drivers/media/i2c/dw9714.c

/* [<][>][^][v][top][bottom][index][help] */
This source file includes following definitions.
to_dw9714_vcm
sd_to_dw9714_vcm
dw9714_i2c_write
dw9714_t_focus_vcm
dw9714_set_ctrl
dw9714_open
dw9714_close
dw9714_subdev_cleanup
dw9714_init_controls
dw9714_probe
dw9714_remove
dw9714_vcm_suspend
dw9714_vcm_resume
   1 // SPDX-License-Identifier: GPL-2.0
   2 // Copyright (c) 2015--2017 Intel Corporation.
   3 
   4 #include <linux/delay.h>
   5 #include <linux/i2c.h>
   6 #include <linux/module.h>
   7 #include <linux/pm_runtime.h>
   8 #include <media/v4l2-ctrls.h>
   9 #include <media/v4l2-device.h>
  10 
  11 #define DW9714_NAME             "dw9714"
  12 #define DW9714_MAX_FOCUS_POS    1023
  13 /*
  14  * This sets the minimum granularity for the focus positions.
  15  * A value of 1 gives maximum accuracy for a desired focus position
  16  */
  17 #define DW9714_FOCUS_STEPS      1
  18 /*
  19  * This acts as the minimum granularity of lens movement.
  20  * Keep this value power of 2, so the control steps can be
  21  * uniformly adjusted for gradual lens movement, with desired
  22  * number of control steps.
  23  */
  24 #define DW9714_CTRL_STEPS       16
  25 #define DW9714_CTRL_DELAY_US    1000
  26 /*
  27  * S[3:2] = 0x00, codes per step for "Linear Slope Control"
  28  * S[1:0] = 0x00, step period
  29  */
  30 #define DW9714_DEFAULT_S 0x0
  31 #define DW9714_VAL(data, s) ((data) << 4 | (s))
  32 
  33 /* dw9714 device structure */
  34 struct dw9714_device {
  35         struct v4l2_ctrl_handler ctrls_vcm;
  36         struct v4l2_subdev sd;
  37         u16 current_val;
  38 };
  39 
  40 static inline struct dw9714_device *to_dw9714_vcm(struct v4l2_ctrl *ctrl)
  41 {
  42         return container_of(ctrl->handler, struct dw9714_device, ctrls_vcm);
  43 }
  44 
  45 static inline struct dw9714_device *sd_to_dw9714_vcm(struct v4l2_subdev *subdev)
  46 {
  47         return container_of(subdev, struct dw9714_device, sd);
  48 }
  49 
  50 static int dw9714_i2c_write(struct i2c_client *client, u16 data)
  51 {
  52         int ret;
  53         __be16 val = cpu_to_be16(data);
  54 
  55         ret = i2c_master_send(client, (const char *)&val, sizeof(val));
  56         if (ret != sizeof(val)) {
  57                 dev_err(&client->dev, "I2C write fail\n");
  58                 return -EIO;
  59         }
  60         return 0;
  61 }
  62 
  63 static int dw9714_t_focus_vcm(struct dw9714_device *dw9714_dev, u16 val)
  64 {
  65         struct i2c_client *client = v4l2_get_subdevdata(&dw9714_dev->sd);
  66 
  67         dw9714_dev->current_val = val;
  68 
  69         return dw9714_i2c_write(client, DW9714_VAL(val, DW9714_DEFAULT_S));
  70 }
  71 
  72 static int dw9714_set_ctrl(struct v4l2_ctrl *ctrl)
  73 {
  74         struct dw9714_device *dev_vcm = to_dw9714_vcm(ctrl);
  75 
  76         if (ctrl->id == V4L2_CID_FOCUS_ABSOLUTE)
  77                 return dw9714_t_focus_vcm(dev_vcm, ctrl->val);
  78 
  79         return -EINVAL;
  80 }
  81 
  82 static const struct v4l2_ctrl_ops dw9714_vcm_ctrl_ops = {
  83         .s_ctrl = dw9714_set_ctrl,
  84 };
  85 
  86 static int dw9714_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
  87 {
  88         int rval;
  89 
  90         rval = pm_runtime_get_sync(sd->dev);
  91         if (rval < 0) {
  92                 pm_runtime_put_noidle(sd->dev);
  93                 return rval;
  94         }
  95 
  96         return 0;
  97 }
  98 
  99 static int dw9714_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
 100 {
 101         pm_runtime_put(sd->dev);
 102 
 103         return 0;
 104 }
 105 
 106 static const struct v4l2_subdev_internal_ops dw9714_int_ops = {
 107         .open = dw9714_open,
 108         .close = dw9714_close,
 109 };
 110 
 111 static const struct v4l2_subdev_ops dw9714_ops = { };
 112 
 113 static void dw9714_subdev_cleanup(struct dw9714_device *dw9714_dev)
 114 {
 115         v4l2_async_unregister_subdev(&dw9714_dev->sd);
 116         v4l2_ctrl_handler_free(&dw9714_dev->ctrls_vcm);
 117         media_entity_cleanup(&dw9714_dev->sd.entity);
 118 }
 119 
 120 static int dw9714_init_controls(struct dw9714_device *dev_vcm)
 121 {
 122         struct v4l2_ctrl_handler *hdl = &dev_vcm->ctrls_vcm;
 123         const struct v4l2_ctrl_ops *ops = &dw9714_vcm_ctrl_ops;
 124 
 125         v4l2_ctrl_handler_init(hdl, 1);
 126 
 127         v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FOCUS_ABSOLUTE,
 128                           0, DW9714_MAX_FOCUS_POS, DW9714_FOCUS_STEPS, 0);
 129 
 130         if (hdl->error)
 131                 dev_err(dev_vcm->sd.dev, "%s fail error: 0x%x\n",
 132                         __func__, hdl->error);
 133         dev_vcm->sd.ctrl_handler = hdl;
 134         return hdl->error;
 135 }
 136 
 137 static int dw9714_probe(struct i2c_client *client)
 138 {
 139         struct dw9714_device *dw9714_dev;
 140         int rval;
 141 
 142         dw9714_dev = devm_kzalloc(&client->dev, sizeof(*dw9714_dev),
 143                                   GFP_KERNEL);
 144         if (dw9714_dev == NULL)
 145                 return -ENOMEM;
 146 
 147         v4l2_i2c_subdev_init(&dw9714_dev->sd, client, &dw9714_ops);
 148         dw9714_dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
 149         dw9714_dev->sd.internal_ops = &dw9714_int_ops;
 150 
 151         rval = dw9714_init_controls(dw9714_dev);
 152         if (rval)
 153                 goto err_cleanup;
 154 
 155         rval = media_entity_pads_init(&dw9714_dev->sd.entity, 0, NULL);
 156         if (rval < 0)
 157                 goto err_cleanup;
 158 
 159         dw9714_dev->sd.entity.function = MEDIA_ENT_F_LENS;
 160 
 161         rval = v4l2_async_register_subdev(&dw9714_dev->sd);
 162         if (rval < 0)
 163                 goto err_cleanup;
 164 
 165         pm_runtime_set_active(&client->dev);
 166         pm_runtime_enable(&client->dev);
 167         pm_runtime_idle(&client->dev);
 168 
 169         return 0;
 170 
 171 err_cleanup:
 172         v4l2_ctrl_handler_free(&dw9714_dev->ctrls_vcm);
 173         media_entity_cleanup(&dw9714_dev->sd.entity);
 174 
 175         return rval;
 176 }
 177 
 178 static int dw9714_remove(struct i2c_client *client)
 179 {
 180         struct v4l2_subdev *sd = i2c_get_clientdata(client);
 181         struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
 182 
 183         pm_runtime_disable(&client->dev);
 184         dw9714_subdev_cleanup(dw9714_dev);
 185 
 186         return 0;
 187 }
 188 
 189 /*
 190  * This function sets the vcm position, so it consumes least current
 191  * The lens position is gradually moved in units of DW9714_CTRL_STEPS,
 192  * to make the movements smoothly.
 193  */
 194 static int __maybe_unused dw9714_vcm_suspend(struct device *dev)
 195 {
 196         struct i2c_client *client = to_i2c_client(dev);
 197         struct v4l2_subdev *sd = i2c_get_clientdata(client);
 198         struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
 199         int ret, val;
 200 
 201         for (val = dw9714_dev->current_val & ~(DW9714_CTRL_STEPS - 1);
 202              val >= 0; val -= DW9714_CTRL_STEPS) {
 203                 ret = dw9714_i2c_write(client,
 204                                        DW9714_VAL(val, DW9714_DEFAULT_S));
 205                 if (ret)
 206                         dev_err_once(dev, "%s I2C failure: %d", __func__, ret);
 207                 usleep_range(DW9714_CTRL_DELAY_US, DW9714_CTRL_DELAY_US + 10);
 208         }
 209         return 0;
 210 }
 211 
 212 /*
 213  * This function sets the vcm position to the value set by the user
 214  * through v4l2_ctrl_ops s_ctrl handler
 215  * The lens position is gradually moved in units of DW9714_CTRL_STEPS,
 216  * to make the movements smoothly.
 217  */
 218 static int  __maybe_unused dw9714_vcm_resume(struct device *dev)
 219 {
 220         struct i2c_client *client = to_i2c_client(dev);
 221         struct v4l2_subdev *sd = i2c_get_clientdata(client);
 222         struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
 223         int ret, val;
 224 
 225         for (val = dw9714_dev->current_val % DW9714_CTRL_STEPS;
 226              val < dw9714_dev->current_val + DW9714_CTRL_STEPS - 1;
 227              val += DW9714_CTRL_STEPS) {
 228                 ret = dw9714_i2c_write(client,
 229                                        DW9714_VAL(val, DW9714_DEFAULT_S));
 230                 if (ret)
 231                         dev_err_ratelimited(dev, "%s I2C failure: %d",
 232                                                 __func__, ret);
 233                 usleep_range(DW9714_CTRL_DELAY_US, DW9714_CTRL_DELAY_US + 10);
 234         }
 235 
 236         return 0;
 237 }
 238 
 239 static const struct i2c_device_id dw9714_id_table[] = {
 240         { DW9714_NAME, 0 },
 241         { { 0 } }
 242 };
 243 MODULE_DEVICE_TABLE(i2c, dw9714_id_table);
 244 
 245 static const struct of_device_id dw9714_of_table[] = {
 246         { .compatible = "dongwoon,dw9714" },
 247         { { 0 } }
 248 };
 249 MODULE_DEVICE_TABLE(of, dw9714_of_table);
 250 
 251 static const struct dev_pm_ops dw9714_pm_ops = {
 252         SET_SYSTEM_SLEEP_PM_OPS(dw9714_vcm_suspend, dw9714_vcm_resume)
 253         SET_RUNTIME_PM_OPS(dw9714_vcm_suspend, dw9714_vcm_resume, NULL)
 254 };
 255 
 256 static struct i2c_driver dw9714_i2c_driver = {
 257         .driver = {
 258                 .name = DW9714_NAME,
 259                 .pm = &dw9714_pm_ops,
 260                 .of_match_table = dw9714_of_table,
 261         },
 262         .probe_new = dw9714_probe,
 263         .remove = dw9714_remove,
 264         .id_table = dw9714_id_table,
 265 };
 266 
 267 module_i2c_driver(dw9714_i2c_driver);
 268 
 269 MODULE_AUTHOR("Tianshu Qiu <tian.shu.qiu@intel.com>");
 270 MODULE_AUTHOR("Jian Xu Zheng");
 271 MODULE_AUTHOR("Yuning Pu <yuning.pu@intel.com>");
 272 MODULE_AUTHOR("Jouni Ukkonen <jouni.ukkonen@intel.com>");
 273 MODULE_AUTHOR("Tommi Franttila <tommi.franttila@intel.com>");
 274 MODULE_DESCRIPTION("DW9714 VCM driver");
 275 MODULE_LICENSE("GPL v2");
/* [<][>][^][v][top][bottom][index][help] */
root/drivers/media/i2c/dw9714.c

DEFINITIONS
