root/drivers/media/rc/img-ir/img-ir-sony.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. img_ir_sony_scancode
  2. img_ir_sony_filter

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * ImgTec IR Decoder setup for Sony (SIRC) protocol.
   4  *
   5  * Copyright 2012-2014 Imagination Technologies Ltd.
   6  */
   7 
   8 #include "img-ir-hw.h"
   9 
  10 /* Convert Sony data to a scancode */
  11 static int img_ir_sony_scancode(int len, u64 raw, u64 enabled_protocols,
  12                                 struct img_ir_scancode_req *request)
  13 {
  14         unsigned int dev, subdev, func;
  15 
  16         switch (len) {
  17         case 12:
  18                 if (!(enabled_protocols & RC_PROTO_BIT_SONY12))
  19                         return -EINVAL;
  20                 func   = raw & 0x7f;    /* first 7 bits */
  21                 raw    >>= 7;
  22                 dev    = raw & 0x1f;    /* next 5 bits */
  23                 subdev = 0;
  24                 request->protocol = RC_PROTO_SONY12;
  25                 break;
  26         case 15:
  27                 if (!(enabled_protocols & RC_PROTO_BIT_SONY15))
  28                         return -EINVAL;
  29                 func   = raw & 0x7f;    /* first 7 bits */
  30                 raw    >>= 7;
  31                 dev    = raw & 0xff;    /* next 8 bits */
  32                 subdev = 0;
  33                 request->protocol = RC_PROTO_SONY15;
  34                 break;
  35         case 20:
  36                 if (!(enabled_protocols & RC_PROTO_BIT_SONY20))
  37                         return -EINVAL;
  38                 func   = raw & 0x7f;    /* first 7 bits */
  39                 raw    >>= 7;
  40                 dev    = raw & 0x1f;    /* next 5 bits */
  41                 raw    >>= 5;
  42                 subdev = raw & 0xff;    /* next 8 bits */
  43                 request->protocol = RC_PROTO_SONY20;
  44                 break;
  45         default:
  46                 return -EINVAL;
  47         }
  48         request->scancode = dev << 16 | subdev << 8 | func;
  49         return IMG_IR_SCANCODE;
  50 }
  51 
  52 /* Convert NEC scancode to NEC data filter */
  53 static int img_ir_sony_filter(const struct rc_scancode_filter *in,
  54                               struct img_ir_filter *out, u64 protocols)
  55 {
  56         unsigned int dev, subdev, func;
  57         unsigned int dev_m, subdev_m, func_m;
  58         unsigned int len = 0;
  59 
  60         dev      = (in->data >> 16) & 0xff;
  61         dev_m    = (in->mask >> 16) & 0xff;
  62         subdev   = (in->data >> 8)  & 0xff;
  63         subdev_m = (in->mask >> 8)  & 0xff;
  64         func     = (in->data >> 0)  & 0x7f;
  65         func_m   = (in->mask >> 0)  & 0x7f;
  66 
  67         protocols &= RC_PROTO_BIT_SONY12 | RC_PROTO_BIT_SONY15 |
  68                                                         RC_PROTO_BIT_SONY20;
  69 
  70         /*
  71          * If only one bit is set, we were requested to do an exact
  72          * protocol. This should be the case for wakeup filters; for
  73          * normal filters, guess the protocol from the scancode.
  74          */
  75         if (!is_power_of_2(protocols)) {
  76                 if (subdev & subdev_m)
  77                         protocols = RC_PROTO_BIT_SONY20;
  78                 else if (dev & dev_m & 0xe0)
  79                         protocols = RC_PROTO_BIT_SONY15;
  80                 else
  81                         protocols = RC_PROTO_BIT_SONY12;
  82         }
  83 
  84         if (protocols == RC_PROTO_BIT_SONY20) {
  85                 /* can't encode subdev and higher device bits */
  86                 if (dev & dev_m & 0xe0)
  87                         return -EINVAL;
  88                 len = 20;
  89                 dev_m &= 0x1f;
  90         } else if (protocols == RC_PROTO_BIT_SONY15) {
  91                 len = 15;
  92                 subdev_m = 0;
  93         } else {
  94                 /*
  95                  * The hardware mask cannot distinguish high device bits and low
  96                  * extended bits, so logically AND those bits of the masks
  97                  * together.
  98                  */
  99                 subdev_m &= (dev_m >> 5) | 0xf8;
 100                 dev_m &= 0x1f;
 101         }
 102 
 103         /* ensure there aren't any bits straying between fields */
 104         dev &= dev_m;
 105         subdev &= subdev_m;
 106 
 107         /* write the hardware filter */
 108         out->data = func          |
 109                     dev      << 7 |
 110                     subdev   << 15;
 111         out->mask = func_m        |
 112                     dev_m    << 7 |
 113                     subdev_m << 15;
 114 
 115         if (len) {
 116                 out->minlen = len;
 117                 out->maxlen = len;
 118         }
 119         return 0;
 120 }
 121 
 122 /*
 123  * Sony SIRC decoder
 124  * See also http://www.sbprojects.com/knowledge/ir/sirc.php
 125  *          http://picprojects.org.uk/projects/sirc/sonysirc.pdf
 126  */
 127 struct img_ir_decoder img_ir_sony = {
 128         .type = RC_PROTO_BIT_SONY12 | RC_PROTO_BIT_SONY15 | RC_PROTO_BIT_SONY20,
 129         .control = {
 130                 .decoden = 1,
 131                 .code_type = IMG_IR_CODETYPE_PULSELEN,
 132         },
 133         /* main timings */
 134         .unit = 600000, /* 600 us */
 135         .timings = {
 136                 /* leader symbol */
 137                 .ldr = {
 138                         .pulse = { 4    /* 2.4 ms */ },
 139                         .space = { 1    /* 600 us */ },
 140                 },
 141                 /* 0 symbol */
 142                 .s00 = {
 143                         .pulse = { 1    /* 600 us */ },
 144                         .space = { 1    /* 600 us */ },
 145                 },
 146                 /* 1 symbol */
 147                 .s01 = {
 148                         .pulse = { 2    /* 1.2 ms */ },
 149                         .space = { 1    /* 600 us */ },
 150                 },
 151                 /* free time */
 152                 .ft = {
 153                         .minlen = 12,
 154                         .maxlen = 20,
 155                         .ft_min = 10,   /* 6 ms */
 156                 },
 157         },
 158         /* scancode logic */
 159         .scancode = img_ir_sony_scancode,
 160         .filter = img_ir_sony_filter,
 161 };

/* [<][>][^][v][top][bottom][index][help] */