drivers/media/radio/radio-gemtek.c

/* [<][>][^][v][top][bottom][index][help] */
This source file includes following definitions.
gemtek_bu2614_transmit
gemtek_convfreq
gemtek_alloc
gemtek_s_frequency
gemtek_s_mute_volume
gemtek_g_rxsubchans
gemtek_probe
gemtek_init
gemtek_exit
   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * GemTek radio card driver
   4  *
   5  * Copyright 1998 Jonas Munsin <jmunsin@iki.fi>
   6  *
   7  * GemTek hasn't released any specs on the card, so the protocol had to
   8  * be reverse engineered with dosemu.
   9  *
  10  * Besides the protocol changes, this is mostly a copy of:
  11  *
  12  *    RadioTrack II driver for Linux radio support (C) 1998 Ben Pfaff
  13  *
  14  *    Based on RadioTrack I/RadioReveal (C) 1997 M. Kirkwood
  15  *    Converted to new API by Alan Cox <alan@lxorguk.ukuu.org.uk>
  16  *    Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org>
  17  *
  18  * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@cisco.com>
  19  * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@kernel.org>
  20  *
  21  * Note: this card seems to swap the left and right audio channels!
  22  *
  23  * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool.
  24  */
  25 
  26 #include <linux/module.h>       /* Modules                      */
  27 #include <linux/init.h>         /* Initdata                     */
  28 #include <linux/ioport.h>       /* request_region               */
  29 #include <linux/delay.h>        /* udelay                       */
  30 #include <linux/videodev2.h>    /* kernel radio structs         */
  31 #include <linux/mutex.h>
  32 #include <linux/io.h>           /* outb, outb_p                 */
  33 #include <linux/pnp.h>
  34 #include <linux/slab.h>
  35 #include <media/v4l2-ioctl.h>
  36 #include <media/v4l2-device.h>
  37 #include "radio-isa.h"
  38 
  39 /*
  40  * Module info.
  41  */
  42 
  43 MODULE_AUTHOR("Jonas Munsin, Pekka Seppänen <pexu@kapsi.fi>");
  44 MODULE_DESCRIPTION("A driver for the GemTek Radio card.");
  45 MODULE_LICENSE("GPL");
  46 MODULE_VERSION("1.0.0");
  47 
  48 /*
  49  * Module params.
  50  */
  51 
  52 #ifndef CONFIG_RADIO_GEMTEK_PORT
  53 #define CONFIG_RADIO_GEMTEK_PORT -1
  54 #endif
  55 #ifndef CONFIG_RADIO_GEMTEK_PROBE
  56 #define CONFIG_RADIO_GEMTEK_PROBE 1
  57 #endif
  58 
  59 #define GEMTEK_MAX 4
  60 
  61 static bool probe = CONFIG_RADIO_GEMTEK_PROBE;
  62 static bool hardmute;
  63 static int io[GEMTEK_MAX] = { [0] = CONFIG_RADIO_GEMTEK_PORT,
  64                               [1 ... (GEMTEK_MAX - 1)] = -1 };
  65 static int radio_nr[GEMTEK_MAX] = { [0 ... (GEMTEK_MAX - 1)] = -1 };
  66 
  67 module_param(probe, bool, 0444);
  68 MODULE_PARM_DESC(probe, "Enable automatic device probing.");
  69 
  70 module_param(hardmute, bool, 0644);
  71 MODULE_PARM_DESC(hardmute, "Enable 'hard muting' by shutting down PLL, may reduce static noise.");
  72 
  73 module_param_array(io, int, NULL, 0444);
  74 MODULE_PARM_DESC(io, "Force I/O ports for the GemTek Radio card if automatic probing is disabled or fails. The most common I/O ports are: 0x20c 0x30c, 0x24c or 0x34c (0x20c, 0x248 and 0x28c have been reported to work for the combined sound/radiocard).");
  75 
  76 module_param_array(radio_nr, int, NULL, 0444);
  77 MODULE_PARM_DESC(radio_nr, "Radio device numbers");
  78 
  79 /*
  80  * Frequency calculation constants.  Intermediate frequency 10.52 MHz (nominal
  81  * value 10.7 MHz), reference divisor 6.39 kHz (nominal 6.25 kHz).
  82  */
  83 #define FSCALE          8
  84 #define IF_OFFSET       ((unsigned int)(10.52 * 16000 * (1<<FSCALE)))
  85 #define REF_FREQ        ((unsigned int)(6.39 * 16 * (1<<FSCALE)))
  86 
  87 #define GEMTEK_CK               0x01    /* Clock signal                 */
  88 #define GEMTEK_DA               0x02    /* Serial data                  */
  89 #define GEMTEK_CE               0x04    /* Chip enable                  */
  90 #define GEMTEK_NS               0x08    /* No signal                    */
  91 #define GEMTEK_MT               0x10    /* Line mute                    */
  92 #define GEMTEK_STDF_3_125_KHZ   0x01    /* Standard frequency 3.125 kHz */
  93 #define GEMTEK_PLL_OFF          0x07    /* PLL off                      */
  94 
  95 #define BU2614_BUS_SIZE 32      /* BU2614 / BU2614FS bus size           */
  96 
  97 #define SHORT_DELAY 5           /* usec */
  98 #define LONG_DELAY 75           /* usec */
  99 
 100 struct gemtek {
 101         struct radio_isa_card isa;
 102         bool muted;
 103         u32 bu2614data;
 104 };
 105 
 106 #define BU2614_FREQ_BITS        16 /* D0..D15, Frequency data           */
 107 #define BU2614_PORT_BITS        3 /* P0..P2, Output port control data   */
 108 #define BU2614_VOID_BITS        4 /* unused                             */
 109 #define BU2614_FMES_BITS        1 /* CT, Frequency measurement beginning data */
 110 #define BU2614_STDF_BITS        3 /* R0..R2, Standard frequency data    */
 111 #define BU2614_SWIN_BITS        1 /* S, Switch between FMIN / AMIN      */
 112 #define BU2614_SWAL_BITS        1 /* PS, Swallow counter division (AMIN only)*/
 113 #define BU2614_VOID2_BITS       1 /* unused                             */
 114 #define BU2614_FMUN_BITS        1 /* GT, Frequency measurement time & unlock */
 115 #define BU2614_TEST_BITS        1 /* TS, Test data is input             */
 116 
 117 #define BU2614_FREQ_SHIFT       0
 118 #define BU2614_PORT_SHIFT       (BU2614_FREQ_BITS + BU2614_FREQ_SHIFT)
 119 #define BU2614_VOID_SHIFT       (BU2614_PORT_BITS + BU2614_PORT_SHIFT)
 120 #define BU2614_FMES_SHIFT       (BU2614_VOID_BITS + BU2614_VOID_SHIFT)
 121 #define BU2614_STDF_SHIFT       (BU2614_FMES_BITS + BU2614_FMES_SHIFT)
 122 #define BU2614_SWIN_SHIFT       (BU2614_STDF_BITS + BU2614_STDF_SHIFT)
 123 #define BU2614_SWAL_SHIFT       (BU2614_SWIN_BITS + BU2614_SWIN_SHIFT)
 124 #define BU2614_VOID2_SHIFT      (BU2614_SWAL_BITS + BU2614_SWAL_SHIFT)
 125 #define BU2614_FMUN_SHIFT       (BU2614_VOID2_BITS + BU2614_VOID2_SHIFT)
 126 #define BU2614_TEST_SHIFT       (BU2614_FMUN_BITS + BU2614_FMUN_SHIFT)
 127 
 128 #define MKMASK(field)   (((1UL<<BU2614_##field##_BITS) - 1) << \
 129                         BU2614_##field##_SHIFT)
 130 #define BU2614_PORT_MASK        MKMASK(PORT)
 131 #define BU2614_FREQ_MASK        MKMASK(FREQ)
 132 #define BU2614_VOID_MASK        MKMASK(VOID)
 133 #define BU2614_FMES_MASK        MKMASK(FMES)
 134 #define BU2614_STDF_MASK        MKMASK(STDF)
 135 #define BU2614_SWIN_MASK        MKMASK(SWIN)
 136 #define BU2614_SWAL_MASK        MKMASK(SWAL)
 137 #define BU2614_VOID2_MASK       MKMASK(VOID2)
 138 #define BU2614_FMUN_MASK        MKMASK(FMUN)
 139 #define BU2614_TEST_MASK        MKMASK(TEST)
 140 
 141 /*
 142  * Set data which will be sent to BU2614FS.
 143  */
 144 #define gemtek_bu2614_set(dev, field, data) ((dev)->bu2614data = \
 145         ((dev)->bu2614data & ~field##_MASK) | ((data) << field##_SHIFT))
 146 
 147 /*
 148  * Transmit settings to BU2614FS over GemTek IC.
 149  */
 150 static void gemtek_bu2614_transmit(struct gemtek *gt)
 151 {
 152         struct radio_isa_card *isa = &gt->isa;
 153         int i, bit, q, mute;
 154 
 155         mute = gt->muted ? GEMTEK_MT : 0x00;
 156 
 157         outb_p(mute | GEMTEK_CE | GEMTEK_DA | GEMTEK_CK, isa->io);
 158         udelay(LONG_DELAY);
 159 
 160         for (i = 0, q = gt->bu2614data; i < 32; i++, q >>= 1) {
 161                 bit = (q & 1) ? GEMTEK_DA : 0;
 162                 outb_p(mute | GEMTEK_CE | bit, isa->io);
 163                 udelay(SHORT_DELAY);
 164                 outb_p(mute | GEMTEK_CE | bit | GEMTEK_CK, isa->io);
 165                 udelay(SHORT_DELAY);
 166         }
 167 
 168         outb_p(mute | GEMTEK_DA | GEMTEK_CK, isa->io);
 169         udelay(SHORT_DELAY);
 170 }
 171 
 172 /*
 173  * Calculate divisor from FM-frequency for BU2614FS (3.125 KHz STDF expected).
 174  */
 175 static unsigned long gemtek_convfreq(unsigned long freq)
 176 {
 177         return ((freq << FSCALE) + IF_OFFSET + REF_FREQ / 2) / REF_FREQ;
 178 }
 179 
 180 static struct radio_isa_card *gemtek_alloc(void)
 181 {
 182         struct gemtek *gt = kzalloc(sizeof(*gt), GFP_KERNEL);
 183 
 184         if (gt)
 185                 gt->muted = true;
 186         return gt ? &gt->isa : NULL;
 187 }
 188 
 189 /*
 190  * Set FM-frequency.
 191  */
 192 static int gemtek_s_frequency(struct radio_isa_card *isa, u32 freq)
 193 {
 194         struct gemtek *gt = container_of(isa, struct gemtek, isa);
 195 
 196         if (hardmute && gt->muted)
 197                 return 0;
 198 
 199         gemtek_bu2614_set(gt, BU2614_PORT, 0);
 200         gemtek_bu2614_set(gt, BU2614_FMES, 0);
 201         gemtek_bu2614_set(gt, BU2614_SWIN, 0);  /* FM-mode      */
 202         gemtek_bu2614_set(gt, BU2614_SWAL, 0);
 203         gemtek_bu2614_set(gt, BU2614_FMUN, 1);  /* GT bit set   */
 204         gemtek_bu2614_set(gt, BU2614_TEST, 0);
 205         gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_STDF_3_125_KHZ);
 206         gemtek_bu2614_set(gt, BU2614_FREQ, gemtek_convfreq(freq));
 207         gemtek_bu2614_transmit(gt);
 208         return 0;
 209 }
 210 
 211 /*
 212  * Set mute flag.
 213  */
 214 static int gemtek_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol)
 215 {
 216         struct gemtek *gt = container_of(isa, struct gemtek, isa);
 217         int i;
 218 
 219         gt->muted = mute;
 220         if (hardmute) {
 221                 if (!mute)
 222                         return gemtek_s_frequency(isa, isa->freq);
 223 
 224                 /* Turn off PLL, disable data output */
 225                 gemtek_bu2614_set(gt, BU2614_PORT, 0);
 226                 gemtek_bu2614_set(gt, BU2614_FMES, 0);  /* CT bit off   */
 227                 gemtek_bu2614_set(gt, BU2614_SWIN, 0);  /* FM-mode      */
 228                 gemtek_bu2614_set(gt, BU2614_SWAL, 0);
 229                 gemtek_bu2614_set(gt, BU2614_FMUN, 0);  /* GT bit off   */
 230                 gemtek_bu2614_set(gt, BU2614_TEST, 0);
 231                 gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_PLL_OFF);
 232                 gemtek_bu2614_set(gt, BU2614_FREQ, 0);
 233                 gemtek_bu2614_transmit(gt);
 234                 return 0;
 235         }
 236 
 237         /* Read bus contents (CE, CK and DA). */
 238         i = inb_p(isa->io);
 239         /* Write it back with mute flag set. */
 240         outb_p((i >> 5) | (mute ? GEMTEK_MT : 0), isa->io);
 241         udelay(SHORT_DELAY);
 242         return 0;
 243 }
 244 
 245 static u32 gemtek_g_rxsubchans(struct radio_isa_card *isa)
 246 {
 247         if (inb_p(isa->io) & GEMTEK_NS)
 248                 return V4L2_TUNER_SUB_MONO;
 249         return V4L2_TUNER_SUB_STEREO;
 250 }
 251 
 252 /*
 253  * Check if requested card acts like GemTek Radio card.
 254  */
 255 static bool gemtek_probe(struct radio_isa_card *isa, int io)
 256 {
 257         int i, q;
 258 
 259         q = inb_p(io);  /* Read bus contents before probing. */
 260         /* Try to turn on CE, CK and DA respectively and check if card responds
 261            properly. */
 262         for (i = 0; i < 3; ++i) {
 263                 outb_p(1 << i, io);
 264                 udelay(SHORT_DELAY);
 265 
 266                 if ((inb_p(io) & ~GEMTEK_NS) != (0x17 | (1 << (i + 5))))
 267                         return false;
 268         }
 269         outb_p(q >> 5, io);     /* Write bus contents back. */
 270         udelay(SHORT_DELAY);
 271         return true;
 272 }
 273 
 274 static const struct radio_isa_ops gemtek_ops = {
 275         .alloc = gemtek_alloc,
 276         .probe = gemtek_probe,
 277         .s_mute_volume = gemtek_s_mute_volume,
 278         .s_frequency = gemtek_s_frequency,
 279         .g_rxsubchans = gemtek_g_rxsubchans,
 280 };
 281 
 282 static const int gemtek_ioports[] = { 0x20c, 0x30c, 0x24c, 0x34c, 0x248, 0x28c };
 283 
 284 #ifdef CONFIG_PNP
 285 static const struct pnp_device_id gemtek_pnp_devices[] = {
 286         /* AOpen FX-3D/Pro Radio */
 287         {.id = "ADS7183", .driver_data = 0},
 288         {.id = ""}
 289 };
 290 
 291 MODULE_DEVICE_TABLE(pnp, gemtek_pnp_devices);
 292 #endif
 293 
 294 static struct radio_isa_driver gemtek_driver = {
 295         .driver = {
 296                 .match          = radio_isa_match,
 297                 .probe          = radio_isa_probe,
 298                 .remove         = radio_isa_remove,
 299                 .driver         = {
 300                         .name   = "radio-gemtek",
 301                 },
 302         },
 303 #ifdef CONFIG_PNP
 304         .pnp_driver = {
 305                 .name           = "radio-gemtek",
 306                 .id_table       = gemtek_pnp_devices,
 307                 .probe          = radio_isa_pnp_probe,
 308                 .remove         = radio_isa_pnp_remove,
 309         },
 310 #endif
 311         .io_params = io,
 312         .radio_nr_params = radio_nr,
 313         .io_ports = gemtek_ioports,
 314         .num_of_io_ports = ARRAY_SIZE(gemtek_ioports),
 315         .region_size = 1,
 316         .card = "GemTek Radio",
 317         .ops = &gemtek_ops,
 318         .has_stereo = true,
 319 };
 320 
 321 static int __init gemtek_init(void)
 322 {
 323         gemtek_driver.probe = probe;
 324 #ifdef CONFIG_PNP
 325         pnp_register_driver(&gemtek_driver.pnp_driver);
 326 #endif
 327         return isa_register_driver(&gemtek_driver.driver, GEMTEK_MAX);
 328 }
 329 
 330 static void __exit gemtek_exit(void)
 331 {
 332         hardmute = true;        /* Turn off PLL */
 333 #ifdef CONFIG_PNP
 334         pnp_unregister_driver(&gemtek_driver.pnp_driver);
 335 #endif
 336         isa_unregister_driver(&gemtek_driver.driver);
 337 }
 338 
 339 module_init(gemtek_init);
 340 module_exit(gemtek_exit);
/* [<][>][^][v][top][bottom][index][help] */
root/drivers/media/radio/radio-gemtek.c

DEFINITIONS
