root/drivers/media/usb/dvb-usb/m920x.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. m920x_read
  2. m920x_write
  3. m920x_write_seq
  4. m920x_init
  5. m920x_init_ep
  6. m920x_parse_rc_state
  7. m920x_rc_query
  8. m920x_rc_core_query
  9. m920x_i2c_xfer
  10. m920x_i2c_func
  11. m920x_set_filter
  12. m920x_update_filters
  13. m920x_pid_filter_ctrl
  14. m920x_pid_filter
  15. m920x_firmware_download
  16. m920x_identify_state
  17. m920x_mt352_demod_init
  18. m920x_mt352_frontend_attach
  19. m920x_mt352_frontend_attach_vp7049
  20. m920x_tda10046_08_frontend_attach
  21. m920x_tda10046_0b_frontend_attach
  22. m920x_qt1010_tuner_attach
  23. m920x_tda8275_60_tuner_attach
  24. m920x_tda8275_61_tuner_attach
  25. m920x_fmd1216me_tuner_attach
  26. m920x_mt2060_tuner_attach
  27. m920x_probe

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /* DVB USB compliant linux driver for MSI Mega Sky 580 DVB-T USB2.0 receiver
   3  *
   4  * Copyright (C) 2006 Aapo Tahkola (aet@rasterburn.org)
   5  *
   6  * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
   7  */
   8 
   9 #include "m920x.h"
  10 
  11 #include "mt352.h"
  12 #include "mt352_priv.h"
  13 #include "qt1010.h"
  14 #include "tda1004x.h"
  15 #include "tda827x.h"
  16 #include "mt2060.h"
  17 
  18 #include <media/tuner.h>
  19 #include "tuner-simple.h"
  20 #include <asm/unaligned.h>
  21 
  22 /* debug */
  23 static int dvb_usb_m920x_debug;
  24 module_param_named(debug,dvb_usb_m920x_debug, int, 0644);
  25 MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS);
  26 
  27 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
  28 
  29 static int m920x_set_filter(struct dvb_usb_device *d, int type, int idx, int pid);
  30 
  31 static inline int m920x_read(struct usb_device *udev, u8 request, u16 value,
  32                              u16 index, void *data, int size)
  33 {
  34         int ret;
  35 
  36         ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
  37                               request, USB_TYPE_VENDOR | USB_DIR_IN,
  38                               value, index, data, size, 2000);
  39         if (ret < 0) {
  40                 printk(KERN_INFO "m920x_read = error: %d\n", ret);
  41                 return ret;
  42         }
  43 
  44         if (ret != size) {
  45                 deb("m920x_read = no data\n");
  46                 return -EIO;
  47         }
  48 
  49         return 0;
  50 }
  51 
  52 static inline int m920x_write(struct usb_device *udev, u8 request,
  53                               u16 value, u16 index)
  54 {
  55         return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), request,
  56                                USB_TYPE_VENDOR | USB_DIR_OUT, value, index,
  57                                NULL, 0, 2000);
  58 }
  59 
  60 static inline int m920x_write_seq(struct usb_device *udev, u8 request,
  61                                   struct m920x_inits *seq)
  62 {
  63         int ret;
  64         do {
  65                 ret = m920x_write(udev, request, seq->data, seq->address);
  66                 if (ret != 0)
  67                         return ret;
  68 
  69                 seq++;
  70         } while (seq->address);
  71 
  72         return 0;
  73 }
  74 
  75 static int m920x_init(struct dvb_usb_device *d, struct m920x_inits *rc_seq)
  76 {
  77         int ret, i, epi, flags = 0;
  78         int adap_enabled[M9206_MAX_ADAPTERS] = { 0 };
  79 
  80         /* Remote controller init. */
  81         if (d->props.rc.legacy.rc_query || d->props.rc.core.rc_query) {
  82                 deb("Initialising remote control\n");
  83                 ret = m920x_write_seq(d->udev, M9206_CORE, rc_seq);
  84                 if (ret != 0) {
  85                         deb("Initialising remote control failed\n");
  86                         return ret;
  87                 }
  88 
  89                 deb("Initialising remote control success\n");
  90         }
  91 
  92         for (i = 0; i < d->props.num_adapters; i++)
  93                 flags |= d->adapter[i].props.fe[0].caps;
  94 
  95         /* Some devices(Dposh) might crash if we attempt touch at all. */
  96         if (flags & DVB_USB_ADAP_HAS_PID_FILTER) {
  97                 for (i = 0; i < d->props.num_adapters; i++) {
  98                         epi = d->adapter[i].props.fe[0].stream.endpoint - 0x81;
  99 
 100                         if (epi < 0 || epi >= M9206_MAX_ADAPTERS) {
 101                                 printk(KERN_INFO "m920x: Unexpected adapter endpoint!\n");
 102                                 return -EINVAL;
 103                         }
 104 
 105                         adap_enabled[epi] = 1;
 106                 }
 107 
 108                 for (i = 0; i < M9206_MAX_ADAPTERS; i++) {
 109                         if (adap_enabled[i])
 110                                 continue;
 111 
 112                         if ((ret = m920x_set_filter(d, 0x81 + i, 0, 0x0)) != 0)
 113                                 return ret;
 114 
 115                         if ((ret = m920x_set_filter(d, 0x81 + i, 0, 0x02f5)) != 0)
 116                                 return ret;
 117                 }
 118         }
 119 
 120         return 0;
 121 }
 122 
 123 static int m920x_init_ep(struct usb_interface *intf)
 124 {
 125         struct usb_device *udev = interface_to_usbdev(intf);
 126         struct usb_host_interface *alt;
 127 
 128         if ((alt = usb_altnum_to_altsetting(intf, 1)) == NULL) {
 129                 deb("No alt found!\n");
 130                 return -ENODEV;
 131         }
 132 
 133         return usb_set_interface(udev, alt->desc.bInterfaceNumber,
 134                                  alt->desc.bAlternateSetting);
 135 }
 136 
 137 static inline void m920x_parse_rc_state(struct dvb_usb_device *d, u8 rc_state,
 138                                         int *state)
 139 {
 140         struct m920x_state *m = d->priv;
 141 
 142         switch (rc_state) {
 143         case 0x80:
 144                 *state = REMOTE_NO_KEY_PRESSED;
 145                 break;
 146 
 147         case 0x88: /* framing error or "invalid code" */
 148         case 0x99:
 149         case 0xc0:
 150         case 0xd8:
 151                 *state = REMOTE_NO_KEY_PRESSED;
 152                 m->rep_count = 0;
 153                 break;
 154 
 155         case 0x93:
 156         case 0x92:
 157         case 0x83: /* pinnacle PCTV310e */
 158         case 0x82:
 159                 m->rep_count = 0;
 160                 *state = REMOTE_KEY_PRESSED;
 161                 break;
 162 
 163         case 0x91:
 164         case 0x81: /* pinnacle PCTV310e */
 165                 /* prevent immediate auto-repeat */
 166                 if (++m->rep_count > 2)
 167                         *state = REMOTE_KEY_REPEAT;
 168                 else
 169                         *state = REMOTE_NO_KEY_PRESSED;
 170                 break;
 171 
 172         default:
 173                 deb("Unexpected rc state %02x\n", rc_state);
 174                 *state = REMOTE_NO_KEY_PRESSED;
 175                 break;
 176         }
 177 }
 178 
 179 static int m920x_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 180 {
 181         int i, ret = 0;
 182         u8 *rc_state;
 183 
 184         rc_state = kmalloc(2, GFP_KERNEL);
 185         if (!rc_state)
 186                 return -ENOMEM;
 187 
 188         ret = m920x_read(d->udev, M9206_CORE, 0x0, M9206_RC_STATE,
 189                          rc_state, 1);
 190         if (ret != 0)
 191                 goto out;
 192 
 193         ret = m920x_read(d->udev, M9206_CORE, 0x0, M9206_RC_KEY,
 194                          rc_state + 1, 1);
 195         if (ret != 0)
 196                 goto out;
 197 
 198         m920x_parse_rc_state(d, rc_state[0], state);
 199 
 200         for (i = 0; i < d->props.rc.legacy.rc_map_size; i++)
 201                 if (rc5_data(&d->props.rc.legacy.rc_map_table[i]) == rc_state[1]) {
 202                         *event = d->props.rc.legacy.rc_map_table[i].keycode;
 203                         goto out;
 204                 }
 205 
 206         if (rc_state[1] != 0)
 207                 deb("Unknown rc key %02x\n", rc_state[1]);
 208 
 209         *state = REMOTE_NO_KEY_PRESSED;
 210 
 211  out:
 212         kfree(rc_state);
 213         return ret;
 214 }
 215 
 216 static int m920x_rc_core_query(struct dvb_usb_device *d)
 217 {
 218         int ret = 0;
 219         u8 *rc_state;
 220         int state;
 221 
 222         rc_state = kmalloc(2, GFP_KERNEL);
 223         if (!rc_state)
 224                 return -ENOMEM;
 225 
 226         if ((ret = m920x_read(d->udev, M9206_CORE, 0x0, M9206_RC_STATE, &rc_state[0], 1)) != 0)
 227                 goto out;
 228 
 229         if ((ret = m920x_read(d->udev, M9206_CORE, 0x0, M9206_RC_KEY, &rc_state[1], 1)) != 0)
 230                 goto out;
 231 
 232         deb("state=0x%02x keycode=0x%02x\n", rc_state[0], rc_state[1]);
 233 
 234         m920x_parse_rc_state(d, rc_state[0], &state);
 235 
 236         if (state == REMOTE_NO_KEY_PRESSED)
 237                 rc_keyup(d->rc_dev);
 238         else if (state == REMOTE_KEY_REPEAT)
 239                 rc_repeat(d->rc_dev);
 240         else
 241                 rc_keydown(d->rc_dev, RC_PROTO_UNKNOWN, rc_state[1], 0);
 242 
 243 out:
 244         kfree(rc_state);
 245         return ret;
 246 }
 247 
 248 /* I2C */
 249 static int m920x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num)
 250 {
 251         struct dvb_usb_device *d = i2c_get_adapdata(adap);
 252         int i, j;
 253         int ret = 0;
 254 
 255         if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
 256                 return -EAGAIN;
 257 
 258         for (i = 0; i < num; i++) {
 259                 if (msg[i].flags & (I2C_M_NO_RD_ACK | I2C_M_IGNORE_NAK | I2C_M_TEN) || msg[i].len == 0) {
 260                         /* For a 0 byte message, I think sending the address
 261                          * to index 0x80|0x40 would be the correct thing to
 262                          * do.  However, zero byte messages are only used for
 263                          * probing, and since we don't know how to get the
 264                          * slave's ack, we can't probe. */
 265                         ret = -ENOTSUPP;
 266                         goto unlock;
 267                 }
 268                 /* Send START & address/RW bit */
 269                 if (!(msg[i].flags & I2C_M_NOSTART)) {
 270                         if ((ret = m920x_write(d->udev, M9206_I2C,
 271                                         (msg[i].addr << 1) |
 272                                         (msg[i].flags & I2C_M_RD ? 0x01 : 0), 0x80)) != 0)
 273                                 goto unlock;
 274                         /* Should check for ack here, if we knew how. */
 275                 }
 276                 if (msg[i].flags & I2C_M_RD) {
 277                         for (j = 0; j < msg[i].len; j++) {
 278                                 /* Last byte of transaction?
 279                                  * Send STOP, otherwise send ACK. */
 280                                 int stop = (i+1 == num && j+1 == msg[i].len) ? 0x40 : 0x01;
 281 
 282                                 if ((ret = m920x_read(d->udev, M9206_I2C, 0x0,
 283                                                       0x20 | stop,
 284                                                       &msg[i].buf[j], 1)) != 0)
 285                                         goto unlock;
 286                         }
 287                 } else {
 288                         for (j = 0; j < msg[i].len; j++) {
 289                                 /* Last byte of transaction? Then send STOP. */
 290                                 int stop = (i+1 == num && j+1 == msg[i].len) ? 0x40 : 0x00;
 291 
 292                                 if ((ret = m920x_write(d->udev, M9206_I2C, msg[i].buf[j], stop)) != 0)
 293                                         goto unlock;
 294                                 /* Should check for ack here too. */
 295                         }
 296                 }
 297         }
 298         ret = num;
 299 
 300  unlock:
 301         mutex_unlock(&d->i2c_mutex);
 302 
 303         return ret;
 304 }
 305 
 306 static u32 m920x_i2c_func(struct i2c_adapter *adapter)
 307 {
 308         return I2C_FUNC_I2C;
 309 }
 310 
 311 static struct i2c_algorithm m920x_i2c_algo = {
 312         .master_xfer   = m920x_i2c_xfer,
 313         .functionality = m920x_i2c_func,
 314 };
 315 
 316 /* pid filter */
 317 static int m920x_set_filter(struct dvb_usb_device *d, int type, int idx, int pid)
 318 {
 319         int ret = 0;
 320 
 321         if (pid >= 0x8000)
 322                 return -EINVAL;
 323 
 324         pid |= 0x8000;
 325 
 326         if ((ret = m920x_write(d->udev, M9206_FILTER, pid, (type << 8) | (idx * 4) )) != 0)
 327                 return ret;
 328 
 329         if ((ret = m920x_write(d->udev, M9206_FILTER, 0, (type << 8) | (idx * 4) )) != 0)
 330                 return ret;
 331 
 332         return ret;
 333 }
 334 
 335 static int m920x_update_filters(struct dvb_usb_adapter *adap)
 336 {
 337         struct m920x_state *m = adap->dev->priv;
 338         int enabled = m->filtering_enabled[adap->id];
 339         int i, ret = 0, filter = 0;
 340         int ep = adap->props.fe[0].stream.endpoint;
 341 
 342         for (i = 0; i < M9206_MAX_FILTERS; i++)
 343                 if (m->filters[adap->id][i] == 8192)
 344                         enabled = 0;
 345 
 346         /* Disable all filters */
 347         if ((ret = m920x_set_filter(adap->dev, ep, 1, enabled)) != 0)
 348                 return ret;
 349 
 350         for (i = 0; i < M9206_MAX_FILTERS; i++)
 351                 if ((ret = m920x_set_filter(adap->dev, ep, i + 2, 0)) != 0)
 352                         return ret;
 353 
 354         /* Set */
 355         if (enabled) {
 356                 for (i = 0; i < M9206_MAX_FILTERS; i++) {
 357                         if (m->filters[adap->id][i] == 0)
 358                                 continue;
 359 
 360                         if ((ret = m920x_set_filter(adap->dev, ep, filter + 2, m->filters[adap->id][i])) != 0)
 361                                 return ret;
 362 
 363                         filter++;
 364                 }
 365         }
 366 
 367         return ret;
 368 }
 369 
 370 static int m920x_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
 371 {
 372         struct m920x_state *m = adap->dev->priv;
 373 
 374         m->filtering_enabled[adap->id] = onoff ? 1 : 0;
 375 
 376         return m920x_update_filters(adap);
 377 }
 378 
 379 static int m920x_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff)
 380 {
 381         struct m920x_state *m = adap->dev->priv;
 382 
 383         m->filters[adap->id][index] = onoff ? pid : 0;
 384 
 385         return m920x_update_filters(adap);
 386 }
 387 
 388 static int m920x_firmware_download(struct usb_device *udev, const struct firmware *fw)
 389 {
 390         u16 value, index, size;
 391         u8 *read, *buff;
 392         int i, pass, ret = 0;
 393 
 394         buff = kmalloc(65536, GFP_KERNEL);
 395         if (buff == NULL)
 396                 return -ENOMEM;
 397 
 398         read = kmalloc(4, GFP_KERNEL);
 399         if (!read) {
 400                 kfree(buff);
 401                 return -ENOMEM;
 402         }
 403 
 404         if ((ret = m920x_read(udev, M9206_FILTER, 0x0, 0x8000, read, 4)) != 0)
 405                 goto done;
 406         deb("%*ph\n", 4, read);
 407 
 408         if ((ret = m920x_read(udev, M9206_FW, 0x0, 0x0, read, 1)) != 0)
 409                 goto done;
 410         deb("%x\n", read[0]);
 411 
 412         for (pass = 0; pass < 2; pass++) {
 413                 for (i = 0; i + (sizeof(u16) * 3) < fw->size;) {
 414                         value = get_unaligned_le16(fw->data + i);
 415                         i += sizeof(u16);
 416 
 417                         index = get_unaligned_le16(fw->data + i);
 418                         i += sizeof(u16);
 419 
 420                         size = get_unaligned_le16(fw->data + i);
 421                         i += sizeof(u16);
 422 
 423                         if (pass == 1) {
 424                                 /* Will stall if using fw->data ... */
 425                                 memcpy(buff, fw->data + i, size);
 426 
 427                                 ret = usb_control_msg(udev, usb_sndctrlpipe(udev,0),
 428                                                       M9206_FW,
 429                                                       USB_TYPE_VENDOR | USB_DIR_OUT,
 430                                                       value, index, buff, size, 20);
 431                                 if (ret != size) {
 432                                         deb("error while uploading fw!\n");
 433                                         ret = -EIO;
 434                                         goto done;
 435                                 }
 436                                 msleep(3);
 437                         }
 438                         i += size;
 439                 }
 440                 if (i != fw->size) {
 441                         deb("bad firmware file!\n");
 442                         ret = -EINVAL;
 443                         goto done;
 444                 }
 445         }
 446 
 447         msleep(36);
 448 
 449         /* m920x will disconnect itself from the bus after this. */
 450         (void) m920x_write(udev, M9206_CORE, 0x01, M9206_FW_GO);
 451         deb("firmware uploaded!\n");
 452 
 453  done:
 454         kfree(read);
 455         kfree(buff);
 456 
 457         return ret;
 458 }
 459 
 460 /* Callbacks for DVB USB */
 461 static int m920x_identify_state(struct usb_device *udev,
 462                                 struct dvb_usb_device_properties *props,
 463                                 struct dvb_usb_device_description **desc,
 464                                 int *cold)
 465 {
 466         struct usb_host_interface *alt;
 467 
 468         alt = usb_altnum_to_altsetting(usb_ifnum_to_if(udev, 0), 1);
 469         *cold = (alt == NULL) ? 1 : 0;
 470 
 471         return 0;
 472 }
 473 
 474 /* demod configurations */
 475 static int m920x_mt352_demod_init(struct dvb_frontend *fe)
 476 {
 477         int ret;
 478         u8 config[] = { CONFIG, 0x3d };
 479         u8 clock[] = { CLOCK_CTL, 0x30 };
 480         u8 reset[] = { RESET, 0x80 };
 481         u8 adc_ctl[] = { ADC_CTL_1, 0x40 };
 482         u8 agc[] = { AGC_TARGET, 0x1c, 0x20 };
 483         u8 sec_agc[] = { 0x69, 0x00, 0xff, 0xff, 0x40, 0xff, 0x00, 0x40, 0x40 };
 484         u8 unk1[] = { 0x93, 0x1a };
 485         u8 unk2[] = { 0xb5, 0x7a };
 486 
 487         deb("Demod init!\n");
 488 
 489         if ((ret = mt352_write(fe, config, ARRAY_SIZE(config))) != 0)
 490                 return ret;
 491         if ((ret = mt352_write(fe, clock, ARRAY_SIZE(clock))) != 0)
 492                 return ret;
 493         if ((ret = mt352_write(fe, reset, ARRAY_SIZE(reset))) != 0)
 494                 return ret;
 495         if ((ret = mt352_write(fe, adc_ctl, ARRAY_SIZE(adc_ctl))) != 0)
 496                 return ret;
 497         if ((ret = mt352_write(fe, agc, ARRAY_SIZE(agc))) != 0)
 498                 return ret;
 499         if ((ret = mt352_write(fe, sec_agc, ARRAY_SIZE(sec_agc))) != 0)
 500                 return ret;
 501         if ((ret = mt352_write(fe, unk1, ARRAY_SIZE(unk1))) != 0)
 502                 return ret;
 503         if ((ret = mt352_write(fe, unk2, ARRAY_SIZE(unk2))) != 0)
 504                 return ret;
 505 
 506         return 0;
 507 }
 508 
 509 static struct mt352_config m920x_mt352_config = {
 510         .demod_address = 0x0f,
 511         .no_tuner = 1,
 512         .demod_init = m920x_mt352_demod_init,
 513 };
 514 
 515 static struct tda1004x_config m920x_tda10046_08_config = {
 516         .demod_address = 0x08,
 517         .invert = 0,
 518         .invert_oclk = 0,
 519         .ts_mode = TDA10046_TS_SERIAL,
 520         .xtal_freq = TDA10046_XTAL_16M,
 521         .if_freq = TDA10046_FREQ_045,
 522         .agc_config = TDA10046_AGC_TDA827X,
 523         .gpio_config = TDA10046_GPTRI,
 524         .request_firmware = NULL,
 525 };
 526 
 527 static struct tda1004x_config m920x_tda10046_0b_config = {
 528         .demod_address = 0x0b,
 529         .invert = 0,
 530         .invert_oclk = 0,
 531         .ts_mode = TDA10046_TS_SERIAL,
 532         .xtal_freq = TDA10046_XTAL_16M,
 533         .if_freq = TDA10046_FREQ_045,
 534         .agc_config = TDA10046_AGC_TDA827X,
 535         .gpio_config = TDA10046_GPTRI,
 536         .request_firmware = NULL, /* uses firmware EEPROM */
 537 };
 538 
 539 /* tuner configurations */
 540 static struct qt1010_config m920x_qt1010_config = {
 541         .i2c_address = 0x62
 542 };
 543 
 544 static struct mt2060_config m920x_mt2060_config = {
 545         .i2c_address = 0x60, /* 0xc0 */
 546         .clock_out = 0,
 547 };
 548 
 549 
 550 /* Callbacks for DVB USB */
 551 static int m920x_mt352_frontend_attach(struct dvb_usb_adapter *adap)
 552 {
 553         deb("%s\n",__func__);
 554 
 555         adap->fe_adap[0].fe = dvb_attach(mt352_attach,
 556                                          &m920x_mt352_config,
 557                                          &adap->dev->i2c_adap);
 558         if ((adap->fe_adap[0].fe) == NULL)
 559                 return -EIO;
 560 
 561         return 0;
 562 }
 563 
 564 static int m920x_mt352_frontend_attach_vp7049(struct dvb_usb_adapter *adap)
 565 {
 566         struct m920x_inits vp7049_fe_init_seq[] = {
 567                 /* XXX without these commands the frontend cannot be detected,
 568                  * they must be sent BEFORE the frontend is attached */
 569                 { 0xff28,         0x00 },
 570                 { 0xff23,         0x00 },
 571                 { 0xff28,         0x00 },
 572                 { 0xff23,         0x00 },
 573                 { 0xff21,         0x20 },
 574                 { 0xff21,         0x60 },
 575                 { 0xff28,         0x00 },
 576                 { 0xff22,         0x00 },
 577                 { 0xff20,         0x30 },
 578                 { 0xff20,         0x20 },
 579                 { 0xff20,         0x30 },
 580                 { } /* terminating entry */
 581         };
 582         int ret;
 583 
 584         deb("%s\n", __func__);
 585 
 586         ret = m920x_write_seq(adap->dev->udev, M9206_CORE, vp7049_fe_init_seq);
 587         if (ret != 0) {
 588                 deb("Initialization of vp7049 frontend failed.");
 589                 return ret;
 590         }
 591 
 592         return m920x_mt352_frontend_attach(adap);
 593 }
 594 
 595 static int m920x_tda10046_08_frontend_attach(struct dvb_usb_adapter *adap)
 596 {
 597         deb("%s\n",__func__);
 598 
 599         adap->fe_adap[0].fe = dvb_attach(tda10046_attach,
 600                                          &m920x_tda10046_08_config,
 601                                          &adap->dev->i2c_adap);
 602         if ((adap->fe_adap[0].fe) == NULL)
 603                 return -EIO;
 604 
 605         return 0;
 606 }
 607 
 608 static int m920x_tda10046_0b_frontend_attach(struct dvb_usb_adapter *adap)
 609 {
 610         deb("%s\n",__func__);
 611 
 612         adap->fe_adap[0].fe = dvb_attach(tda10046_attach,
 613                                          &m920x_tda10046_0b_config,
 614                                          &adap->dev->i2c_adap);
 615         if ((adap->fe_adap[0].fe) == NULL)
 616                 return -EIO;
 617 
 618         return 0;
 619 }
 620 
 621 static int m920x_qt1010_tuner_attach(struct dvb_usb_adapter *adap)
 622 {
 623         deb("%s\n",__func__);
 624 
 625         if (dvb_attach(qt1010_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap, &m920x_qt1010_config) == NULL)
 626                 return -ENODEV;
 627 
 628         return 0;
 629 }
 630 
 631 static int m920x_tda8275_60_tuner_attach(struct dvb_usb_adapter *adap)
 632 {
 633         deb("%s\n",__func__);
 634 
 635         if (dvb_attach(tda827x_attach, adap->fe_adap[0].fe, 0x60, &adap->dev->i2c_adap, NULL) == NULL)
 636                 return -ENODEV;
 637 
 638         return 0;
 639 }
 640 
 641 static int m920x_tda8275_61_tuner_attach(struct dvb_usb_adapter *adap)
 642 {
 643         deb("%s\n",__func__);
 644 
 645         if (dvb_attach(tda827x_attach, adap->fe_adap[0].fe, 0x61, &adap->dev->i2c_adap, NULL) == NULL)
 646                 return -ENODEV;
 647 
 648         return 0;
 649 }
 650 
 651 static int m920x_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap)
 652 {
 653         dvb_attach(simple_tuner_attach, adap->fe_adap[0].fe,
 654                    &adap->dev->i2c_adap, 0x61,
 655                    TUNER_PHILIPS_FMD1216ME_MK3);
 656         return 0;
 657 }
 658 
 659 static int m920x_mt2060_tuner_attach(struct dvb_usb_adapter *adap)
 660 {
 661         deb("%s\n", __func__);
 662 
 663         if (dvb_attach(mt2060_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap,
 664                        &m920x_mt2060_config, 1220) == NULL)
 665                 return -ENODEV;
 666 
 667         return 0;
 668 }
 669 
 670 
 671 /* device-specific initialization */
 672 static struct m920x_inits megasky_rc_init [] = {
 673         { M9206_RC_INIT2, 0xa8 },
 674         { M9206_RC_INIT1, 0x51 },
 675         { } /* terminating entry */
 676 };
 677 
 678 static struct m920x_inits tvwalkertwin_rc_init [] = {
 679         { M9206_RC_INIT2, 0x00 },
 680         { M9206_RC_INIT1, 0xef },
 681         { 0xff28,         0x00 },
 682         { 0xff23,         0x00 },
 683         { 0xff21,         0x30 },
 684         { } /* terminating entry */
 685 };
 686 
 687 static struct m920x_inits pinnacle310e_init[] = {
 688         /* without these the tuner doesn't work */
 689         { 0xff20,         0x9b },
 690         { 0xff22,         0x70 },
 691 
 692         /* rc settings */
 693         { 0xff50,         0x80 },
 694         { M9206_RC_INIT1, 0x00 },
 695         { M9206_RC_INIT2, 0xff },
 696         { } /* terminating entry */
 697 };
 698 
 699 static struct m920x_inits vp7049_rc_init[] = {
 700         { 0xff28,         0x00 },
 701         { 0xff23,         0x00 },
 702         { 0xff21,         0x70 },
 703         { M9206_RC_INIT2, 0x00 },
 704         { M9206_RC_INIT1, 0xff },
 705         { } /* terminating entry */
 706 };
 707 
 708 /* ir keymaps */
 709 static struct rc_map_table rc_map_megasky_table[] = {
 710         { 0x0012, KEY_POWER },
 711         { 0x001e, KEY_CYCLEWINDOWS }, /* min/max */
 712         { 0x0002, KEY_CHANNELUP },
 713         { 0x0005, KEY_CHANNELDOWN },
 714         { 0x0003, KEY_VOLUMEUP },
 715         { 0x0006, KEY_VOLUMEDOWN },
 716         { 0x0004, KEY_MUTE },
 717         { 0x0007, KEY_OK }, /* TS */
 718         { 0x0008, KEY_STOP },
 719         { 0x0009, KEY_MENU }, /* swap */
 720         { 0x000a, KEY_REWIND },
 721         { 0x001b, KEY_PAUSE },
 722         { 0x001f, KEY_FASTFORWARD },
 723         { 0x000c, KEY_RECORD },
 724         { 0x000d, KEY_CAMERA }, /* screenshot */
 725         { 0x000e, KEY_COFFEE }, /* "MTS" */
 726 };
 727 
 728 static struct rc_map_table rc_map_tvwalkertwin_table[] = {
 729         { 0x0001, KEY_ZOOM }, /* Full Screen */
 730         { 0x0002, KEY_CAMERA }, /* snapshot */
 731         { 0x0003, KEY_MUTE },
 732         { 0x0004, KEY_REWIND },
 733         { 0x0005, KEY_PLAYPAUSE }, /* Play/Pause */
 734         { 0x0006, KEY_FASTFORWARD },
 735         { 0x0007, KEY_RECORD },
 736         { 0x0008, KEY_STOP },
 737         { 0x0009, KEY_TIME }, /* Timeshift */
 738         { 0x000c, KEY_COFFEE }, /* Recall */
 739         { 0x000e, KEY_CHANNELUP },
 740         { 0x0012, KEY_POWER },
 741         { 0x0015, KEY_MENU }, /* source */
 742         { 0x0018, KEY_CYCLEWINDOWS }, /* TWIN PIP */
 743         { 0x001a, KEY_CHANNELDOWN },
 744         { 0x001b, KEY_VOLUMEDOWN },
 745         { 0x001e, KEY_VOLUMEUP },
 746 };
 747 
 748 static struct rc_map_table rc_map_pinnacle310e_table[] = {
 749         { 0x16, KEY_POWER },
 750         { 0x17, KEY_FAVORITES },
 751         { 0x0f, KEY_TEXT },
 752         { 0x48, KEY_PROGRAM },          /* preview */
 753         { 0x1c, KEY_EPG },
 754         { 0x04, KEY_LIST },             /* record list */
 755         { 0x03, KEY_1 },
 756         { 0x01, KEY_2 },
 757         { 0x06, KEY_3 },
 758         { 0x09, KEY_4 },
 759         { 0x1d, KEY_5 },
 760         { 0x1f, KEY_6 },
 761         { 0x0d, KEY_7 },
 762         { 0x19, KEY_8 },
 763         { 0x1b, KEY_9 },
 764         { 0x15, KEY_0 },
 765         { 0x0c, KEY_CANCEL },
 766         { 0x4a, KEY_CLEAR },
 767         { 0x13, KEY_BACK },
 768         { 0x00, KEY_TAB },
 769         { 0x4b, KEY_UP },
 770         { 0x4e, KEY_LEFT },
 771         { 0x52, KEY_RIGHT },
 772         { 0x51, KEY_DOWN },
 773         { 0x4f, KEY_ENTER },            /* could also be KEY_OK */
 774         { 0x1e, KEY_VOLUMEUP },
 775         { 0x0a, KEY_VOLUMEDOWN },
 776         { 0x05, KEY_CHANNELUP },
 777         { 0x02, KEY_CHANNELDOWN },
 778         { 0x11, KEY_RECORD },
 779         { 0x14, KEY_PLAY },
 780         { 0x4c, KEY_PAUSE },
 781         { 0x1a, KEY_STOP },
 782         { 0x40, KEY_REWIND },
 783         { 0x12, KEY_FASTFORWARD },
 784         { 0x41, KEY_PREVIOUSSONG },     /* Replay */
 785         { 0x42, KEY_NEXTSONG },         /* Skip */
 786         { 0x54, KEY_CAMERA },           /* Capture */
 787 /*      { 0x50, KEY_SAP },      */              /* Sap */
 788         { 0x47, KEY_CYCLEWINDOWS },     /* Pip */
 789         { 0x4d, KEY_SCREEN },           /* FullScreen */
 790         { 0x08, KEY_SUBTITLE },
 791         { 0x0e, KEY_MUTE },
 792 /*      { 0x49, KEY_LR },       */              /* L/R */
 793         { 0x07, KEY_SLEEP },            /* Hibernate */
 794         { 0x08, KEY_VIDEO },            /* A/V */
 795         { 0x0e, KEY_MENU },             /* Recall */
 796         { 0x45, KEY_ZOOMIN },
 797         { 0x46, KEY_ZOOMOUT },
 798         { 0x18, KEY_RED },              /* Red */
 799         { 0x53, KEY_GREEN },            /* Green */
 800         { 0x5e, KEY_YELLOW },           /* Yellow */
 801         { 0x5f, KEY_BLUE },             /* Blue */
 802 };
 803 
 804 /* DVB USB Driver stuff */
 805 static struct dvb_usb_device_properties megasky_properties;
 806 static struct dvb_usb_device_properties digivox_mini_ii_properties;
 807 static struct dvb_usb_device_properties tvwalkertwin_properties;
 808 static struct dvb_usb_device_properties dposh_properties;
 809 static struct dvb_usb_device_properties pinnacle_pctv310e_properties;
 810 static struct dvb_usb_device_properties vp7049_properties;
 811 
 812 static int m920x_probe(struct usb_interface *intf,
 813                        const struct usb_device_id *id)
 814 {
 815         struct dvb_usb_device *d = NULL;
 816         int ret;
 817         struct m920x_inits *rc_init_seq = NULL;
 818         int bInterfaceNumber = intf->cur_altsetting->desc.bInterfaceNumber;
 819 
 820         deb("Probing for m920x device at interface %d\n", bInterfaceNumber);
 821 
 822         if (bInterfaceNumber == 0) {
 823                 /* Single-tuner device, or first interface on
 824                  * multi-tuner device
 825                  */
 826 
 827                 ret = dvb_usb_device_init(intf, &megasky_properties,
 828                                           THIS_MODULE, &d, adapter_nr);
 829                 if (ret == 0) {
 830                         rc_init_seq = megasky_rc_init;
 831                         goto found;
 832                 }
 833 
 834                 ret = dvb_usb_device_init(intf, &digivox_mini_ii_properties,
 835                                           THIS_MODULE, &d, adapter_nr);
 836                 if (ret == 0) {
 837                         /* No remote control, so no rc_init_seq */
 838                         goto found;
 839                 }
 840 
 841                 /* This configures both tuners on the TV Walker Twin */
 842                 ret = dvb_usb_device_init(intf, &tvwalkertwin_properties,
 843                                           THIS_MODULE, &d, adapter_nr);
 844                 if (ret == 0) {
 845                         rc_init_seq = tvwalkertwin_rc_init;
 846                         goto found;
 847                 }
 848 
 849                 ret = dvb_usb_device_init(intf, &dposh_properties,
 850                                           THIS_MODULE, &d, adapter_nr);
 851                 if (ret == 0) {
 852                         /* Remote controller not supported yet. */
 853                         goto found;
 854                 }
 855 
 856                 ret = dvb_usb_device_init(intf, &pinnacle_pctv310e_properties,
 857                                           THIS_MODULE, &d, adapter_nr);
 858                 if (ret == 0) {
 859                         rc_init_seq = pinnacle310e_init;
 860                         goto found;
 861                 }
 862 
 863                 ret = dvb_usb_device_init(intf, &vp7049_properties,
 864                                           THIS_MODULE, &d, adapter_nr);
 865                 if (ret == 0) {
 866                         rc_init_seq = vp7049_rc_init;
 867                         goto found;
 868                 }
 869 
 870                 return ret;
 871         } else {
 872                 /* Another interface on a multi-tuner device */
 873 
 874                 /* The LifeView TV Walker Twin gets here, but struct
 875                  * tvwalkertwin_properties already configured both
 876                  * tuners, so there is nothing for us to do here
 877                  */
 878         }
 879 
 880  found:
 881         if ((ret = m920x_init_ep(intf)) < 0)
 882                 return ret;
 883 
 884         if (d && (ret = m920x_init(d, rc_init_seq)) != 0)
 885                 return ret;
 886 
 887         return ret;
 888 }
 889 
 890 static struct usb_device_id m920x_table [] = {
 891                 { USB_DEVICE(USB_VID_MSI, USB_PID_MSI_MEGASKY580) },
 892                 { USB_DEVICE(USB_VID_ANUBIS_ELECTRONIC,
 893                              USB_PID_MSI_DIGI_VOX_MINI_II) },
 894                 { USB_DEVICE(USB_VID_ANUBIS_ELECTRONIC,
 895                              USB_PID_LIFEVIEW_TV_WALKER_TWIN_COLD) },
 896                 { USB_DEVICE(USB_VID_ANUBIS_ELECTRONIC,
 897                              USB_PID_LIFEVIEW_TV_WALKER_TWIN_WARM) },
 898                 { USB_DEVICE(USB_VID_DPOSH, USB_PID_DPOSH_M9206_COLD) },
 899                 { USB_DEVICE(USB_VID_DPOSH, USB_PID_DPOSH_M9206_WARM) },
 900                 { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_PINNACLE_PCTV310E) },
 901                 { USB_DEVICE(USB_VID_AZUREWAVE, USB_PID_TWINHAN_VP7049) },
 902                 { }             /* Terminating entry */
 903 };
 904 MODULE_DEVICE_TABLE (usb, m920x_table);
 905 
 906 static struct dvb_usb_device_properties megasky_properties = {
 907         .caps = DVB_USB_IS_AN_I2C_ADAPTER,
 908 
 909         .usb_ctrl = DEVICE_SPECIFIC,
 910         .firmware = "dvb-usb-megasky-02.fw",
 911         .download_firmware = m920x_firmware_download,
 912 
 913         .rc.legacy = {
 914                 .rc_interval      = 100,
 915                 .rc_map_table     = rc_map_megasky_table,
 916                 .rc_map_size      = ARRAY_SIZE(rc_map_megasky_table),
 917                 .rc_query         = m920x_rc_query,
 918         },
 919 
 920         .size_of_priv     = sizeof(struct m920x_state),
 921 
 922         .identify_state   = m920x_identify_state,
 923         .num_adapters = 1,
 924         .adapter = {{
 925                 .num_frontends = 1,
 926                 .fe = {{
 927 
 928                 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
 929                         DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
 930 
 931                 .pid_filter_count = 8,
 932                 .pid_filter       = m920x_pid_filter,
 933                 .pid_filter_ctrl  = m920x_pid_filter_ctrl,
 934 
 935                 .frontend_attach  = m920x_mt352_frontend_attach,
 936                 .tuner_attach     = m920x_qt1010_tuner_attach,
 937 
 938                 .stream = {
 939                         .type = USB_BULK,
 940                         .count = 8,
 941                         .endpoint = 0x81,
 942                         .u = {
 943                                 .bulk = {
 944                                         .buffersize = 512,
 945                                 }
 946                         }
 947                 },
 948                 }},
 949         }},
 950         .i2c_algo         = &m920x_i2c_algo,
 951 
 952         .num_device_descs = 1,
 953         .devices = {
 954                 {   "MSI Mega Sky 580 DVB-T USB2.0",
 955                         { &m920x_table[0], NULL },
 956                         { NULL },
 957                 }
 958         }
 959 };
 960 
 961 static struct dvb_usb_device_properties digivox_mini_ii_properties = {
 962         .caps = DVB_USB_IS_AN_I2C_ADAPTER,
 963 
 964         .usb_ctrl = DEVICE_SPECIFIC,
 965         .firmware = "dvb-usb-digivox-02.fw",
 966         .download_firmware = m920x_firmware_download,
 967 
 968         .size_of_priv     = sizeof(struct m920x_state),
 969 
 970         .identify_state   = m920x_identify_state,
 971         .num_adapters = 1,
 972         .adapter = {{
 973                 .num_frontends = 1,
 974                 .fe = {{
 975 
 976                 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
 977                         DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
 978 
 979                 .pid_filter_count = 8,
 980                 .pid_filter       = m920x_pid_filter,
 981                 .pid_filter_ctrl  = m920x_pid_filter_ctrl,
 982 
 983                 .frontend_attach  = m920x_tda10046_08_frontend_attach,
 984                 .tuner_attach     = m920x_tda8275_60_tuner_attach,
 985 
 986                 .stream = {
 987                         .type = USB_BULK,
 988                         .count = 8,
 989                         .endpoint = 0x81,
 990                         .u = {
 991                                 .bulk = {
 992                                         .buffersize = 0x4000,
 993                                 }
 994                         }
 995                 },
 996                 }},
 997         }},
 998         .i2c_algo         = &m920x_i2c_algo,
 999 
1000         .num_device_descs = 1,
1001         .devices = {
1002                 {   "MSI DIGI VOX mini II DVB-T USB2.0",
1003                         { &m920x_table[1], NULL },
1004                         { NULL },
1005                 },
1006         }
1007 };
1008 
1009 /* LifeView TV Walker Twin support by Nick Andrew <nick@nick-andrew.net>
1010  *
1011  * LifeView TV Walker Twin has 1 x M9206, 2 x TDA10046, 2 x TDA8275A
1012  * TDA10046 #0 is located at i2c address 0x08
1013  * TDA10046 #1 is located at i2c address 0x0b
1014  * TDA8275A #0 is located at i2c address 0x60
1015  * TDA8275A #1 is located at i2c address 0x61
1016  */
1017 static struct dvb_usb_device_properties tvwalkertwin_properties = {
1018         .caps = DVB_USB_IS_AN_I2C_ADAPTER,
1019 
1020         .usb_ctrl = DEVICE_SPECIFIC,
1021         .firmware = "dvb-usb-tvwalkert.fw",
1022         .download_firmware = m920x_firmware_download,
1023 
1024         .rc.legacy = {
1025                 .rc_interval      = 100,
1026                 .rc_map_table     = rc_map_tvwalkertwin_table,
1027                 .rc_map_size      = ARRAY_SIZE(rc_map_tvwalkertwin_table),
1028                 .rc_query         = m920x_rc_query,
1029         },
1030 
1031         .size_of_priv     = sizeof(struct m920x_state),
1032 
1033         .identify_state   = m920x_identify_state,
1034         .num_adapters = 2,
1035         .adapter = {{
1036                 .num_frontends = 1,
1037                 .fe = {{
1038 
1039                 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
1040                         DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
1041 
1042                 .pid_filter_count = 8,
1043                 .pid_filter       = m920x_pid_filter,
1044                 .pid_filter_ctrl  = m920x_pid_filter_ctrl,
1045 
1046                 .frontend_attach  = m920x_tda10046_08_frontend_attach,
1047                 .tuner_attach     = m920x_tda8275_60_tuner_attach,
1048 
1049                 .stream = {
1050                         .type = USB_BULK,
1051                         .count = 8,
1052                         .endpoint = 0x81,
1053                         .u = {
1054                                  .bulk = {
1055                                          .buffersize = 512,
1056                                  }
1057                         }
1058                 }},
1059                 }},{
1060                 .num_frontends = 1,
1061                 .fe = {{
1062 
1063                 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
1064                         DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
1065 
1066                 .pid_filter_count = 8,
1067                 .pid_filter       = m920x_pid_filter,
1068                 .pid_filter_ctrl  = m920x_pid_filter_ctrl,
1069 
1070                 .frontend_attach  = m920x_tda10046_0b_frontend_attach,
1071                 .tuner_attach     = m920x_tda8275_61_tuner_attach,
1072 
1073                 .stream = {
1074                         .type = USB_BULK,
1075                         .count = 8,
1076                         .endpoint = 0x82,
1077                         .u = {
1078                                  .bulk = {
1079                                          .buffersize = 512,
1080                                  }
1081                         }
1082                 }},
1083                 },
1084         }},
1085         .i2c_algo         = &m920x_i2c_algo,
1086 
1087         .num_device_descs = 1,
1088         .devices = {
1089                 {   .name = "LifeView TV Walker Twin DVB-T USB2.0",
1090                     .cold_ids = { &m920x_table[2], NULL },
1091                     .warm_ids = { &m920x_table[3], NULL },
1092                 },
1093         }
1094 };
1095 
1096 static struct dvb_usb_device_properties dposh_properties = {
1097         .caps = DVB_USB_IS_AN_I2C_ADAPTER,
1098 
1099         .usb_ctrl = DEVICE_SPECIFIC,
1100         .firmware = "dvb-usb-dposh-01.fw",
1101         .download_firmware = m920x_firmware_download,
1102 
1103         .size_of_priv     = sizeof(struct m920x_state),
1104 
1105         .identify_state   = m920x_identify_state,
1106         .num_adapters = 1,
1107         .adapter = {{
1108                 .num_frontends = 1,
1109                 .fe = {{
1110                 /* Hardware pid filters don't work with this device/firmware */
1111 
1112                 .frontend_attach  = m920x_mt352_frontend_attach,
1113                 .tuner_attach     = m920x_qt1010_tuner_attach,
1114 
1115                 .stream = {
1116                         .type = USB_BULK,
1117                         .count = 8,
1118                         .endpoint = 0x81,
1119                         .u = {
1120                                  .bulk = {
1121                                          .buffersize = 512,
1122                                  }
1123                         }
1124                 },
1125                 }},
1126         }},
1127         .i2c_algo         = &m920x_i2c_algo,
1128 
1129         .num_device_descs = 1,
1130         .devices = {
1131                  {   .name = "Dposh DVB-T USB2.0",
1132                      .cold_ids = { &m920x_table[4], NULL },
1133                      .warm_ids = { &m920x_table[5], NULL },
1134                  },
1135          }
1136 };
1137 
1138 static struct dvb_usb_device_properties pinnacle_pctv310e_properties = {
1139         .caps = DVB_USB_IS_AN_I2C_ADAPTER,
1140 
1141         .usb_ctrl = DEVICE_SPECIFIC,
1142         .download_firmware = NULL,
1143 
1144         .rc.legacy = {
1145                 .rc_interval      = 100,
1146                 .rc_map_table     = rc_map_pinnacle310e_table,
1147                 .rc_map_size      = ARRAY_SIZE(rc_map_pinnacle310e_table),
1148                 .rc_query         = m920x_rc_query,
1149         },
1150 
1151         .size_of_priv     = sizeof(struct m920x_state),
1152 
1153         .identify_state   = m920x_identify_state,
1154         .num_adapters = 1,
1155         .adapter = {{
1156                 .num_frontends = 1,
1157                 .fe = {{
1158 
1159                 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
1160                         DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
1161 
1162                 .pid_filter_count = 8,
1163                 .pid_filter       = m920x_pid_filter,
1164                 .pid_filter_ctrl  = m920x_pid_filter_ctrl,
1165 
1166                 .frontend_attach  = m920x_mt352_frontend_attach,
1167                 .tuner_attach     = m920x_fmd1216me_tuner_attach,
1168 
1169                 .stream = {
1170                         .type = USB_ISOC,
1171                         .count = 5,
1172                         .endpoint = 0x84,
1173                         .u = {
1174                                 .isoc = {
1175                                         .framesperurb = 128,
1176                                         .framesize = 564,
1177                                         .interval = 1,
1178                                 }
1179                         }
1180                 },
1181                 }},
1182         } },
1183         .i2c_algo         = &m920x_i2c_algo,
1184 
1185         .num_device_descs = 1,
1186         .devices = {
1187                 {   "Pinnacle PCTV 310e",
1188                         { &m920x_table[6], NULL },
1189                         { NULL },
1190                 }
1191         }
1192 };
1193 
1194 static struct dvb_usb_device_properties vp7049_properties = {
1195         .caps = DVB_USB_IS_AN_I2C_ADAPTER,
1196 
1197         .usb_ctrl = DEVICE_SPECIFIC,
1198         .firmware = "dvb-usb-vp7049-0.95.fw",
1199         .download_firmware = m920x_firmware_download,
1200 
1201         .rc.core = {
1202                 .rc_interval    = 150,
1203                 .rc_codes       = RC_MAP_TWINHAN_VP1027_DVBS,
1204                 .rc_query       = m920x_rc_core_query,
1205                 .allowed_protos = RC_PROTO_BIT_UNKNOWN,
1206         },
1207 
1208         .size_of_priv     = sizeof(struct m920x_state),
1209 
1210         .identify_state   = m920x_identify_state,
1211         .num_adapters = 1,
1212         .adapter = {{
1213                 .num_frontends = 1,
1214                 .fe = {{
1215 
1216                 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
1217                         DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
1218 
1219                 .pid_filter_count = 8,
1220                 .pid_filter       = m920x_pid_filter,
1221                 .pid_filter_ctrl  = m920x_pid_filter_ctrl,
1222 
1223                 .frontend_attach  = m920x_mt352_frontend_attach_vp7049,
1224                 .tuner_attach     = m920x_mt2060_tuner_attach,
1225 
1226                 .stream = {
1227                         .type = USB_BULK,
1228                         .count = 8,
1229                         .endpoint = 0x81,
1230                         .u = {
1231                                  .bulk = {
1232                                          .buffersize = 512,
1233                                  }
1234                         }
1235                 },
1236                 } },
1237         } },
1238         .i2c_algo         = &m920x_i2c_algo,
1239 
1240         .num_device_descs = 1,
1241         .devices = {
1242                 {   "DTV-DVB UDTT7049",
1243                         { &m920x_table[7], NULL },
1244                         { NULL },
1245                 }
1246          }
1247 };
1248 
1249 static struct usb_driver m920x_driver = {
1250         .name           = "dvb_usb_m920x",
1251         .probe          = m920x_probe,
1252         .disconnect     = dvb_usb_device_exit,
1253         .id_table       = m920x_table,
1254 };
1255 
1256 module_usb_driver(m920x_driver);
1257 
1258 MODULE_AUTHOR("Aapo Tahkola <aet@rasterburn.org>");
1259 MODULE_DESCRIPTION("DVB Driver for ULI M920x");
1260 MODULE_VERSION("0.1");
1261 MODULE_LICENSE("GPL");

/* [<][>][^][v][top][bottom][index][help] */