drivers/media/dvb-frontends/stb6100.c

/* [<][>][^][v][top][bottom][index][help] */
This source file includes following definitions.
stb6100_normalise_regs
stb6100_read_regs
stb6100_read_reg
stb6100_write_reg_range
stb6100_write_reg
stb6100_get_status
stb6100_get_bandwidth
stb6100_set_bandwidth
stb6100_get_frequency
stb6100_set_frequency
stb6100_sleep
stb6100_init
stb6100_set_params
stb6100_attach
stb6100_release
   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3         STB6100 Silicon Tuner
   4         Copyright (C) Manu Abraham (abraham.manu@gmail.com)
   5 
   6         Copyright (C) ST Microelectronics
   7 
   8 */
   9 
  10 #include <linux/init.h>
  11 #include <linux/kernel.h>
  12 #include <linux/module.h>
  13 #include <linux/slab.h>
  14 #include <linux/string.h>
  15 
  16 #include <media/dvb_frontend.h>
  17 #include "stb6100.h"
  18 
  19 static unsigned int verbose;
  20 module_param(verbose, int, 0644);
  21 
  22 /* Max transfer size done by I2C transfer functions */
  23 #define MAX_XFER_SIZE  64
  24 
  25 #define FE_ERROR                0
  26 #define FE_NOTICE               1
  27 #define FE_INFO                 2
  28 #define FE_DEBUG                3
  29 
  30 #define dprintk(x, y, z, format, arg...) do {                                           \
  31         if (z) {                                                                        \
  32                 if      ((x > FE_ERROR) && (x > y))                                     \
  33                         printk(KERN_ERR "%s: " format "\n", __func__ , ##arg);          \
  34                 else if ((x > FE_NOTICE) && (x > y))                                    \
  35                         printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg);       \
  36                 else if ((x > FE_INFO) && (x > y))                                      \
  37                         printk(KERN_INFO "%s: " format "\n", __func__ , ##arg);         \
  38                 else if ((x > FE_DEBUG) && (x > y))                                     \
  39                         printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg);        \
  40         } else {                                                                        \
  41                 if (x > y)                                                              \
  42                         printk(format, ##arg);                                          \
  43         }                                                                               \
  44 } while (0)
  45 
  46 struct stb6100_lkup {
  47         u32 val_low;
  48         u32 val_high;
  49         u8   reg;
  50 };
  51 
  52 static void stb6100_release(struct dvb_frontend *fe);
  53 
  54 static const struct stb6100_lkup lkup[] = {
  55         {       0,  950000, 0x0a },
  56         {  950000, 1000000, 0x0a },
  57         { 1000000, 1075000, 0x0c },
  58         { 1075000, 1200000, 0x00 },
  59         { 1200000, 1300000, 0x01 },
  60         { 1300000, 1370000, 0x02 },
  61         { 1370000, 1470000, 0x04 },
  62         { 1470000, 1530000, 0x05 },
  63         { 1530000, 1650000, 0x06 },
  64         { 1650000, 1800000, 0x08 },
  65         { 1800000, 1950000, 0x0a },
  66         { 1950000, 2150000, 0x0c },
  67         { 2150000, 9999999, 0x0c },
  68         {       0,       0, 0x00 }
  69 };
  70 
  71 /* Register names for easy debugging.   */
  72 static const char *stb6100_regnames[] = {
  73         [STB6100_LD]            = "LD",
  74         [STB6100_VCO]           = "VCO",
  75         [STB6100_NI]            = "NI",
  76         [STB6100_NF_LSB]        = "NF",
  77         [STB6100_K]             = "K",
  78         [STB6100_G]             = "G",
  79         [STB6100_F]             = "F",
  80         [STB6100_DLB]           = "DLB",
  81         [STB6100_TEST1]         = "TEST1",
  82         [STB6100_FCCK]          = "FCCK",
  83         [STB6100_LPEN]          = "LPEN",
  84         [STB6100_TEST3]         = "TEST3",
  85 };
  86 
  87 /* Template for normalisation, i.e. setting unused or undocumented
  88  * bits as required according to the documentation.
  89  */
  90 struct stb6100_regmask {
  91         u8 mask;
  92         u8 set;
  93 };
  94 
  95 static const struct stb6100_regmask stb6100_template[] = {
  96         [STB6100_LD]            = { 0xff, 0x00 },
  97         [STB6100_VCO]           = { 0xff, 0x00 },
  98         [STB6100_NI]            = { 0xff, 0x00 },
  99         [STB6100_NF_LSB]        = { 0xff, 0x00 },
 100         [STB6100_K]             = { 0xc7, 0x38 },
 101         [STB6100_G]             = { 0xef, 0x10 },
 102         [STB6100_F]             = { 0x1f, 0xc0 },
 103         [STB6100_DLB]           = { 0x38, 0xc4 },
 104         [STB6100_TEST1]         = { 0x00, 0x8f },
 105         [STB6100_FCCK]          = { 0x40, 0x0d },
 106         [STB6100_LPEN]          = { 0xf0, 0x0b },
 107         [STB6100_TEST3]         = { 0x00, 0xde },
 108 };
 109 
 110 /*
 111  * Currently unused. Some boards might need it in the future
 112  */
 113 static inline void stb6100_normalise_regs(u8 regs[])
 114 {
 115         int i;
 116 
 117         for (i = 0; i < STB6100_NUMREGS; i++)
 118                 regs[i] = (regs[i] & stb6100_template[i].mask) | stb6100_template[i].set;
 119 }
 120 
 121 static int stb6100_read_regs(struct stb6100_state *state, u8 regs[])
 122 {
 123         int rc;
 124         struct i2c_msg msg = {
 125                 .addr   = state->config->tuner_address,
 126                 .flags  = I2C_M_RD,
 127                 .buf    = regs,
 128                 .len    = STB6100_NUMREGS
 129         };
 130 
 131         rc = i2c_transfer(state->i2c, &msg, 1);
 132         if (unlikely(rc != 1)) {
 133                 dprintk(verbose, FE_ERROR, 1, "Read (0x%x) err, rc=[%d]",
 134                         state->config->tuner_address, rc);
 135 
 136                 return -EREMOTEIO;
 137         }
 138         if (unlikely(verbose > FE_DEBUG)) {
 139                 int i;
 140 
 141                 dprintk(verbose, FE_DEBUG, 1, "    Read from 0x%02x", state->config->tuner_address);
 142                 for (i = 0; i < STB6100_NUMREGS; i++)
 143                         dprintk(verbose, FE_DEBUG, 1, "        %s: 0x%02x", stb6100_regnames[i], regs[i]);
 144         }
 145         return 0;
 146 }
 147 
 148 static int stb6100_read_reg(struct stb6100_state *state, u8 reg)
 149 {
 150         u8 regs[STB6100_NUMREGS];
 151 
 152         struct i2c_msg msg = {
 153                 .addr   = state->config->tuner_address + reg,
 154                 .flags  = I2C_M_RD,
 155                 .buf    = regs,
 156                 .len    = 1
 157         };
 158 
 159         i2c_transfer(state->i2c, &msg, 1);
 160 
 161         if (unlikely(reg >= STB6100_NUMREGS)) {
 162                 dprintk(verbose, FE_ERROR, 1, "Invalid register offset 0x%x", reg);
 163                 return -EINVAL;
 164         }
 165         if (unlikely(verbose > FE_DEBUG)) {
 166                 dprintk(verbose, FE_DEBUG, 1, "    Read from 0x%02x", state->config->tuner_address);
 167                 dprintk(verbose, FE_DEBUG, 1, "        %s: 0x%02x", stb6100_regnames[reg], regs[0]);
 168         }
 169 
 170         return (unsigned int)regs[0];
 171 }
 172 
 173 static int stb6100_write_reg_range(struct stb6100_state *state, u8 buf[], int start, int len)
 174 {
 175         int rc;
 176         u8 cmdbuf[MAX_XFER_SIZE];
 177         struct i2c_msg msg = {
 178                 .addr   = state->config->tuner_address,
 179                 .flags  = 0,
 180                 .buf    = cmdbuf,
 181                 .len    = len + 1
 182         };
 183 
 184         if (1 + len > sizeof(cmdbuf)) {
 185                 printk(KERN_WARNING
 186                        "%s: i2c wr: len=%d is too big!\n",
 187                        KBUILD_MODNAME, len);
 188                 return -EINVAL;
 189         }
 190 
 191         if (unlikely(start < 1 || start + len > STB6100_NUMREGS)) {
 192                 dprintk(verbose, FE_ERROR, 1, "Invalid register range %d:%d",
 193                         start, len);
 194                 return -EINVAL;
 195         }
 196         memcpy(&cmdbuf[1], buf, len);
 197         cmdbuf[0] = start;
 198 
 199         if (unlikely(verbose > FE_DEBUG)) {
 200                 int i;
 201 
 202                 dprintk(verbose, FE_DEBUG, 1, "    Write @ 0x%02x: [%d:%d]", state->config->tuner_address, start, len);
 203                 for (i = 0; i < len; i++)
 204                         dprintk(verbose, FE_DEBUG, 1, "        %s: 0x%02x", stb6100_regnames[start + i], buf[i]);
 205         }
 206         rc = i2c_transfer(state->i2c, &msg, 1);
 207         if (unlikely(rc != 1)) {
 208                 dprintk(verbose, FE_ERROR, 1, "(0x%x) write err [%d:%d], rc=[%d]",
 209                         (unsigned int)state->config->tuner_address, start, len, rc);
 210                 return -EREMOTEIO;
 211         }
 212         return 0;
 213 }
 214 
 215 static int stb6100_write_reg(struct stb6100_state *state, u8 reg, u8 data)
 216 {
 217         u8 tmp = data; /* see gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */
 218 
 219         if (unlikely(reg >= STB6100_NUMREGS)) {
 220                 dprintk(verbose, FE_ERROR, 1, "Invalid register offset 0x%x", reg);
 221                 return -EREMOTEIO;
 222         }
 223         tmp = (tmp & stb6100_template[reg].mask) | stb6100_template[reg].set;
 224         return stb6100_write_reg_range(state, &tmp, reg, 1);
 225 }
 226 
 227 
 228 static int stb6100_get_status(struct dvb_frontend *fe, u32 *status)
 229 {
 230         int rc;
 231         struct stb6100_state *state = fe->tuner_priv;
 232 
 233         rc = stb6100_read_reg(state, STB6100_LD);
 234         if (rc < 0) {
 235                 dprintk(verbose, FE_ERROR, 1, "%s failed", __func__);
 236                 return rc;
 237         }
 238         return (rc & STB6100_LD_LOCK) ? TUNER_STATUS_LOCKED : 0;
 239 }
 240 
 241 static int stb6100_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
 242 {
 243         int rc;
 244         u8 f;
 245         u32 bw;
 246         struct stb6100_state *state = fe->tuner_priv;
 247 
 248         rc = stb6100_read_reg(state, STB6100_F);
 249         if (rc < 0)
 250                 return rc;
 251         f = rc & STB6100_F_F;
 252 
 253         bw = (f + 5) * 2000;    /* x2 for ZIF   */
 254 
 255         *bandwidth = state->bandwidth = bw * 1000;
 256         dprintk(verbose, FE_DEBUG, 1, "bandwidth = %u Hz", state->bandwidth);
 257         return 0;
 258 }
 259 
 260 static int stb6100_set_bandwidth(struct dvb_frontend *fe, u32 bandwidth)
 261 {
 262         u32 tmp;
 263         int rc;
 264         struct stb6100_state *state = fe->tuner_priv;
 265 
 266         dprintk(verbose, FE_DEBUG, 1, "set bandwidth to %u Hz", bandwidth);
 267 
 268         bandwidth /= 2; /* ZIF */
 269 
 270         if (bandwidth >= 36000000)      /* F[4:0] BW/2 max =31+5=36 mhz for F=31        */
 271                 tmp = 31;
 272         else if (bandwidth <= 5000000)  /* bw/2 min = 5Mhz for F=0                      */
 273                 tmp = 0;
 274         else                            /* if 5 < bw/2 < 36                             */
 275                 tmp = (bandwidth + 500000) / 1000000 - 5;
 276 
 277         /* Turn on LPF bandwidth setting clock control,
 278          * set bandwidth, wait 10ms, turn off.
 279          */
 280         rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d | STB6100_FCCK_FCCK);
 281         if (rc < 0)
 282                 return rc;
 283         rc = stb6100_write_reg(state, STB6100_F, 0xc0 | tmp);
 284         if (rc < 0)
 285                 return rc;
 286 
 287         msleep(5);  /*  This is dangerous as another (related) thread may start */
 288 
 289         rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d);
 290         if (rc < 0)
 291                 return rc;
 292 
 293         msleep(10);  /*  This is dangerous as another (related) thread may start */
 294 
 295         return 0;
 296 }
 297 
 298 static int stb6100_get_frequency(struct dvb_frontend *fe, u32 *frequency)
 299 {
 300         int rc;
 301         u32 nint, nfrac, fvco;
 302         int psd2, odiv;
 303         struct stb6100_state *state = fe->tuner_priv;
 304         u8 regs[STB6100_NUMREGS];
 305 
 306         rc = stb6100_read_regs(state, regs);
 307         if (rc < 0)
 308                 return rc;
 309 
 310         odiv = (regs[STB6100_VCO] & STB6100_VCO_ODIV) >> STB6100_VCO_ODIV_SHIFT;
 311         psd2 = (regs[STB6100_K] & STB6100_K_PSD2) >> STB6100_K_PSD2_SHIFT;
 312         nint = regs[STB6100_NI];
 313         nfrac = ((regs[STB6100_K] & STB6100_K_NF_MSB) << 8) | regs[STB6100_NF_LSB];
 314         fvco = (nfrac * state->reference >> (9 - psd2)) + (nint * state->reference << psd2);
 315         *frequency = state->frequency = fvco >> (odiv + 1);
 316 
 317         dprintk(verbose, FE_DEBUG, 1,
 318                 "frequency = %u kHz, odiv = %u, psd2 = %u, fxtal = %u kHz, fvco = %u kHz, N(I) = %u, N(F) = %u",
 319                 state->frequency, odiv, psd2, state->reference, fvco, nint, nfrac);
 320         return 0;
 321 }
 322 
 323 
 324 static int stb6100_set_frequency(struct dvb_frontend *fe, u32 frequency)
 325 {
 326         int rc;
 327         const struct stb6100_lkup *ptr;
 328         struct stb6100_state *state = fe->tuner_priv;
 329         struct dtv_frontend_properties *p = &fe->dtv_property_cache;
 330 
 331         u32 srate = 0, fvco, nint, nfrac;
 332         u8 regs[STB6100_NUMREGS];
 333         u8 g, psd2, odiv;
 334 
 335         dprintk(verbose, FE_DEBUG, 1, "Version 2010-8-14 13:51");
 336 
 337         if (fe->ops.get_frontend) {
 338                 dprintk(verbose, FE_DEBUG, 1, "Get frontend parameters");
 339                 fe->ops.get_frontend(fe, p);
 340         }
 341         srate = p->symbol_rate;
 342 
 343         /* Set up tuner cleanly, LPF calibration on */
 344         rc = stb6100_write_reg(state, STB6100_FCCK, 0x4d | STB6100_FCCK_FCCK);
 345         if (rc < 0)
 346                 return rc;  /* allow LPF calibration */
 347 
 348         /* PLL Loop disabled, bias on, VCO on, synth on */
 349         regs[STB6100_LPEN] = 0xeb;
 350         rc = stb6100_write_reg(state, STB6100_LPEN, regs[STB6100_LPEN]);
 351         if (rc < 0)
 352                 return rc;
 353 
 354         /* Program the registers with their data values */
 355 
 356         /* VCO divide ratio (LO divide ratio, VCO prescaler enable).    */
 357         if (frequency <= 1075000)
 358                 odiv = 1;
 359         else
 360                 odiv = 0;
 361 
 362         /* VCO enabled, search clock off as per LL3.7, 3.4.1 */
 363         regs[STB6100_VCO] = 0xe0 | (odiv << STB6100_VCO_ODIV_SHIFT);
 364 
 365         /* OSM  */
 366         for (ptr = lkup;
 367              (ptr->val_high != 0) && !CHKRANGE(frequency, ptr->val_low, ptr->val_high);
 368              ptr++);
 369 
 370         if (ptr->val_high == 0) {
 371                 printk(KERN_ERR "%s: frequency out of range: %u kHz\n", __func__, frequency);
 372                 return -EINVAL;
 373         }
 374         regs[STB6100_VCO] = (regs[STB6100_VCO] & ~STB6100_VCO_OSM) | ptr->reg;
 375         rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]);
 376         if (rc < 0)
 377                 return rc;
 378 
 379         if ((frequency > 1075000) && (frequency <= 1325000))
 380                 psd2 = 0;
 381         else
 382                 psd2 = 1;
 383         /* F(VCO) = F(LO) * (ODIV == 0 ? 2 : 4)                 */
 384         fvco = frequency << (1 + odiv);
 385         /* N(I) = floor(f(VCO) / (f(XTAL) * (PSD2 ? 2 : 1)))    */
 386         nint = fvco / (state->reference << psd2);
 387         /* N(F) = round(f(VCO) / f(XTAL) * (PSD2 ? 2 : 1) - N(I)) * 2 ^ 9       */
 388         nfrac = DIV_ROUND_CLOSEST((fvco - (nint * state->reference << psd2))
 389                                          << (9 - psd2), state->reference);
 390 
 391         /* NI */
 392         regs[STB6100_NI] = nint;
 393         rc = stb6100_write_reg(state, STB6100_NI, regs[STB6100_NI]);
 394         if (rc < 0)
 395                 return rc;
 396 
 397         /* NF */
 398         regs[STB6100_NF_LSB] = nfrac;
 399         rc = stb6100_write_reg(state, STB6100_NF_LSB, regs[STB6100_NF_LSB]);
 400         if (rc < 0)
 401                 return rc;
 402 
 403         /* K */
 404         regs[STB6100_K] = (0x38 & ~STB6100_K_PSD2) | (psd2 << STB6100_K_PSD2_SHIFT);
 405         regs[STB6100_K] = (regs[STB6100_K] & ~STB6100_K_NF_MSB) | ((nfrac >> 8) & STB6100_K_NF_MSB);
 406         rc = stb6100_write_reg(state, STB6100_K, regs[STB6100_K]);
 407         if (rc < 0)
 408                 return rc;
 409 
 410         /* G Baseband gain. */
 411         if (srate >= 15000000)
 412                 g = 9;  /*  +4 dB */
 413         else if (srate >= 5000000)
 414                 g = 11; /*  +8 dB */
 415         else
 416                 g = 14; /* +14 dB */
 417 
 418         regs[STB6100_G] = (0x10 & ~STB6100_G_G) | g;
 419         regs[STB6100_G] &= ~STB6100_G_GCT; /* mask GCT */
 420         regs[STB6100_G] |= (1 << 5); /* 2Vp-p Mode */
 421         rc = stb6100_write_reg(state, STB6100_G, regs[STB6100_G]);
 422         if (rc < 0)
 423                 return rc;
 424 
 425         /* F we don't write as it is set up in BW set */
 426 
 427         /* DLB set DC servo loop BW to 160Hz (LLA 3.8 / 2.1) */
 428         regs[STB6100_DLB] = 0xcc;
 429         rc = stb6100_write_reg(state, STB6100_DLB, regs[STB6100_DLB]);
 430         if (rc < 0)
 431                 return rc;
 432 
 433         dprintk(verbose, FE_DEBUG, 1,
 434                 "frequency = %u, srate = %u, g = %u, odiv = %u, psd2 = %u, fxtal = %u, osm = %u, fvco = %u, N(I) = %u, N(F) = %u",
 435                 frequency, srate, (unsigned int)g, (unsigned int)odiv,
 436                 (unsigned int)psd2, state->reference,
 437                 ptr->reg, fvco, nint, nfrac);
 438 
 439         /* Set up the test registers */
 440         regs[STB6100_TEST1] = 0x8f;
 441         rc = stb6100_write_reg(state, STB6100_TEST1, regs[STB6100_TEST1]);
 442         if (rc < 0)
 443                 return rc;
 444         regs[STB6100_TEST3] = 0xde;
 445         rc = stb6100_write_reg(state, STB6100_TEST3, regs[STB6100_TEST3]);
 446         if (rc < 0)
 447                 return rc;
 448 
 449         /* Bring up tuner according to LLA 3.7 3.4.1, step 2 */
 450         regs[STB6100_LPEN] = 0xfb; /* PLL Loop enabled, bias on, VCO on, synth on */
 451         rc = stb6100_write_reg(state, STB6100_LPEN, regs[STB6100_LPEN]);
 452         if (rc < 0)
 453                 return rc;
 454 
 455         msleep(2);
 456 
 457         /* Bring up tuner according to LLA 3.7 3.4.1, step 3 */
 458         regs[STB6100_VCO] &= ~STB6100_VCO_OCK;          /* VCO fast search              */
 459         rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]);
 460         if (rc < 0)
 461                 return rc;
 462 
 463         msleep(10);  /*  This is dangerous as another (related) thread may start */ /* wait for LO to lock */
 464 
 465         regs[STB6100_VCO] &= ~STB6100_VCO_OSCH;         /* vco search disabled          */
 466         regs[STB6100_VCO] |= STB6100_VCO_OCK;           /* search clock off             */
 467         rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]);
 468         if (rc < 0)
 469                 return rc;
 470 
 471         rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d);
 472         if (rc < 0)
 473                 return rc;  /* Stop LPF calibration */
 474 
 475         msleep(10);  /*  This is dangerous as another (related) thread may start */
 476                      /* wait for stabilisation, (should not be necessary)               */
 477         return 0;
 478 }
 479 
 480 static int stb6100_sleep(struct dvb_frontend *fe)
 481 {
 482         /* TODO: power down     */
 483         return 0;
 484 }
 485 
 486 static int stb6100_init(struct dvb_frontend *fe)
 487 {
 488         struct stb6100_state *state = fe->tuner_priv;
 489         int refclk = 27000000; /* Hz */
 490 
 491         /*
 492          * iqsense = 1
 493          * tunerstep = 125000
 494          */
 495         state->bandwidth        = 36000000;             /* Hz   */
 496         state->reference        = refclk / 1000;        /* kHz  */
 497 
 498         /* Set default bandwidth. Modified, PN 13-May-10        */
 499         return 0;
 500 }
 501 
 502 static int stb6100_set_params(struct dvb_frontend *fe)
 503 {
 504         struct dtv_frontend_properties *c = &fe->dtv_property_cache;
 505 
 506         if (c->frequency > 0)
 507                 stb6100_set_frequency(fe, c->frequency);
 508 
 509         if (c->bandwidth_hz > 0)
 510                 stb6100_set_bandwidth(fe, c->bandwidth_hz);
 511 
 512         return 0;
 513 }
 514 
 515 static const struct dvb_tuner_ops stb6100_ops = {
 516         .info = {
 517                 .name                   = "STB6100 Silicon Tuner",
 518                 .frequency_min_hz       =  950 * MHz,
 519                 .frequency_max_hz       = 2150 * MHz,
 520         },
 521 
 522         .init           = stb6100_init,
 523         .sleep          = stb6100_sleep,
 524         .get_status     = stb6100_get_status,
 525         .set_params     = stb6100_set_params,
 526         .get_frequency  = stb6100_get_frequency,
 527         .get_bandwidth  = stb6100_get_bandwidth,
 528         .release        = stb6100_release
 529 };
 530 
 531 struct dvb_frontend *stb6100_attach(struct dvb_frontend *fe,
 532                                     const struct stb6100_config *config,
 533                                     struct i2c_adapter *i2c)
 534 {
 535         struct stb6100_state *state = NULL;
 536 
 537         state = kzalloc(sizeof (struct stb6100_state), GFP_KERNEL);
 538         if (!state)
 539                 return NULL;
 540 
 541         state->config           = config;
 542         state->i2c              = i2c;
 543         state->frontend         = fe;
 544         state->reference        = config->refclock / 1000; /* kHz */
 545         fe->tuner_priv          = state;
 546         fe->ops.tuner_ops       = stb6100_ops;
 547 
 548         printk("%s: Attaching STB6100 \n", __func__);
 549         return fe;
 550 }
 551 
 552 static void stb6100_release(struct dvb_frontend *fe)
 553 {
 554         struct stb6100_state *state = fe->tuner_priv;
 555 
 556         fe->tuner_priv = NULL;
 557         kfree(state);
 558 }
 559 
 560 EXPORT_SYMBOL(stb6100_attach);
 561 MODULE_PARM_DESC(verbose, "Set Verbosity level");
 562 
 563 MODULE_AUTHOR("Manu Abraham");
 564 MODULE_DESCRIPTION("STB6100 Silicon tuner");
 565 MODULE_LICENSE("GPL");
/* [<][>][^][v][top][bottom][index][help] */
root/drivers/media/dvb-frontends/stb6100.c

DEFINITIONS
