drivers/power/reset/keystone-reset.c

/* [<][>][^][v][top][bottom][index][help] */
This source file includes following definitions.
rsctrl_enable_rspll_write
rsctrl_restart_handler
rsctrl_probe
   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * TI keystone reboot driver
   4  *
   5  * Copyright (C) 2014 Texas Instruments Incorporated. http://www.ti.com/
   6  *
   7  * Author: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
   8  */
   9 
  10 #include <linux/io.h>
  11 #include <linux/module.h>
  12 #include <linux/notifier.h>
  13 #include <linux/reboot.h>
  14 #include <linux/regmap.h>
  15 #include <linux/mfd/syscon.h>
  16 #include <linux/of_platform.h>
  17 
  18 #define RSTYPE_RG                       0x0
  19 #define RSCTRL_RG                       0x4
  20 #define RSCFG_RG                        0x8
  21 #define RSISO_RG                        0xc
  22 
  23 #define RSCTRL_KEY_MASK                 0x0000ffff
  24 #define RSCTRL_RESET_MASK               BIT(16)
  25 #define RSCTRL_KEY                      0x5a69
  26 
  27 #define RSMUX_OMODE_MASK                0xe
  28 #define RSMUX_OMODE_RESET_ON            0xa
  29 #define RSMUX_OMODE_RESET_OFF           0x0
  30 #define RSMUX_LOCK_MASK                 0x1
  31 #define RSMUX_LOCK_SET                  0x1
  32 
  33 #define RSCFG_RSTYPE_SOFT               0x300f
  34 #define RSCFG_RSTYPE_HARD               0x0
  35 
  36 #define WDT_MUX_NUMBER                  0x4
  37 
  38 static int rspll_offset;
  39 static struct regmap *pllctrl_regs;
  40 
  41 /**
  42  * rsctrl_enable_rspll_write - enable access to RSCTRL, RSCFG
  43  * To be able to access to RSCTRL, RSCFG registers
  44  * we have to write a key before
  45  */
  46 static inline int rsctrl_enable_rspll_write(void)
  47 {
  48         return regmap_update_bits(pllctrl_regs, rspll_offset + RSCTRL_RG,
  49                                   RSCTRL_KEY_MASK, RSCTRL_KEY);
  50 }
  51 
  52 static int rsctrl_restart_handler(struct notifier_block *this,
  53                                   unsigned long mode, void *cmd)
  54 {
  55         /* enable write access to RSTCTRL */
  56         rsctrl_enable_rspll_write();
  57 
  58         /* reset the SOC */
  59         regmap_update_bits(pllctrl_regs, rspll_offset + RSCTRL_RG,
  60                            RSCTRL_RESET_MASK, 0);
  61 
  62         return NOTIFY_DONE;
  63 }
  64 
  65 static struct notifier_block rsctrl_restart_nb = {
  66         .notifier_call = rsctrl_restart_handler,
  67         .priority = 128,
  68 };
  69 
  70 static const struct of_device_id rsctrl_of_match[] = {
  71         {.compatible = "ti,keystone-reset", },
  72         {},
  73 };
  74 
  75 static int rsctrl_probe(struct platform_device *pdev)
  76 {
  77         int i;
  78         int ret;
  79         u32 val;
  80         unsigned int rg;
  81         u32 rsmux_offset;
  82         struct regmap *devctrl_regs;
  83         struct device *dev = &pdev->dev;
  84         struct device_node *np = dev->of_node;
  85 
  86         if (!np)
  87                 return -ENODEV;
  88 
  89         /* get regmaps */
  90         pllctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-pll");
  91         if (IS_ERR(pllctrl_regs))
  92                 return PTR_ERR(pllctrl_regs);
  93 
  94         devctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-dev");
  95         if (IS_ERR(devctrl_regs))
  96                 return PTR_ERR(devctrl_regs);
  97 
  98         ret = of_property_read_u32_index(np, "ti,syscon-pll", 1, &rspll_offset);
  99         if (ret) {
 100                 dev_err(dev, "couldn't read the reset pll offset!\n");
 101                 return -EINVAL;
 102         }
 103 
 104         ret = of_property_read_u32_index(np, "ti,syscon-dev", 1, &rsmux_offset);
 105         if (ret) {
 106                 dev_err(dev, "couldn't read the rsmux offset!\n");
 107                 return -EINVAL;
 108         }
 109 
 110         /* set soft/hard reset */
 111         val = of_property_read_bool(np, "ti,soft-reset");
 112         val = val ? RSCFG_RSTYPE_SOFT : RSCFG_RSTYPE_HARD;
 113 
 114         ret = rsctrl_enable_rspll_write();
 115         if (ret)
 116                 return ret;
 117 
 118         ret = regmap_write(pllctrl_regs, rspll_offset + RSCFG_RG, val);
 119         if (ret)
 120                 return ret;
 121 
 122         /* disable a reset isolation for all module clocks */
 123         ret = regmap_write(pllctrl_regs, rspll_offset + RSISO_RG, 0);
 124         if (ret)
 125                 return ret;
 126 
 127         /* enable a reset for watchdogs from wdt-list */
 128         for (i = 0; i < WDT_MUX_NUMBER; i++) {
 129                 ret = of_property_read_u32_index(np, "ti,wdt-list", i, &val);
 130                 if (ret == -EOVERFLOW && !i) {
 131                         dev_err(dev, "ti,wdt-list property has to contain at"
 132                                 "least one entry\n");
 133                         return -EINVAL;
 134                 } else if (ret) {
 135                         break;
 136                 }
 137 
 138                 if (val >= WDT_MUX_NUMBER) {
 139                         dev_err(dev, "ti,wdt-list property can contain "
 140                                 "only numbers < 4\n");
 141                         return -EINVAL;
 142                 }
 143 
 144                 rg = rsmux_offset + val * 4;
 145 
 146                 ret = regmap_update_bits(devctrl_regs, rg, RSMUX_OMODE_MASK,
 147                                          RSMUX_OMODE_RESET_ON |
 148                                          RSMUX_LOCK_SET);
 149                 if (ret)
 150                         return ret;
 151         }
 152 
 153         ret = register_restart_handler(&rsctrl_restart_nb);
 154         if (ret)
 155                 dev_err(dev, "cannot register restart handler (err=%d)\n", ret);
 156 
 157         return ret;
 158 }
 159 
 160 static struct platform_driver rsctrl_driver = {
 161         .probe = rsctrl_probe,
 162         .driver = {
 163                 .name = KBUILD_MODNAME,
 164                 .of_match_table = rsctrl_of_match,
 165         },
 166 };
 167 module_platform_driver(rsctrl_driver);
 168 
 169 MODULE_AUTHOR("Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>");
 170 MODULE_DESCRIPTION("Texas Instruments keystone reset driver");
 171 MODULE_LICENSE("GPL v2");
 172 MODULE_ALIAS("platform:" KBUILD_MODNAME);
/* [<][>][^][v][top][bottom][index][help] */
root/drivers/power/reset/keystone-reset.c

DEFINITIONS
