root/drivers/media/pci/saa7164/saa7164-fw.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. saa7164_dl_wait_ack
  2. saa7164_dl_wait_clr
  3. saa7164_downloadimage
  4. saa7164_downloadfirmware

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  *  Driver for the NXP SAA7164 PCIe bridge
   4  *
   5  *  Copyright (c) 2010-2015 Steven Toth <stoth@kernellabs.com>
   6  */
   7 
   8 #include <linux/firmware.h>
   9 #include <linux/slab.h>
  10 
  11 #include "saa7164.h"
  12 
  13 #define SAA7164_REV2_FIRMWARE           "NXP7164-2010-03-10.1.fw"
  14 #define SAA7164_REV2_FIRMWARE_SIZE      4019072
  15 
  16 #define SAA7164_REV3_FIRMWARE           "NXP7164-2010-03-10.1.fw"
  17 #define SAA7164_REV3_FIRMWARE_SIZE      4019072
  18 
  19 struct fw_header {
  20         u32     firmwaresize;
  21         u32     bslsize;
  22         u32     reserved;
  23         u32     version;
  24 };
  25 
  26 static int saa7164_dl_wait_ack(struct saa7164_dev *dev, u32 reg)
  27 {
  28         u32 timeout = SAA_DEVICE_TIMEOUT;
  29         while ((saa7164_readl(reg) & 0x01) == 0) {
  30                 timeout -= 10;
  31                 if (timeout == 0) {
  32                         printk(KERN_ERR "%s() timeout (no d/l ack)\n",
  33                                 __func__);
  34                         return -EBUSY;
  35                 }
  36                 msleep(100);
  37         }
  38 
  39         return 0;
  40 }
  41 
  42 static int saa7164_dl_wait_clr(struct saa7164_dev *dev, u32 reg)
  43 {
  44         u32 timeout = SAA_DEVICE_TIMEOUT;
  45         while (saa7164_readl(reg) & 0x01) {
  46                 timeout -= 10;
  47                 if (timeout == 0) {
  48                         printk(KERN_ERR "%s() timeout (no d/l clr)\n",
  49                                 __func__);
  50                         return -EBUSY;
  51                 }
  52                 msleep(100);
  53         }
  54 
  55         return 0;
  56 }
  57 
  58 /* TODO: move dlflags into dev-> and change to write/readl/b */
  59 /* TODO: Excessive levels of debug */
  60 static int saa7164_downloadimage(struct saa7164_dev *dev, u8 *src, u32 srcsize,
  61                                  u32 dlflags, u8 __iomem *dst, u32 dstsize)
  62 {
  63         u32 reg, timeout, offset;
  64         u8 *srcbuf = NULL;
  65         int ret;
  66 
  67         u32 dlflag = dlflags;
  68         u32 dlflag_ack = dlflag + 4;
  69         u32 drflag = dlflag_ack + 4;
  70         u32 drflag_ack = drflag + 4;
  71         u32 bleflag = drflag_ack + 4;
  72 
  73         dprintk(DBGLVL_FW,
  74                 "%s(image=%p, size=%d, flags=0x%x, dst=%p, dstsize=0x%x)\n",
  75                 __func__, src, srcsize, dlflags, dst, dstsize);
  76 
  77         if ((src == NULL) || (dst == NULL)) {
  78                 ret = -EIO;
  79                 goto out;
  80         }
  81 
  82         srcbuf = kzalloc(4 * 1048576, GFP_KERNEL);
  83         if (NULL == srcbuf) {
  84                 ret = -ENOMEM;
  85                 goto out;
  86         }
  87 
  88         if (srcsize > (4*1048576)) {
  89                 ret = -ENOMEM;
  90                 goto out;
  91         }
  92 
  93         memcpy(srcbuf, src, srcsize);
  94 
  95         dprintk(DBGLVL_FW, "%s() dlflag = 0x%x\n", __func__, dlflag);
  96         dprintk(DBGLVL_FW, "%s() dlflag_ack = 0x%x\n", __func__, dlflag_ack);
  97         dprintk(DBGLVL_FW, "%s() drflag = 0x%x\n", __func__, drflag);
  98         dprintk(DBGLVL_FW, "%s() drflag_ack = 0x%x\n", __func__, drflag_ack);
  99         dprintk(DBGLVL_FW, "%s() bleflag = 0x%x\n", __func__, bleflag);
 100 
 101         reg = saa7164_readl(dlflag);
 102         dprintk(DBGLVL_FW, "%s() dlflag (0x%x)= 0x%x\n", __func__, dlflag, reg);
 103         if (reg == 1)
 104                 dprintk(DBGLVL_FW,
 105                         "%s() Download flag already set, please reboot\n",
 106                         __func__);
 107 
 108         /* Indicate download start */
 109         saa7164_writel(dlflag, 1);
 110         ret = saa7164_dl_wait_ack(dev, dlflag_ack);
 111         if (ret < 0)
 112                 goto out;
 113 
 114         /* Ack download start, then wait for wait */
 115         saa7164_writel(dlflag, 0);
 116         ret = saa7164_dl_wait_clr(dev, dlflag_ack);
 117         if (ret < 0)
 118                 goto out;
 119 
 120         /* Deal with the raw firmware, in the appropriate chunk size */
 121         for (offset = 0; srcsize > dstsize;
 122                 srcsize -= dstsize, offset += dstsize) {
 123 
 124                 dprintk(DBGLVL_FW, "%s() memcpy %d\n", __func__, dstsize);
 125                 memcpy_toio(dst, srcbuf + offset, dstsize);
 126 
 127                 /* Flag the data as ready */
 128                 saa7164_writel(drflag, 1);
 129                 ret = saa7164_dl_wait_ack(dev, drflag_ack);
 130                 if (ret < 0)
 131                         goto out;
 132 
 133                 /* Wait for indication data was received */
 134                 saa7164_writel(drflag, 0);
 135                 ret = saa7164_dl_wait_clr(dev, drflag_ack);
 136                 if (ret < 0)
 137                         goto out;
 138 
 139         }
 140 
 141         dprintk(DBGLVL_FW, "%s() memcpy(l) %d\n", __func__, dstsize);
 142         /* Write last block to the device */
 143         memcpy_toio(dst, srcbuf+offset, srcsize);
 144 
 145         /* Flag the data as ready */
 146         saa7164_writel(drflag, 1);
 147         ret = saa7164_dl_wait_ack(dev, drflag_ack);
 148         if (ret < 0)
 149                 goto out;
 150 
 151         saa7164_writel(drflag, 0);
 152         timeout = 0;
 153         while (saa7164_readl(bleflag) != SAA_DEVICE_IMAGE_BOOTING) {
 154                 if (saa7164_readl(bleflag) & SAA_DEVICE_IMAGE_CORRUPT) {
 155                         printk(KERN_ERR "%s() image corrupt\n", __func__);
 156                         ret = -EBUSY;
 157                         goto out;
 158                 }
 159 
 160                 if (saa7164_readl(bleflag) & SAA_DEVICE_MEMORY_CORRUPT) {
 161                         printk(KERN_ERR "%s() device memory corrupt\n",
 162                                 __func__);
 163                         ret = -EBUSY;
 164                         goto out;
 165                 }
 166 
 167                 msleep(10); /* Checkpatch throws a < 20ms warning */
 168                 if (timeout++ > 60)
 169                         break;
 170         }
 171 
 172         printk(KERN_INFO "%s() Image downloaded, booting...\n", __func__);
 173 
 174         ret = saa7164_dl_wait_clr(dev, drflag_ack);
 175         if (ret < 0)
 176                 goto out;
 177 
 178         printk(KERN_INFO "%s() Image booted successfully.\n", __func__);
 179         ret = 0;
 180 
 181 out:
 182         kfree(srcbuf);
 183         return ret;
 184 }
 185 
 186 /* TODO: Excessive debug */
 187 /* Load the firmware. Optionally it can be in ROM or newer versions
 188  * can be on disk, saving the expense of the ROM hardware. */
 189 int saa7164_downloadfirmware(struct saa7164_dev *dev)
 190 {
 191         /* u32 second_timeout = 60 * SAA_DEVICE_TIMEOUT; */
 192         u32 tmp, filesize, version, err_flags, first_timeout, fwlength;
 193         u32 second_timeout, updatebootloader = 1, bootloadersize = 0;
 194         const struct firmware *fw = NULL;
 195         struct fw_header *hdr, *boothdr = NULL, *fwhdr;
 196         u32 bootloaderversion = 0, fwloadersize;
 197         u8 *bootloaderoffset = NULL, *fwloaderoffset;
 198         char *fwname;
 199         int ret;
 200 
 201         dprintk(DBGLVL_FW, "%s()\n", __func__);
 202 
 203         if (saa7164_boards[dev->board].chiprev == SAA7164_CHIP_REV2) {
 204                 fwname = SAA7164_REV2_FIRMWARE;
 205                 fwlength = SAA7164_REV2_FIRMWARE_SIZE;
 206         } else {
 207                 fwname = SAA7164_REV3_FIRMWARE;
 208                 fwlength = SAA7164_REV3_FIRMWARE_SIZE;
 209         }
 210 
 211         version = saa7164_getcurrentfirmwareversion(dev);
 212 
 213         if (version == 0x00) {
 214 
 215                 second_timeout = 100;
 216                 first_timeout = 100;
 217                 err_flags = saa7164_readl(SAA_BOOTLOADERERROR_FLAGS);
 218                 dprintk(DBGLVL_FW, "%s() err_flags = %x\n",
 219                         __func__, err_flags);
 220 
 221                 while (err_flags != SAA_DEVICE_IMAGE_BOOTING) {
 222                         dprintk(DBGLVL_FW, "%s() err_flags = %x\n",
 223                                 __func__, err_flags);
 224                         msleep(10); /* Checkpatch throws a < 20ms warning */
 225 
 226                         if (err_flags & SAA_DEVICE_IMAGE_CORRUPT) {
 227                                 printk(KERN_ERR "%s() firmware corrupt\n",
 228                                         __func__);
 229                                 break;
 230                         }
 231                         if (err_flags & SAA_DEVICE_MEMORY_CORRUPT) {
 232                                 printk(KERN_ERR "%s() device memory corrupt\n",
 233                                         __func__);
 234                                 break;
 235                         }
 236                         if (err_flags & SAA_DEVICE_NO_IMAGE) {
 237                                 printk(KERN_ERR "%s() no first image\n",
 238                                 __func__);
 239                                 break;
 240                         }
 241                         if (err_flags & SAA_DEVICE_IMAGE_SEARCHING) {
 242                                 first_timeout -= 10;
 243                                 if (first_timeout == 0) {
 244                                         printk(KERN_ERR
 245                                                 "%s() no first image\n",
 246                                                 __func__);
 247                                         break;
 248                                 }
 249                         } else if (err_flags & SAA_DEVICE_IMAGE_LOADING) {
 250                                 second_timeout -= 10;
 251                                 if (second_timeout == 0) {
 252                                         printk(KERN_ERR
 253                                         "%s() FW load time exceeded\n",
 254                                                 __func__);
 255                                         break;
 256                                 }
 257                         } else {
 258                                 second_timeout -= 10;
 259                                 if (second_timeout == 0) {
 260                                         printk(KERN_ERR
 261                                         "%s() Unknown bootloader flags 0x%x\n",
 262                                                 __func__, err_flags);
 263                                         break;
 264                                 }
 265                         }
 266 
 267                         err_flags = saa7164_readl(SAA_BOOTLOADERERROR_FLAGS);
 268                 } /* While != Booting */
 269 
 270                 if (err_flags == SAA_DEVICE_IMAGE_BOOTING) {
 271                         dprintk(DBGLVL_FW, "%s() Loader 1 has loaded.\n",
 272                                 __func__);
 273                         first_timeout = SAA_DEVICE_TIMEOUT;
 274                         second_timeout = 60 * SAA_DEVICE_TIMEOUT;
 275                         second_timeout = 100;
 276 
 277                         err_flags = saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS);
 278                         dprintk(DBGLVL_FW, "%s() err_flags2 = %x\n",
 279                                 __func__, err_flags);
 280                         while (err_flags != SAA_DEVICE_IMAGE_BOOTING) {
 281                                 dprintk(DBGLVL_FW, "%s() err_flags2 = %x\n",
 282                                         __func__, err_flags);
 283                                 msleep(10); /* Checkpatch throws a < 20ms warning */
 284 
 285                                 if (err_flags & SAA_DEVICE_IMAGE_CORRUPT) {
 286                                         printk(KERN_ERR
 287                                                 "%s() firmware corrupt\n",
 288                                                 __func__);
 289                                         break;
 290                                 }
 291                                 if (err_flags & SAA_DEVICE_MEMORY_CORRUPT) {
 292                                         printk(KERN_ERR
 293                                                 "%s() device memory corrupt\n",
 294                                                 __func__);
 295                                         break;
 296                                 }
 297                                 if (err_flags & SAA_DEVICE_NO_IMAGE) {
 298                                         printk(KERN_ERR "%s() no second image\n",
 299                                                 __func__);
 300                                         break;
 301                                 }
 302                                 if (err_flags & SAA_DEVICE_IMAGE_SEARCHING) {
 303                                         first_timeout -= 10;
 304                                         if (first_timeout == 0) {
 305                                                 printk(KERN_ERR
 306                                                 "%s() no second image\n",
 307                                                         __func__);
 308                                                 break;
 309                                         }
 310                                 } else if (err_flags &
 311                                         SAA_DEVICE_IMAGE_LOADING) {
 312                                         second_timeout -= 10;
 313                                         if (second_timeout == 0) {
 314                                                 printk(KERN_ERR
 315                                                 "%s() FW load time exceeded\n",
 316                                                         __func__);
 317                                                 break;
 318                                         }
 319                                 } else {
 320                                         second_timeout -= 10;
 321                                         if (second_timeout == 0) {
 322                                                 printk(KERN_ERR
 323                                         "%s() Unknown bootloader flags 0x%x\n",
 324                                                         __func__, err_flags);
 325                                                 break;
 326                                         }
 327                                 }
 328 
 329                                 err_flags =
 330                                 saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS);
 331                         } /* err_flags != SAA_DEVICE_IMAGE_BOOTING */
 332 
 333                         dprintk(DBGLVL_FW, "%s() Loader flags 1:0x%x 2:0x%x.\n",
 334                                 __func__,
 335                                 saa7164_readl(SAA_BOOTLOADERERROR_FLAGS),
 336                                 saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS));
 337 
 338                 } /* err_flags == SAA_DEVICE_IMAGE_BOOTING */
 339 
 340                 /* It's possible for both firmwares to have booted,
 341                  * but that doesn't mean they've finished booting yet.
 342                  */
 343                 if ((saa7164_readl(SAA_BOOTLOADERERROR_FLAGS) ==
 344                         SAA_DEVICE_IMAGE_BOOTING) &&
 345                         (saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS) ==
 346                         SAA_DEVICE_IMAGE_BOOTING)) {
 347 
 348 
 349                         dprintk(DBGLVL_FW, "%s() Loader 2 has loaded.\n",
 350                                 __func__);
 351 
 352                         first_timeout = SAA_DEVICE_TIMEOUT;
 353                         while (first_timeout) {
 354                                 msleep(10); /* Checkpatch throws a < 20ms warning */
 355 
 356                                 version =
 357                                         saa7164_getcurrentfirmwareversion(dev);
 358                                 if (version) {
 359                                         dprintk(DBGLVL_FW,
 360                                         "%s() All f/w loaded successfully\n",
 361                                                 __func__);
 362                                         break;
 363                                 } else {
 364                                         first_timeout -= 10;
 365                                         if (first_timeout == 0) {
 366                                                 printk(KERN_ERR
 367                                                 "%s() FW did not boot\n",
 368                                                         __func__);
 369                                                 break;
 370                                         }
 371                                 }
 372                         }
 373                 }
 374                 version = saa7164_getcurrentfirmwareversion(dev);
 375         } /* version == 0 */
 376 
 377         /* Has the firmware really booted? */
 378         if ((saa7164_readl(SAA_BOOTLOADERERROR_FLAGS) ==
 379                 SAA_DEVICE_IMAGE_BOOTING) &&
 380                 (saa7164_readl(SAA_SECONDSTAGEERROR_FLAGS) ==
 381                 SAA_DEVICE_IMAGE_BOOTING) && (version == 0)) {
 382 
 383                 printk(KERN_ERR
 384                         "%s() The firmware hung, probably bad firmware\n",
 385                         __func__);
 386 
 387                 /* Tell the second stage loader we have a deadlock */
 388                 saa7164_writel(SAA_DEVICE_DEADLOCK_DETECTED_OFFSET,
 389                         SAA_DEVICE_DEADLOCK_DETECTED);
 390 
 391                 saa7164_getfirmwarestatus(dev);
 392 
 393                 return -ENOMEM;
 394         }
 395 
 396         dprintk(DBGLVL_FW, "Device has Firmware Version %d.%d.%d.%d\n",
 397                 (version & 0x0000fc00) >> 10,
 398                 (version & 0x000003e0) >> 5,
 399                 (version & 0x0000001f),
 400                 (version & 0xffff0000) >> 16);
 401 
 402         /* Load the firmware from the disk if required */
 403         if (version == 0) {
 404 
 405                 printk(KERN_INFO "%s() Waiting for firmware upload (%s)\n",
 406                         __func__, fwname);
 407 
 408                 ret = request_firmware(&fw, fwname, &dev->pci->dev);
 409                 if (ret) {
 410                         printk(KERN_ERR "%s() Upload failed. (file not found?)\n",
 411                                __func__);
 412                         return -ENOMEM;
 413                 }
 414 
 415                 printk(KERN_INFO "%s() firmware read %zu bytes.\n",
 416                         __func__, fw->size);
 417 
 418                 if (fw->size != fwlength) {
 419                         printk(KERN_ERR "saa7164: firmware incorrect size %zu != %u\n",
 420                                 fw->size, fwlength);
 421                         ret = -ENOMEM;
 422                         goto out;
 423                 }
 424 
 425                 printk(KERN_INFO "%s() firmware loaded.\n", __func__);
 426 
 427                 hdr = (struct fw_header *)fw->data;
 428                 printk(KERN_INFO "Firmware file header part 1:\n");
 429                 printk(KERN_INFO " .FirmwareSize = 0x%x\n", hdr->firmwaresize);
 430                 printk(KERN_INFO " .BSLSize = 0x%x\n", hdr->bslsize);
 431                 printk(KERN_INFO " .Reserved = 0x%x\n", hdr->reserved);
 432                 printk(KERN_INFO " .Version = 0x%x\n", hdr->version);
 433 
 434                 /* Retrieve bootloader if reqd */
 435                 if ((hdr->firmwaresize == 0) && (hdr->bslsize == 0))
 436                         /* Second bootloader in the firmware file */
 437                         filesize = hdr->reserved * 16;
 438                 else
 439                         filesize = (hdr->firmwaresize + hdr->bslsize) *
 440                                 16 + sizeof(struct fw_header);
 441 
 442                 printk(KERN_INFO "%s() SecBootLoader.FileSize = %d\n",
 443                         __func__, filesize);
 444 
 445                 /* Get bootloader (if reqd) and firmware header */
 446                 if ((hdr->firmwaresize == 0) && (hdr->bslsize == 0)) {
 447                         /* Second boot loader is required */
 448 
 449                         /* Get the loader header */
 450                         boothdr = (struct fw_header *)(fw->data +
 451                                 sizeof(struct fw_header));
 452 
 453                         bootloaderversion =
 454                                 saa7164_readl(SAA_DEVICE_2ND_VERSION);
 455                         dprintk(DBGLVL_FW, "Onboard BootLoader:\n");
 456                         dprintk(DBGLVL_FW, "->Flag 0x%x\n",
 457                                 saa7164_readl(SAA_BOOTLOADERERROR_FLAGS));
 458                         dprintk(DBGLVL_FW, "->Ack 0x%x\n",
 459                                 saa7164_readl(SAA_DATAREADY_FLAG_ACK));
 460                         dprintk(DBGLVL_FW, "->FW Version 0x%x\n", version);
 461                         dprintk(DBGLVL_FW, "->Loader Version 0x%x\n",
 462                                 bootloaderversion);
 463 
 464                         if ((saa7164_readl(SAA_BOOTLOADERERROR_FLAGS) ==
 465                                 0x03) && (saa7164_readl(SAA_DATAREADY_FLAG_ACK)
 466                                 == 0x00) && (version == 0x00)) {
 467 
 468                                 dprintk(DBGLVL_FW, "BootLoader version in  rom %d.%d.%d.%d\n",
 469                                         (bootloaderversion & 0x0000fc00) >> 10,
 470                                         (bootloaderversion & 0x000003e0) >> 5,
 471                                         (bootloaderversion & 0x0000001f),
 472                                         (bootloaderversion & 0xffff0000) >> 16
 473                                         );
 474                                 dprintk(DBGLVL_FW, "BootLoader version in file %d.%d.%d.%d\n",
 475                                         (boothdr->version & 0x0000fc00) >> 10,
 476                                         (boothdr->version & 0x000003e0) >> 5,
 477                                         (boothdr->version & 0x0000001f),
 478                                         (boothdr->version & 0xffff0000) >> 16
 479                                         );
 480 
 481                                 if (bootloaderversion == boothdr->version)
 482                                         updatebootloader = 0;
 483                         }
 484 
 485                         /* Calculate offset to firmware header */
 486                         tmp = (boothdr->firmwaresize + boothdr->bslsize) * 16 +
 487                                 (sizeof(struct fw_header) +
 488                                 sizeof(struct fw_header));
 489 
 490                         fwhdr = (struct fw_header *)(fw->data+tmp);
 491                 } else {
 492                         /* No second boot loader */
 493                         fwhdr = hdr;
 494                 }
 495 
 496                 dprintk(DBGLVL_FW, "Firmware version in file %d.%d.%d.%d\n",
 497                         (fwhdr->version & 0x0000fc00) >> 10,
 498                         (fwhdr->version & 0x000003e0) >> 5,
 499                         (fwhdr->version & 0x0000001f),
 500                         (fwhdr->version & 0xffff0000) >> 16
 501                         );
 502 
 503                 if (version == fwhdr->version) {
 504                         /* No download, firmware already on board */
 505                         ret = 0;
 506                         goto out;
 507                 }
 508 
 509                 if ((hdr->firmwaresize == 0) && (hdr->bslsize == 0)) {
 510                         if (updatebootloader) {
 511                                 /* Get ready to upload the bootloader */
 512                                 bootloadersize = (boothdr->firmwaresize +
 513                                         boothdr->bslsize) * 16 +
 514                                         sizeof(struct fw_header);
 515 
 516                                 bootloaderoffset = (u8 *)(fw->data +
 517                                         sizeof(struct fw_header));
 518 
 519                                 dprintk(DBGLVL_FW, "bootloader d/l starts.\n");
 520                                 printk(KERN_INFO "%s() FirmwareSize = 0x%x\n",
 521                                         __func__, boothdr->firmwaresize);
 522                                 printk(KERN_INFO "%s() BSLSize = 0x%x\n",
 523                                         __func__, boothdr->bslsize);
 524                                 printk(KERN_INFO "%s() Reserved = 0x%x\n",
 525                                         __func__, boothdr->reserved);
 526                                 printk(KERN_INFO "%s() Version = 0x%x\n",
 527                                         __func__, boothdr->version);
 528                                 ret = saa7164_downloadimage(
 529                                         dev,
 530                                         bootloaderoffset,
 531                                         bootloadersize,
 532                                         SAA_DOWNLOAD_FLAGS,
 533                                         dev->bmmio + SAA_DEVICE_DOWNLOAD_OFFSET,
 534                                         SAA_DEVICE_BUFFERBLOCKSIZE);
 535                                 if (ret < 0) {
 536                                         printk(KERN_ERR
 537                                                 "bootloader d/l has failed\n");
 538                                         goto out;
 539                                 }
 540                                 dprintk(DBGLVL_FW,
 541                                         "bootloader download complete.\n");
 542 
 543                         }
 544 
 545                         printk(KERN_ERR "starting firmware download(2)\n");
 546                         bootloadersize = (boothdr->firmwaresize +
 547                                 boothdr->bslsize) * 16 +
 548                                 sizeof(struct fw_header);
 549 
 550                         bootloaderoffset =
 551                                 (u8 *)(fw->data + sizeof(struct fw_header));
 552 
 553                         fwloaderoffset = bootloaderoffset + bootloadersize;
 554 
 555                         /* TODO: fix this bounds overrun here with old f/ws */
 556                         fwloadersize = (fwhdr->firmwaresize + fwhdr->bslsize) *
 557                                 16 + sizeof(struct fw_header);
 558 
 559                         ret = saa7164_downloadimage(
 560                                 dev,
 561                                 fwloaderoffset,
 562                                 fwloadersize,
 563                                 SAA_DEVICE_2ND_DOWNLOADFLAG_OFFSET,
 564                                 dev->bmmio + SAA_DEVICE_2ND_DOWNLOAD_OFFSET,
 565                                 SAA_DEVICE_2ND_BUFFERBLOCKSIZE);
 566                         if (ret < 0) {
 567                                 printk(KERN_ERR "firmware download failed\n");
 568                                 goto out;
 569                         }
 570                         printk(KERN_ERR "firmware download complete.\n");
 571 
 572                 } else {
 573 
 574                         /* No bootloader update reqd, download firmware only */
 575                         printk(KERN_ERR "starting firmware download(3)\n");
 576 
 577                         ret = saa7164_downloadimage(
 578                                 dev,
 579                                 (u8 *)fw->data,
 580                                 fw->size,
 581                                 SAA_DOWNLOAD_FLAGS,
 582                                 dev->bmmio + SAA_DEVICE_DOWNLOAD_OFFSET,
 583                                 SAA_DEVICE_BUFFERBLOCKSIZE);
 584                         if (ret < 0) {
 585                                 printk(KERN_ERR "firmware download failed\n");
 586                                 goto out;
 587                         }
 588                         printk(KERN_ERR "firmware download complete.\n");
 589                 }
 590         }
 591 
 592         dev->firmwareloaded = 1;
 593         ret = 0;
 594 
 595 out:
 596         release_firmware(fw);
 597         return ret;
 598 }

/* [<][>][^][v][top][bottom][index][help] */