This source file includes following definitions.
- tda1002x_cu1216_tuner_set
- read_pwm
- vp2040_frontend_init
1
2
3
4
5
6
7
8
9 #include <linux/signal.h>
10 #include <linux/sched.h>
11 #include <linux/interrupt.h>
12
13 #include <media/dmxdev.h>
14 #include <media/dvbdev.h>
15 #include <media/dvb_demux.h>
16 #include <media/dvb_frontend.h>
17 #include <media/dvb_net.h>
18
19 #include "tda1002x.h"
20 #include "mantis_common.h"
21 #include "mantis_ioc.h"
22 #include "mantis_dvb.h"
23 #include "mantis_vp2040.h"
24
25 #define MANTIS_MODEL_NAME "VP-2040"
26 #define MANTIS_DEV_TYPE "DVB-C"
27
28 static struct tda1002x_config vp2040_tda1002x_cu1216_config = {
29 .demod_address = 0x18 >> 1,
30 .invert = 1,
31 };
32
33 static struct tda10023_config vp2040_tda10023_cu1216_config = {
34 .demod_address = 0x18 >> 1,
35 .invert = 1,
36 };
37
38 static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe)
39 {
40 struct dtv_frontend_properties *p = &fe->dtv_property_cache;
41 struct mantis_pci *mantis = fe->dvb->priv;
42 struct i2c_adapter *adapter = &mantis->adapter;
43
44 u8 buf[6];
45 struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf)};
46 int i;
47
48 #define CU1216_IF 36125000
49 #define TUNER_MUL 62500
50
51 u32 div = (p->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL;
52
53 buf[0] = (div >> 8) & 0x7f;
54 buf[1] = div & 0xff;
55 buf[2] = 0xce;
56 buf[3] = (p->frequency < 150000000 ? 0x01 :
57 p->frequency < 445000000 ? 0x02 : 0x04);
58 buf[4] = 0xde;
59 buf[5] = 0x20;
60
61 if (fe->ops.i2c_gate_ctrl)
62 fe->ops.i2c_gate_ctrl(fe, 1);
63
64 if (i2c_transfer(adapter, &msg, 1) != 1)
65 return -EIO;
66
67
68 msg.flags = I2C_M_RD;
69 msg.len = 1;
70 for (i = 0; i < 20; i++) {
71 if (fe->ops.i2c_gate_ctrl)
72 fe->ops.i2c_gate_ctrl(fe, 1);
73
74 if (i2c_transfer(adapter, &msg, 1) == 1 && (buf[0] & 0x40))
75 break;
76
77 msleep(10);
78 }
79
80
81 msg.flags = 0;
82 msg.len = 2;
83 msg.buf = &buf[2];
84 buf[2] &= ~0x40;
85 if (fe->ops.i2c_gate_ctrl)
86 fe->ops.i2c_gate_ctrl(fe, 1);
87
88 if (i2c_transfer(adapter, &msg, 1) != 1)
89 return -EIO;
90
91 return 0;
92 }
93
94 static u8 read_pwm(struct mantis_pci *mantis)
95 {
96 struct i2c_adapter *adapter = &mantis->adapter;
97
98 u8 b = 0xff;
99 u8 pwm;
100 struct i2c_msg msg[] = {
101 {.addr = 0x50, .flags = 0, .buf = &b, .len = 1},
102 {.addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1}
103 };
104
105 if ((i2c_transfer(adapter, msg, 2) != 2)
106 || (pwm == 0xff))
107 pwm = 0x48;
108
109 return pwm;
110 }
111
112 static int vp2040_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
113 {
114 struct i2c_adapter *adapter = &mantis->adapter;
115
116 int err = 0;
117
118 err = mantis_frontend_power(mantis, POWER_ON);
119 if (err == 0) {
120 mantis_frontend_soft_reset(mantis);
121 msleep(250);
122
123 dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
124 fe = dvb_attach(tda10021_attach, &vp2040_tda1002x_cu1216_config,
125 adapter,
126 read_pwm(mantis));
127
128 if (fe) {
129 dprintk(MANTIS_ERROR, 1,
130 "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
131 vp2040_tda1002x_cu1216_config.demod_address);
132 } else {
133 fe = dvb_attach(tda10023_attach, &vp2040_tda10023_cu1216_config,
134 adapter,
135 read_pwm(mantis));
136
137 if (fe) {
138 dprintk(MANTIS_ERROR, 1,
139 "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x",
140 vp2040_tda1002x_cu1216_config.demod_address);
141 }
142 }
143
144 if (fe) {
145 fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set;
146 dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success");
147 } else {
148 return -1;
149 }
150 } else {
151 dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
152 adapter->name,
153 err);
154
155 return -EIO;
156 }
157 mantis->fe = fe;
158 dprintk(MANTIS_DEBUG, 1, "Done!");
159
160 return 0;
161 }
162
163 struct mantis_hwconfig vp2040_config = {
164 .model_name = MANTIS_MODEL_NAME,
165 .dev_type = MANTIS_DEV_TYPE,
166 .ts_size = MANTIS_TS_204,
167
168 .baud_rate = MANTIS_BAUD_9600,
169 .parity = MANTIS_PARITY_NONE,
170 .bytes = 0,
171
172 .frontend_init = vp2040_frontend_init,
173 .power = GPIF_A12,
174 .reset = GPIF_A13,
175 };