drivers/bluetooth/hci

/* [<][>][^][v][top][bottom][index][help] */
This source file includes following definitions.
ag6xx_open
ag6xx_close
ag6xx_flush
ag6xx_dequeue
ag6xx_enqueue
ag6xx_recv
intel_mem_write
ag6xx_setup
ag6xx_init
ag6xx_deinit
   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  *
   4  *  Bluetooth HCI UART driver for Intel/AG6xx devices
   5  *
   6  *  Copyright (C) 2016  Intel Corporation
   7  */
   8 
   9 #include <linux/kernel.h>
  10 #include <linux/errno.h>
  11 #include <linux/skbuff.h>
  12 #include <linux/firmware.h>
  13 #include <linux/module.h>
  14 #include <linux/tty.h>
  15 
  16 #include <net/bluetooth/bluetooth.h>
  17 #include <net/bluetooth/hci_core.h>
  18 
  19 #include "hci_uart.h"
  20 #include "btintel.h"
  21 
  22 struct ag6xx_data {
  23         struct sk_buff *rx_skb;
  24         struct sk_buff_head txq;
  25 };
  26 
  27 struct pbn_entry {
  28         __le32 addr;
  29         __le32 plen;
  30         __u8 data[0];
  31 } __packed;
  32 
  33 static int ag6xx_open(struct hci_uart *hu)
  34 {
  35         struct ag6xx_data *ag6xx;
  36 
  37         BT_DBG("hu %p", hu);
  38 
  39         ag6xx = kzalloc(sizeof(*ag6xx), GFP_KERNEL);
  40         if (!ag6xx)
  41                 return -ENOMEM;
  42 
  43         skb_queue_head_init(&ag6xx->txq);
  44 
  45         hu->priv = ag6xx;
  46         return 0;
  47 }
  48 
  49 static int ag6xx_close(struct hci_uart *hu)
  50 {
  51         struct ag6xx_data *ag6xx = hu->priv;
  52 
  53         BT_DBG("hu %p", hu);
  54 
  55         skb_queue_purge(&ag6xx->txq);
  56         kfree_skb(ag6xx->rx_skb);
  57         kfree(ag6xx);
  58 
  59         hu->priv = NULL;
  60         return 0;
  61 }
  62 
  63 static int ag6xx_flush(struct hci_uart *hu)
  64 {
  65         struct ag6xx_data *ag6xx = hu->priv;
  66 
  67         BT_DBG("hu %p", hu);
  68 
  69         skb_queue_purge(&ag6xx->txq);
  70         return 0;
  71 }
  72 
  73 static struct sk_buff *ag6xx_dequeue(struct hci_uart *hu)
  74 {
  75         struct ag6xx_data *ag6xx = hu->priv;
  76         struct sk_buff *skb;
  77 
  78         skb = skb_dequeue(&ag6xx->txq);
  79         if (!skb)
  80                 return skb;
  81 
  82         /* Prepend skb with frame type */
  83         memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
  84         return skb;
  85 }
  86 
  87 static int ag6xx_enqueue(struct hci_uart *hu, struct sk_buff *skb)
  88 {
  89         struct ag6xx_data *ag6xx = hu->priv;
  90 
  91         skb_queue_tail(&ag6xx->txq, skb);
  92         return 0;
  93 }
  94 
  95 static const struct h4_recv_pkt ag6xx_recv_pkts[] = {
  96         { H4_RECV_ACL,    .recv = hci_recv_frame   },
  97         { H4_RECV_SCO,    .recv = hci_recv_frame   },
  98         { H4_RECV_EVENT,  .recv = hci_recv_frame   },
  99 };
 100 
 101 static int ag6xx_recv(struct hci_uart *hu, const void *data, int count)
 102 {
 103         struct ag6xx_data *ag6xx = hu->priv;
 104 
 105         if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
 106                 return -EUNATCH;
 107 
 108         ag6xx->rx_skb = h4_recv_buf(hu->hdev, ag6xx->rx_skb, data, count,
 109                                     ag6xx_recv_pkts,
 110                                     ARRAY_SIZE(ag6xx_recv_pkts));
 111         if (IS_ERR(ag6xx->rx_skb)) {
 112                 int err = PTR_ERR(ag6xx->rx_skb);
 113                 bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
 114                 ag6xx->rx_skb = NULL;
 115                 return err;
 116         }
 117 
 118         return count;
 119 }
 120 
 121 static int intel_mem_write(struct hci_dev *hdev, u32 addr, u32 plen,
 122                            const void *data)
 123 {
 124         /* Can write a maximum of 247 bytes per HCI command.
 125          * HCI cmd Header (3), Intel mem write header (6), data (247).
 126          */
 127         while (plen > 0) {
 128                 struct sk_buff *skb;
 129                 u8 cmd_param[253], fragment_len = (plen > 247) ? 247 : plen;
 130                 __le32 leaddr = cpu_to_le32(addr);
 131 
 132                 memcpy(cmd_param, &leaddr, 4);
 133                 cmd_param[4] = 0;
 134                 cmd_param[5] = fragment_len;
 135                 memcpy(cmd_param + 6, data, fragment_len);
 136 
 137                 skb = __hci_cmd_sync(hdev, 0xfc8e, fragment_len + 6, cmd_param,
 138                                      HCI_INIT_TIMEOUT);
 139                 if (IS_ERR(skb))
 140                         return PTR_ERR(skb);
 141                 kfree_skb(skb);
 142 
 143                 plen -= fragment_len;
 144                 data += fragment_len;
 145                 addr += fragment_len;
 146         }
 147 
 148         return 0;
 149 }
 150 
 151 static int ag6xx_setup(struct hci_uart *hu)
 152 {
 153         struct hci_dev *hdev = hu->hdev;
 154         struct sk_buff *skb;
 155         struct intel_version ver;
 156         const struct firmware *fw;
 157         const u8 *fw_ptr;
 158         char fwname[64];
 159         bool patched = false;
 160         int err;
 161 
 162         hu->hdev->set_diag = btintel_set_diag;
 163         hu->hdev->set_bdaddr = btintel_set_bdaddr;
 164 
 165         err = btintel_enter_mfg(hdev);
 166         if (err)
 167                 return err;
 168 
 169         err = btintel_read_version(hdev, &ver);
 170         if (err)
 171                 return err;
 172 
 173         btintel_version_info(hdev, &ver);
 174 
 175         /* The hardware platform number has a fixed value of 0x37 and
 176          * for now only accept this single value.
 177          */
 178         if (ver.hw_platform != 0x37) {
 179                 bt_dev_err(hdev, "Unsupported Intel hardware platform: 0x%X",
 180                            ver.hw_platform);
 181                 return -EINVAL;
 182         }
 183 
 184         /* Only the hardware variant iBT 2.1 (AG6XX) is supported by this
 185          * firmware setup method.
 186          */
 187         if (ver.hw_variant != 0x0a) {
 188                 bt_dev_err(hdev, "Unsupported Intel hardware variant: 0x%x",
 189                            ver.hw_variant);
 190                 return -EINVAL;
 191         }
 192 
 193         snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bddata",
 194                  ver.hw_platform, ver.hw_variant);
 195 
 196         err = request_firmware(&fw, fwname, &hdev->dev);
 197         if (err < 0) {
 198                 bt_dev_err(hdev, "Failed to open Intel bddata file: %s (%d)",
 199                            fwname, err);
 200                 goto patch;
 201         }
 202         fw_ptr = fw->data;
 203 
 204         bt_dev_info(hdev, "Applying bddata (%s)", fwname);
 205 
 206         skb = __hci_cmd_sync_ev(hdev, 0xfc2f, fw->size, fw->data,
 207                                 HCI_EV_CMD_STATUS, HCI_CMD_TIMEOUT);
 208         if (IS_ERR(skb)) {
 209                 bt_dev_err(hdev, "Applying bddata failed (%ld)", PTR_ERR(skb));
 210                 release_firmware(fw);
 211                 return PTR_ERR(skb);
 212         }
 213         kfree_skb(skb);
 214 
 215         release_firmware(fw);
 216 
 217 patch:
 218         /* If there is no applied patch, fw_patch_num is always 0x00. In other
 219          * cases, current firmware is already patched. No need to patch it.
 220          */
 221         if (ver.fw_patch_num) {
 222                 bt_dev_info(hdev, "Device is already patched. patch num: %02x",
 223                             ver.fw_patch_num);
 224                 patched = true;
 225                 goto complete;
 226         }
 227 
 228         snprintf(fwname, sizeof(fwname),
 229                  "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.pbn",
 230                  ver.hw_platform, ver.hw_variant, ver.hw_revision,
 231                  ver.fw_variant,  ver.fw_revision, ver.fw_build_num,
 232                  ver.fw_build_ww, ver.fw_build_yy);
 233 
 234         err = request_firmware(&fw, fwname, &hdev->dev);
 235         if (err < 0) {
 236                 bt_dev_err(hdev, "Failed to open Intel patch file: %s(%d)",
 237                            fwname, err);
 238                 goto complete;
 239         }
 240         fw_ptr = fw->data;
 241 
 242         bt_dev_info(hdev, "Patching firmware file (%s)", fwname);
 243 
 244         /* PBN patch file contains a list of binary patches to be applied on top
 245          * of the embedded firmware. Each patch entry header contains the target
 246          * address and patch size.
 247          *
 248          * Patch entry:
 249          * | addr(le) | patch_len(le) | patch_data |
 250          * | 4 Bytes  |    4 Bytes    |   n Bytes  |
 251          *
 252          * PBN file is terminated by a patch entry whose address is 0xffffffff.
 253          */
 254         while (fw->size > fw_ptr - fw->data) {
 255                 struct pbn_entry *pbn = (void *)fw_ptr;
 256                 u32 addr, plen;
 257 
 258                 if (pbn->addr == 0xffffffff) {
 259                         bt_dev_info(hdev, "Patching complete");
 260                         patched = true;
 261                         break;
 262                 }
 263 
 264                 addr = le32_to_cpu(pbn->addr);
 265                 plen = le32_to_cpu(pbn->plen);
 266 
 267                 if (fw->data + fw->size <= pbn->data + plen) {
 268                         bt_dev_info(hdev, "Invalid patch len (%d)", plen);
 269                         break;
 270                 }
 271 
 272                 bt_dev_info(hdev, "Patching %td/%zu", (fw_ptr - fw->data),
 273                             fw->size);
 274 
 275                 err = intel_mem_write(hdev, addr, plen, pbn->data);
 276                 if (err) {
 277                         bt_dev_err(hdev, "Patching failed");
 278                         break;
 279                 }
 280 
 281                 fw_ptr = pbn->data + plen;
 282         }
 283 
 284         release_firmware(fw);
 285 
 286 complete:
 287         /* Exit manufacturing mode and reset */
 288         err = btintel_exit_mfg(hdev, true, patched);
 289         if (err)
 290                 return err;
 291 
 292         /* Set the event mask for Intel specific vendor events. This enables
 293          * a few extra events that are useful during general operation.
 294          */
 295         btintel_set_event_mask_mfg(hdev, false);
 296 
 297         btintel_check_bdaddr(hdev);
 298         return 0;
 299 }
 300 
 301 static const struct hci_uart_proto ag6xx_proto = {
 302         .id             = HCI_UART_AG6XX,
 303         .name           = "AG6XX",
 304         .manufacturer   = 2,
 305         .open           = ag6xx_open,
 306         .close          = ag6xx_close,
 307         .flush          = ag6xx_flush,
 308         .setup          = ag6xx_setup,
 309         .recv           = ag6xx_recv,
 310         .enqueue        = ag6xx_enqueue,
 311         .dequeue        = ag6xx_dequeue,
 312 };
 313 
 314 int __init ag6xx_init(void)
 315 {
 316         return hci_uart_register_proto(&ag6xx_proto);
 317 }
 318 
 319 int __exit ag6xx_deinit(void)
 320 {
 321         return hci_uart_unregister_proto(&ag6xx_proto);
 322 }
/* [<][>][^][v][top][bottom][index][help] */
root/drivers/bluetooth/hci_ag6xx.c

DEFINITIONS
