drivers/hwmon/smsc47m1.c

/* [<][>][^][v][top][bottom][index][help] */
This source file includes following definitions.
superio_outb
superio_inb
superio_enter
superio_exit
smsc47m1_read_value
smsc47m1_write_value
smsc47m1_update_device
fan_show
fan_min_show
fan_div_show
fan_alarm_show
pwm_show
pwm_en_show
alarms_show
fan_min_store
fan_div_store
pwm_store
pwm_en_store
name_show
smsc47m1_find
smsc47m1_restore
smsc47m1_handle_resources
smsc47m1_remove_files
smsc47m1_probe
smsc47m1_remove
smsc47m1_device_add
sm_smsc47m1_init
sm_smsc47m1_exit
   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * smsc47m1.c - Part of lm_sensors, Linux kernel modules
   4  *              for hardware monitoring
   5  *
   6  * Supports the SMSC LPC47B27x, LPC47M10x, LPC47M112, LPC47M13x,
   7  * LPC47M14x, LPC47M15x, LPC47M192, LPC47M292 and LPC47M997
   8  * Super-I/O chips.
   9  *
  10  * Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
  11  * Copyright (C) 2004-2007 Jean Delvare <jdelvare@suse.de>
  12  * Ported to Linux 2.6 by Gabriele Gorla <gorlik@yahoo.com>
  13  *                      and Jean Delvare
  14  */
  15 
  16 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  17 
  18 #include <linux/module.h>
  19 #include <linux/slab.h>
  20 #include <linux/ioport.h>
  21 #include <linux/jiffies.h>
  22 #include <linux/platform_device.h>
  23 #include <linux/hwmon.h>
  24 #include <linux/hwmon-sysfs.h>
  25 #include <linux/err.h>
  26 #include <linux/init.h>
  27 #include <linux/mutex.h>
  28 #include <linux/sysfs.h>
  29 #include <linux/acpi.h>
  30 #include <linux/io.h>
  31 
  32 static unsigned short force_id;
  33 module_param(force_id, ushort, 0);
  34 MODULE_PARM_DESC(force_id, "Override the detected device ID");
  35 
  36 static struct platform_device *pdev;
  37 
  38 #define DRVNAME "smsc47m1"
  39 enum chips { smsc47m1, smsc47m2 };
  40 
  41 /* Super-I/0 registers and commands */
  42 
  43 #define REG     0x2e    /* The register to read/write */
  44 #define VAL     0x2f    /* The value to read/write */
  45 
  46 static inline void
  47 superio_outb(int reg, int val)
  48 {
  49         outb(reg, REG);
  50         outb(val, VAL);
  51 }
  52 
  53 static inline int
  54 superio_inb(int reg)
  55 {
  56         outb(reg, REG);
  57         return inb(VAL);
  58 }
  59 
  60 /* logical device for fans is 0x0A */
  61 #define superio_select() superio_outb(0x07, 0x0A)
  62 
  63 static inline int
  64 superio_enter(void)
  65 {
  66         if (!request_muxed_region(REG, 2, DRVNAME))
  67                 return -EBUSY;
  68 
  69         outb(0x55, REG);
  70         return 0;
  71 }
  72 
  73 static inline void
  74 superio_exit(void)
  75 {
  76         outb(0xAA, REG);
  77         release_region(REG, 2);
  78 }
  79 
  80 #define SUPERIO_REG_ACT         0x30
  81 #define SUPERIO_REG_BASE        0x60
  82 #define SUPERIO_REG_DEVID       0x20
  83 #define SUPERIO_REG_DEVREV      0x21
  84 
  85 /* Logical device registers */
  86 
  87 #define SMSC_EXTENT             0x80
  88 
  89 /* nr is 0 or 1 in the macros below */
  90 #define SMSC47M1_REG_ALARM              0x04
  91 #define SMSC47M1_REG_TPIN(nr)           (0x34 - (nr))
  92 #define SMSC47M1_REG_PPIN(nr)           (0x36 - (nr))
  93 #define SMSC47M1_REG_FANDIV             0x58
  94 
  95 static const u8 SMSC47M1_REG_FAN[3]             = { 0x59, 0x5a, 0x6b };
  96 static const u8 SMSC47M1_REG_FAN_PRELOAD[3]     = { 0x5b, 0x5c, 0x6c };
  97 static const u8 SMSC47M1_REG_PWM[3]             = { 0x56, 0x57, 0x69 };
  98 
  99 #define SMSC47M2_REG_ALARM6             0x09
 100 #define SMSC47M2_REG_TPIN1              0x38
 101 #define SMSC47M2_REG_TPIN2              0x37
 102 #define SMSC47M2_REG_TPIN3              0x2d
 103 #define SMSC47M2_REG_PPIN3              0x2c
 104 #define SMSC47M2_REG_FANDIV3            0x6a
 105 
 106 #define MIN_FROM_REG(reg, div)          ((reg) >= 192 ? 0 : \
 107                                          983040 / ((192 - (reg)) * (div)))
 108 #define FAN_FROM_REG(reg, div, preload) ((reg) <= (preload) || (reg) == 255 ? \
 109                                          0 : \
 110                                          983040 / (((reg) - (preload)) * (div)))
 111 #define DIV_FROM_REG(reg)               (1 << (reg))
 112 #define PWM_FROM_REG(reg)               (((reg) & 0x7E) << 1)
 113 #define PWM_EN_FROM_REG(reg)            ((~(reg)) & 0x01)
 114 #define PWM_TO_REG(reg)                 (((reg) >> 1) & 0x7E)
 115 
 116 struct smsc47m1_data {
 117         unsigned short addr;
 118         const char *name;
 119         enum chips type;
 120         struct device *hwmon_dev;
 121 
 122         struct mutex update_lock;
 123         unsigned long last_updated;     /* In jiffies */
 124 
 125         u8 fan[3];              /* Register value */
 126         u8 fan_preload[3];      /* Register value */
 127         u8 fan_div[3];          /* Register encoding, shifted right */
 128         u8 alarms;              /* Register encoding */
 129         u8 pwm[3];              /* Register value (bit 0 is disable) */
 130 };
 131 
 132 struct smsc47m1_sio_data {
 133         enum chips type;
 134         u8 activate;            /* Remember initial device state */
 135 };
 136 
 137 static inline int smsc47m1_read_value(struct smsc47m1_data *data, u8 reg)
 138 {
 139         return inb_p(data->addr + reg);
 140 }
 141 
 142 static inline void smsc47m1_write_value(struct smsc47m1_data *data, u8 reg,
 143                 u8 value)
 144 {
 145         outb_p(value, data->addr + reg);
 146 }
 147 
 148 static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
 149                 int init)
 150 {
 151         struct smsc47m1_data *data = dev_get_drvdata(dev);
 152 
 153         mutex_lock(&data->update_lock);
 154 
 155         if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || init) {
 156                 int i, fan_nr;
 157                 fan_nr = data->type == smsc47m2 ? 3 : 2;
 158 
 159                 for (i = 0; i < fan_nr; i++) {
 160                         data->fan[i] = smsc47m1_read_value(data,
 161                                        SMSC47M1_REG_FAN[i]);
 162                         data->fan_preload[i] = smsc47m1_read_value(data,
 163                                                SMSC47M1_REG_FAN_PRELOAD[i]);
 164                         data->pwm[i] = smsc47m1_read_value(data,
 165                                        SMSC47M1_REG_PWM[i]);
 166                 }
 167 
 168                 i = smsc47m1_read_value(data, SMSC47M1_REG_FANDIV);
 169                 data->fan_div[0] = (i >> 4) & 0x03;
 170                 data->fan_div[1] = i >> 6;
 171 
 172                 data->alarms = smsc47m1_read_value(data,
 173                                SMSC47M1_REG_ALARM) >> 6;
 174                 /* Clear alarms if needed */
 175                 if (data->alarms)
 176                         smsc47m1_write_value(data, SMSC47M1_REG_ALARM, 0xC0);
 177 
 178                 if (fan_nr >= 3) {
 179                         data->fan_div[2] = (smsc47m1_read_value(data,
 180                                             SMSC47M2_REG_FANDIV3) >> 4) & 0x03;
 181                         data->alarms |= (smsc47m1_read_value(data,
 182                                          SMSC47M2_REG_ALARM6) & 0x40) >> 4;
 183                         /* Clear alarm if needed */
 184                         if (data->alarms & 0x04)
 185                                 smsc47m1_write_value(data,
 186                                                      SMSC47M2_REG_ALARM6,
 187                                                      0x40);
 188                 }
 189 
 190                 data->last_updated = jiffies;
 191         }
 192 
 193         mutex_unlock(&data->update_lock);
 194         return data;
 195 }
 196 
 197 static ssize_t fan_show(struct device *dev, struct device_attribute *devattr,
 198                         char *buf)
 199 {
 200         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 201         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 202         int nr = attr->index;
 203         /*
 204          * This chip (stupidly) stops monitoring fan speed if PWM is
 205          * enabled and duty cycle is 0%. This is fine if the monitoring
 206          * and control concern the same fan, but troublesome if they are
 207          * not (which could as well happen).
 208          */
 209         int rpm = (data->pwm[nr] & 0x7F) == 0x00 ? 0 :
 210                   FAN_FROM_REG(data->fan[nr],
 211                                DIV_FROM_REG(data->fan_div[nr]),
 212                                data->fan_preload[nr]);
 213         return sprintf(buf, "%d\n", rpm);
 214 }
 215 
 216 static ssize_t fan_min_show(struct device *dev,
 217                             struct device_attribute *devattr, char *buf)
 218 {
 219         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 220         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 221         int nr = attr->index;
 222         int rpm = MIN_FROM_REG(data->fan_preload[nr],
 223                                DIV_FROM_REG(data->fan_div[nr]));
 224         return sprintf(buf, "%d\n", rpm);
 225 }
 226 
 227 static ssize_t fan_div_show(struct device *dev,
 228                             struct device_attribute *devattr, char *buf)
 229 {
 230         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 231         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 232         return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[attr->index]));
 233 }
 234 
 235 static ssize_t fan_alarm_show(struct device *dev,
 236                               struct device_attribute *devattr, char *buf)
 237 {
 238         int bitnr = to_sensor_dev_attr(devattr)->index;
 239         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 240         return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
 241 }
 242 
 243 static ssize_t pwm_show(struct device *dev, struct device_attribute *devattr,
 244                         char *buf)
 245 {
 246         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 247         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 248         return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[attr->index]));
 249 }
 250 
 251 static ssize_t pwm_en_show(struct device *dev,
 252                            struct device_attribute *devattr, char *buf)
 253 {
 254         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 255         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 256         return sprintf(buf, "%d\n", PWM_EN_FROM_REG(data->pwm[attr->index]));
 257 }
 258 
 259 static ssize_t alarms_show(struct device *dev,
 260                            struct device_attribute *devattr, char *buf)
 261 {
 262         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 263         return sprintf(buf, "%d\n", data->alarms);
 264 }
 265 
 266 static ssize_t fan_min_store(struct device *dev,
 267                              struct device_attribute *devattr,
 268                              const char *buf, size_t count)
 269 {
 270         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 271         struct smsc47m1_data *data = dev_get_drvdata(dev);
 272         int nr = attr->index;
 273         long rpmdiv;
 274         long val;
 275         int err;
 276 
 277         err = kstrtol(buf, 10, &val);
 278         if (err)
 279                 return err;
 280 
 281         mutex_lock(&data->update_lock);
 282         rpmdiv = val * DIV_FROM_REG(data->fan_div[nr]);
 283 
 284         if (983040 > 192 * rpmdiv || 2 * rpmdiv > 983040) {
 285                 mutex_unlock(&data->update_lock);
 286                 return -EINVAL;
 287         }
 288 
 289         data->fan_preload[nr] = 192 - ((983040 + rpmdiv / 2) / rpmdiv);
 290         smsc47m1_write_value(data, SMSC47M1_REG_FAN_PRELOAD[nr],
 291                              data->fan_preload[nr]);
 292         mutex_unlock(&data->update_lock);
 293 
 294         return count;
 295 }
 296 
 297 /*
 298  * Note: we save and restore the fan minimum here, because its value is
 299  * determined in part by the fan clock divider.  This follows the principle
 300  * of least surprise; the user doesn't expect the fan minimum to change just
 301  * because the divider changed.
 302  */
 303 static ssize_t fan_div_store(struct device *dev,
 304                              struct device_attribute *devattr,
 305                              const char *buf, size_t count)
 306 {
 307         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 308         struct smsc47m1_data *data = dev_get_drvdata(dev);
 309         int nr = attr->index;
 310         long new_div;
 311         int err;
 312         long tmp;
 313         u8 old_div = DIV_FROM_REG(data->fan_div[nr]);
 314 
 315         err = kstrtol(buf, 10, &new_div);
 316         if (err)
 317                 return err;
 318 
 319         if (new_div == old_div) /* No change */
 320                 return count;
 321 
 322         mutex_lock(&data->update_lock);
 323         switch (new_div) {
 324         case 1:
 325                 data->fan_div[nr] = 0;
 326                 break;
 327         case 2:
 328                 data->fan_div[nr] = 1;
 329                 break;
 330         case 4:
 331                 data->fan_div[nr] = 2;
 332                 break;
 333         case 8:
 334                 data->fan_div[nr] = 3;
 335                 break;
 336         default:
 337                 mutex_unlock(&data->update_lock);
 338                 return -EINVAL;
 339         }
 340 
 341         switch (nr) {
 342         case 0:
 343         case 1:
 344                 tmp = smsc47m1_read_value(data, SMSC47M1_REG_FANDIV)
 345                       & ~(0x03 << (4 + 2 * nr));
 346                 tmp |= data->fan_div[nr] << (4 + 2 * nr);
 347                 smsc47m1_write_value(data, SMSC47M1_REG_FANDIV, tmp);
 348                 break;
 349         case 2:
 350                 tmp = smsc47m1_read_value(data, SMSC47M2_REG_FANDIV3) & 0xCF;
 351                 tmp |= data->fan_div[2] << 4;
 352                 smsc47m1_write_value(data, SMSC47M2_REG_FANDIV3, tmp);
 353                 break;
 354         default:
 355                 BUG();
 356         }
 357 
 358         /* Preserve fan min */
 359         tmp = 192 - (old_div * (192 - data->fan_preload[nr])
 360                      + new_div / 2) / new_div;
 361         data->fan_preload[nr] = clamp_val(tmp, 0, 191);
 362         smsc47m1_write_value(data, SMSC47M1_REG_FAN_PRELOAD[nr],
 363                              data->fan_preload[nr]);
 364         mutex_unlock(&data->update_lock);
 365 
 366         return count;
 367 }
 368 
 369 static ssize_t pwm_store(struct device *dev, struct device_attribute *devattr,
 370                          const char *buf, size_t count)
 371 {
 372         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 373         struct smsc47m1_data *data = dev_get_drvdata(dev);
 374         int nr = attr->index;
 375         long val;
 376         int err;
 377 
 378         err = kstrtol(buf, 10, &val);
 379         if (err)
 380                 return err;
 381 
 382         if (val < 0 || val > 255)
 383                 return -EINVAL;
 384 
 385         mutex_lock(&data->update_lock);
 386         data->pwm[nr] &= 0x81; /* Preserve additional bits */
 387         data->pwm[nr] |= PWM_TO_REG(val);
 388         smsc47m1_write_value(data, SMSC47M1_REG_PWM[nr],
 389                              data->pwm[nr]);
 390         mutex_unlock(&data->update_lock);
 391 
 392         return count;
 393 }
 394 
 395 static ssize_t pwm_en_store(struct device *dev,
 396                             struct device_attribute *devattr, const char *buf,
 397                             size_t count)
 398 {
 399         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 400         struct smsc47m1_data *data = dev_get_drvdata(dev);
 401         int nr = attr->index;
 402         unsigned long val;
 403         int err;
 404 
 405         err = kstrtoul(buf, 10, &val);
 406         if (err)
 407                 return err;
 408 
 409         if (val > 1)
 410                 return -EINVAL;
 411 
 412         mutex_lock(&data->update_lock);
 413         data->pwm[nr] &= 0xFE; /* preserve the other bits */
 414         data->pwm[nr] |= !val;
 415         smsc47m1_write_value(data, SMSC47M1_REG_PWM[nr],
 416                              data->pwm[nr]);
 417         mutex_unlock(&data->update_lock);
 418 
 419         return count;
 420 }
 421 
 422 static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0);
 423 static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0);
 424 static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0);
 425 static SENSOR_DEVICE_ATTR_RO(fan1_alarm, fan_alarm, 0);
 426 static SENSOR_DEVICE_ATTR_RW(pwm1, pwm, 0);
 427 static SENSOR_DEVICE_ATTR_RW(pwm1_enable, pwm_en, 0);
 428 static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1);
 429 static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1);
 430 static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1);
 431 static SENSOR_DEVICE_ATTR_RO(fan2_alarm, fan_alarm, 1);
 432 static SENSOR_DEVICE_ATTR_RW(pwm2, pwm, 1);
 433 static SENSOR_DEVICE_ATTR_RW(pwm2_enable, pwm_en, 1);
 434 static SENSOR_DEVICE_ATTR_RO(fan3_input, fan, 2);
 435 static SENSOR_DEVICE_ATTR_RW(fan3_min, fan_min, 2);
 436 static SENSOR_DEVICE_ATTR_RW(fan3_div, fan_div, 2);
 437 static SENSOR_DEVICE_ATTR_RO(fan3_alarm, fan_alarm, 2);
 438 static SENSOR_DEVICE_ATTR_RW(pwm3, pwm, 2);
 439 static SENSOR_DEVICE_ATTR_RW(pwm3_enable, pwm_en, 2);
 440 
 441 static DEVICE_ATTR_RO(alarms);
 442 
 443 static ssize_t name_show(struct device *dev, struct device_attribute
 444                          *devattr, char *buf)
 445 {
 446         struct smsc47m1_data *data = dev_get_drvdata(dev);
 447 
 448         return sprintf(buf, "%s\n", data->name);
 449 }
 450 static DEVICE_ATTR_RO(name);
 451 
 452 static struct attribute *smsc47m1_attributes_fan1[] = {
 453         &sensor_dev_attr_fan1_input.dev_attr.attr,
 454         &sensor_dev_attr_fan1_min.dev_attr.attr,
 455         &sensor_dev_attr_fan1_div.dev_attr.attr,
 456         &sensor_dev_attr_fan1_alarm.dev_attr.attr,
 457         NULL
 458 };
 459 
 460 static const struct attribute_group smsc47m1_group_fan1 = {
 461         .attrs = smsc47m1_attributes_fan1,
 462 };
 463 
 464 static struct attribute *smsc47m1_attributes_fan2[] = {
 465         &sensor_dev_attr_fan2_input.dev_attr.attr,
 466         &sensor_dev_attr_fan2_min.dev_attr.attr,
 467         &sensor_dev_attr_fan2_div.dev_attr.attr,
 468         &sensor_dev_attr_fan2_alarm.dev_attr.attr,
 469         NULL
 470 };
 471 
 472 static const struct attribute_group smsc47m1_group_fan2 = {
 473         .attrs = smsc47m1_attributes_fan2,
 474 };
 475 
 476 static struct attribute *smsc47m1_attributes_fan3[] = {
 477         &sensor_dev_attr_fan3_input.dev_attr.attr,
 478         &sensor_dev_attr_fan3_min.dev_attr.attr,
 479         &sensor_dev_attr_fan3_div.dev_attr.attr,
 480         &sensor_dev_attr_fan3_alarm.dev_attr.attr,
 481         NULL
 482 };
 483 
 484 static const struct attribute_group smsc47m1_group_fan3 = {
 485         .attrs = smsc47m1_attributes_fan3,
 486 };
 487 
 488 static struct attribute *smsc47m1_attributes_pwm1[] = {
 489         &sensor_dev_attr_pwm1.dev_attr.attr,
 490         &sensor_dev_attr_pwm1_enable.dev_attr.attr,
 491         NULL
 492 };
 493 
 494 static const struct attribute_group smsc47m1_group_pwm1 = {
 495         .attrs = smsc47m1_attributes_pwm1,
 496 };
 497 
 498 static struct attribute *smsc47m1_attributes_pwm2[] = {
 499         &sensor_dev_attr_pwm2.dev_attr.attr,
 500         &sensor_dev_attr_pwm2_enable.dev_attr.attr,
 501         NULL
 502 };
 503 
 504 static const struct attribute_group smsc47m1_group_pwm2 = {
 505         .attrs = smsc47m1_attributes_pwm2,
 506 };
 507 
 508 static struct attribute *smsc47m1_attributes_pwm3[] = {
 509         &sensor_dev_attr_pwm3.dev_attr.attr,
 510         &sensor_dev_attr_pwm3_enable.dev_attr.attr,
 511         NULL
 512 };
 513 
 514 static const struct attribute_group smsc47m1_group_pwm3 = {
 515         .attrs = smsc47m1_attributes_pwm3,
 516 };
 517 
 518 static struct attribute *smsc47m1_attributes[] = {
 519         &dev_attr_alarms.attr,
 520         &dev_attr_name.attr,
 521         NULL
 522 };
 523 
 524 static const struct attribute_group smsc47m1_group = {
 525         .attrs = smsc47m1_attributes,
 526 };
 527 
 528 static int __init smsc47m1_find(struct smsc47m1_sio_data *sio_data)
 529 {
 530         u8 val;
 531         unsigned short addr;
 532         int err;
 533 
 534         err = superio_enter();
 535         if (err)
 536                 return err;
 537 
 538         val = force_id ? force_id : superio_inb(SUPERIO_REG_DEVID);
 539 
 540         /*
 541          * SMSC LPC47M10x/LPC47M112/LPC47M13x (device id 0x59), LPC47M14x
 542          * (device id 0x5F) and LPC47B27x (device id 0x51) have fan control.
 543          * The LPC47M15x and LPC47M192 chips "with hardware monitoring block"
 544          * can do much more besides (device id 0x60).
 545          * The LPC47M997 is undocumented, but seems to be compatible with
 546          * the LPC47M192, and has the same device id.
 547          * The LPC47M292 (device id 0x6B) is somewhat compatible, but it
 548          * supports a 3rd fan, and the pin configuration registers are
 549          * unfortunately different.
 550          * The LPC47M233 has the same device id (0x6B) but is not compatible.
 551          * We check the high bit of the device revision register to
 552          * differentiate them.
 553          */
 554         switch (val) {
 555         case 0x51:
 556                 pr_info("Found SMSC LPC47B27x\n");
 557                 sio_data->type = smsc47m1;
 558                 break;
 559         case 0x59:
 560                 pr_info("Found SMSC LPC47M10x/LPC47M112/LPC47M13x\n");
 561                 sio_data->type = smsc47m1;
 562                 break;
 563         case 0x5F:
 564                 pr_info("Found SMSC LPC47M14x\n");
 565                 sio_data->type = smsc47m1;
 566                 break;
 567         case 0x60:
 568                 pr_info("Found SMSC LPC47M15x/LPC47M192/LPC47M997\n");
 569                 sio_data->type = smsc47m1;
 570                 break;
 571         case 0x6B:
 572                 if (superio_inb(SUPERIO_REG_DEVREV) & 0x80) {
 573                         pr_debug("Found SMSC LPC47M233, unsupported\n");
 574                         superio_exit();
 575                         return -ENODEV;
 576                 }
 577 
 578                 pr_info("Found SMSC LPC47M292\n");
 579                 sio_data->type = smsc47m2;
 580                 break;
 581         default:
 582                 superio_exit();
 583                 return -ENODEV;
 584         }
 585 
 586         superio_select();
 587         addr = (superio_inb(SUPERIO_REG_BASE) << 8)
 588               |  superio_inb(SUPERIO_REG_BASE + 1);
 589         if (addr == 0) {
 590                 pr_info("Device address not set, will not use\n");
 591                 superio_exit();
 592                 return -ENODEV;
 593         }
 594 
 595         /*
 596          * Enable only if address is set (needed at least on the
 597          * Compaq Presario S4000NX)
 598          */
 599         sio_data->activate = superio_inb(SUPERIO_REG_ACT);
 600         if ((sio_data->activate & 0x01) == 0) {
 601                 pr_info("Enabling device\n");
 602                 superio_outb(SUPERIO_REG_ACT, sio_data->activate | 0x01);
 603         }
 604 
 605         superio_exit();
 606         return addr;
 607 }
 608 
 609 /* Restore device to its initial state */
 610 static void smsc47m1_restore(const struct smsc47m1_sio_data *sio_data)
 611 {
 612         if ((sio_data->activate & 0x01) == 0) {
 613                 if (!superio_enter()) {
 614                         superio_select();
 615                         pr_info("Disabling device\n");
 616                         superio_outb(SUPERIO_REG_ACT, sio_data->activate);
 617                         superio_exit();
 618                 } else {
 619                         pr_warn("Failed to disable device\n");
 620                 }
 621         }
 622 }
 623 
 624 #define CHECK           1
 625 #define REQUEST         2
 626 
 627 /*
 628  * This function can be used to:
 629  *  - test for resource conflicts with ACPI
 630  *  - request the resources
 631  * We only allocate the I/O ports we really need, to minimize the risk of
 632  * conflicts with ACPI or with other drivers.
 633  */
 634 static int __init smsc47m1_handle_resources(unsigned short address,
 635                                             enum chips type, int action,
 636                                             struct device *dev)
 637 {
 638         static const u8 ports_m1[] = {
 639                 /* register, region length */
 640                 0x04, 1,
 641                 0x33, 4,
 642                 0x56, 7,
 643         };
 644 
 645         static const u8 ports_m2[] = {
 646                 /* register, region length */
 647                 0x04, 1,
 648                 0x09, 1,
 649                 0x2c, 2,
 650                 0x35, 4,
 651                 0x56, 7,
 652                 0x69, 4,
 653         };
 654 
 655         int i, ports_size, err;
 656         const u8 *ports;
 657 
 658         switch (type) {
 659         case smsc47m1:
 660         default:
 661                 ports = ports_m1;
 662                 ports_size = ARRAY_SIZE(ports_m1);
 663                 break;
 664         case smsc47m2:
 665                 ports = ports_m2;
 666                 ports_size = ARRAY_SIZE(ports_m2);
 667                 break;
 668         }
 669 
 670         for (i = 0; i + 1 < ports_size; i += 2) {
 671                 unsigned short start = address + ports[i];
 672                 unsigned short len = ports[i + 1];
 673 
 674                 switch (action) {
 675                 case CHECK:
 676                         /* Only check for conflicts */
 677                         err = acpi_check_region(start, len, DRVNAME);
 678                         if (err)
 679                                 return err;
 680                         break;
 681                 case REQUEST:
 682                         /* Request the resources */
 683                         if (!devm_request_region(dev, start, len, DRVNAME)) {
 684                                 dev_err(dev,
 685                                         "Region 0x%hx-0x%hx already in use!\n",
 686                                         start, start + len);
 687                                 return -EBUSY;
 688                         }
 689                         break;
 690                 }
 691         }
 692 
 693         return 0;
 694 }
 695 
 696 static void smsc47m1_remove_files(struct device *dev)
 697 {
 698         sysfs_remove_group(&dev->kobj, &smsc47m1_group);
 699         sysfs_remove_group(&dev->kobj, &smsc47m1_group_fan1);
 700         sysfs_remove_group(&dev->kobj, &smsc47m1_group_fan2);
 701         sysfs_remove_group(&dev->kobj, &smsc47m1_group_fan3);
 702         sysfs_remove_group(&dev->kobj, &smsc47m1_group_pwm1);
 703         sysfs_remove_group(&dev->kobj, &smsc47m1_group_pwm2);
 704         sysfs_remove_group(&dev->kobj, &smsc47m1_group_pwm3);
 705 }
 706 
 707 static int __init smsc47m1_probe(struct platform_device *pdev)
 708 {
 709         struct device *dev = &pdev->dev;
 710         struct smsc47m1_sio_data *sio_data = dev_get_platdata(dev);
 711         struct smsc47m1_data *data;
 712         struct resource *res;
 713         int err;
 714         int fan1, fan2, fan3, pwm1, pwm2, pwm3;
 715 
 716         static const char * const names[] = {
 717                 "smsc47m1",
 718                 "smsc47m2",
 719         };
 720 
 721         res = platform_get_resource(pdev, IORESOURCE_IO, 0);
 722         err = smsc47m1_handle_resources(res->start, sio_data->type,
 723                                         REQUEST, dev);
 724         if (err < 0)
 725                 return err;
 726 
 727         data = devm_kzalloc(dev, sizeof(struct smsc47m1_data), GFP_KERNEL);
 728         if (!data)
 729                 return -ENOMEM;
 730 
 731         data->addr = res->start;
 732         data->type = sio_data->type;
 733         data->name = names[sio_data->type];
 734         mutex_init(&data->update_lock);
 735         platform_set_drvdata(pdev, data);
 736 
 737         /*
 738          * If no function is properly configured, there's no point in
 739          * actually registering the chip.
 740          */
 741         pwm1 = (smsc47m1_read_value(data, SMSC47M1_REG_PPIN(0)) & 0x05)
 742                == 0x04;
 743         pwm2 = (smsc47m1_read_value(data, SMSC47M1_REG_PPIN(1)) & 0x05)
 744                == 0x04;
 745         if (data->type == smsc47m2) {
 746                 fan1 = (smsc47m1_read_value(data, SMSC47M2_REG_TPIN1)
 747                         & 0x0d) == 0x09;
 748                 fan2 = (smsc47m1_read_value(data, SMSC47M2_REG_TPIN2)
 749                         & 0x0d) == 0x09;
 750                 fan3 = (smsc47m1_read_value(data, SMSC47M2_REG_TPIN3)
 751                         & 0x0d) == 0x0d;
 752                 pwm3 = (smsc47m1_read_value(data, SMSC47M2_REG_PPIN3)
 753                         & 0x0d) == 0x08;
 754         } else {
 755                 fan1 = (smsc47m1_read_value(data, SMSC47M1_REG_TPIN(0))
 756                         & 0x05) == 0x05;
 757                 fan2 = (smsc47m1_read_value(data, SMSC47M1_REG_TPIN(1))
 758                         & 0x05) == 0x05;
 759                 fan3 = 0;
 760                 pwm3 = 0;
 761         }
 762         if (!(fan1 || fan2 || fan3 || pwm1 || pwm2 || pwm3)) {
 763                 dev_warn(dev, "Device not configured, will not use\n");
 764                 return -ENODEV;
 765         }
 766 
 767         /*
 768          * Some values (fan min, clock dividers, pwm registers) may be
 769          * needed before any update is triggered, so we better read them
 770          * at least once here. We don't usually do it that way, but in
 771          * this particular case, manually reading 5 registers out of 8
 772          * doesn't make much sense and we're better using the existing
 773          * function.
 774          */
 775         smsc47m1_update_device(dev, 1);
 776 
 777         /* Register sysfs hooks */
 778         if (fan1) {
 779                 err = sysfs_create_group(&dev->kobj,
 780                                          &smsc47m1_group_fan1);
 781                 if (err)
 782                         goto error_remove_files;
 783         } else
 784                 dev_dbg(dev, "Fan 1 not enabled by hardware, skipping\n");
 785 
 786         if (fan2) {
 787                 err = sysfs_create_group(&dev->kobj,
 788                                          &smsc47m1_group_fan2);
 789                 if (err)
 790                         goto error_remove_files;
 791         } else
 792                 dev_dbg(dev, "Fan 2 not enabled by hardware, skipping\n");
 793 
 794         if (fan3) {
 795                 err = sysfs_create_group(&dev->kobj,
 796                                          &smsc47m1_group_fan3);
 797                 if (err)
 798                         goto error_remove_files;
 799         } else if (data->type == smsc47m2)
 800                 dev_dbg(dev, "Fan 3 not enabled by hardware, skipping\n");
 801 
 802         if (pwm1) {
 803                 err = sysfs_create_group(&dev->kobj,
 804                                          &smsc47m1_group_pwm1);
 805                 if (err)
 806                         goto error_remove_files;
 807         } else
 808                 dev_dbg(dev, "PWM 1 not enabled by hardware, skipping\n");
 809 
 810         if (pwm2) {
 811                 err = sysfs_create_group(&dev->kobj,
 812                                          &smsc47m1_group_pwm2);
 813                 if (err)
 814                         goto error_remove_files;
 815         } else
 816                 dev_dbg(dev, "PWM 2 not enabled by hardware, skipping\n");
 817 
 818         if (pwm3) {
 819                 err = sysfs_create_group(&dev->kobj,
 820                                          &smsc47m1_group_pwm3);
 821                 if (err)
 822                         goto error_remove_files;
 823         } else if (data->type == smsc47m2)
 824                 dev_dbg(dev, "PWM 3 not enabled by hardware, skipping\n");
 825 
 826         err = sysfs_create_group(&dev->kobj, &smsc47m1_group);
 827         if (err)
 828                 goto error_remove_files;
 829 
 830         data->hwmon_dev = hwmon_device_register(dev);
 831         if (IS_ERR(data->hwmon_dev)) {
 832                 err = PTR_ERR(data->hwmon_dev);
 833                 goto error_remove_files;
 834         }
 835 
 836         return 0;
 837 
 838 error_remove_files:
 839         smsc47m1_remove_files(dev);
 840         return err;
 841 }
 842 
 843 static int __exit smsc47m1_remove(struct platform_device *pdev)
 844 {
 845         struct smsc47m1_data *data = platform_get_drvdata(pdev);
 846 
 847         hwmon_device_unregister(data->hwmon_dev);
 848         smsc47m1_remove_files(&pdev->dev);
 849 
 850         return 0;
 851 }
 852 
 853 static struct platform_driver smsc47m1_driver = {
 854         .driver = {
 855                 .name   = DRVNAME,
 856         },
 857         .remove         = __exit_p(smsc47m1_remove),
 858 };
 859 
 860 static int __init smsc47m1_device_add(unsigned short address,
 861                                       const struct smsc47m1_sio_data *sio_data)
 862 {
 863         struct resource res = {
 864                 .start  = address,
 865                 .end    = address + SMSC_EXTENT - 1,
 866                 .name   = DRVNAME,
 867                 .flags  = IORESOURCE_IO,
 868         };
 869         int err;
 870 
 871         err = smsc47m1_handle_resources(address, sio_data->type, CHECK, NULL);
 872         if (err)
 873                 goto exit;
 874 
 875         pdev = platform_device_alloc(DRVNAME, address);
 876         if (!pdev) {
 877                 err = -ENOMEM;
 878                 pr_err("Device allocation failed\n");
 879                 goto exit;
 880         }
 881 
 882         err = platform_device_add_resources(pdev, &res, 1);
 883         if (err) {
 884                 pr_err("Device resource addition failed (%d)\n", err);
 885                 goto exit_device_put;
 886         }
 887 
 888         err = platform_device_add_data(pdev, sio_data,
 889                                        sizeof(struct smsc47m1_sio_data));
 890         if (err) {
 891                 pr_err("Platform data allocation failed\n");
 892                 goto exit_device_put;
 893         }
 894 
 895         err = platform_device_add(pdev);
 896         if (err) {
 897                 pr_err("Device addition failed (%d)\n", err);
 898                 goto exit_device_put;
 899         }
 900 
 901         return 0;
 902 
 903 exit_device_put:
 904         platform_device_put(pdev);
 905 exit:
 906         return err;
 907 }
 908 
 909 static int __init sm_smsc47m1_init(void)
 910 {
 911         int err;
 912         unsigned short address;
 913         struct smsc47m1_sio_data sio_data;
 914 
 915         err = smsc47m1_find(&sio_data);
 916         if (err < 0)
 917                 return err;
 918         address = err;
 919 
 920         /* Sets global pdev as a side effect */
 921         err = smsc47m1_device_add(address, &sio_data);
 922         if (err)
 923                 return err;
 924 
 925         err = platform_driver_probe(&smsc47m1_driver, smsc47m1_probe);
 926         if (err)
 927                 goto exit_device;
 928 
 929         return 0;
 930 
 931 exit_device:
 932         platform_device_unregister(pdev);
 933         smsc47m1_restore(&sio_data);
 934         return err;
 935 }
 936 
 937 static void __exit sm_smsc47m1_exit(void)
 938 {
 939         platform_driver_unregister(&smsc47m1_driver);
 940         smsc47m1_restore(dev_get_platdata(&pdev->dev));
 941         platform_device_unregister(pdev);
 942 }
 943 
 944 MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
 945 MODULE_DESCRIPTION("SMSC LPC47M1xx fan sensors driver");
 946 MODULE_LICENSE("GPL");
 947 
 948 module_init(sm_smsc47m1_init);
 949 module_exit(sm_smsc47m1_exit);
/* [<][>][^][v][top][bottom][index][help] */
root/drivers/hwmon/smsc47m1.c

DEFINITIONS
