf[128], fw_entry->data, fw_entry->size);
 265                                 mapped_file = pfirmware->firmware_buf;
 266                                 file_length = fw_entry->size + 128;
 267                         }
 268                         pfirmware->firmware_buf_size = file_length;
 269                 } else if (rst_opt == OPT_FIRMWARE_RESET) {
 270                         /* we only need to download data.img here */
 271                         mapped_file = pfirmware->firmware_buf;
 272                         file_length = pfirmware->firmware_buf_size;
 273                 }
 274 
 275                 /* Download image file */
 276                 /* The firmware download process is just as following,
 277                  * 1. that is each packet will be segmented and inserted to the wait queue.
 278                  * 2. each packet segment will be put in the skb_buff packet.
 279                  * 3. each skb_buff packet data content will already include the firmware info
 280                  *   and Tx descriptor info
 281                  */
 282                 rt_status = fw_download_code(dev, mapped_file, file_length);
 283                 if (rst_opt == OPT_SYSTEM_RESET)
 284                         release_firmware(fw_entry);
 285 
 286                 if (!rt_status)
 287                         goto download_firmware_fail;
 288 
 289                 switch (init_step) {
 290                 case FW_INIT_STEP0_BOOT:
 291                         /* Download boot
 292                          * initialize command descriptor.
 293                          * will set polling bit when firmware code is also configured
 294                          */
 295                         pfirmware->firmware_status = FW_STATUS_1_MOVE_BOOT_CODE;
 296                         /* mdelay(1000); */
 297                         /*
 298                          * To initialize IMEM, CPU move code  from 0x80000080,
 299                          * hence, we send 0x80 byte packet
 300                          */
 301                         break;
 302 
 303                 case FW_INIT_STEP1_MAIN:
 304                         /* Download firmware code. Wait until Boot Ready and Turn on CPU */
 305                         pfirmware->firmware_status = FW_STATUS_2_MOVE_MAIN_CODE;
 306 
 307                         /* Check Put Code OK and Turn On CPU */
 308                         rt_status = CPUcheck_maincodeok_turnonCPU(dev);
 309                         if (!rt_status) {
 310                                 RT_TRACE(COMP_ERR, "CPUcheck_maincodeok_turnonCPU fail!\n");
 311                                 goto download_firmware_fail;
 312                         }
 313 
 314                         pfirmware->firmware_status = FW_STATUS_3_TURNON_CPU;
 315                         break;
 316 
 317                 case FW_INIT_STEP2_DATA:
 318                         /* download initial data code */
 319                         pfirmware->firmware_status = FW_STATUS_4_MOVE_DATA_CODE;
 320                         mdelay(1);
 321 
 322                         rt_status = CPUcheck_firmware_ready(dev);
 323                         if (!rt_status) {
 324                                 RT_TRACE(COMP_ERR, "CPUcheck_firmware_ready fail(%d)!\n", rt_status);
 325                                 goto download_firmware_fail;
 326                         }
 327 
 328                         /* wait until data code is initialized ready.*/
 329                         pfirmware->firmware_status = FW_STATUS_5_READY;
 330                         break;
 331                 }
 332         }
 333 
 334         RT_TRACE(COMP_FIRMWARE, "Firmware Download Success\n");
 335         return rt_status;
 336 
 337 download_firmware_fail:
 338         RT_TRACE(COMP_ERR, "ERR in %s()\n", __func__);
 339         rt_status = false;
 340         return rt_status;
 341 
 342 }
 343 
 344 MODULE_FIRMWARE("RTL8192U/boot.img");
 345 MODULE_FIRMWARE("RTL8192U/main.img");
 346 MODULE_FIRMWARE("RTL8192U/data.img");
/* [<][>][^][v][top][bottom][index][help] */
root/drivers/staging/rtl8192u/r819xU_firmware.c

DEFINITIONS
