root/drivers/media/pci/ddbridge/ddbridge-regs.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2 /*
   3  * ddbridge-regs.h: Digital Devices PCIe bridge driver
   4  *
   5  * Copyright (C) 2010-2017 Digital Devices GmbH
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License
   9  * version 2 only, as published by the Free Software Foundation.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  */
  16 
  17 #ifndef __DDBRIDGE_REGS_H__
  18 #define __DDBRIDGE_REGS_H__
  19 
  20 /* ------------------------------------------------------------------------- */
  21 /* SPI Controller */
  22 
  23 #define SPI_CONTROL     0x10
  24 #define SPI_DATA        0x14
  25 
  26 /* ------------------------------------------------------------------------- */
  27 /* GPIO */
  28 
  29 #define GPIO_OUTPUT      0x20
  30 #define GPIO_INPUT       0x24
  31 #define GPIO_DIRECTION   0x28
  32 
  33 /* ------------------------------------------------------------------------- */
  34 
  35 #define BOARD_CONTROL    0x30
  36 
  37 /* ------------------------------------------------------------------------- */
  38 
  39 /* Interrupt controller
  40  * How many MSI's are available depends on HW (Min 2 max 8)
  41  * How many are usable also depends on Host platform
  42  */
  43 
  44 #define INTERRUPT_BASE   (0x40)
  45 
  46 #define INTERRUPT_ENABLE (INTERRUPT_BASE + 0x00)
  47 #define MSI1_ENABLE      (INTERRUPT_BASE + 0x04)
  48 #define MSI2_ENABLE      (INTERRUPT_BASE + 0x08)
  49 #define MSI3_ENABLE      (INTERRUPT_BASE + 0x0C)
  50 #define MSI4_ENABLE      (INTERRUPT_BASE + 0x10)
  51 #define MSI5_ENABLE      (INTERRUPT_BASE + 0x14)
  52 #define MSI6_ENABLE      (INTERRUPT_BASE + 0x18)
  53 #define MSI7_ENABLE      (INTERRUPT_BASE + 0x1C)
  54 
  55 #define INTERRUPT_STATUS (INTERRUPT_BASE + 0x20)
  56 #define INTERRUPT_ACK    (INTERRUPT_BASE + 0x20)
  57 
  58 /* Temperature Monitor ( 2x LM75A @ 0x90,0x92 I2c ) */
  59 #define TEMPMON_BASE                    (0x1c0)
  60 #define TEMPMON_CONTROL                 (TEMPMON_BASE + 0x00)
  61 
  62 #define TEMPMON_CONTROL_AUTOSCAN        (0x00000002)
  63 #define TEMPMON_CONTROL_INTENABLE       (0x00000004)
  64 #define TEMPMON_CONTROL_OVERTEMP        (0x00008000)
  65 
  66 /* SHORT Temperature in Celsius x 256 */
  67 #define TEMPMON_SENSOR0                 (TEMPMON_BASE + 0x04)
  68 #define TEMPMON_SENSOR1                 (TEMPMON_BASE + 0x08)
  69 
  70 #define TEMPMON_FANCONTROL              (TEMPMON_BASE + 0x10)
  71 
  72 /* ------------------------------------------------------------------------- */
  73 /* I2C Master Controller */
  74 
  75 #define I2C_COMMAND     (0x00)
  76 #define I2C_TIMING      (0x04)
  77 #define I2C_TASKLENGTH  (0x08)     /* High read, low write */
  78 #define I2C_TASKADDRESS (0x0C)     /* High read, low write */
  79 #define I2C_MONITOR     (0x1C)
  80 
  81 #define I2C_SPEED_400   (0x04030404)
  82 #define I2C_SPEED_100   (0x13121313)
  83 
  84 /* ------------------------------------------------------------------------- */
  85 /* DMA  Controller */
  86 
  87 #define DMA_BASE_WRITE        (0x100)
  88 #define DMA_BASE_READ         (0x140)
  89 
  90 #define TS_CONTROL(_io)         ((_io)->regs + 0x00)
  91 #define TS_CONTROL2(_io)        ((_io)->regs + 0x04)
  92 
  93 /* ------------------------------------------------------------------------- */
  94 /* DMA  Buffer */
  95 
  96 #define DMA_BUFFER_CONTROL(_dma)       ((_dma)->regs + 0x00)
  97 #define DMA_BUFFER_ACK(_dma)           ((_dma)->regs + 0x04)
  98 #define DMA_BUFFER_CURRENT(_dma)       ((_dma)->regs + 0x08)
  99 #define DMA_BUFFER_SIZE(_dma)          ((_dma)->regs + 0x0c)
 100 
 101 /* ------------------------------------------------------------------------- */
 102 /* CI Interface (only CI-Bridge) */
 103 
 104 #define CI_BASE                         (0x400)
 105 #define CI_CONTROL(i)                   (CI_BASE + (i) * 32 + 0x00)
 106 
 107 #define CI_DO_ATTRIBUTE_RW(i)           (CI_BASE + (i) * 32 + 0x04)
 108 #define CI_DO_IO_RW(i)                  (CI_BASE + (i) * 32 + 0x08)
 109 #define CI_READDATA(i)                  (CI_BASE + (i) * 32 + 0x0c)
 110 #define CI_DO_READ_ATTRIBUTES(i)        (CI_BASE + (i) * 32 + 0x10)
 111 
 112 #define CI_RESET_CAM                    (0x00000001)
 113 #define CI_POWER_ON                     (0x00000002)
 114 #define CI_ENABLE                       (0x00000004)
 115 #define CI_BYPASS_DISABLE               (0x00000010)
 116 
 117 #define CI_CAM_READY                    (0x00010000)
 118 #define CI_CAM_DETECT                   (0x00020000)
 119 #define CI_READY                        (0x80000000)
 120 
 121 #define CI_READ_CMD                     (0x40000000)
 122 #define CI_WRITE_CMD                    (0x80000000)
 123 
 124 #define CI_BUFFER_BASE                  (0x3000)
 125 #define CI_BUFFER_SIZE                  (0x0800)
 126 
 127 #define CI_BUFFER(i)                    (CI_BUFFER_BASE + (i) * CI_BUFFER_SIZE)
 128 
 129 /* ------------------------------------------------------------------------- */
 130 /* LNB commands (mxl5xx / Max S8) */
 131 
 132 #define LNB_BASE                        (0x400)
 133 #define LNB_CONTROL(i)                  (LNB_BASE + (i) * 0x20 + 0x00)
 134 
 135 #define LNB_CMD                         (7ULL << 0)
 136 #define LNB_CMD_NOP                     0
 137 #define LNB_CMD_INIT                    1
 138 #define LNB_CMD_LOW                     3
 139 #define LNB_CMD_HIGH                    4
 140 #define LNB_CMD_OFF                     5
 141 #define LNB_CMD_DISEQC                  6
 142 
 143 #define LNB_BUSY                        BIT_ULL(4)
 144 #define LNB_TONE                        BIT_ULL(15)
 145 
 146 #define LNB_BUF_LEVEL(i)                (LNB_BASE + (i) * 0x20 + 0x10)
 147 #define LNB_BUF_WRITE(i)                (LNB_BASE + (i) * 0x20 + 0x14)
 148 
 149 #endif /* __DDBRIDGE_REGS_H__ */
/* [<][>][^][v][top][bottom][index][help] */