root/drivers/media/usb/cpia2/cpia2_v4l.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. cpia2_open
  2. cpia2_close
  3. cpia2_v4l_read
  4. cpia2_v4l_poll
  5. sync
  6. cpia2_querycap
  7. cpia2_enum_input
  8. cpia2_g_input
  9. cpia2_s_input
  10. cpia2_enum_fmt_vid_cap
  11. cpia2_try_fmt_vid_cap
  12. cpia2_s_fmt_vid_cap
  13. cpia2_g_fmt_vid_cap
  14. cpia2_g_selection
  15. cpia2_g_parm
  16. cpia2_s_parm
  17. cpia2_enum_framesizes
  18. cpia2_enum_frameintervals
  19. cpia2_s_ctrl
  20. cpia2_g_jpegcomp
  21. cpia2_s_jpegcomp
  22. cpia2_reqbufs
  23. cpia2_querybuf
  24. cpia2_qbuf
  25. find_earliest_filled_buffer
  26. cpia2_dqbuf
  27. cpia2_streamon
  28. cpia2_streamoff
  29. cpia2_mmap
  30. reset_camera_struct_v4l
  31. cpia2_camera_release
  32. cpia2_register_camera
  33. cpia2_unregister_camera
  34. check_parameters
  35. cpia2_init
  36. cpia2_exit

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /****************************************************************************
   3  *
   4  *  Filename: cpia2_v4l.c
   5  *
   6  *  Copyright 2001, STMicrolectronics, Inc.
   7  *      Contact:  steve.miller@st.com
   8  *  Copyright 2001,2005, Scott J. Bertin <scottbertin@yahoo.com>
   9  *
  10  *  Description:
  11  *     This is a USB driver for CPia2 based video cameras.
  12  *     The infrastructure of this driver is based on the cpia usb driver by
  13  *     Jochen Scharrlach and Johannes Erdfeldt.
  14  *
  15  *  Stripped of 2.4 stuff ready for main kernel submit by
  16  *              Alan Cox <alan@lxorguk.ukuu.org.uk>
  17  ****************************************************************************/
  18 
  19 #define CPIA_VERSION "3.0.1"
  20 
  21 #include <linux/module.h>
  22 #include <linux/time.h>
  23 #include <linux/sched.h>
  24 #include <linux/slab.h>
  25 #include <linux/init.h>
  26 #include <linux/videodev2.h>
  27 #include <linux/stringify.h>
  28 #include <media/v4l2-ioctl.h>
  29 #include <media/v4l2-event.h>
  30 
  31 #include "cpia2.h"
  32 
  33 static int video_nr = -1;
  34 module_param(video_nr, int, 0);
  35 MODULE_PARM_DESC(video_nr, "video device to register (0=/dev/video0, etc)");
  36 
  37 static int buffer_size = 68 * 1024;
  38 module_param(buffer_size, int, 0);
  39 MODULE_PARM_DESC(buffer_size, "Size for each frame buffer in bytes (default 68k)");
  40 
  41 static int num_buffers = 3;
  42 module_param(num_buffers, int, 0);
  43 MODULE_PARM_DESC(num_buffers, "Number of frame buffers (1-"
  44                  __stringify(VIDEO_MAX_FRAME) ", default 3)");
  45 
  46 static int alternate = DEFAULT_ALT;
  47 module_param(alternate, int, 0);
  48 MODULE_PARM_DESC(alternate, "USB Alternate (" __stringify(USBIF_ISO_1) "-"
  49                  __stringify(USBIF_ISO_6) ", default "
  50                  __stringify(DEFAULT_ALT) ")");
  51 
  52 static int flicker_mode;
  53 module_param(flicker_mode, int, 0);
  54 MODULE_PARM_DESC(flicker_mode, "Flicker frequency (0 (disabled), " __stringify(50) " or "
  55                  __stringify(60) ", default 0)");
  56 
  57 MODULE_AUTHOR("Steve Miller (STMicroelectronics) <steve.miller@st.com>");
  58 MODULE_DESCRIPTION("V4L-driver for STMicroelectronics CPiA2 based cameras");
  59 MODULE_SUPPORTED_DEVICE("video");
  60 MODULE_LICENSE("GPL");
  61 MODULE_VERSION(CPIA_VERSION);
  62 
  63 #define ABOUT "V4L-Driver for Vision CPiA2 based cameras"
  64 #define CPIA2_CID_USB_ALT (V4L2_CID_USER_BASE | 0xf000)
  65 
  66 /******************************************************************************
  67  *
  68  *  cpia2_open
  69  *
  70  *****************************************************************************/
  71 static int cpia2_open(struct file *file)
  72 {
  73         struct camera_data *cam = video_drvdata(file);
  74         int retval;
  75 
  76         if (mutex_lock_interruptible(&cam->v4l2_lock))
  77                 return -ERESTARTSYS;
  78         retval = v4l2_fh_open(file);
  79         if (retval)
  80                 goto open_unlock;
  81 
  82         if (v4l2_fh_is_singular_file(file)) {
  83                 if (cpia2_allocate_buffers(cam)) {
  84                         v4l2_fh_release(file);
  85                         retval = -ENOMEM;
  86                         goto open_unlock;
  87                 }
  88 
  89                 /* reset the camera */
  90                 if (cpia2_reset_camera(cam) < 0) {
  91                         v4l2_fh_release(file);
  92                         retval = -EIO;
  93                         goto open_unlock;
  94                 }
  95 
  96                 cam->APP_len = 0;
  97                 cam->COM_len = 0;
  98         }
  99 
 100         cpia2_dbg_dump_registers(cam);
 101 open_unlock:
 102         mutex_unlock(&cam->v4l2_lock);
 103         return retval;
 104 }
 105 
 106 /******************************************************************************
 107  *
 108  *  cpia2_close
 109  *
 110  *****************************************************************************/
 111 static int cpia2_close(struct file *file)
 112 {
 113         struct video_device *dev = video_devdata(file);
 114         struct camera_data *cam = video_get_drvdata(dev);
 115 
 116         mutex_lock(&cam->v4l2_lock);
 117         if (video_is_registered(&cam->vdev) && v4l2_fh_is_singular_file(file)) {
 118                 cpia2_usb_stream_stop(cam);
 119 
 120                 /* save camera state for later open */
 121                 cpia2_save_camera_state(cam);
 122 
 123                 cpia2_set_low_power(cam);
 124                 cpia2_free_buffers(cam);
 125         }
 126 
 127         if (cam->stream_fh == file->private_data) {
 128                 cam->stream_fh = NULL;
 129                 cam->mmapped = 0;
 130         }
 131         mutex_unlock(&cam->v4l2_lock);
 132         return v4l2_fh_release(file);
 133 }
 134 
 135 /******************************************************************************
 136  *
 137  *  cpia2_v4l_read
 138  *
 139  *****************************************************************************/
 140 static ssize_t cpia2_v4l_read(struct file *file, char __user *buf, size_t count,
 141                               loff_t *off)
 142 {
 143         struct camera_data *cam = video_drvdata(file);
 144         int noblock = file->f_flags&O_NONBLOCK;
 145         ssize_t ret;
 146 
 147         if(!cam)
 148                 return -EINVAL;
 149 
 150         if (mutex_lock_interruptible(&cam->v4l2_lock))
 151                 return -ERESTARTSYS;
 152         ret = cpia2_read(cam, buf, count, noblock);
 153         mutex_unlock(&cam->v4l2_lock);
 154         return ret;
 155 }
 156 
 157 
 158 /******************************************************************************
 159  *
 160  *  cpia2_v4l_poll
 161  *
 162  *****************************************************************************/
 163 static __poll_t cpia2_v4l_poll(struct file *filp, struct poll_table_struct *wait)
 164 {
 165         struct camera_data *cam = video_drvdata(filp);
 166         __poll_t res;
 167 
 168         mutex_lock(&cam->v4l2_lock);
 169         res = cpia2_poll(cam, filp, wait);
 170         mutex_unlock(&cam->v4l2_lock);
 171         return res;
 172 }
 173 
 174 
 175 static int sync(struct camera_data *cam, int frame_nr)
 176 {
 177         struct framebuf *frame = &cam->buffers[frame_nr];
 178 
 179         while (1) {
 180                 if (frame->status == FRAME_READY)
 181                         return 0;
 182 
 183                 if (!cam->streaming) {
 184                         frame->status = FRAME_READY;
 185                         frame->length = 0;
 186                         return 0;
 187                 }
 188 
 189                 mutex_unlock(&cam->v4l2_lock);
 190                 wait_event_interruptible(cam->wq_stream,
 191                                          !cam->streaming ||
 192                                          frame->status == FRAME_READY);
 193                 mutex_lock(&cam->v4l2_lock);
 194                 if (signal_pending(current))
 195                         return -ERESTARTSYS;
 196                 if (!video_is_registered(&cam->vdev))
 197                         return -ENOTTY;
 198         }
 199 }
 200 
 201 /******************************************************************************
 202  *
 203  *  ioctl_querycap
 204  *
 205  *  V4L2 device capabilities
 206  *
 207  *****************************************************************************/
 208 
 209 static int cpia2_querycap(struct file *file, void *fh, struct v4l2_capability *vc)
 210 {
 211         struct camera_data *cam = video_drvdata(file);
 212 
 213         strscpy(vc->driver, "cpia2", sizeof(vc->driver));
 214 
 215         if (cam->params.pnp_id.product == 0x151)
 216                 strscpy(vc->card, "QX5 Microscope", sizeof(vc->card));
 217         else
 218                 strscpy(vc->card, "CPiA2 Camera", sizeof(vc->card));
 219         switch (cam->params.pnp_id.device_type) {
 220         case DEVICE_STV_672:
 221                 strcat(vc->card, " (672/");
 222                 break;
 223         case DEVICE_STV_676:
 224                 strcat(vc->card, " (676/");
 225                 break;
 226         default:
 227                 strcat(vc->card, " (XXX/");
 228                 break;
 229         }
 230         switch (cam->params.version.sensor_flags) {
 231         case CPIA2_VP_SENSOR_FLAGS_404:
 232                 strcat(vc->card, "404)");
 233                 break;
 234         case CPIA2_VP_SENSOR_FLAGS_407:
 235                 strcat(vc->card, "407)");
 236                 break;
 237         case CPIA2_VP_SENSOR_FLAGS_409:
 238                 strcat(vc->card, "409)");
 239                 break;
 240         case CPIA2_VP_SENSOR_FLAGS_410:
 241                 strcat(vc->card, "410)");
 242                 break;
 243         case CPIA2_VP_SENSOR_FLAGS_500:
 244                 strcat(vc->card, "500)");
 245                 break;
 246         default:
 247                 strcat(vc->card, "XXX)");
 248                 break;
 249         }
 250 
 251         if (usb_make_path(cam->dev, vc->bus_info, sizeof(vc->bus_info)) <0)
 252                 memset(vc->bus_info,0, sizeof(vc->bus_info));
 253         return 0;
 254 }
 255 
 256 /******************************************************************************
 257  *
 258  *  ioctl_input
 259  *
 260  *  V4L2 input get/set/enumerate
 261  *
 262  *****************************************************************************/
 263 
 264 static int cpia2_enum_input(struct file *file, void *fh, struct v4l2_input *i)
 265 {
 266         if (i->index)
 267                 return -EINVAL;
 268         strscpy(i->name, "Camera", sizeof(i->name));
 269         i->type = V4L2_INPUT_TYPE_CAMERA;
 270         return 0;
 271 }
 272 
 273 static int cpia2_g_input(struct file *file, void *fh, unsigned int *i)
 274 {
 275         *i = 0;
 276         return 0;
 277 }
 278 
 279 static int cpia2_s_input(struct file *file, void *fh, unsigned int i)
 280 {
 281         return i ? -EINVAL : 0;
 282 }
 283 
 284 /******************************************************************************
 285  *
 286  *  ioctl_enum_fmt
 287  *
 288  *  V4L2 format enumerate
 289  *
 290  *****************************************************************************/
 291 
 292 static int cpia2_enum_fmt_vid_cap(struct file *file, void *fh,
 293                                             struct v4l2_fmtdesc *f)
 294 {
 295         if (f->index > 1)
 296                 return -EINVAL;
 297 
 298         if (f->index == 0)
 299                 f->pixelformat = V4L2_PIX_FMT_MJPEG;
 300         else
 301                 f->pixelformat = V4L2_PIX_FMT_JPEG;
 302         return 0;
 303 }
 304 
 305 /******************************************************************************
 306  *
 307  *  ioctl_try_fmt
 308  *
 309  *  V4L2 format try
 310  *
 311  *****************************************************************************/
 312 
 313 static int cpia2_try_fmt_vid_cap(struct file *file, void *fh,
 314                                           struct v4l2_format *f)
 315 {
 316         struct camera_data *cam = video_drvdata(file);
 317 
 318         if (f->fmt.pix.pixelformat != V4L2_PIX_FMT_MJPEG &&
 319             f->fmt.pix.pixelformat != V4L2_PIX_FMT_JPEG)
 320                return -EINVAL;
 321 
 322         f->fmt.pix.field = V4L2_FIELD_NONE;
 323         f->fmt.pix.bytesperline = 0;
 324         f->fmt.pix.sizeimage = cam->frame_size;
 325         f->fmt.pix.colorspace = V4L2_COLORSPACE_JPEG;
 326 
 327         switch (cpia2_match_video_size(f->fmt.pix.width, f->fmt.pix.height)) {
 328         case VIDEOSIZE_VGA:
 329                 f->fmt.pix.width = 640;
 330                 f->fmt.pix.height = 480;
 331                 break;
 332         case VIDEOSIZE_CIF:
 333                 f->fmt.pix.width = 352;
 334                 f->fmt.pix.height = 288;
 335                 break;
 336         case VIDEOSIZE_QVGA:
 337                 f->fmt.pix.width = 320;
 338                 f->fmt.pix.height = 240;
 339                 break;
 340         case VIDEOSIZE_288_216:
 341                 f->fmt.pix.width = 288;
 342                 f->fmt.pix.height = 216;
 343                 break;
 344         case VIDEOSIZE_256_192:
 345                 f->fmt.pix.width = 256;
 346                 f->fmt.pix.height = 192;
 347                 break;
 348         case VIDEOSIZE_224_168:
 349                 f->fmt.pix.width = 224;
 350                 f->fmt.pix.height = 168;
 351                 break;
 352         case VIDEOSIZE_192_144:
 353                 f->fmt.pix.width = 192;
 354                 f->fmt.pix.height = 144;
 355                 break;
 356         case VIDEOSIZE_QCIF:
 357         default:
 358                 f->fmt.pix.width = 176;
 359                 f->fmt.pix.height = 144;
 360                 break;
 361         }
 362 
 363         return 0;
 364 }
 365 
 366 /******************************************************************************
 367  *
 368  *  ioctl_set_fmt
 369  *
 370  *  V4L2 format set
 371  *
 372  *****************************************************************************/
 373 
 374 static int cpia2_s_fmt_vid_cap(struct file *file, void *_fh,
 375                                         struct v4l2_format *f)
 376 {
 377         struct camera_data *cam = video_drvdata(file);
 378         int err, frame;
 379 
 380         err = cpia2_try_fmt_vid_cap(file, _fh, f);
 381         if(err != 0)
 382                 return err;
 383 
 384         cam->pixelformat = f->fmt.pix.pixelformat;
 385 
 386         /* NOTE: This should be set to 1 for MJPEG, but some apps don't handle
 387          * the missing Huffman table properly. */
 388         cam->params.compression.inhibit_htables = 0;
 389                 /*f->fmt.pix.pixelformat == V4L2_PIX_FMT_MJPEG;*/
 390 
 391         /* we set the video window to something smaller or equal to what
 392          * is requested by the user???
 393          */
 394         DBG("Requested width = %d, height = %d\n",
 395             f->fmt.pix.width, f->fmt.pix.height);
 396         if (f->fmt.pix.width != cam->width ||
 397             f->fmt.pix.height != cam->height) {
 398                 cam->width = f->fmt.pix.width;
 399                 cam->height = f->fmt.pix.height;
 400                 cam->params.roi.width = f->fmt.pix.width;
 401                 cam->params.roi.height = f->fmt.pix.height;
 402                 cpia2_set_format(cam);
 403         }
 404 
 405         for (frame = 0; frame < cam->num_frames; ++frame) {
 406                 if (cam->buffers[frame].status == FRAME_READING)
 407                         if ((err = sync(cam, frame)) < 0)
 408                                 return err;
 409 
 410                 cam->buffers[frame].status = FRAME_EMPTY;
 411         }
 412 
 413         return 0;
 414 }
 415 
 416 /******************************************************************************
 417  *
 418  *  ioctl_get_fmt
 419  *
 420  *  V4L2 format get
 421  *
 422  *****************************************************************************/
 423 
 424 static int cpia2_g_fmt_vid_cap(struct file *file, void *fh,
 425                                         struct v4l2_format *f)
 426 {
 427         struct camera_data *cam = video_drvdata(file);
 428 
 429         f->fmt.pix.width = cam->width;
 430         f->fmt.pix.height = cam->height;
 431         f->fmt.pix.pixelformat = cam->pixelformat;
 432         f->fmt.pix.field = V4L2_FIELD_NONE;
 433         f->fmt.pix.bytesperline = 0;
 434         f->fmt.pix.sizeimage = cam->frame_size;
 435         f->fmt.pix.colorspace = V4L2_COLORSPACE_JPEG;
 436 
 437         return 0;
 438 }
 439 
 440 /******************************************************************************
 441  *
 442  *  ioctl_cropcap
 443  *
 444  *  V4L2 query cropping capabilities
 445  *  NOTE: cropping is currently disabled
 446  *
 447  *****************************************************************************/
 448 
 449 static int cpia2_g_selection(struct file *file, void *fh,
 450                              struct v4l2_selection *s)
 451 {
 452         struct camera_data *cam = video_drvdata(file);
 453 
 454         if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 455                 return -EINVAL;
 456 
 457         switch (s->target) {
 458         case V4L2_SEL_TGT_CROP_BOUNDS:
 459         case V4L2_SEL_TGT_CROP_DEFAULT:
 460                 s->r.left = 0;
 461                 s->r.top = 0;
 462                 s->r.width = cam->width;
 463                 s->r.height = cam->height;
 464                 break;
 465         default:
 466                 return -EINVAL;
 467         }
 468         return 0;
 469 }
 470 
 471 struct framerate_info {
 472         int value;
 473         struct v4l2_fract period;
 474 };
 475 
 476 static const struct framerate_info framerate_controls[] = {
 477         { CPIA2_VP_FRAMERATE_6_25, { 4, 25 } },
 478         { CPIA2_VP_FRAMERATE_7_5,  { 2, 15 } },
 479         { CPIA2_VP_FRAMERATE_12_5, { 2, 25 } },
 480         { CPIA2_VP_FRAMERATE_15,   { 1, 15 } },
 481         { CPIA2_VP_FRAMERATE_25,   { 1, 25 } },
 482         { CPIA2_VP_FRAMERATE_30,   { 1, 30 } },
 483 };
 484 
 485 static int cpia2_g_parm(struct file *file, void *fh, struct v4l2_streamparm *p)
 486 {
 487         struct camera_data *cam = video_drvdata(file);
 488         struct v4l2_captureparm *cap = &p->parm.capture;
 489         int i;
 490 
 491         if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 492                 return -EINVAL;
 493 
 494         cap->capability = V4L2_CAP_TIMEPERFRAME;
 495         cap->readbuffers = cam->num_frames;
 496         for (i = 0; i < ARRAY_SIZE(framerate_controls); i++)
 497                 if (cam->params.vp_params.frame_rate == framerate_controls[i].value) {
 498                         cap->timeperframe = framerate_controls[i].period;
 499                         break;
 500                 }
 501         return 0;
 502 }
 503 
 504 static int cpia2_s_parm(struct file *file, void *fh, struct v4l2_streamparm *p)
 505 {
 506         struct camera_data *cam = video_drvdata(file);
 507         struct v4l2_captureparm *cap = &p->parm.capture;
 508         struct v4l2_fract tpf = cap->timeperframe;
 509         int max = ARRAY_SIZE(framerate_controls) - 1;
 510         int ret;
 511         int i;
 512 
 513         ret = cpia2_g_parm(file, fh, p);
 514         if (ret || !tpf.denominator || !tpf.numerator)
 515                 return ret;
 516 
 517         /* Maximum 15 fps for this model */
 518         if (cam->params.pnp_id.device_type == DEVICE_STV_672 &&
 519             cam->params.version.sensor_flags == CPIA2_VP_SENSOR_FLAGS_500)
 520                 max -= 2;
 521         for (i = 0; i <= max; i++) {
 522                 struct v4l2_fract f1 = tpf;
 523                 struct v4l2_fract f2 = framerate_controls[i].period;
 524 
 525                 f1.numerator *= f2.denominator;
 526                 f2.numerator *= f1.denominator;
 527                 if (f1.numerator >= f2.numerator)
 528                         break;
 529         }
 530         if (i > max)
 531                 i = max;
 532         cap->timeperframe = framerate_controls[i].period;
 533         return cpia2_set_fps(cam, framerate_controls[i].value);
 534 }
 535 
 536 static const struct {
 537         u32 width;
 538         u32 height;
 539 } cpia2_framesizes[] = {
 540         { 640, 480 },
 541         { 352, 288 },
 542         { 320, 240 },
 543         { 288, 216 },
 544         { 256, 192 },
 545         { 224, 168 },
 546         { 192, 144 },
 547         { 176, 144 },
 548 };
 549 
 550 static int cpia2_enum_framesizes(struct file *file, void *fh,
 551                                          struct v4l2_frmsizeenum *fsize)
 552 {
 553 
 554         if (fsize->pixel_format != V4L2_PIX_FMT_MJPEG &&
 555             fsize->pixel_format != V4L2_PIX_FMT_JPEG)
 556                 return -EINVAL;
 557         if (fsize->index >= ARRAY_SIZE(cpia2_framesizes))
 558                 return -EINVAL;
 559         fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
 560         fsize->discrete.width = cpia2_framesizes[fsize->index].width;
 561         fsize->discrete.height = cpia2_framesizes[fsize->index].height;
 562 
 563         return 0;
 564 }
 565 
 566 static int cpia2_enum_frameintervals(struct file *file, void *fh,
 567                                            struct v4l2_frmivalenum *fival)
 568 {
 569         struct camera_data *cam = video_drvdata(file);
 570         int max = ARRAY_SIZE(framerate_controls) - 1;
 571         int i;
 572 
 573         if (fival->pixel_format != V4L2_PIX_FMT_MJPEG &&
 574             fival->pixel_format != V4L2_PIX_FMT_JPEG)
 575                 return -EINVAL;
 576 
 577         /* Maximum 15 fps for this model */
 578         if (cam->params.pnp_id.device_type == DEVICE_STV_672 &&
 579             cam->params.version.sensor_flags == CPIA2_VP_SENSOR_FLAGS_500)
 580                 max -= 2;
 581         if (fival->index > max)
 582                 return -EINVAL;
 583         for (i = 0; i < ARRAY_SIZE(cpia2_framesizes); i++)
 584                 if (fival->width == cpia2_framesizes[i].width &&
 585                     fival->height == cpia2_framesizes[i].height)
 586                         break;
 587         if (i == ARRAY_SIZE(cpia2_framesizes))
 588                 return -EINVAL;
 589         fival->type = V4L2_FRMIVAL_TYPE_DISCRETE;
 590         fival->discrete = framerate_controls[fival->index].period;
 591         return 0;
 592 }
 593 
 594 /******************************************************************************
 595  *
 596  *  ioctl_s_ctrl
 597  *
 598  *  V4L2 set the value of a control variable
 599  *
 600  *****************************************************************************/
 601 
 602 static int cpia2_s_ctrl(struct v4l2_ctrl *ctrl)
 603 {
 604         struct camera_data *cam =
 605                 container_of(ctrl->handler, struct camera_data, hdl);
 606         static const int flicker_table[] = {
 607                 NEVER_FLICKER,
 608                 FLICKER_50,
 609                 FLICKER_60,
 610         };
 611 
 612         DBG("Set control id:%d, value:%d\n", ctrl->id, ctrl->val);
 613 
 614         switch (ctrl->id) {
 615         case V4L2_CID_BRIGHTNESS:
 616                 cpia2_set_brightness(cam, ctrl->val);
 617                 break;
 618         case V4L2_CID_CONTRAST:
 619                 cpia2_set_contrast(cam, ctrl->val);
 620                 break;
 621         case V4L2_CID_SATURATION:
 622                 cpia2_set_saturation(cam, ctrl->val);
 623                 break;
 624         case V4L2_CID_HFLIP:
 625                 cpia2_set_property_mirror(cam, ctrl->val);
 626                 break;
 627         case V4L2_CID_VFLIP:
 628                 cpia2_set_property_flip(cam, ctrl->val);
 629                 break;
 630         case V4L2_CID_POWER_LINE_FREQUENCY:
 631                 return cpia2_set_flicker_mode(cam, flicker_table[ctrl->val]);
 632         case V4L2_CID_ILLUMINATORS_1:
 633                 return cpia2_set_gpio(cam, (cam->top_light->val << 6) |
 634                                            (cam->bottom_light->val << 7));
 635         case V4L2_CID_JPEG_ACTIVE_MARKER:
 636                 cam->params.compression.inhibit_htables =
 637                         !(ctrl->val & V4L2_JPEG_ACTIVE_MARKER_DHT);
 638                 break;
 639         case V4L2_CID_JPEG_COMPRESSION_QUALITY:
 640                 cam->params.vc_params.quality = ctrl->val;
 641                 break;
 642         case CPIA2_CID_USB_ALT:
 643                 cam->params.camera_state.stream_mode = ctrl->val;
 644                 break;
 645         default:
 646                 return -EINVAL;
 647         }
 648 
 649         return 0;
 650 }
 651 
 652 /******************************************************************************
 653  *
 654  *  ioctl_g_jpegcomp
 655  *
 656  *  V4L2 get the JPEG compression parameters
 657  *
 658  *****************************************************************************/
 659 
 660 static int cpia2_g_jpegcomp(struct file *file, void *fh, struct v4l2_jpegcompression *parms)
 661 {
 662         struct camera_data *cam = video_drvdata(file);
 663 
 664         memset(parms, 0, sizeof(*parms));
 665 
 666         parms->quality = 80; // TODO: Can this be made meaningful?
 667 
 668         parms->jpeg_markers = V4L2_JPEG_MARKER_DQT | V4L2_JPEG_MARKER_DRI;
 669         if(!cam->params.compression.inhibit_htables) {
 670                 parms->jpeg_markers |= V4L2_JPEG_MARKER_DHT;
 671         }
 672 
 673         parms->APPn = cam->APPn;
 674         parms->APP_len = cam->APP_len;
 675         if(cam->APP_len > 0) {
 676                 memcpy(parms->APP_data, cam->APP_data, cam->APP_len);
 677                 parms->jpeg_markers |= V4L2_JPEG_MARKER_APP;
 678         }
 679 
 680         parms->COM_len = cam->COM_len;
 681         if(cam->COM_len > 0) {
 682                 memcpy(parms->COM_data, cam->COM_data, cam->COM_len);
 683                 parms->jpeg_markers |= JPEG_MARKER_COM;
 684         }
 685 
 686         DBG("G_JPEGCOMP APP_len:%d COM_len:%d\n",
 687             parms->APP_len, parms->COM_len);
 688 
 689         return 0;
 690 }
 691 
 692 /******************************************************************************
 693  *
 694  *  ioctl_s_jpegcomp
 695  *
 696  *  V4L2 set the JPEG compression parameters
 697  *  NOTE: quality and some jpeg_markers are ignored.
 698  *
 699  *****************************************************************************/
 700 
 701 static int cpia2_s_jpegcomp(struct file *file, void *fh,
 702                 const struct v4l2_jpegcompression *parms)
 703 {
 704         struct camera_data *cam = video_drvdata(file);
 705 
 706         DBG("S_JPEGCOMP APP_len:%d COM_len:%d\n",
 707             parms->APP_len, parms->COM_len);
 708 
 709         cam->params.compression.inhibit_htables =
 710                 !(parms->jpeg_markers & V4L2_JPEG_MARKER_DHT);
 711 
 712         if(parms->APP_len != 0) {
 713                 if(parms->APP_len > 0 &&
 714                    parms->APP_len <= sizeof(cam->APP_data) &&
 715                    parms->APPn >= 0 && parms->APPn <= 15) {
 716                         cam->APPn = parms->APPn;
 717                         cam->APP_len = parms->APP_len;
 718                         memcpy(cam->APP_data, parms->APP_data, parms->APP_len);
 719                 } else {
 720                         LOG("Bad APPn Params n=%d len=%d\n",
 721                             parms->APPn, parms->APP_len);
 722                         return -EINVAL;
 723                 }
 724         } else {
 725                 cam->APP_len = 0;
 726         }
 727 
 728         if(parms->COM_len != 0) {
 729                 if(parms->COM_len > 0 &&
 730                    parms->COM_len <= sizeof(cam->COM_data)) {
 731                         cam->COM_len = parms->COM_len;
 732                         memcpy(cam->COM_data, parms->COM_data, parms->COM_len);
 733                 } else {
 734                         LOG("Bad COM_len=%d\n", parms->COM_len);
 735                         return -EINVAL;
 736                 }
 737         }
 738 
 739         return 0;
 740 }
 741 
 742 /******************************************************************************
 743  *
 744  *  ioctl_reqbufs
 745  *
 746  *  V4L2 Initiate memory mapping.
 747  *  NOTE: The user's request is ignored. For now the buffers are fixed.
 748  *
 749  *****************************************************************************/
 750 
 751 static int cpia2_reqbufs(struct file *file, void *fh, struct v4l2_requestbuffers *req)
 752 {
 753         struct camera_data *cam = video_drvdata(file);
 754 
 755         if(req->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
 756            req->memory != V4L2_MEMORY_MMAP)
 757                 return -EINVAL;
 758 
 759         DBG("REQBUFS requested:%d returning:%d\n", req->count, cam->num_frames);
 760         req->count = cam->num_frames;
 761         memset(&req->reserved, 0, sizeof(req->reserved));
 762 
 763         return 0;
 764 }
 765 
 766 /******************************************************************************
 767  *
 768  *  ioctl_querybuf
 769  *
 770  *  V4L2 Query memory buffer status.
 771  *
 772  *****************************************************************************/
 773 
 774 static int cpia2_querybuf(struct file *file, void *fh, struct v4l2_buffer *buf)
 775 {
 776         struct camera_data *cam = video_drvdata(file);
 777 
 778         if(buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
 779            buf->index >= cam->num_frames)
 780                 return -EINVAL;
 781 
 782         buf->m.offset = cam->buffers[buf->index].data - cam->frame_buffer;
 783         buf->length = cam->frame_size;
 784 
 785         buf->memory = V4L2_MEMORY_MMAP;
 786 
 787         if(cam->mmapped)
 788                 buf->flags = V4L2_BUF_FLAG_MAPPED;
 789         else
 790                 buf->flags = 0;
 791 
 792         buf->flags |= V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
 793 
 794         switch (cam->buffers[buf->index].status) {
 795         case FRAME_EMPTY:
 796         case FRAME_ERROR:
 797         case FRAME_READING:
 798                 buf->bytesused = 0;
 799                 buf->flags = V4L2_BUF_FLAG_QUEUED;
 800                 break;
 801         case FRAME_READY:
 802                 buf->bytesused = cam->buffers[buf->index].length;
 803                 buf->timestamp = ns_to_timeval(cam->buffers[buf->index].ts);
 804                 buf->sequence = cam->buffers[buf->index].seq;
 805                 buf->flags = V4L2_BUF_FLAG_DONE;
 806                 break;
 807         }
 808 
 809         DBG("QUERYBUF index:%d offset:%d flags:%d seq:%d bytesused:%d\n",
 810              buf->index, buf->m.offset, buf->flags, buf->sequence,
 811              buf->bytesused);
 812 
 813         return 0;
 814 }
 815 
 816 /******************************************************************************
 817  *
 818  *  ioctl_qbuf
 819  *
 820  *  V4L2 User is freeing buffer
 821  *
 822  *****************************************************************************/
 823 
 824 static int cpia2_qbuf(struct file *file, void *fh, struct v4l2_buffer *buf)
 825 {
 826         struct camera_data *cam = video_drvdata(file);
 827 
 828         if(buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
 829            buf->memory != V4L2_MEMORY_MMAP ||
 830            buf->index >= cam->num_frames)
 831                 return -EINVAL;
 832 
 833         DBG("QBUF #%d\n", buf->index);
 834 
 835         if(cam->buffers[buf->index].status == FRAME_READY)
 836                 cam->buffers[buf->index].status = FRAME_EMPTY;
 837 
 838         return 0;
 839 }
 840 
 841 /******************************************************************************
 842  *
 843  *  find_earliest_filled_buffer
 844  *
 845  *  Helper for ioctl_dqbuf. Find the next ready buffer.
 846  *
 847  *****************************************************************************/
 848 
 849 static int find_earliest_filled_buffer(struct camera_data *cam)
 850 {
 851         int i;
 852         int found = -1;
 853         for (i=0; i<cam->num_frames; i++) {
 854                 if(cam->buffers[i].status == FRAME_READY) {
 855                         if(found < 0) {
 856                                 found = i;
 857                         } else {
 858                                 /* find which buffer is earlier */
 859                                 if (cam->buffers[i].ts < cam->buffers[found].ts)
 860                                         found = i;
 861                         }
 862                 }
 863         }
 864         return found;
 865 }
 866 
 867 /******************************************************************************
 868  *
 869  *  ioctl_dqbuf
 870  *
 871  *  V4L2 User is asking for a filled buffer.
 872  *
 873  *****************************************************************************/
 874 
 875 static int cpia2_dqbuf(struct file *file, void *fh, struct v4l2_buffer *buf)
 876 {
 877         struct camera_data *cam = video_drvdata(file);
 878         int frame;
 879 
 880         if(buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
 881            buf->memory != V4L2_MEMORY_MMAP)
 882                 return -EINVAL;
 883 
 884         frame = find_earliest_filled_buffer(cam);
 885 
 886         if(frame < 0 && file->f_flags&O_NONBLOCK)
 887                 return -EAGAIN;
 888 
 889         if(frame < 0) {
 890                 /* Wait for a frame to become available */
 891                 struct framebuf *cb=cam->curbuff;
 892                 mutex_unlock(&cam->v4l2_lock);
 893                 wait_event_interruptible(cam->wq_stream,
 894                                          !video_is_registered(&cam->vdev) ||
 895                                          (cb=cam->curbuff)->status == FRAME_READY);
 896                 mutex_lock(&cam->v4l2_lock);
 897                 if (signal_pending(current))
 898                         return -ERESTARTSYS;
 899                 if (!video_is_registered(&cam->vdev))
 900                         return -ENOTTY;
 901                 frame = cb->num;
 902         }
 903 
 904 
 905         buf->index = frame;
 906         buf->bytesused = cam->buffers[buf->index].length;
 907         buf->flags = V4L2_BUF_FLAG_MAPPED | V4L2_BUF_FLAG_DONE
 908                 | V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
 909         buf->field = V4L2_FIELD_NONE;
 910         buf->timestamp = ns_to_timeval(cam->buffers[buf->index].ts);
 911         buf->sequence = cam->buffers[buf->index].seq;
 912         buf->m.offset = cam->buffers[buf->index].data - cam->frame_buffer;
 913         buf->length = cam->frame_size;
 914         buf->reserved2 = 0;
 915         buf->request_fd = 0;
 916         memset(&buf->timecode, 0, sizeof(buf->timecode));
 917 
 918         DBG("DQBUF #%d status:%d seq:%d length:%d\n", buf->index,
 919             cam->buffers[buf->index].status, buf->sequence, buf->bytesused);
 920 
 921         return 0;
 922 }
 923 
 924 static int cpia2_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 925 {
 926         struct camera_data *cam = video_drvdata(file);
 927         int ret = -EINVAL;
 928 
 929         DBG("VIDIOC_STREAMON, streaming=%d\n", cam->streaming);
 930         if (!cam->mmapped || type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 931                 return -EINVAL;
 932 
 933         if (!cam->streaming) {
 934                 ret = cpia2_usb_stream_start(cam,
 935                                 cam->params.camera_state.stream_mode);
 936                 if (!ret)
 937                         v4l2_ctrl_grab(cam->usb_alt, true);
 938         }
 939         return ret;
 940 }
 941 
 942 static int cpia2_streamoff(struct file *file, void *fh, enum v4l2_buf_type type)
 943 {
 944         struct camera_data *cam = video_drvdata(file);
 945         int ret = -EINVAL;
 946 
 947         DBG("VIDIOC_STREAMOFF, streaming=%d\n", cam->streaming);
 948         if (!cam->mmapped || type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 949                 return -EINVAL;
 950 
 951         if (cam->streaming) {
 952                 ret = cpia2_usb_stream_stop(cam);
 953                 if (!ret)
 954                         v4l2_ctrl_grab(cam->usb_alt, false);
 955         }
 956         return ret;
 957 }
 958 
 959 /******************************************************************************
 960  *
 961  *  cpia2_mmap
 962  *
 963  *****************************************************************************/
 964 static int cpia2_mmap(struct file *file, struct vm_area_struct *area)
 965 {
 966         struct camera_data *cam = video_drvdata(file);
 967         int retval;
 968 
 969         if (mutex_lock_interruptible(&cam->v4l2_lock))
 970                 return -ERESTARTSYS;
 971         retval = cpia2_remap_buffer(cam, area);
 972 
 973         if(!retval)
 974                 cam->stream_fh = file->private_data;
 975         mutex_unlock(&cam->v4l2_lock);
 976         return retval;
 977 }
 978 
 979 /******************************************************************************
 980  *
 981  *  reset_camera_struct_v4l
 982  *
 983  *  Sets all values to the defaults
 984  *****************************************************************************/
 985 static void reset_camera_struct_v4l(struct camera_data *cam)
 986 {
 987         cam->width = cam->params.roi.width;
 988         cam->height = cam->params.roi.height;
 989 
 990         cam->frame_size = buffer_size;
 991         cam->num_frames = num_buffers;
 992 
 993         /* Flicker modes */
 994         cam->params.flicker_control.flicker_mode_req = flicker_mode;
 995 
 996         /* stream modes */
 997         cam->params.camera_state.stream_mode = alternate;
 998 
 999         cam->pixelformat = V4L2_PIX_FMT_JPEG;
1000 }
1001 
1002 static const struct v4l2_ioctl_ops cpia2_ioctl_ops = {
1003         .vidioc_querycap                    = cpia2_querycap,
1004         .vidioc_enum_input                  = cpia2_enum_input,
1005         .vidioc_g_input                     = cpia2_g_input,
1006         .vidioc_s_input                     = cpia2_s_input,
1007         .vidioc_enum_fmt_vid_cap            = cpia2_enum_fmt_vid_cap,
1008         .vidioc_g_fmt_vid_cap               = cpia2_g_fmt_vid_cap,
1009         .vidioc_s_fmt_vid_cap               = cpia2_s_fmt_vid_cap,
1010         .vidioc_try_fmt_vid_cap             = cpia2_try_fmt_vid_cap,
1011         .vidioc_g_jpegcomp                  = cpia2_g_jpegcomp,
1012         .vidioc_s_jpegcomp                  = cpia2_s_jpegcomp,
1013         .vidioc_g_selection                 = cpia2_g_selection,
1014         .vidioc_reqbufs                     = cpia2_reqbufs,
1015         .vidioc_querybuf                    = cpia2_querybuf,
1016         .vidioc_qbuf                        = cpia2_qbuf,
1017         .vidioc_dqbuf                       = cpia2_dqbuf,
1018         .vidioc_streamon                    = cpia2_streamon,
1019         .vidioc_streamoff                   = cpia2_streamoff,
1020         .vidioc_s_parm                      = cpia2_s_parm,
1021         .vidioc_g_parm                      = cpia2_g_parm,
1022         .vidioc_enum_framesizes             = cpia2_enum_framesizes,
1023         .vidioc_enum_frameintervals         = cpia2_enum_frameintervals,
1024         .vidioc_subscribe_event             = v4l2_ctrl_subscribe_event,
1025         .vidioc_unsubscribe_event           = v4l2_event_unsubscribe,
1026 };
1027 
1028 /***
1029  * The v4l video device structure initialized for this device
1030  ***/
1031 static const struct v4l2_file_operations cpia2_fops = {
1032         .owner          = THIS_MODULE,
1033         .open           = cpia2_open,
1034         .release        = cpia2_close,
1035         .read           = cpia2_v4l_read,
1036         .poll           = cpia2_v4l_poll,
1037         .unlocked_ioctl = video_ioctl2,
1038         .mmap           = cpia2_mmap,
1039 };
1040 
1041 static const struct video_device cpia2_template = {
1042         /* I could not find any place for the old .initialize initializer?? */
1043         .name =         "CPiA2 Camera",
1044         .fops =         &cpia2_fops,
1045         .ioctl_ops =    &cpia2_ioctl_ops,
1046         .release =      video_device_release_empty,
1047 };
1048 
1049 void cpia2_camera_release(struct v4l2_device *v4l2_dev)
1050 {
1051         struct camera_data *cam =
1052                 container_of(v4l2_dev, struct camera_data, v4l2_dev);
1053 
1054         v4l2_ctrl_handler_free(&cam->hdl);
1055         v4l2_device_unregister(&cam->v4l2_dev);
1056         kfree(cam);
1057 }
1058 
1059 static const struct v4l2_ctrl_ops cpia2_ctrl_ops = {
1060         .s_ctrl = cpia2_s_ctrl,
1061 };
1062 
1063 /******************************************************************************
1064  *
1065  *  cpia2_register_camera
1066  *
1067  *****************************************************************************/
1068 int cpia2_register_camera(struct camera_data *cam)
1069 {
1070         struct v4l2_ctrl_handler *hdl = &cam->hdl;
1071         struct v4l2_ctrl_config cpia2_usb_alt = {
1072                 .ops = &cpia2_ctrl_ops,
1073                 .id = CPIA2_CID_USB_ALT,
1074                 .name = "USB Alternate",
1075                 .type = V4L2_CTRL_TYPE_INTEGER,
1076                 .min = USBIF_ISO_1,
1077                 .max = USBIF_ISO_6,
1078                 .step = 1,
1079         };
1080         int ret;
1081 
1082         v4l2_ctrl_handler_init(hdl, 12);
1083         v4l2_ctrl_new_std(hdl, &cpia2_ctrl_ops,
1084                         V4L2_CID_BRIGHTNESS,
1085                         cam->params.pnp_id.device_type == DEVICE_STV_672 ? 1 : 0,
1086                         255, 1, DEFAULT_BRIGHTNESS);
1087         v4l2_ctrl_new_std(hdl, &cpia2_ctrl_ops,
1088                         V4L2_CID_CONTRAST, 0, 255, 1, DEFAULT_CONTRAST);
1089         v4l2_ctrl_new_std(hdl, &cpia2_ctrl_ops,
1090                         V4L2_CID_SATURATION, 0, 255, 1, DEFAULT_SATURATION);
1091         v4l2_ctrl_new_std(hdl, &cpia2_ctrl_ops,
1092                         V4L2_CID_HFLIP, 0, 1, 1, 0);
1093         v4l2_ctrl_new_std(hdl, &cpia2_ctrl_ops,
1094                         V4L2_CID_JPEG_ACTIVE_MARKER, 0,
1095                         V4L2_JPEG_ACTIVE_MARKER_DHT, 0,
1096                         V4L2_JPEG_ACTIVE_MARKER_DHT);
1097         v4l2_ctrl_new_std(hdl, &cpia2_ctrl_ops,
1098                         V4L2_CID_JPEG_COMPRESSION_QUALITY, 1,
1099                         100, 1, 100);
1100         cpia2_usb_alt.def = alternate;
1101         cam->usb_alt = v4l2_ctrl_new_custom(hdl, &cpia2_usb_alt, NULL);
1102         /* VP5 Only */
1103         if (cam->params.pnp_id.device_type != DEVICE_STV_672)
1104                 v4l2_ctrl_new_std(hdl, &cpia2_ctrl_ops,
1105                         V4L2_CID_VFLIP, 0, 1, 1, 0);
1106         /* Flicker control only valid for 672 */
1107         if (cam->params.pnp_id.device_type == DEVICE_STV_672)
1108                 v4l2_ctrl_new_std_menu(hdl, &cpia2_ctrl_ops,
1109                         V4L2_CID_POWER_LINE_FREQUENCY,
1110                         V4L2_CID_POWER_LINE_FREQUENCY_60HZ, 0, 0);
1111         /* Light control only valid for the QX5 Microscope */
1112         if (cam->params.pnp_id.product == 0x151) {
1113                 cam->top_light = v4l2_ctrl_new_std(hdl, &cpia2_ctrl_ops,
1114                                 V4L2_CID_ILLUMINATORS_1, 0, 1, 1, 0);
1115                 cam->bottom_light = v4l2_ctrl_new_std(hdl, &cpia2_ctrl_ops,
1116                                 V4L2_CID_ILLUMINATORS_2, 0, 1, 1, 0);
1117                 v4l2_ctrl_cluster(2, &cam->top_light);
1118         }
1119 
1120         if (hdl->error) {
1121                 ret = hdl->error;
1122                 v4l2_ctrl_handler_free(hdl);
1123                 return ret;
1124         }
1125 
1126         cam->vdev = cpia2_template;
1127         video_set_drvdata(&cam->vdev, cam);
1128         cam->vdev.lock = &cam->v4l2_lock;
1129         cam->vdev.ctrl_handler = hdl;
1130         cam->vdev.v4l2_dev = &cam->v4l2_dev;
1131         cam->vdev.device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
1132                                 V4L2_CAP_STREAMING;
1133 
1134         reset_camera_struct_v4l(cam);
1135 
1136         /* register v4l device */
1137         if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
1138                 ERR("video_register_device failed\n");
1139                 return -ENODEV;
1140         }
1141 
1142         return 0;
1143 }
1144 
1145 /******************************************************************************
1146  *
1147  *  cpia2_unregister_camera
1148  *
1149  *****************************************************************************/
1150 void cpia2_unregister_camera(struct camera_data *cam)
1151 {
1152         video_unregister_device(&cam->vdev);
1153 }
1154 
1155 /******************************************************************************
1156  *
1157  *  check_parameters
1158  *
1159  *  Make sure that all user-supplied parameters are sensible
1160  *****************************************************************************/
1161 static void __init check_parameters(void)
1162 {
1163         if(buffer_size < PAGE_SIZE) {
1164                 buffer_size = PAGE_SIZE;
1165                 LOG("buffer_size too small, setting to %d\n", buffer_size);
1166         } else if(buffer_size > 1024*1024) {
1167                 /* arbitrary upper limiit */
1168                 buffer_size = 1024*1024;
1169                 LOG("buffer_size ridiculously large, setting to %d\n",
1170                     buffer_size);
1171         } else {
1172                 buffer_size += PAGE_SIZE-1;
1173                 buffer_size &= ~(PAGE_SIZE-1);
1174         }
1175 
1176         if(num_buffers < 1) {
1177                 num_buffers = 1;
1178                 LOG("num_buffers too small, setting to %d\n", num_buffers);
1179         } else if(num_buffers > VIDEO_MAX_FRAME) {
1180                 num_buffers = VIDEO_MAX_FRAME;
1181                 LOG("num_buffers too large, setting to %d\n", num_buffers);
1182         }
1183 
1184         if(alternate < USBIF_ISO_1 || alternate > USBIF_ISO_6) {
1185                 alternate = DEFAULT_ALT;
1186                 LOG("alternate specified is invalid, using %d\n", alternate);
1187         }
1188 
1189         if (flicker_mode != 0 && flicker_mode != FLICKER_50 && flicker_mode != FLICKER_60) {
1190                 flicker_mode = 0;
1191                 LOG("Flicker mode specified is invalid, using %d\n",
1192                     flicker_mode);
1193         }
1194 
1195         DBG("Using %d buffers, each %d bytes, alternate=%d\n",
1196             num_buffers, buffer_size, alternate);
1197 }
1198 
1199 /************   Module Stuff ***************/
1200 
1201 
1202 /******************************************************************************
1203  *
1204  * cpia2_init/module_init
1205  *
1206  *****************************************************************************/
1207 static int __init cpia2_init(void)
1208 {
1209         LOG("%s v%s\n",
1210             ABOUT, CPIA_VERSION);
1211         check_parameters();
1212         return cpia2_usb_init();
1213 }
1214 
1215 
1216 /******************************************************************************
1217  *
1218  * cpia2_exit/module_exit
1219  *
1220  *****************************************************************************/
1221 static void __exit cpia2_exit(void)
1222 {
1223         cpia2_usb_cleanup();
1224         schedule_timeout(2 * HZ);
1225 }
1226 
1227 module_init(cpia2_init);
1228 module_exit(cpia2_exit);

/* [<][>][^][v][top][bottom][index][help] */