root/drivers/mmc/host/sdhci-cns3xxx.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. sdhci_cns3xxx_get_max_clk
  2. sdhci_cns3xxx_set_clock
  3. sdhci_cns3xxx_probe

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * SDHCI support for CNS3xxx SoC
   4  *
   5  * Copyright 2008 Cavium Networks
   6  * Copyright 2010 MontaVista Software, LLC.
   7  *
   8  * Authors: Scott Shu
   9  *          Anton Vorontsov <avorontsov@mvista.com>
  10  */
  11 
  12 #include <linux/delay.h>
  13 #include <linux/device.h>
  14 #include <linux/mmc/host.h>
  15 #include <linux/module.h>
  16 #include "sdhci-pltfm.h"
  17 
  18 static unsigned int sdhci_cns3xxx_get_max_clk(struct sdhci_host *host)
  19 {
  20         return 150000000;
  21 }
  22 
  23 static void sdhci_cns3xxx_set_clock(struct sdhci_host *host, unsigned int clock)
  24 {
  25         struct device *dev = mmc_dev(host->mmc);
  26         int div = 1;
  27         u16 clk;
  28         unsigned long timeout;
  29 
  30         host->mmc->actual_clock = 0;
  31 
  32         sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
  33 
  34         if (clock == 0)
  35                 return;
  36 
  37         while (host->max_clk / div > clock) {
  38                 /*
  39                  * On CNS3xxx divider grows linearly up to 4, and then
  40                  * exponentially up to 256.
  41                  */
  42                 if (div < 4)
  43                         div += 1;
  44                 else if (div < 256)
  45                         div *= 2;
  46                 else
  47                         break;
  48         }
  49 
  50         dev_dbg(dev, "desired SD clock: %d, actual: %d\n",
  51                 clock, host->max_clk / div);
  52 
  53         /* Divide by 3 is special. */
  54         if (div != 3)
  55                 div >>= 1;
  56 
  57         clk = div << SDHCI_DIVIDER_SHIFT;
  58         clk |= SDHCI_CLOCK_INT_EN;
  59         sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
  60 
  61         timeout = 20;
  62         while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
  63                         & SDHCI_CLOCK_INT_STABLE)) {
  64                 if (timeout == 0) {
  65                         dev_warn(dev, "clock is unstable");
  66                         break;
  67                 }
  68                 timeout--;
  69                 mdelay(1);
  70         }
  71 
  72         clk |= SDHCI_CLOCK_CARD_EN;
  73         sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
  74 }
  75 
  76 static const struct sdhci_ops sdhci_cns3xxx_ops = {
  77         .get_max_clock  = sdhci_cns3xxx_get_max_clk,
  78         .set_clock      = sdhci_cns3xxx_set_clock,
  79         .set_bus_width  = sdhci_set_bus_width,
  80         .reset          = sdhci_reset,
  81         .set_uhs_signaling = sdhci_set_uhs_signaling,
  82 };
  83 
  84 static const struct sdhci_pltfm_data sdhci_cns3xxx_pdata = {
  85         .ops = &sdhci_cns3xxx_ops,
  86         .quirks = SDHCI_QUIRK_BROKEN_DMA |
  87                   SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
  88                   SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
  89                   SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
  90                   SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
  91 };
  92 
  93 static int sdhci_cns3xxx_probe(struct platform_device *pdev)
  94 {
  95         return sdhci_pltfm_register(pdev, &sdhci_cns3xxx_pdata, 0);
  96 }
  97 
  98 static struct platform_driver sdhci_cns3xxx_driver = {
  99         .driver         = {
 100                 .name   = "sdhci-cns3xxx",
 101                 .pm     = &sdhci_pltfm_pmops,
 102         },
 103         .probe          = sdhci_cns3xxx_probe,
 104         .remove         = sdhci_pltfm_unregister,
 105 };
 106 
 107 module_platform_driver(sdhci_cns3xxx_driver);
 108 
 109 MODULE_DESCRIPTION("SDHCI driver for CNS3xxx");
 110 MODULE_AUTHOR("Scott Shu, "
 111               "Anton Vorontsov <avorontsov@mvista.com>");
 112 MODULE_LICENSE("GPL v2");

/* [<][>][^][v][top][bottom][index][help] */