root/drivers/bluetooth/dtl1_cs.c

DEFINITIONS

1. dtl1_write
2. dtl1_write_wakeup
3. dtl1_control
4. dtl1_receive
5. dtl1_interrupt
6. dtl1_hci_open
7. dtl1_hci_flush
8. dtl1_hci_close
9. dtl1_hci_send_frame
10. dtl1_open
11. dtl1_close
12. dtl1_probe
13. dtl1_detach
14. dtl1_confcheck
15. dtl1_config

   1 /*
   2  *
   3  *  A driver for Nokia Connectivity Card DTL-1 devices
   4  *
   5  *  Copyright (C) 2001-2002  Marcel Holtmann <marcel@holtmann.org>
   6  *
   7  *
   8  *  This program is free software; you can redistribute it and/or modify
   9  *  it under the terms of the GNU General Public License version 2 as
  10  *  published by the Free Software Foundation;
  11  *
  12  *  Software distributed under the License is distributed on an "AS
  13  *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
  14  *  implied. See the License for the specific language governing
  15  *  rights and limitations under the License.
  16  *
  17  *  The initial developer of the original code is David A. Hinds
  18  *  <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
  19  *  are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
  20  *
  21  */
  22 
  23 #include <linux/module.h>
  24 
  25 #include <linux/kernel.h>
  26 #include <linux/init.h>
  27 #include <linux/slab.h>
  28 #include <linux/types.h>
  29 #include <linux/delay.h>
  30 #include <linux/errno.h>
  31 #include <linux/ptrace.h>
  32 #include <linux/ioport.h>
  33 #include <linux/spinlock.h>
  34 #include <linux/moduleparam.h>
  35 
  36 #include <linux/skbuff.h>
  37 #include <linux/string.h>
  38 #include <linux/serial.h>
  39 #include <linux/serial_reg.h>
  40 #include <linux/bitops.h>
  41 #include <asm/io.h>
  42 
  43 #include <pcmcia/cistpl.h>
  44 #include <pcmcia/ciscode.h>
  45 #include <pcmcia/ds.h>
  46 #include <pcmcia/cisreg.h>
  47 
  48 #include <net/bluetooth/bluetooth.h>
  49 #include <net/bluetooth/hci_core.h>
  50 
  51 
  52 
  53 /* ======================== Module parameters ======================== */
  54 
  55 
  56 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
  57 MODULE_DESCRIPTION("Bluetooth driver for Nokia Connectivity Card DTL-1");
  58 MODULE_LICENSE("GPL");
  59 
  60 
  61 
  62 /* ======================== Local structures ======================== */
  63 
  64 
  65 struct dtl1_info {
  66         struct pcmcia_device *p_dev;
  67 
  68         struct hci_dev *hdev;
  69 
  70         spinlock_t lock;                /* For serializing operations */
  71 
  72         unsigned long flowmask;         /* HCI flow mask */
  73         int ri_latch;
  74 
  75         struct sk_buff_head txq;
  76         unsigned long tx_state;
  77 
  78         unsigned long rx_state;
  79         unsigned long rx_count;
  80         struct sk_buff *rx_skb;
  81 };
  82 
  83 
  84 static int dtl1_config(struct pcmcia_device *link);
  85 
  86 
  87 /* Transmit states  */
  88 #define XMIT_SENDING  1
  89 #define XMIT_WAKEUP   2
  90 #define XMIT_WAITING  8
  91 
  92 /* Receiver States */
  93 #define RECV_WAIT_NSH   0
  94 #define RECV_WAIT_DATA  1
  95 
  96 
  97 struct nsh {
  98         u8 type;
  99         u8 zero;
 100         u16 len;
 101 } __packed;     /* Nokia Specific Header */
 102 
 103 #define NSHL  4                         /* Nokia Specific Header Length */
 104 
 105 
 106 
 107 /* ======================== Interrupt handling ======================== */
 108 
 109 
 110 static int dtl1_write(unsigned int iobase, int fifo_size, __u8 *buf, int len)
 111 {
 112         int actual = 0;
 113 
 114         /* Tx FIFO should be empty */
 115         if (!(inb(iobase + UART_LSR) & UART_LSR_THRE))
 116                 return 0;
 117 
 118         /* Fill FIFO with current frame */
 119         while ((fifo_size-- > 0) && (actual < len)) {
 120                 /* Transmit next byte */
 121                 outb(buf[actual], iobase + UART_TX);
 122                 actual++;
 123         }
 124 
 125         return actual;
 126 }
 127 
 128 
 129 static void dtl1_write_wakeup(struct dtl1_info *info)
 130 {
 131         if (!info) {
 132                 BT_ERR("Unknown device");
 133                 return;
 134         }
 135 
 136         if (test_bit(XMIT_WAITING, &(info->tx_state))) {
 137                 set_bit(XMIT_WAKEUP, &(info->tx_state));
 138                 return;
 139         }
 140 
 141         if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) {
 142                 set_bit(XMIT_WAKEUP, &(info->tx_state));
 143                 return;
 144         }
 145 
 146         do {
 147                 unsigned int iobase = info->p_dev->resource[0]->start;
 148                 register struct sk_buff *skb;
 149                 int len;
 150 
 151                 clear_bit(XMIT_WAKEUP, &(info->tx_state));
 152 
 153                 if (!pcmcia_dev_present(info->p_dev))
 154                         return;
 155 
 156                 skb = skb_dequeue(&(info->txq));
 157                 if (!skb)
 158                         break;
 159 
 160                 /* Send frame */
 161                 len = dtl1_write(iobase, 32, skb->data, skb->len);
 162 
 163                 if (len == skb->len) {
 164                         set_bit(XMIT_WAITING, &(info->tx_state));
 165                         kfree_skb(skb);
 166                 } else {
 167                         skb_pull(skb, len);
 168                         skb_queue_head(&(info->txq), skb);
 169                 }
 170 
 171                 info->hdev->stat.byte_tx += len;
 172 
 173         } while (test_bit(XMIT_WAKEUP, &(info->tx_state)));
 174 
 175         clear_bit(XMIT_SENDING, &(info->tx_state));
 176 }
 177 
 178 
 179 static void dtl1_control(struct dtl1_info *info, struct sk_buff *skb)
 180 {
 181         u8 flowmask = *(u8 *)skb->data;
 182         int i;
 183 
 184         printk(KERN_INFO "Bluetooth: Nokia control data =");
 185         for (i = 0; i < skb->len; i++)
 186                 printk(" %02x", skb->data[i]);
 187 
 188         printk("\n");
 189 
 190         /* transition to active state */
 191         if (((info->flowmask & 0x07) == 0) && ((flowmask & 0x07) != 0)) {
 192                 clear_bit(XMIT_WAITING, &(info->tx_state));
 193                 dtl1_write_wakeup(info);
 194         }
 195 
 196         info->flowmask = flowmask;
 197 
 198         kfree_skb(skb);
 199 }
 200 
 201 
 202 static void dtl1_receive(struct dtl1_info *info)
 203 {
 204         unsigned int iobase;
 205         struct nsh *nsh;
 206         int boguscount = 0;
 207 
 208         if (!info) {
 209                 BT_ERR("Unknown device");
 210                 return;
 211         }
 212 
 213         iobase = info->p_dev->resource[0]->start;
 214 
 215         do {
 216                 info->hdev->stat.byte_rx++;
 217 
 218                 /* Allocate packet */
 219                 if (info->rx_skb == NULL) {
 220                         info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
 221                         if (!info->rx_skb) {
 222                                 BT_ERR("Can't allocate mem for new packet");
 223                                 info->rx_state = RECV_WAIT_NSH;
 224                                 info->rx_count = NSHL;
 225                                 return;
 226                         }
 227                 }
 228 
 229                 skb_put_u8(info->rx_skb, inb(iobase + UART_RX));
 230                 nsh = (struct nsh *)info->rx_skb->data;
 231 
 232                 info->rx_count--;
 233 
 234                 if (info->rx_count == 0) {
 235 
 236                         switch (info->rx_state) {
 237                         case RECV_WAIT_NSH:
 238                                 info->rx_state = RECV_WAIT_DATA;
 239                                 info->rx_count = nsh->len + (nsh->len & 0x0001);
 240                                 break;
 241                         case RECV_WAIT_DATA:
 242                                 hci_skb_pkt_type(info->rx_skb) = nsh->type;
 243 
 244                                 /* remove PAD byte if it exists */
 245                                 if (nsh->len & 0x0001) {
 246                                         info->rx_skb->tail--;
 247                                         info->rx_skb->len--;
 248                                 }
 249 
 250                                 /* remove NSH */
 251                                 skb_pull(info->rx_skb, NSHL);
 252 
 253                                 switch (hci_skb_pkt_type(info->rx_skb)) {
 254                                 case 0x80:
 255                                         /* control data for the Nokia Card */
 256                                         dtl1_control(info, info->rx_skb);
 257                                         break;
 258                                 case 0x82:
 259                                 case 0x83:
 260                                 case 0x84:
 261                                         /* send frame to the HCI layer */
 262                                         hci_skb_pkt_type(info->rx_skb) &= 0x0f;
 263                                         hci_recv_frame(info->hdev, info->rx_skb);
 264                                         break;
 265                                 default:
 266                                         /* unknown packet */
 267                                         BT_ERR("Unknown HCI packet with type 0x%02x received",
 268                                                hci_skb_pkt_type(info->rx_skb));
 269                                         kfree_skb(info->rx_skb);
 270                                         break;
 271                                 }
 272 
 273                                 info->rx_state = RECV_WAIT_NSH;
 274                                 info->rx_count = NSHL;
 275                                 info->rx_skb = NULL;
 276                                 break;
 277                         }
 278 
 279                 }
 280 
 281                 /* Make sure we don't stay here too long */
 282                 if (boguscount++ > 32)
 283                         break;
 284 
 285         } while (inb(iobase + UART_LSR) & UART_LSR_DR);
 286 }
 287 
 288 
 289 static irqreturn_t dtl1_interrupt(int irq, void *dev_inst)
 290 {
 291         struct dtl1_info *info = dev_inst;
 292         unsigned int iobase;
 293         unsigned char msr;
 294         int boguscount = 0;
 295         int iir, lsr;
 296         irqreturn_t r = IRQ_NONE;
 297 
 298         if (!info || !info->hdev)
 299                 /* our irq handler is shared */
 300                 return IRQ_NONE;
 301 
 302         iobase = info->p_dev->resource[0]->start;
 303 
 304         spin_lock(&(info->lock));
 305 
 306         iir = inb(iobase + UART_IIR) & UART_IIR_ID;
 307         while (iir) {
 308 
 309                 r = IRQ_HANDLED;
 310                 /* Clear interrupt */
 311                 lsr = inb(iobase + UART_LSR);
 312 
 313                 switch (iir) {
 314                 case UART_IIR_RLSI:
 315                         BT_ERR("RLSI");
 316                         break;
 317                 case UART_IIR_RDI:
 318                         /* Receive interrupt */
 319                         dtl1_receive(info);
 320                         break;
 321                 case UART_IIR_THRI:
 322                         if (lsr & UART_LSR_THRE) {
 323                                 /* Transmitter ready for data */
 324                                 dtl1_write_wakeup(info);
 325                         }
 326                         break;
 327                 default:
 328                         BT_ERR("Unhandled IIR=%#x", iir);
 329                         break;
 330                 }
 331 
 332                 /* Make sure we don't stay here too long */
 333                 if (boguscount++ > 100)
 334                         break;
 335 
 336                 iir = inb(iobase + UART_IIR) & UART_IIR_ID;
 337 
 338         }
 339 
 340         msr = inb(iobase + UART_MSR);
 341 
 342         if (info->ri_latch ^ (msr & UART_MSR_RI)) {
 343                 info->ri_latch = msr & UART_MSR_RI;
 344                 clear_bit(XMIT_WAITING, &(info->tx_state));
 345                 dtl1_write_wakeup(info);
 346                 r = IRQ_HANDLED;
 347         }
 348 
 349         spin_unlock(&(info->lock));
 350 
 351         return r;
 352 }
 353 
 354 
 355 
 356 /* ======================== HCI interface ======================== */
 357 
 358 
 359 static int dtl1_hci_open(struct hci_dev *hdev)
 360 {
 361         return 0;
 362 }
 363 
 364 
 365 static int dtl1_hci_flush(struct hci_dev *hdev)
 366 {
 367         struct dtl1_info *info = hci_get_drvdata(hdev);
 368 
 369         /* Drop TX queue */
 370         skb_queue_purge(&(info->txq));
 371 
 372         return 0;
 373 }
 374 
 375 
 376 static int dtl1_hci_close(struct hci_dev *hdev)
 377 {
 378         dtl1_hci_flush(hdev);
 379 
 380         return 0;
 381 }
 382 
 383 
 384 static int dtl1_hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
 385 {
 386         struct dtl1_info *info = hci_get_drvdata(hdev);
 387         struct sk_buff *s;
 388         struct nsh nsh;
 389 
 390         switch (hci_skb_pkt_type(skb)) {
 391         case HCI_COMMAND_PKT:
 392                 hdev->stat.cmd_tx++;
 393                 nsh.type = 0x81;
 394                 break;
 395         case HCI_ACLDATA_PKT:
 396                 hdev->stat.acl_tx++;
 397                 nsh.type = 0x82;
 398                 break;
 399         case HCI_SCODATA_PKT:
 400                 hdev->stat.sco_tx++;
 401                 nsh.type = 0x83;
 402                 break;
 403         default:
 404                 return -EILSEQ;
 405         }
 406 
 407         nsh.zero = 0;
 408         nsh.len = skb->len;
 409 
 410         s = bt_skb_alloc(NSHL + skb->len + 1, GFP_ATOMIC);
 411         if (!s)
 412                 return -ENOMEM;
 413 
 414         skb_reserve(s, NSHL);
 415         skb_copy_from_linear_data(skb, skb_put(s, skb->len), skb->len);
 416         if (skb->len & 0x0001)
 417                 skb_put_u8(s, 0);       /* PAD */
 418 
 419         /* Prepend skb with Nokia frame header and queue */
 420         memcpy(skb_push(s, NSHL), &nsh, NSHL);
 421         skb_queue_tail(&(info->txq), s);
 422 
 423         dtl1_write_wakeup(info);
 424 
 425         kfree_skb(skb);
 426 
 427         return 0;
 428 }
 429 
 430 
 431 
 432 /* ======================== Card services HCI interaction ======================== */
 433 
 434 
 435 static int dtl1_open(struct dtl1_info *info)
 436 {
 437         unsigned long flags;
 438         unsigned int iobase = info->p_dev->resource[0]->start;
 439         struct hci_dev *hdev;
 440 
 441         spin_lock_init(&(info->lock));
 442 
 443         skb_queue_head_init(&(info->txq));
 444 
 445         info->rx_state = RECV_WAIT_NSH;
 446         info->rx_count = NSHL;
 447         info->rx_skb = NULL;
 448 
 449         set_bit(XMIT_WAITING, &(info->tx_state));
 450 
 451         /* Initialize HCI device */
 452         hdev = hci_alloc_dev();
 453         if (!hdev) {
 454                 BT_ERR("Can't allocate HCI device");
 455                 return -ENOMEM;
 456         }
 457 
 458         info->hdev = hdev;
 459 
 460         hdev->bus = HCI_PCCARD;
 461         hci_set_drvdata(hdev, info);
 462         SET_HCIDEV_DEV(hdev, &info->p_dev->dev);
 463 
 464         hdev->open  = dtl1_hci_open;
 465         hdev->close = dtl1_hci_close;
 466         hdev->flush = dtl1_hci_flush;
 467         hdev->send  = dtl1_hci_send_frame;
 468 
 469         spin_lock_irqsave(&(info->lock), flags);
 470 
 471         /* Reset UART */
 472         outb(0, iobase + UART_MCR);
 473 
 474         /* Turn off interrupts */
 475         outb(0, iobase + UART_IER);
 476 
 477         /* Initialize UART */
 478         outb(UART_LCR_WLEN8, iobase + UART_LCR);        /* Reset DLAB */
 479         outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase + UART_MCR);
 480 
 481         info->ri_latch = inb(info->p_dev->resource[0]->start + UART_MSR)
 482                                 & UART_MSR_RI;
 483 
 484         /* Turn on interrupts */
 485         outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
 486 
 487         spin_unlock_irqrestore(&(info->lock), flags);
 488 
 489         /* Timeout before it is safe to send the first HCI packet */
 490         msleep(2000);
 491 
 492         /* Register HCI device */
 493         if (hci_register_dev(hdev) < 0) {
 494                 BT_ERR("Can't register HCI device");
 495                 info->hdev = NULL;
 496                 hci_free_dev(hdev);
 497                 return -ENODEV;
 498         }
 499 
 500         return 0;
 501 }
 502 
 503 
 504 static int dtl1_close(struct dtl1_info *info)
 505 {
 506         unsigned long flags;
 507         unsigned int iobase = info->p_dev->resource[0]->start;
 508         struct hci_dev *hdev = info->hdev;
 509 
 510         if (!hdev)
 511                 return -ENODEV;
 512 
 513         dtl1_hci_close(hdev);
 514 
 515         spin_lock_irqsave(&(info->lock), flags);
 516 
 517         /* Reset UART */
 518         outb(0, iobase + UART_MCR);
 519 
 520         /* Turn off interrupts */
 521         outb(0, iobase + UART_IER);
 522 
 523         spin_unlock_irqrestore(&(info->lock), flags);
 524 
 525         hci_unregister_dev(hdev);
 526         hci_free_dev(hdev);
 527 
 528         return 0;
 529 }
 530 
 531 static int dtl1_probe(struct pcmcia_device *link)
 532 {
 533         struct dtl1_info *info;
 534 
 535         /* Create new info device */
 536         info = devm_kzalloc(&link->dev, sizeof(*info), GFP_KERNEL);
 537         if (!info)
 538                 return -ENOMEM;
 539 
 540         info->p_dev = link;
 541         link->priv = info;
 542 
 543         link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
 544 
 545         return dtl1_config(link);
 546 }
 547 
 548 
 549 static void dtl1_detach(struct pcmcia_device *link)
 550 {
 551         struct dtl1_info *info = link->priv;
 552 
 553         dtl1_close(info);
 554         pcmcia_disable_device(link);
 555 }
 556 
 557 static int dtl1_confcheck(struct pcmcia_device *p_dev, void *priv_data)
 558 {
 559         if ((p_dev->resource[1]->end) || (p_dev->resource[1]->end < 8))
 560                 return -ENODEV;
 561 
 562         p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
 563         p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 564 
 565         return pcmcia_request_io(p_dev);
 566 }
 567 
 568 static int dtl1_config(struct pcmcia_device *link)
 569 {
 570         struct dtl1_info *info = link->priv;
 571         int ret;
 572 
 573         /* Look for a generic full-sized window */
 574         link->resource[0]->end = 8;
 575         ret = pcmcia_loop_config(link, dtl1_confcheck, NULL);
 576         if (ret)
 577                 goto failed;
 578 
 579         ret = pcmcia_request_irq(link, dtl1_interrupt);
 580         if (ret)
 581                 goto failed;
 582 
 583         ret = pcmcia_enable_device(link);
 584         if (ret)
 585                 goto failed;
 586 
 587         ret = dtl1_open(info);
 588         if (ret)
 589                 goto failed;
 590 
 591         return 0;
 592 
 593 failed:
 594         dtl1_detach(link);
 595         return ret;
 596 }
 597 
 598 static const struct pcmcia_device_id dtl1_ids[] = {
 599         PCMCIA_DEVICE_PROD_ID12("Nokia Mobile Phones", "DTL-1", 0xe1bfdd64, 0xe168480d),
 600         PCMCIA_DEVICE_PROD_ID12("Nokia Mobile Phones", "DTL-4", 0xe1bfdd64, 0x9102bc82),
 601         PCMCIA_DEVICE_PROD_ID12("Socket", "CF", 0xb38bcc2e, 0x44ebf863),
 602         PCMCIA_DEVICE_PROD_ID12("Socket", "CF+ Personal Network Card", 0xb38bcc2e, 0xe732bae3),
 603         PCMCIA_DEVICE_NULL
 604 };
 605 MODULE_DEVICE_TABLE(pcmcia, dtl1_ids);
 606 
 607 static struct pcmcia_driver dtl1_driver = {
 608         .owner          = THIS_MODULE,
 609         .name           = "dtl1_cs",
 610         .probe          = dtl1_probe,
 611         .remove         = dtl1_detach,
 612         .id_table       = dtl1_ids,
 613 };
 614 module_pcmcia_driver(dtl1_driver);