drivers/media/pci/solo6x10/solo6x10.h

/* [<][>][^][v][top][bottom][index][help] */
This source file includes following definitions.
solo_reg_read
solo_reg_write
solo_irq_on
solo_irq_off
   1 /* SPDX-License-Identifier: GPL-2.0-or-later */
   2 /*
   3  * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
   4  *
   5  * Original author:
   6  * Ben Collins <bcollins@ubuntu.com>
   7  *
   8  * Additional work by:
   9  * John Brooks <john.brooks@bluecherry.net>
  10  */
  11 
  12 #ifndef __SOLO6X10_H
  13 #define __SOLO6X10_H
  14 
  15 #include <linux/pci.h>
  16 #include <linux/i2c.h>
  17 #include <linux/mutex.h>
  18 #include <linux/list.h>
  19 #include <linux/wait.h>
  20 #include <linux/stringify.h>
  21 #include <linux/io.h>
  22 #include <linux/atomic.h>
  23 #include <linux/slab.h>
  24 #include <linux/videodev2.h>
  25 #include <linux/gpio/driver.h>
  26 
  27 #include <media/v4l2-dev.h>
  28 #include <media/v4l2-device.h>
  29 #include <media/v4l2-ctrls.h>
  30 #include <media/videobuf2-v4l2.h>
  31 
  32 #include "solo6x10-regs.h"
  33 
  34 #ifndef PCI_VENDOR_ID_SOFTLOGIC
  35 #define PCI_VENDOR_ID_SOFTLOGIC         0x9413
  36 #define PCI_DEVICE_ID_SOLO6010          0x6010
  37 #define PCI_DEVICE_ID_SOLO6110          0x6110
  38 #endif
  39 
  40 #ifndef PCI_VENDOR_ID_BLUECHERRY
  41 #define PCI_VENDOR_ID_BLUECHERRY        0x1BB3
  42 /* Neugent Softlogic 6010 based cards */
  43 #define PCI_DEVICE_ID_NEUSOLO_4         0x4304
  44 #define PCI_DEVICE_ID_NEUSOLO_9         0x4309
  45 #define PCI_DEVICE_ID_NEUSOLO_16        0x4310
  46 /* Bluecherry Softlogic 6010 based cards */
  47 #define PCI_DEVICE_ID_BC_SOLO_4         0x4E04
  48 #define PCI_DEVICE_ID_BC_SOLO_9         0x4E09
  49 #define PCI_DEVICE_ID_BC_SOLO_16        0x4E10
  50 /* Bluecherry Softlogic 6110 based cards */
  51 #define PCI_DEVICE_ID_BC_6110_4         0x5304
  52 #define PCI_DEVICE_ID_BC_6110_8         0x5308
  53 #define PCI_DEVICE_ID_BC_6110_16        0x5310
  54 #endif /* Bluecherry */
  55 
  56 /* Used in pci_device_id, and solo_dev->type */
  57 #define SOLO_DEV_6010                   0
  58 #define SOLO_DEV_6110                   1
  59 
  60 #define SOLO6X10_NAME                   "solo6x10"
  61 
  62 #define SOLO_MAX_CHANNELS               16
  63 
  64 #define SOLO6X10_VERSION                "3.0.0"
  65 
  66 /*
  67  * The SOLO6x10 actually has 8 i2c channels, but we only use 2.
  68  * 0 - Techwell chip(s)
  69  * 1 - SAA7128
  70  */
  71 #define SOLO_I2C_ADAPTERS               2
  72 #define SOLO_I2C_TW                     0
  73 #define SOLO_I2C_SAA                    1
  74 
  75 /* DMA Engine setup */
  76 #define SOLO_NR_P2M                     4
  77 #define SOLO_NR_P2M_DESC                256
  78 #define SOLO_P2M_DESC_SIZE              (SOLO_NR_P2M_DESC * 16)
  79 
  80 /* Encoder standard modes */
  81 #define SOLO_ENC_MODE_CIF               2
  82 #define SOLO_ENC_MODE_HD1               1
  83 #define SOLO_ENC_MODE_D1                9
  84 
  85 #define SOLO_DEFAULT_QP                 3
  86 
  87 #define SOLO_CID_CUSTOM_BASE            (V4L2_CID_USER_BASE | 0xf000)
  88 #define V4L2_CID_MOTION_TRACE           (SOLO_CID_CUSTOM_BASE+2)
  89 #define V4L2_CID_OSD_TEXT               (SOLO_CID_CUSTOM_BASE+3)
  90 
  91 /*
  92  * Motion thresholds are in a table of 64x64 samples, with
  93  * each sample representing 16x16 pixels of the source. In
  94  * effect, 44x30 samples are used for NTSC, and 44x36 for PAL.
  95  * The 5th sample on the 10th row is (10*64)+5 = 645.
  96  *
  97  * Internally it is stored as a 45x45 array (45*16 = 720, which is the
  98  * maximum PAL/NTSC width).
  99  */
 100 #define SOLO_MOTION_SZ (45)
 101 
 102 enum SOLO_I2C_STATE {
 103         IIC_STATE_IDLE,
 104         IIC_STATE_START,
 105         IIC_STATE_READ,
 106         IIC_STATE_WRITE,
 107         IIC_STATE_STOP
 108 };
 109 
 110 /* Defined in Table 4-16, Page 68-69 of the 6010 Datasheet */
 111 struct solo_p2m_desc {
 112         u32     ctrl;
 113         u32     cfg;
 114         u32     dma_addr;
 115         u32     ext_addr;
 116 };
 117 
 118 struct solo_p2m_dev {
 119         struct mutex            mutex;
 120         struct completion       completion;
 121         int                     desc_count;
 122         int                     desc_idx;
 123         struct solo_p2m_desc    *descs;
 124         int                     error;
 125 };
 126 
 127 #define OSD_TEXT_MAX            44
 128 
 129 struct solo_vb2_buf {
 130         struct vb2_v4l2_buffer vb;
 131         struct list_head list;
 132 };
 133 
 134 enum solo_enc_types {
 135         SOLO_ENC_TYPE_STD,
 136         SOLO_ENC_TYPE_EXT,
 137 };
 138 
 139 struct solo_enc_dev {
 140         struct solo_dev *solo_dev;
 141         /* V4L2 Items */
 142         struct v4l2_ctrl_handler hdl;
 143         struct v4l2_ctrl *md_thresholds;
 144         struct video_device     *vfd;
 145         /* General accounting */
 146         struct mutex            lock;
 147         spinlock_t              motion_lock;
 148         u8                      ch;
 149         u8                      mode, gop, qp, interlaced, interval;
 150         u8                      bw_weight;
 151         u16                     motion_thresh;
 152         bool                    motion_global;
 153         bool                    motion_enabled;
 154         u16                     width;
 155         u16                     height;
 156 
 157         /* OSD buffers */
 158         char                    osd_text[OSD_TEXT_MAX + 1];
 159         u8                      osd_buf[SOLO_EOSD_EXT_SIZE_MAX]
 160                                         __aligned(4);
 161 
 162         /* VOP stuff */
 163         u8                      vop[64];
 164         int                     vop_len;
 165         u8                      jpeg_header[1024];
 166         int                     jpeg_len;
 167 
 168         u32                     fmt;
 169         enum solo_enc_types     type;
 170         u32                     sequence;
 171         struct vb2_queue        vidq;
 172         struct list_head        vidq_active;
 173         int                     desc_count;
 174         int                     desc_nelts;
 175         struct solo_p2m_desc    *desc_items;
 176         dma_addr_t              desc_dma;
 177         spinlock_t              av_lock;
 178 };
 179 
 180 /* The SOLO6x10 PCI Device */
 181 struct solo_dev {
 182         /* General stuff */
 183         struct pci_dev          *pdev;
 184         int                     type;
 185         unsigned int            time_sync;
 186         unsigned int            usec_lsb;
 187         unsigned int            clock_mhz;
 188         u8 __iomem              *reg_base;
 189         int                     nr_chans;
 190         int                     nr_ext;
 191         u32                     irq_mask;
 192         u32                     motion_mask;
 193         struct v4l2_device      v4l2_dev;
 194 #ifdef CONFIG_GPIOLIB
 195         /* GPIO */
 196         struct gpio_chip        gpio_dev;
 197 #endif
 198 
 199         /* tw28xx accounting */
 200         u8                      tw2865, tw2864, tw2815;
 201         u8                      tw28_cnt;
 202 
 203         /* i2c related items */
 204         struct i2c_adapter      i2c_adap[SOLO_I2C_ADAPTERS];
 205         enum SOLO_I2C_STATE     i2c_state;
 206         struct mutex            i2c_mutex;
 207         int                     i2c_id;
 208         wait_queue_head_t       i2c_wait;
 209         struct i2c_msg          *i2c_msg;
 210         unsigned int            i2c_msg_num;
 211         unsigned int            i2c_msg_ptr;
 212 
 213         /* P2M DMA Engine */
 214         struct solo_p2m_dev     p2m_dev[SOLO_NR_P2M];
 215         atomic_t                p2m_count;
 216         int                     p2m_jiffies;
 217         unsigned int            p2m_timeouts;
 218 
 219         /* V4L2 Display items */
 220         struct video_device     *vfd;
 221         unsigned int            erasing;
 222         unsigned int            frame_blank;
 223         u8                      cur_disp_ch;
 224         wait_queue_head_t       disp_thread_wait;
 225         struct v4l2_ctrl_handler disp_hdl;
 226 
 227         /* V4L2 Encoder items */
 228         struct solo_enc_dev     *v4l2_enc[SOLO_MAX_CHANNELS];
 229         u16                     enc_bw_remain;
 230         /* IDX into hw mp4 encoder */
 231         u8                      enc_idx;
 232 
 233         /* Current video settings */
 234         u32                     video_type;
 235         u16                     video_hsize, video_vsize;
 236         u16                     vout_hstart, vout_vstart;
 237         u16                     vin_hstart, vin_vstart;
 238         u8                      fps;
 239 
 240         /* JPEG Qp setting */
 241         spinlock_t      jpeg_qp_lock;
 242         u32             jpeg_qp[2];
 243 
 244         /* Audio components */
 245         struct snd_card         *snd_card;
 246         struct snd_pcm          *snd_pcm;
 247         atomic_t                snd_users;
 248         int                     g723_hw_idx;
 249 
 250         /* sysfs stuffs */
 251         struct device           dev;
 252         int                     sdram_size;
 253         struct bin_attribute    sdram_attr;
 254         unsigned int            sys_config;
 255 
 256         /* Ring thread */
 257         struct task_struct      *ring_thread;
 258         wait_queue_head_t       ring_thread_wait;
 259 
 260         /* VOP_HEADER handling */
 261         void                    *vh_buf;
 262         dma_addr_t              vh_dma;
 263         int                     vh_size;
 264 
 265         /* Buffer handling */
 266         struct vb2_queue        vidq;
 267         u32                     sequence;
 268         struct task_struct      *kthread;
 269         struct mutex            lock;
 270         spinlock_t              slock;
 271         int                     old_write;
 272         struct list_head        vidq_active;
 273 };
 274 
 275 static inline u32 solo_reg_read(struct solo_dev *solo_dev, int reg)
 276 {
 277         return readl(solo_dev->reg_base + reg);
 278 }
 279 
 280 static inline void solo_reg_write(struct solo_dev *solo_dev, int reg,
 281                                   u32 data)
 282 {
 283         u16 val;
 284 
 285         writel(data, solo_dev->reg_base + reg);
 286         pci_read_config_word(solo_dev->pdev, PCI_STATUS, &val);
 287 }
 288 
 289 static inline void solo_irq_on(struct solo_dev *dev, u32 mask)
 290 {
 291         dev->irq_mask |= mask;
 292         solo_reg_write(dev, SOLO_IRQ_MASK, dev->irq_mask);
 293 }
 294 
 295 static inline void solo_irq_off(struct solo_dev *dev, u32 mask)
 296 {
 297         dev->irq_mask &= ~mask;
 298         solo_reg_write(dev, SOLO_IRQ_MASK, dev->irq_mask);
 299 }
 300 
 301 /* Init/exit routines for subsystems */
 302 int solo_disp_init(struct solo_dev *solo_dev);
 303 void solo_disp_exit(struct solo_dev *solo_dev);
 304 
 305 int solo_gpio_init(struct solo_dev *solo_dev);
 306 void solo_gpio_exit(struct solo_dev *solo_dev);
 307 
 308 int solo_i2c_init(struct solo_dev *solo_dev);
 309 void solo_i2c_exit(struct solo_dev *solo_dev);
 310 
 311 int solo_p2m_init(struct solo_dev *solo_dev);
 312 void solo_p2m_exit(struct solo_dev *solo_dev);
 313 
 314 int solo_v4l2_init(struct solo_dev *solo_dev, unsigned nr);
 315 void solo_v4l2_exit(struct solo_dev *solo_dev);
 316 
 317 int solo_enc_init(struct solo_dev *solo_dev);
 318 void solo_enc_exit(struct solo_dev *solo_dev);
 319 
 320 int solo_enc_v4l2_init(struct solo_dev *solo_dev, unsigned nr);
 321 void solo_enc_v4l2_exit(struct solo_dev *solo_dev);
 322 
 323 int solo_g723_init(struct solo_dev *solo_dev);
 324 void solo_g723_exit(struct solo_dev *solo_dev);
 325 
 326 /* ISR's */
 327 int solo_i2c_isr(struct solo_dev *solo_dev);
 328 void solo_p2m_isr(struct solo_dev *solo_dev, int id);
 329 void solo_p2m_error_isr(struct solo_dev *solo_dev);
 330 void solo_enc_v4l2_isr(struct solo_dev *solo_dev);
 331 void solo_g723_isr(struct solo_dev *solo_dev);
 332 void solo_motion_isr(struct solo_dev *solo_dev);
 333 void solo_video_in_isr(struct solo_dev *solo_dev);
 334 
 335 /* i2c read/write */
 336 u8 solo_i2c_readbyte(struct solo_dev *solo_dev, int id, u8 addr, u8 off);
 337 void solo_i2c_writebyte(struct solo_dev *solo_dev, int id, u8 addr, u8 off,
 338                         u8 data);
 339 
 340 /* P2M DMA */
 341 int solo_p2m_dma_t(struct solo_dev *solo_dev, int wr,
 342                    dma_addr_t dma_addr, u32 ext_addr, u32 size,
 343                    int repeat, u32 ext_size);
 344 int solo_p2m_dma(struct solo_dev *solo_dev, int wr,
 345                  void *sys_addr, u32 ext_addr, u32 size,
 346                  int repeat, u32 ext_size);
 347 void solo_p2m_fill_desc(struct solo_p2m_desc *desc, int wr,
 348                         dma_addr_t dma_addr, u32 ext_addr, u32 size,
 349                         int repeat, u32 ext_size);
 350 int solo_p2m_dma_desc(struct solo_dev *solo_dev,
 351                       struct solo_p2m_desc *desc, dma_addr_t desc_dma,
 352                       int desc_cnt);
 353 
 354 /* Global s_std ioctl */
 355 int solo_set_video_type(struct solo_dev *solo_dev, bool is_50hz);
 356 void solo_update_mode(struct solo_enc_dev *solo_enc);
 357 
 358 /* Set the threshold for motion detection */
 359 int solo_set_motion_threshold(struct solo_dev *solo_dev, u8 ch, u16 val);
 360 int solo_set_motion_block(struct solo_dev *solo_dev, u8 ch,
 361                 const u16 *thresholds);
 362 #define SOLO_DEF_MOT_THRESH             0x0300
 363 
 364 /* Write text on OSD */
 365 int solo_osd_print(struct solo_enc_dev *solo_enc);
 366 
 367 /* EEPROM commands */
 368 unsigned int solo_eeprom_ewen(struct solo_dev *solo_dev, int w_en);
 369 __be16 solo_eeprom_read(struct solo_dev *solo_dev, int loc);
 370 int solo_eeprom_write(struct solo_dev *solo_dev, int loc,
 371                       __be16 data);
 372 
 373 /* JPEG Qp functions */
 374 void solo_s_jpeg_qp(struct solo_dev *solo_dev, unsigned int ch,
 375                     unsigned int qp);
 376 int solo_g_jpeg_qp(struct solo_dev *solo_dev, unsigned int ch);
 377 
 378 #define CHK_FLAGS(v, flags) (((v) & (flags)) == (flags))
 379 
 380 #endif /* __SOLO6X10_H */
/* [<][>][^][v][top][bottom][index][help] */
root/drivers/media/pci/solo6x10/solo6x10.h

INCLUDED FROM

DEFINITIONS
