root/drivers/media/i2c/msp3400-kthreads.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. msp_standard_std_name
  2. msp_standard_std
  3. msp_set_source
  4. msp3400c_set_carrier
  5. msp3400c_set_mode
  6. msp3400c_set_audmode
  7. msp3400c_print_mode
  8. msp3400c_detect_stereo
  9. watch_stereo
  10. msp3400c_thread
  11. msp3410d_thread
  12. msp34xxg_modus
  13. msp34xxg_set_source
  14. msp34xxg_set_sources
  15. msp34xxg_reset
  16. msp34xxg_thread
  17. msp34xxg_detect_stereo
  18. msp34xxg_set_audmode
  19. msp_set_audmode
  20. msp_detect_stereo

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Programming the mspx4xx sound processor family
   4  *
   5  * (c) 1997-2001 Gerd Knorr <kraxel@bytesex.org>
   6  */
   7 
   8 
   9 #include <linux/kernel.h>
  10 #include <linux/module.h>
  11 #include <linux/i2c.h>
  12 #include <linux/freezer.h>
  13 #include <linux/videodev2.h>
  14 #include <media/v4l2-common.h>
  15 #include <media/drv-intf/msp3400.h>
  16 #include <linux/kthread.h>
  17 #include <linux/suspend.h>
  18 #include "msp3400-driver.h"
  19 
  20 /* this one uses the automatic sound standard detection of newer msp34xx
  21    chip versions */
  22 static struct {
  23         int retval;
  24         int main, second;
  25         char *name;
  26         v4l2_std_id std;
  27 } msp_stdlist[] = {
  28         { 0x0000, 0, 0, "could not detect sound standard", V4L2_STD_ALL },
  29         { 0x0001, 0, 0, "autodetect start", V4L2_STD_ALL },
  30         { 0x0002, MSP_CARRIER(4.5), MSP_CARRIER(4.72),
  31           "4.5/4.72  M Dual FM-Stereo", V4L2_STD_MN },
  32         { 0x0003, MSP_CARRIER(5.5), MSP_CARRIER(5.7421875),
  33           "5.5/5.74  B/G Dual FM-Stereo", V4L2_STD_BG },
  34         { 0x0004, MSP_CARRIER(6.5), MSP_CARRIER(6.2578125),
  35           "6.5/6.25  D/K1 Dual FM-Stereo", V4L2_STD_DK },
  36         { 0x0005, MSP_CARRIER(6.5), MSP_CARRIER(6.7421875),
  37           "6.5/6.74  D/K2 Dual FM-Stereo", V4L2_STD_DK },
  38         { 0x0006, MSP_CARRIER(6.5), MSP_CARRIER(6.5),
  39           "6.5  D/K FM-Mono (HDEV3)", V4L2_STD_DK },
  40         { 0x0007, MSP_CARRIER(6.5), MSP_CARRIER(5.7421875),
  41           "6.5/5.74  D/K3 Dual FM-Stereo", V4L2_STD_DK },
  42         { 0x0008, MSP_CARRIER(5.5), MSP_CARRIER(5.85),
  43           "5.5/5.85  B/G NICAM FM", V4L2_STD_BG },
  44         { 0x0009, MSP_CARRIER(6.5), MSP_CARRIER(5.85),
  45           "6.5/5.85  L NICAM AM", V4L2_STD_L },
  46         { 0x000a, MSP_CARRIER(6.0), MSP_CARRIER(6.55),
  47           "6.0/6.55  I NICAM FM", V4L2_STD_PAL_I },
  48         { 0x000b, MSP_CARRIER(6.5), MSP_CARRIER(5.85),
  49           "6.5/5.85  D/K NICAM FM", V4L2_STD_DK },
  50         { 0x000c, MSP_CARRIER(6.5), MSP_CARRIER(5.85),
  51           "6.5/5.85  D/K NICAM FM (HDEV2)", V4L2_STD_DK },
  52         { 0x000d, MSP_CARRIER(6.5), MSP_CARRIER(5.85),
  53           "6.5/5.85  D/K NICAM FM (HDEV3)", V4L2_STD_DK },
  54         { 0x0020, MSP_CARRIER(4.5), MSP_CARRIER(4.5),
  55           "4.5  M BTSC-Stereo", V4L2_STD_MTS },
  56         { 0x0021, MSP_CARRIER(4.5), MSP_CARRIER(4.5),
  57           "4.5  M BTSC-Mono + SAP", V4L2_STD_MTS },
  58         { 0x0030, MSP_CARRIER(4.5), MSP_CARRIER(4.5),
  59           "4.5  M EIA-J Japan Stereo", V4L2_STD_NTSC_M_JP },
  60         { 0x0040, MSP_CARRIER(10.7), MSP_CARRIER(10.7),
  61           "10.7  FM-Stereo Radio", V4L2_STD_ALL },
  62         { 0x0050, MSP_CARRIER(6.5), MSP_CARRIER(6.5),
  63           "6.5  SAT-Mono", V4L2_STD_ALL },
  64         { 0x0051, MSP_CARRIER(7.02), MSP_CARRIER(7.20),
  65           "7.02/7.20  SAT-Stereo", V4L2_STD_ALL },
  66         { 0x0060, MSP_CARRIER(7.2), MSP_CARRIER(7.2),
  67           "7.2  SAT ADR", V4L2_STD_ALL },
  68         {     -1, 0, 0, NULL, 0 }, /* EOF */
  69 };
  70 
  71 static struct msp3400c_init_data_dem {
  72         int fir1[6];
  73         int fir2[6];
  74         int cdo1;
  75         int cdo2;
  76         int ad_cv;
  77         int mode_reg;
  78         int dsp_src;
  79         int dsp_matrix;
  80 } msp3400c_init_data[] = {
  81         {       /* AM (for carrier detect / msp3400) */
  82                 {75, 19, 36, 35, 39, 40},
  83                 {75, 19, 36, 35, 39, 40},
  84                 MSP_CARRIER(5.5), MSP_CARRIER(5.5),
  85                 0x00d0, 0x0500, 0x0020, 0x3000
  86         }, {    /* AM (for carrier detect / msp3410) */
  87                 {-1, -1, -8, 2, 59, 126},
  88                 {-1, -1, -8, 2, 59, 126},
  89                 MSP_CARRIER(5.5), MSP_CARRIER(5.5),
  90                 0x00d0, 0x0100, 0x0020, 0x3000
  91         }, {    /* FM Radio */
  92                 {-8, -8, 4, 6, 78, 107},
  93                 {-8, -8, 4, 6, 78, 107},
  94                 MSP_CARRIER(10.7), MSP_CARRIER(10.7),
  95                 0x00d0, 0x0480, 0x0020, 0x3000
  96         }, {    /* Terrestrial FM-mono + FM-stereo */
  97                 {3, 18, 27, 48, 66, 72},
  98                 {3, 18, 27, 48, 66, 72},
  99                 MSP_CARRIER(5.5), MSP_CARRIER(5.5),
 100                 0x00d0, 0x0480, 0x0030, 0x3000
 101         }, {    /* Sat FM-mono */
 102                 { 1, 9, 14, 24, 33, 37},
 103                 { 3, 18, 27, 48, 66, 72},
 104                 MSP_CARRIER(6.5), MSP_CARRIER(6.5),
 105                 0x00c6, 0x0480, 0x0000, 0x3000
 106         }, {    /* NICAM/FM --  B/G (5.5/5.85), D/K (6.5/5.85) */
 107                 {-2, -8, -10, 10, 50, 86},
 108                 {3, 18, 27, 48, 66, 72},
 109                 MSP_CARRIER(5.5), MSP_CARRIER(5.5),
 110                 0x00d0, 0x0040, 0x0120, 0x3000
 111         }, {    /* NICAM/FM -- I (6.0/6.552) */
 112                 {2, 4, -6, -4, 40, 94},
 113                 {3, 18, 27, 48, 66, 72},
 114                 MSP_CARRIER(6.0), MSP_CARRIER(6.0),
 115                 0x00d0, 0x0040, 0x0120, 0x3000
 116         }, {    /* NICAM/AM -- L (6.5/5.85) */
 117                 {-2, -8, -10, 10, 50, 86},
 118                 {-4, -12, -9, 23, 79, 126},
 119                 MSP_CARRIER(6.5), MSP_CARRIER(6.5),
 120                 0x00c6, 0x0140, 0x0120, 0x7c00
 121         },
 122 };
 123 
 124 struct msp3400c_carrier_detect {
 125         int   cdo;
 126         char *name;
 127 };
 128 
 129 static struct msp3400c_carrier_detect msp3400c_carrier_detect_main[] = {
 130         /* main carrier */
 131         { MSP_CARRIER(4.5),        "4.5   NTSC"                   },
 132         { MSP_CARRIER(5.5),        "5.5   PAL B/G"                },
 133         { MSP_CARRIER(6.0),        "6.0   PAL I"                  },
 134         { MSP_CARRIER(6.5),        "6.5   PAL D/K + SAT + SECAM"  }
 135 };
 136 
 137 static struct msp3400c_carrier_detect msp3400c_carrier_detect_55[] = {
 138         /* PAL B/G */
 139         { MSP_CARRIER(5.7421875),  "5.742 PAL B/G FM-stereo"     },
 140         { MSP_CARRIER(5.85),       "5.85  PAL B/G NICAM"         }
 141 };
 142 
 143 static struct msp3400c_carrier_detect msp3400c_carrier_detect_65[] = {
 144         /* PAL SAT / SECAM */
 145         { MSP_CARRIER(5.85),       "5.85  PAL D/K + SECAM NICAM" },
 146         { MSP_CARRIER(6.2578125),  "6.25  PAL D/K1 FM-stereo" },
 147         { MSP_CARRIER(6.7421875),  "6.74  PAL D/K2 FM-stereo" },
 148         { MSP_CARRIER(7.02),       "7.02  PAL SAT FM-stereo s/b" },
 149         { MSP_CARRIER(7.20),       "7.20  PAL SAT FM-stereo s"   },
 150         { MSP_CARRIER(7.38),       "7.38  PAL SAT FM-stereo b"   },
 151 };
 152 
 153 /* ------------------------------------------------------------------------ */
 154 
 155 const char *msp_standard_std_name(int std)
 156 {
 157         int i;
 158 
 159         for (i = 0; msp_stdlist[i].name != NULL; i++)
 160                 if (msp_stdlist[i].retval == std)
 161                         return msp_stdlist[i].name;
 162         return "unknown";
 163 }
 164 
 165 static v4l2_std_id msp_standard_std(int std)
 166 {
 167         int i;
 168 
 169         for (i = 0; msp_stdlist[i].name != NULL; i++)
 170                 if (msp_stdlist[i].retval == std)
 171                         return msp_stdlist[i].std;
 172         return V4L2_STD_ALL;
 173 }
 174 
 175 static void msp_set_source(struct i2c_client *client, u16 src)
 176 {
 177         struct msp_state *state = to_state(i2c_get_clientdata(client));
 178 
 179         if (msp_dolby) {
 180                 msp_write_dsp(client, 0x0008, 0x0520); /* I2S1 */
 181                 msp_write_dsp(client, 0x0009, 0x0620); /* I2S2 */
 182         } else {
 183                 msp_write_dsp(client, 0x0008, src);
 184                 msp_write_dsp(client, 0x0009, src);
 185         }
 186         msp_write_dsp(client, 0x000a, src);
 187         msp_write_dsp(client, 0x000b, src);
 188         msp_write_dsp(client, 0x000c, src);
 189         if (state->has_scart2_out)
 190                 msp_write_dsp(client, 0x0041, src);
 191 }
 192 
 193 void msp3400c_set_carrier(struct i2c_client *client, int cdo1, int cdo2)
 194 {
 195         msp_write_dem(client, 0x0093, cdo1 & 0xfff);
 196         msp_write_dem(client, 0x009b, cdo1 >> 12);
 197         msp_write_dem(client, 0x00a3, cdo2 & 0xfff);
 198         msp_write_dem(client, 0x00ab, cdo2 >> 12);
 199         msp_write_dem(client, 0x0056, 0); /* LOAD_REG_1/2 */
 200 }
 201 
 202 void msp3400c_set_mode(struct i2c_client *client, int mode)
 203 {
 204         struct msp_state *state = to_state(i2c_get_clientdata(client));
 205         struct msp3400c_init_data_dem *data = &msp3400c_init_data[mode];
 206         int tuner = (state->route_in >> 3) & 1;
 207         int i;
 208 
 209         dev_dbg_lvl(&client->dev, 1, msp_debug, "set_mode: %d\n", mode);
 210         state->mode = mode;
 211         state->rxsubchans = V4L2_TUNER_SUB_MONO;
 212 
 213         msp_write_dem(client, 0x00bb, data->ad_cv | (tuner ? 0x100 : 0));
 214 
 215         for (i = 5; i >= 0; i--)               /* fir 1 */
 216                 msp_write_dem(client, 0x0001, data->fir1[i]);
 217 
 218         msp_write_dem(client, 0x0005, 0x0004); /* fir 2 */
 219         msp_write_dem(client, 0x0005, 0x0040);
 220         msp_write_dem(client, 0x0005, 0x0000);
 221         for (i = 5; i >= 0; i--)
 222                 msp_write_dem(client, 0x0005, data->fir2[i]);
 223 
 224         msp_write_dem(client, 0x0083, data->mode_reg);
 225 
 226         msp3400c_set_carrier(client, data->cdo1, data->cdo2);
 227 
 228         msp_set_source(client, data->dsp_src);
 229         /* set prescales */
 230 
 231         /* volume prescale for SCART (AM mono input) */
 232         msp_write_dsp(client, 0x000d, 0x1900);
 233         msp_write_dsp(client, 0x000e, data->dsp_matrix);
 234         if (state->has_nicam) /* nicam prescale */
 235                 msp_write_dsp(client, 0x0010, 0x5a00);
 236 }
 237 
 238 /* Set audio mode. Note that the pre-'G' models do not support BTSC+SAP,
 239    nor do they support stereo BTSC. */
 240 static void msp3400c_set_audmode(struct i2c_client *client)
 241 {
 242         static char *strmode[] = {
 243                 "mono", "stereo", "lang2", "lang1", "lang1+lang2"
 244         };
 245         struct msp_state *state = to_state(i2c_get_clientdata(client));
 246         char *modestr = (state->audmode >= 0 && state->audmode < 5) ?
 247                 strmode[state->audmode] : "unknown";
 248         int src = 0;    /* channel source: FM/AM, nicam or SCART */
 249         int audmode = state->audmode;
 250 
 251         if (state->opmode == OPMODE_AUTOSELECT) {
 252                 /* this method would break everything, let's make sure
 253                  * it's never called
 254                  */
 255                 dev_dbg_lvl(&client->dev, 1, msp_debug,
 256                         "set_audmode called with mode=%d instead of set_source (ignored)\n",
 257                         state->audmode);
 258                 return;
 259         }
 260 
 261         /* Note: for the C and D revs no NTSC stereo + SAP is possible as
 262            the hardware does not support SAP. So the rxsubchans combination
 263            of STEREO | LANG2 does not occur. */
 264 
 265         if (state->mode != MSP_MODE_EXTERN) {
 266                 /* switch to mono if only mono is available */
 267                 if (state->rxsubchans == V4L2_TUNER_SUB_MONO)
 268                         audmode = V4L2_TUNER_MODE_MONO;
 269                 /* if bilingual */
 270                 else if (state->rxsubchans & V4L2_TUNER_SUB_LANG2) {
 271                         /* and mono or stereo, then fallback to lang1 */
 272                         if (audmode == V4L2_TUNER_MODE_MONO ||
 273                             audmode == V4L2_TUNER_MODE_STEREO)
 274                                 audmode = V4L2_TUNER_MODE_LANG1;
 275                 }
 276                 /* if stereo, and audmode is not mono, then switch to stereo */
 277                 else if (audmode != V4L2_TUNER_MODE_MONO)
 278                         audmode = V4L2_TUNER_MODE_STEREO;
 279         }
 280 
 281         /* switch demodulator */
 282         switch (state->mode) {
 283         case MSP_MODE_FM_TERRA:
 284                 dev_dbg_lvl(&client->dev, 1, msp_debug, "FM set_audmode: %s\n", modestr);
 285                 switch (audmode) {
 286                 case V4L2_TUNER_MODE_STEREO:
 287                         msp_write_dsp(client, 0x000e, 0x3001);
 288                         break;
 289                 case V4L2_TUNER_MODE_MONO:
 290                 case V4L2_TUNER_MODE_LANG1:
 291                 case V4L2_TUNER_MODE_LANG2:
 292                 case V4L2_TUNER_MODE_LANG1_LANG2:
 293                         msp_write_dsp(client, 0x000e, 0x3000);
 294                         break;
 295                 }
 296                 break;
 297         case MSP_MODE_FM_SAT:
 298                 dev_dbg_lvl(&client->dev, 1, msp_debug, "SAT set_audmode: %s\n", modestr);
 299                 switch (audmode) {
 300                 case V4L2_TUNER_MODE_MONO:
 301                         msp3400c_set_carrier(client, MSP_CARRIER(6.5), MSP_CARRIER(6.5));
 302                         break;
 303                 case V4L2_TUNER_MODE_STEREO:
 304                 case V4L2_TUNER_MODE_LANG1_LANG2:
 305                         msp3400c_set_carrier(client, MSP_CARRIER(7.2), MSP_CARRIER(7.02));
 306                         break;
 307                 case V4L2_TUNER_MODE_LANG1:
 308                         msp3400c_set_carrier(client, MSP_CARRIER(7.38), MSP_CARRIER(7.02));
 309                         break;
 310                 case V4L2_TUNER_MODE_LANG2:
 311                         msp3400c_set_carrier(client, MSP_CARRIER(7.38), MSP_CARRIER(7.02));
 312                         break;
 313                 }
 314                 break;
 315         case MSP_MODE_FM_NICAM1:
 316         case MSP_MODE_FM_NICAM2:
 317         case MSP_MODE_AM_NICAM:
 318                 dev_dbg_lvl(&client->dev, 1, msp_debug,
 319                         "NICAM set_audmode: %s\n", modestr);
 320                 if (state->nicam_on)
 321                         src = 0x0100;  /* NICAM */
 322                 break;
 323         case MSP_MODE_BTSC:
 324                 dev_dbg_lvl(&client->dev, 1, msp_debug,
 325                         "BTSC set_audmode: %s\n", modestr);
 326                 break;
 327         case MSP_MODE_EXTERN:
 328                 dev_dbg_lvl(&client->dev, 1, msp_debug,
 329                         "extern set_audmode: %s\n", modestr);
 330                 src = 0x0200;  /* SCART */
 331                 break;
 332         case MSP_MODE_FM_RADIO:
 333                 dev_dbg_lvl(&client->dev, 1, msp_debug,
 334                         "FM-Radio set_audmode: %s\n", modestr);
 335                 break;
 336         default:
 337                 dev_dbg_lvl(&client->dev, 1, msp_debug, "mono set_audmode\n");
 338                 return;
 339         }
 340 
 341         /* switch audio */
 342         dev_dbg_lvl(&client->dev, 1, msp_debug, "set audmode %d\n", audmode);
 343         switch (audmode) {
 344         case V4L2_TUNER_MODE_STEREO:
 345         case V4L2_TUNER_MODE_LANG1_LANG2:
 346                 src |= 0x0020;
 347                 break;
 348         case V4L2_TUNER_MODE_MONO:
 349                 if (state->mode == MSP_MODE_AM_NICAM) {
 350                         dev_dbg_lvl(&client->dev, 1, msp_debug, "switching to AM mono\n");
 351                         /* AM mono decoding is handled by tuner, not MSP chip */
 352                         /* SCART switching control register */
 353                         msp_set_scart(client, SCART_MONO, 0);
 354                         src = 0x0200;
 355                         break;
 356                 }
 357                 if (state->rxsubchans & V4L2_TUNER_SUB_STEREO)
 358                         src = 0x0030;
 359                 break;
 360         case V4L2_TUNER_MODE_LANG1:
 361                 break;
 362         case V4L2_TUNER_MODE_LANG2:
 363                 src |= 0x0010;
 364                 break;
 365         }
 366         dev_dbg_lvl(&client->dev, 1, msp_debug,
 367                 "set_audmode final source/matrix = 0x%x\n", src);
 368 
 369         msp_set_source(client, src);
 370 }
 371 
 372 static void msp3400c_print_mode(struct i2c_client *client)
 373 {
 374         struct msp_state *state = to_state(i2c_get_clientdata(client));
 375 
 376         if (state->main == state->second)
 377                 dev_dbg_lvl(&client->dev, 1, msp_debug,
 378                         "mono sound carrier: %d.%03d MHz\n",
 379                         state->main / 910000, (state->main / 910) % 1000);
 380         else
 381                 dev_dbg_lvl(&client->dev, 1, msp_debug,
 382                         "main sound carrier: %d.%03d MHz\n",
 383                         state->main / 910000, (state->main / 910) % 1000);
 384         if (state->mode == MSP_MODE_FM_NICAM1 || state->mode == MSP_MODE_FM_NICAM2)
 385                 dev_dbg_lvl(&client->dev, 1, msp_debug,
 386                         "NICAM/FM carrier  : %d.%03d MHz\n",
 387                         state->second / 910000, (state->second/910) % 1000);
 388         if (state->mode == MSP_MODE_AM_NICAM)
 389                 dev_dbg_lvl(&client->dev, 1, msp_debug,
 390                         "NICAM/AM carrier  : %d.%03d MHz\n",
 391                         state->second / 910000, (state->second / 910) % 1000);
 392         if (state->mode == MSP_MODE_FM_TERRA && state->main != state->second) {
 393                 dev_dbg_lvl(&client->dev, 1, msp_debug,
 394                         "FM-stereo carrier : %d.%03d MHz\n",
 395                         state->second / 910000, (state->second / 910) % 1000);
 396         }
 397 }
 398 
 399 /* ----------------------------------------------------------------------- */
 400 
 401 static int msp3400c_detect_stereo(struct i2c_client *client)
 402 {
 403         struct msp_state *state = to_state(i2c_get_clientdata(client));
 404         int val;
 405         int rxsubchans = state->rxsubchans;
 406         int newnicam = state->nicam_on;
 407         int update = 0;
 408 
 409         switch (state->mode) {
 410         case MSP_MODE_FM_TERRA:
 411                 val = msp_read_dsp(client, 0x18);
 412                 if (val > 32767)
 413                         val -= 65536;
 414                 dev_dbg_lvl(&client->dev, 2, msp_debug,
 415                         "stereo detect register: %d\n", val);
 416                 if (val > 8192) {
 417                         rxsubchans = V4L2_TUNER_SUB_STEREO;
 418                 } else if (val < -4096) {
 419                         rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
 420                 } else {
 421                         rxsubchans = V4L2_TUNER_SUB_MONO;
 422                 }
 423                 newnicam = 0;
 424                 break;
 425         case MSP_MODE_FM_NICAM1:
 426         case MSP_MODE_FM_NICAM2:
 427         case MSP_MODE_AM_NICAM:
 428                 val = msp_read_dem(client, 0x23);
 429                 dev_dbg_lvl(&client->dev, 2, msp_debug, "nicam sync=%d, mode=%d\n",
 430                         val & 1, (val & 0x1e) >> 1);
 431 
 432                 if (val & 1) {
 433                         /* nicam synced */
 434                         switch ((val & 0x1e) >> 1)  {
 435                         case 0:
 436                         case 8:
 437                                 rxsubchans = V4L2_TUNER_SUB_STEREO;
 438                                 break;
 439                         case 1:
 440                         case 9:
 441                                 rxsubchans = V4L2_TUNER_SUB_MONO;
 442                                 break;
 443                         case 2:
 444                         case 10:
 445                                 rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
 446                                 break;
 447                         default:
 448                                 rxsubchans = V4L2_TUNER_SUB_MONO;
 449                                 break;
 450                         }
 451                         newnicam = 1;
 452                 } else {
 453                         newnicam = 0;
 454                         rxsubchans = V4L2_TUNER_SUB_MONO;
 455                 }
 456                 break;
 457         }
 458         if (rxsubchans != state->rxsubchans) {
 459                 update = 1;
 460                 dev_dbg_lvl(&client->dev, 1, msp_debug,
 461                         "watch: rxsubchans %02x => %02x\n",
 462                         state->rxsubchans, rxsubchans);
 463                 state->rxsubchans = rxsubchans;
 464         }
 465         if (newnicam != state->nicam_on) {
 466                 update = 1;
 467                 dev_dbg_lvl(&client->dev, 1, msp_debug, "watch: nicam %d => %d\n",
 468                         state->nicam_on, newnicam);
 469                 state->nicam_on = newnicam;
 470         }
 471         return update;
 472 }
 473 
 474 /*
 475  * A kernel thread for msp3400 control -- we don't want to block the
 476  * in the ioctl while doing the sound carrier & stereo detect
 477  */
 478 /* stereo/multilang monitoring */
 479 static void watch_stereo(struct i2c_client *client)
 480 {
 481         struct msp_state *state = to_state(i2c_get_clientdata(client));
 482 
 483         if (msp_detect_stereo(client))
 484                 msp_set_audmode(client);
 485 
 486         if (msp_once)
 487                 state->watch_stereo = 0;
 488 }
 489 
 490 int msp3400c_thread(void *data)
 491 {
 492         struct i2c_client *client = data;
 493         struct msp_state *state = to_state(i2c_get_clientdata(client));
 494         struct msp3400c_carrier_detect *cd;
 495         int count, max1, max2, val1, val2, val, i;
 496 
 497         dev_dbg_lvl(&client->dev, 1, msp_debug, "msp3400 daemon started\n");
 498         state->detected_std = V4L2_STD_ALL;
 499         set_freezable();
 500         for (;;) {
 501                 dev_dbg_lvl(&client->dev, 2, msp_debug, "msp3400 thread: sleep\n");
 502                 msp_sleep(state, -1);
 503                 dev_dbg_lvl(&client->dev, 2, msp_debug, "msp3400 thread: wakeup\n");
 504 
 505 restart:
 506                 dev_dbg_lvl(&client->dev, 2, msp_debug, "thread: restart scan\n");
 507                 state->restart = 0;
 508                 if (kthread_should_stop())
 509                         break;
 510 
 511                 if (state->radio || MSP_MODE_EXTERN == state->mode) {
 512                         /* no carrier scan, just unmute */
 513                         dev_dbg_lvl(&client->dev, 1, msp_debug,
 514                                 "thread: no carrier scan\n");
 515                         state->scan_in_progress = 0;
 516                         msp_update_volume(state);
 517                         continue;
 518                 }
 519 
 520                 /* mute audio */
 521                 state->scan_in_progress = 1;
 522                 msp_update_volume(state);
 523 
 524                 msp3400c_set_mode(client, MSP_MODE_AM_DETECT);
 525                 val1 = val2 = 0;
 526                 max1 = max2 = -1;
 527                 state->watch_stereo = 0;
 528                 state->nicam_on = 0;
 529 
 530                 /* wait for tuner to settle down after a channel change */
 531                 if (msp_sleep(state, 200))
 532                         goto restart;
 533 
 534                 /* carrier detect pass #1 -- main carrier */
 535                 cd = msp3400c_carrier_detect_main;
 536                 count = ARRAY_SIZE(msp3400c_carrier_detect_main);
 537 
 538                 if (msp_amsound && (state->v4l2_std & V4L2_STD_SECAM)) {
 539                         /* autodetect doesn't work well with AM ... */
 540                         max1 = 3;
 541                         count = 0;
 542                         dev_dbg_lvl(&client->dev, 1, msp_debug, "AM sound override\n");
 543                 }
 544 
 545                 for (i = 0; i < count; i++) {
 546                         msp3400c_set_carrier(client, cd[i].cdo, cd[i].cdo);
 547                         if (msp_sleep(state, 100))
 548                                 goto restart;
 549                         val = msp_read_dsp(client, 0x1b);
 550                         if (val > 32767)
 551                                 val -= 65536;
 552                         if (val1 < val)
 553                                 val1 = val, max1 = i;
 554                         dev_dbg_lvl(&client->dev, 1, msp_debug,
 555                                 "carrier1 val: %5d / %s\n", val, cd[i].name);
 556                 }
 557 
 558                 /* carrier detect pass #2 -- second (stereo) carrier */
 559                 switch (max1) {
 560                 case 1: /* 5.5 */
 561                         cd = msp3400c_carrier_detect_55;
 562                         count = ARRAY_SIZE(msp3400c_carrier_detect_55);
 563                         break;
 564                 case 3: /* 6.5 */
 565                         cd = msp3400c_carrier_detect_65;
 566                         count = ARRAY_SIZE(msp3400c_carrier_detect_65);
 567                         break;
 568                 case 0: /* 4.5 */
 569                 case 2: /* 6.0 */
 570                 default:
 571                         cd = NULL;
 572                         count = 0;
 573                         break;
 574                 }
 575 
 576                 if (msp_amsound && (state->v4l2_std & V4L2_STD_SECAM)) {
 577                         /* autodetect doesn't work well with AM ... */
 578                         cd = NULL;
 579                         count = 0;
 580                         max2 = 0;
 581                 }
 582                 for (i = 0; i < count; i++) {
 583                         msp3400c_set_carrier(client, cd[i].cdo, cd[i].cdo);
 584                         if (msp_sleep(state, 100))
 585                                 goto restart;
 586                         val = msp_read_dsp(client, 0x1b);
 587                         if (val > 32767)
 588                                 val -= 65536;
 589                         if (val2 < val)
 590                                 val2 = val, max2 = i;
 591                         dev_dbg_lvl(&client->dev, 1, msp_debug,
 592                                 "carrier2 val: %5d / %s\n", val, cd[i].name);
 593                 }
 594 
 595                 /* program the msp3400 according to the results */
 596                 state->main = msp3400c_carrier_detect_main[max1].cdo;
 597                 switch (max1) {
 598                 case 1: /* 5.5 */
 599                         state->detected_std = V4L2_STD_BG | V4L2_STD_PAL_H;
 600                         if (max2 == 0) {
 601                                 /* B/G FM-stereo */
 602                                 state->second = msp3400c_carrier_detect_55[max2].cdo;
 603                                 msp3400c_set_mode(client, MSP_MODE_FM_TERRA);
 604                                 state->watch_stereo = 1;
 605                         } else if (max2 == 1 && state->has_nicam) {
 606                                 /* B/G NICAM */
 607                                 state->second = msp3400c_carrier_detect_55[max2].cdo;
 608                                 msp3400c_set_mode(client, MSP_MODE_FM_NICAM1);
 609                                 state->nicam_on = 1;
 610                                 state->watch_stereo = 1;
 611                         } else {
 612                                 goto no_second;
 613                         }
 614                         break;
 615                 case 2: /* 6.0 */
 616                         /* PAL I NICAM */
 617                         state->detected_std = V4L2_STD_PAL_I;
 618                         state->second = MSP_CARRIER(6.552);
 619                         msp3400c_set_mode(client, MSP_MODE_FM_NICAM2);
 620                         state->nicam_on = 1;
 621                         state->watch_stereo = 1;
 622                         break;
 623                 case 3: /* 6.5 */
 624                         if (max2 == 1 || max2 == 2) {
 625                                 /* D/K FM-stereo */
 626                                 state->second = msp3400c_carrier_detect_65[max2].cdo;
 627                                 msp3400c_set_mode(client, MSP_MODE_FM_TERRA);
 628                                 state->watch_stereo = 1;
 629                                 state->detected_std = V4L2_STD_DK;
 630                         } else if (max2 == 0 && (state->v4l2_std & V4L2_STD_SECAM)) {
 631                                 /* L NICAM or AM-mono */
 632                                 state->second = msp3400c_carrier_detect_65[max2].cdo;
 633                                 msp3400c_set_mode(client, MSP_MODE_AM_NICAM);
 634                                 state->watch_stereo = 1;
 635                                 state->detected_std = V4L2_STD_L;
 636                         } else if (max2 == 0 && state->has_nicam) {
 637                                 /* D/K NICAM */
 638                                 state->second = msp3400c_carrier_detect_65[max2].cdo;
 639                                 msp3400c_set_mode(client, MSP_MODE_FM_NICAM1);
 640                                 state->nicam_on = 1;
 641                                 state->watch_stereo = 1;
 642                                 state->detected_std = V4L2_STD_DK;
 643                         } else {
 644                                 goto no_second;
 645                         }
 646                         break;
 647                 case 0: /* 4.5 */
 648                         state->detected_std = V4L2_STD_MN;
 649                         /* fall-through */
 650                 default:
 651 no_second:
 652                         state->second = msp3400c_carrier_detect_main[max1].cdo;
 653                         msp3400c_set_mode(client, MSP_MODE_FM_TERRA);
 654                         break;
 655                 }
 656                 msp3400c_set_carrier(client, state->second, state->main);
 657 
 658                 /* unmute */
 659                 state->scan_in_progress = 0;
 660                 msp3400c_set_audmode(client);
 661                 msp_update_volume(state);
 662 
 663                 if (msp_debug)
 664                         msp3400c_print_mode(client);
 665 
 666                 /* monitor tv audio mode, the first time don't wait
 667                    so long to get a quick stereo/bilingual result */
 668                 count = 3;
 669                 while (state->watch_stereo) {
 670                         if (msp_sleep(state, count ? 1000 : 5000))
 671                                 goto restart;
 672                         if (count)
 673                                 count--;
 674                         watch_stereo(client);
 675                 }
 676         }
 677         dev_dbg_lvl(&client->dev, 1, msp_debug, "thread: exit\n");
 678         return 0;
 679 }
 680 
 681 
 682 int msp3410d_thread(void *data)
 683 {
 684         struct i2c_client *client = data;
 685         struct msp_state *state = to_state(i2c_get_clientdata(client));
 686         int val, i, std, count;
 687 
 688         dev_dbg_lvl(&client->dev, 1, msp_debug, "msp3410 daemon started\n");
 689         state->detected_std = V4L2_STD_ALL;
 690         set_freezable();
 691         for (;;) {
 692                 dev_dbg_lvl(&client->dev, 2, msp_debug, "msp3410 thread: sleep\n");
 693                 msp_sleep(state, -1);
 694                 dev_dbg_lvl(&client->dev, 2, msp_debug, "msp3410 thread: wakeup\n");
 695 
 696 restart:
 697                 dev_dbg_lvl(&client->dev, 2, msp_debug, "thread: restart scan\n");
 698                 state->restart = 0;
 699                 if (kthread_should_stop())
 700                         break;
 701 
 702                 if (state->mode == MSP_MODE_EXTERN) {
 703                         /* no carrier scan needed, just unmute */
 704                         dev_dbg_lvl(&client->dev, 1, msp_debug,
 705                                 "thread: no carrier scan\n");
 706                         state->scan_in_progress = 0;
 707                         msp_update_volume(state);
 708                         continue;
 709                 }
 710 
 711                 /* mute audio */
 712                 state->scan_in_progress = 1;
 713                 msp_update_volume(state);
 714 
 715                 /* start autodetect. Note: autodetect is not supported for
 716                    NTSC-M and radio, hence we force the standard in those
 717                    cases. */
 718                 if (state->radio)
 719                         std = 0x40;
 720                 else
 721                         std = (state->v4l2_std & V4L2_STD_NTSC) ? 0x20 : 1;
 722                 state->watch_stereo = 0;
 723                 state->nicam_on = 0;
 724 
 725                 /* wait for tuner to settle down after a channel change */
 726                 if (msp_sleep(state, 200))
 727                         goto restart;
 728 
 729                 if (msp_debug)
 730                         dev_dbg_lvl(&client->dev, 2, msp_debug,
 731                                 "setting standard: %s (0x%04x)\n",
 732                                 msp_standard_std_name(std), std);
 733 
 734                 if (std != 1) {
 735                         /* programmed some specific mode */
 736                         val = std;
 737                 } else {
 738                         /* triggered autodetect */
 739                         msp_write_dem(client, 0x20, std);
 740                         for (;;) {
 741                                 if (msp_sleep(state, 100))
 742                                         goto restart;
 743 
 744                                 /* check results */
 745                                 val = msp_read_dem(client, 0x7e);
 746                                 if (val < 0x07ff)
 747                                         break;
 748                                 dev_dbg_lvl(&client->dev, 2, msp_debug,
 749                                         "detection still in progress\n");
 750                         }
 751                 }
 752                 for (i = 0; msp_stdlist[i].name != NULL; i++)
 753                         if (msp_stdlist[i].retval == val)
 754                                 break;
 755                 dev_dbg_lvl(&client->dev, 1, msp_debug, "current standard: %s (0x%04x)\n",
 756                         msp_standard_std_name(val), val);
 757                 state->main   = msp_stdlist[i].main;
 758                 state->second = msp_stdlist[i].second;
 759                 state->std = val;
 760                 state->rxsubchans = V4L2_TUNER_SUB_MONO;
 761 
 762                 if (msp_amsound && !state->radio &&
 763                     (state->v4l2_std & V4L2_STD_SECAM) && (val != 0x0009)) {
 764                         /* autodetection has failed, let backup */
 765                         dev_dbg_lvl(&client->dev, 1, msp_debug, "autodetection failed, switching to backup standard: %s (0x%04x)\n",
 766                                 msp_stdlist[8].name ?
 767                                         msp_stdlist[8].name : "unknown", val);
 768                         state->std = val = 0x0009;
 769                         msp_write_dem(client, 0x20, val);
 770                 } else {
 771                         state->detected_std = msp_standard_std(state->std);
 772                 }
 773 
 774                 /* set stereo */
 775                 switch (val) {
 776                 case 0x0008: /* B/G NICAM */
 777                 case 0x000a: /* I NICAM */
 778                 case 0x000b: /* D/K NICAM */
 779                         if (val == 0x000a)
 780                                 state->mode = MSP_MODE_FM_NICAM2;
 781                         else
 782                                 state->mode = MSP_MODE_FM_NICAM1;
 783                         /* just turn on stereo */
 784                         state->nicam_on = 1;
 785                         state->watch_stereo = 1;
 786                         break;
 787                 case 0x0009:
 788                         state->mode = MSP_MODE_AM_NICAM;
 789                         state->nicam_on = 1;
 790                         state->watch_stereo = 1;
 791                         break;
 792                 case 0x0020: /* BTSC */
 793                         /* The pre-'G' models only have BTSC-mono */
 794                         state->mode = MSP_MODE_BTSC;
 795                         break;
 796                 case 0x0040: /* FM radio */
 797                         state->mode = MSP_MODE_FM_RADIO;
 798                         state->rxsubchans = V4L2_TUNER_SUB_STEREO;
 799                         /* not needed in theory if we have radio, but
 800                            short programming enables carrier mute */
 801                         msp3400c_set_mode(client, MSP_MODE_FM_RADIO);
 802                         msp3400c_set_carrier(client, MSP_CARRIER(10.7),
 803                                             MSP_CARRIER(10.7));
 804                         break;
 805                 case 0x0002:
 806                 case 0x0003:
 807                 case 0x0004:
 808                 case 0x0005:
 809                         state->mode = MSP_MODE_FM_TERRA;
 810                         state->watch_stereo = 1;
 811                         break;
 812                 }
 813 
 814                 /* set various prescales */
 815                 msp_write_dsp(client, 0x0d, 0x1900); /* scart */
 816                 msp_write_dsp(client, 0x0e, 0x3000); /* FM */
 817                 if (state->has_nicam)
 818                         msp_write_dsp(client, 0x10, 0x5a00); /* nicam */
 819 
 820                 if (state->has_i2s_conf)
 821                         msp_write_dem(client, 0x40, state->i2s_mode);
 822 
 823                 /* unmute */
 824                 msp3400c_set_audmode(client);
 825                 state->scan_in_progress = 0;
 826                 msp_update_volume(state);
 827 
 828                 /* monitor tv audio mode, the first time don't wait
 829                    so long to get a quick stereo/bilingual result */
 830                 count = 3;
 831                 while (state->watch_stereo) {
 832                         if (msp_sleep(state, count ? 1000 : 5000))
 833                                 goto restart;
 834                         if (count)
 835                                 count--;
 836                         watch_stereo(client);
 837                 }
 838         }
 839         dev_dbg_lvl(&client->dev, 1, msp_debug, "thread: exit\n");
 840         return 0;
 841 }
 842 
 843 /* ----------------------------------------------------------------------- */
 844 
 845 /* msp34xxG + (autoselect no-thread)
 846  * this one uses both automatic standard detection and automatic sound
 847  * select which are available in the newer G versions
 848  * struct msp: only norm, acb and source are really used in this mode
 849  */
 850 
 851 static int msp34xxg_modus(struct i2c_client *client)
 852 {
 853         struct msp_state *state = to_state(i2c_get_clientdata(client));
 854 
 855         if (state->radio) {
 856                 dev_dbg_lvl(&client->dev, 1, msp_debug, "selected radio modus\n");
 857                 return 0x0001;
 858         }
 859         if (state->v4l2_std == V4L2_STD_NTSC_M_JP) {
 860                 dev_dbg_lvl(&client->dev, 1, msp_debug, "selected M (EIA-J) modus\n");
 861                 return 0x4001;
 862         }
 863         if (state->v4l2_std == V4L2_STD_NTSC_M_KR) {
 864                 dev_dbg_lvl(&client->dev, 1, msp_debug, "selected M (A2) modus\n");
 865                 return 0x0001;
 866         }
 867         if (state->v4l2_std == V4L2_STD_SECAM_L) {
 868                 dev_dbg_lvl(&client->dev, 1, msp_debug, "selected SECAM-L modus\n");
 869                 return 0x6001;
 870         }
 871         if (state->v4l2_std & V4L2_STD_MN) {
 872                 dev_dbg_lvl(&client->dev, 1, msp_debug, "selected M (BTSC) modus\n");
 873                 return 0x2001;
 874         }
 875         return 0x7001;
 876 }
 877 
 878 static void msp34xxg_set_source(struct i2c_client *client, u16 reg, int in)
 879 {
 880         struct msp_state *state = to_state(i2c_get_clientdata(client));
 881         int source, matrix;
 882 
 883         switch (state->audmode) {
 884         case V4L2_TUNER_MODE_MONO:
 885                 source = 0; /* mono only */
 886                 matrix = 0x30;
 887                 break;
 888         case V4L2_TUNER_MODE_LANG2:
 889                 source = 4; /* stereo or B */
 890                 matrix = 0x10;
 891                 break;
 892         case V4L2_TUNER_MODE_LANG1_LANG2:
 893                 source = 1; /* stereo or A|B */
 894                 matrix = 0x20;
 895                 break;
 896         case V4L2_TUNER_MODE_LANG1:
 897                 source = 3; /* stereo or A */
 898                 matrix = 0x00;
 899                 break;
 900         case V4L2_TUNER_MODE_STEREO:
 901         default:
 902                 source = 3; /* stereo or A */
 903                 matrix = 0x20;
 904                 break;
 905         }
 906 
 907         if (in == MSP_DSP_IN_TUNER)
 908                 source = (source << 8) | 0x20;
 909         /* the msp34x2g puts the MAIN_AVC, MAIN and AUX sources in 12, 13, 14
 910            instead of 11, 12, 13. So we add one for that msp version. */
 911         else if (in >= MSP_DSP_IN_MAIN_AVC && state->has_dolby_pro_logic)
 912                 source = ((in + 1) << 8) | matrix;
 913         else
 914                 source = (in << 8) | matrix;
 915 
 916         dev_dbg_lvl(&client->dev, 1, msp_debug,
 917                 "set source to %d (0x%x) for output %02x\n", in, source, reg);
 918         msp_write_dsp(client, reg, source);
 919 }
 920 
 921 static void msp34xxg_set_sources(struct i2c_client *client)
 922 {
 923         struct msp_state *state = to_state(i2c_get_clientdata(client));
 924         u32 in = state->route_in;
 925 
 926         msp34xxg_set_source(client, 0x0008, (in >> 4) & 0xf);
 927         /* quasi-peak detector is set to same input as the loudspeaker (MAIN) */
 928         msp34xxg_set_source(client, 0x000c, (in >> 4) & 0xf);
 929         msp34xxg_set_source(client, 0x0009, (in >> 8) & 0xf);
 930         msp34xxg_set_source(client, 0x000a, (in >> 12) & 0xf);
 931         if (state->has_scart2_out)
 932                 msp34xxg_set_source(client, 0x0041, (in >> 16) & 0xf);
 933         msp34xxg_set_source(client, 0x000b, (in >> 20) & 0xf);
 934 }
 935 
 936 /* (re-)initialize the msp34xxg */
 937 static void msp34xxg_reset(struct i2c_client *client)
 938 {
 939         struct msp_state *state = to_state(i2c_get_clientdata(client));
 940         int tuner = (state->route_in >> 3) & 1;
 941         int modus;
 942 
 943         /* initialize std to 1 (autodetect) to signal that no standard is
 944            selected yet. */
 945         state->std = 1;
 946 
 947         msp_reset(client);
 948 
 949         if (state->has_i2s_conf)
 950                 msp_write_dem(client, 0x40, state->i2s_mode);
 951 
 952         /* step-by-step initialisation, as described in the manual */
 953         modus = msp34xxg_modus(client);
 954         modus |= tuner ? 0x100 : 0;
 955         msp_write_dem(client, 0x30, modus);
 956 
 957         /* write the dsps that may have an influence on
 958            standard/audio autodetection right now */
 959         msp34xxg_set_sources(client);
 960 
 961         msp_write_dsp(client, 0x0d, 0x1900); /* scart */
 962         msp_write_dsp(client, 0x0e, 0x3000); /* FM */
 963         if (state->has_nicam)
 964                 msp_write_dsp(client, 0x10, 0x5a00); /* nicam */
 965 
 966         /* set identification threshold. Personally, I
 967          * I set it to a higher value than the default
 968          * of 0x190 to ignore noisy stereo signals.
 969          * this needs tuning. (recommended range 0x00a0-0x03c0)
 970          * 0x7f0 = forced mono mode
 971          *
 972          * a2 threshold for stereo/bilingual.
 973          * Note: this register is part of the Manual/Compatibility mode.
 974          * It is supported by all 'G'-family chips.
 975          */
 976         msp_write_dem(client, 0x22, msp_stereo_thresh);
 977 }
 978 
 979 int msp34xxg_thread(void *data)
 980 {
 981         struct i2c_client *client = data;
 982         struct msp_state *state = to_state(i2c_get_clientdata(client));
 983         int val, i;
 984 
 985         dev_dbg_lvl(&client->dev, 1, msp_debug, "msp34xxg daemon started\n");
 986         state->detected_std = V4L2_STD_ALL;
 987         set_freezable();
 988         for (;;) {
 989                 dev_dbg_lvl(&client->dev, 2, msp_debug, "msp34xxg thread: sleep\n");
 990                 msp_sleep(state, -1);
 991                 dev_dbg_lvl(&client->dev, 2, msp_debug, "msp34xxg thread: wakeup\n");
 992 
 993 restart:
 994                 dev_dbg_lvl(&client->dev, 1, msp_debug, "thread: restart scan\n");
 995                 state->restart = 0;
 996                 if (kthread_should_stop())
 997                         break;
 998 
 999                 if (state->mode == MSP_MODE_EXTERN) {
1000                         /* no carrier scan needed, just unmute */
1001                         dev_dbg_lvl(&client->dev, 1, msp_debug,
1002                                 "thread: no carrier scan\n");
1003                         state->scan_in_progress = 0;
1004                         msp_update_volume(state);
1005                         continue;
1006                 }
1007 
1008                 /* setup the chip*/
1009                 msp34xxg_reset(client);
1010                 state->std = state->radio ? 0x40 :
1011                         (state->force_btsc && msp_standard == 1) ? 32 : msp_standard;
1012                 msp_write_dem(client, 0x20, state->std);
1013                 /* start autodetect */
1014                 if (state->std != 1)
1015                         goto unmute;
1016 
1017                 /* watch autodetect */
1018                 dev_dbg_lvl(&client->dev, 1, msp_debug,
1019                         "started autodetect, waiting for result\n");
1020                 for (i = 0; i < 10; i++) {
1021                         if (msp_sleep(state, 100))
1022                                 goto restart;
1023 
1024                         /* check results */
1025                         val = msp_read_dem(client, 0x7e);
1026                         if (val < 0x07ff) {
1027                                 state->std = val;
1028                                 break;
1029                         }
1030                         dev_dbg_lvl(&client->dev, 2, msp_debug,
1031                                 "detection still in progress\n");
1032                 }
1033                 if (state->std == 1) {
1034                         dev_dbg_lvl(&client->dev, 1, msp_debug,
1035                                 "detection still in progress after 10 tries. giving up.\n");
1036                         continue;
1037                 }
1038 
1039 unmute:
1040                 dev_dbg_lvl(&client->dev, 1, msp_debug,
1041                         "detected standard: %s (0x%04x)\n",
1042                         msp_standard_std_name(state->std), state->std);
1043                 state->detected_std = msp_standard_std(state->std);
1044 
1045                 if (state->std == 9) {
1046                         /* AM NICAM mode */
1047                         msp_write_dsp(client, 0x0e, 0x7c00);
1048                 }
1049 
1050                 /* unmute: dispatch sound to scart output, set scart volume */
1051                 msp_update_volume(state);
1052 
1053                 /* restore ACB */
1054                 if (msp_write_dsp(client, 0x13, state->acb))
1055                         return -1;
1056 
1057                 /* the periodic stereo/SAP check is only relevant for
1058                    the 0x20 standard (BTSC) */
1059                 if (state->std != 0x20)
1060                         continue;
1061 
1062                 state->watch_stereo = 1;
1063 
1064                 /* monitor tv audio mode, the first time don't wait
1065                    in order to get a quick stereo/SAP update */
1066                 watch_stereo(client);
1067                 while (state->watch_stereo) {
1068                         watch_stereo(client);
1069                         if (msp_sleep(state, 5000))
1070                                 goto restart;
1071                 }
1072         }
1073         dev_dbg_lvl(&client->dev, 1, msp_debug, "thread: exit\n");
1074         return 0;
1075 }
1076 
1077 static int msp34xxg_detect_stereo(struct i2c_client *client)
1078 {
1079         struct msp_state *state = to_state(i2c_get_clientdata(client));
1080         int status = msp_read_dem(client, 0x0200);
1081         int is_bilingual = status & 0x100;
1082         int is_stereo = status & 0x40;
1083         int oldrx = state->rxsubchans;
1084 
1085         if (state->mode == MSP_MODE_EXTERN)
1086                 return 0;
1087 
1088         state->rxsubchans = 0;
1089         if (is_stereo)
1090                 state->rxsubchans = V4L2_TUNER_SUB_STEREO;
1091         else
1092                 state->rxsubchans = V4L2_TUNER_SUB_MONO;
1093         if (is_bilingual) {
1094                 if (state->std == 0x20)
1095                         state->rxsubchans |= V4L2_TUNER_SUB_SAP;
1096                 else
1097                         state->rxsubchans =
1098                                 V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
1099         }
1100         dev_dbg_lvl(&client->dev, 1, msp_debug,
1101                 "status=0x%x, stereo=%d, bilingual=%d -> rxsubchans=%d\n",
1102                 status, is_stereo, is_bilingual, state->rxsubchans);
1103         return (oldrx != state->rxsubchans);
1104 }
1105 
1106 static void msp34xxg_set_audmode(struct i2c_client *client)
1107 {
1108         struct msp_state *state = to_state(i2c_get_clientdata(client));
1109 
1110         if (state->std == 0x20) {
1111                if ((state->rxsubchans & V4L2_TUNER_SUB_SAP) &&
1112                    (state->audmode == V4L2_TUNER_MODE_LANG1_LANG2 ||
1113                     state->audmode == V4L2_TUNER_MODE_LANG2)) {
1114                         msp_write_dem(client, 0x20, 0x21);
1115                } else {
1116                         msp_write_dem(client, 0x20, 0x20);
1117                }
1118         }
1119 
1120         msp34xxg_set_sources(client);
1121 }
1122 
1123 void msp_set_audmode(struct i2c_client *client)
1124 {
1125         struct msp_state *state = to_state(i2c_get_clientdata(client));
1126 
1127         switch (state->opmode) {
1128         case OPMODE_MANUAL:
1129         case OPMODE_AUTODETECT:
1130                 msp3400c_set_audmode(client);
1131                 break;
1132         case OPMODE_AUTOSELECT:
1133                 msp34xxg_set_audmode(client);
1134                 break;
1135         }
1136 }
1137 
1138 int msp_detect_stereo(struct i2c_client *client)
1139 {
1140         struct msp_state *state  = to_state(i2c_get_clientdata(client));
1141 
1142         switch (state->opmode) {
1143         case OPMODE_MANUAL:
1144         case OPMODE_AUTODETECT:
1145                 return msp3400c_detect_stereo(client);
1146         case OPMODE_AUTOSELECT:
1147                 return msp34xxg_detect_stereo(client);
1148         }
1149         return 0;
1150 }
1151 

/* [<][>][^][v][top][bottom][index][help] */