root/arch/mips/include/asm/octeon/cvmx-helper.h

/* [<][>][^][v][top][bottom][index][help] */

INCLUDED FROM


   1 /***********************license start***************
   2  * Author: Cavium Networks
   3  *
   4  * Contact: support@caviumnetworks.com
   5  * This file is part of the OCTEON SDK
   6  *
   7  * Copyright (c) 2003-2008 Cavium Networks
   8  *
   9  * This file is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License, Version 2, as
  11  * published by the Free Software Foundation.
  12  *
  13  * This file is distributed in the hope that it will be useful, but
  14  * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
  15  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
  16  * NONINFRINGEMENT.  See the GNU General Public License for more
  17  * details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this file; if not, write to the Free Software
  21  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  22  * or visit http://www.gnu.org/licenses/.
  23  *
  24  * This file may also be available under a different license from Cavium.
  25  * Contact Cavium Networks for more information
  26  ***********************license end**************************************/
  27 
  28 /*
  29  *
  30  * Helper functions for common, but complicated tasks.
  31  *
  32  */
  33 
  34 #ifndef __CVMX_HELPER_H__
  35 #define __CVMX_HELPER_H__
  36 
  37 #include <asm/octeon/cvmx-config.h>
  38 #include <asm/octeon/cvmx-fpa.h>
  39 #include <asm/octeon/cvmx-wqe.h>
  40 
  41 typedef enum {
  42         CVMX_HELPER_INTERFACE_MODE_DISABLED,
  43         CVMX_HELPER_INTERFACE_MODE_RGMII,
  44         CVMX_HELPER_INTERFACE_MODE_GMII,
  45         CVMX_HELPER_INTERFACE_MODE_SPI,
  46         CVMX_HELPER_INTERFACE_MODE_PCIE,
  47         CVMX_HELPER_INTERFACE_MODE_XAUI,
  48         CVMX_HELPER_INTERFACE_MODE_SGMII,
  49         CVMX_HELPER_INTERFACE_MODE_PICMG,
  50         CVMX_HELPER_INTERFACE_MODE_NPI,
  51         CVMX_HELPER_INTERFACE_MODE_LOOP,
  52 } cvmx_helper_interface_mode_t;
  53 
  54 typedef union {
  55         uint64_t u64;
  56         struct {
  57                 uint64_t reserved_20_63:44;
  58                 uint64_t link_up:1;         /**< Is the physical link up? */
  59                 uint64_t full_duplex:1;     /**< 1 if the link is full duplex */
  60                 uint64_t speed:18;          /**< Speed of the link in Mbps */
  61         } s;
  62 } cvmx_helper_link_info_t;
  63 
  64 #include <asm/octeon/cvmx-helper-errata.h>
  65 #include <asm/octeon/cvmx-helper-loop.h>
  66 #include <asm/octeon/cvmx-helper-npi.h>
  67 #include <asm/octeon/cvmx-helper-rgmii.h>
  68 #include <asm/octeon/cvmx-helper-sgmii.h>
  69 #include <asm/octeon/cvmx-helper-spi.h>
  70 #include <asm/octeon/cvmx-helper-util.h>
  71 #include <asm/octeon/cvmx-helper-xaui.h>
  72 
  73 /**
  74  * This function enables the IPD and also enables the packet interfaces.
  75  * The packet interfaces (RGMII and SPI) must be enabled after the
  76  * IPD.  This should be called by the user program after any additional
  77  * IPD configuration changes are made if CVMX_HELPER_ENABLE_IPD
  78  * is not set in the executive-config.h file.
  79  *
  80  * Returns 0 on success
  81  *         -1 on failure
  82  */
  83 extern int cvmx_helper_ipd_and_packet_input_enable(void);
  84 
  85 /**
  86  * Initialize the PIP, IPD, and PKO hardware to support
  87  * simple priority based queues for the ethernet ports. Each
  88  * port is configured with a number of priority queues based
  89  * on CVMX_PKO_QUEUES_PER_PORT_* where each queue is lower
  90  * priority than the previous.
  91  *
  92  * Returns Zero on success, non-zero on failure
  93  */
  94 extern int cvmx_helper_initialize_packet_io_global(void);
  95 
  96 /**
  97  * Does core local initialization for packet io
  98  *
  99  * Returns Zero on success, non-zero on failure
 100  */
 101 extern int cvmx_helper_initialize_packet_io_local(void);
 102 
 103 /**
 104  * Returns the number of ports on the given interface.
 105  * The interface must be initialized before the port count
 106  * can be returned.
 107  *
 108  * @interface: Which interface to return port count for.
 109  *
 110  * Returns Port count for interface
 111  *         -1 for uninitialized interface
 112  */
 113 extern int cvmx_helper_ports_on_interface(int interface);
 114 
 115 /**
 116  * Return the number of interfaces the chip has. Each interface
 117  * may have multiple ports. Most chips support two interfaces,
 118  * but the CNX0XX and CNX1XX are exceptions. These only support
 119  * one interface.
 120  *
 121  * Returns Number of interfaces on chip
 122  */
 123 extern int cvmx_helper_get_number_of_interfaces(void);
 124 
 125 /**
 126  * Get the operating mode of an interface. Depending on the Octeon
 127  * chip and configuration, this function returns an enumeration
 128  * of the type of packet I/O supported by an interface.
 129  *
 130  * @interface: Interface to probe
 131  *
 132  * Returns Mode of the interface. Unknown or unsupported interfaces return
 133  *         DISABLED.
 134  */
 135 extern cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int
 136                                                                    interface);
 137 
 138 /**
 139  * Return the link state of an IPD/PKO port as returned by
 140  * auto negotiation. The result of this function may not match
 141  * Octeon's link config if auto negotiation has changed since
 142  * the last call to cvmx_helper_link_set().
 143  *
 144  * @ipd_port: IPD/PKO port to query
 145  *
 146  * Returns Link state
 147  */
 148 extern cvmx_helper_link_info_t cvmx_helper_link_get(int ipd_port);
 149 
 150 /**
 151  * Configure an IPD/PKO port for the specified link state. This
 152  * function does not influence auto negotiation at the PHY level.
 153  * The passed link state must always match the link state returned
 154  * by cvmx_helper_link_get().
 155  *
 156  * @ipd_port:  IPD/PKO port to configure
 157  * @link_info: The new link state
 158  *
 159  * Returns Zero on success, negative on failure
 160  */
 161 extern int cvmx_helper_link_set(int ipd_port,
 162                                 cvmx_helper_link_info_t link_info);
 163 
 164 /**
 165  * This function probes an interface to determine the actual
 166  * number of hardware ports connected to it. It doesn't setup the
 167  * ports or enable them. The main goal here is to set the global
 168  * interface_port_count[interface] correctly. Hardware setup of the
 169  * ports will be performed later.
 170  *
 171  * @interface: Interface to probe
 172  *
 173  * Returns Zero on success, negative on failure
 174  */
 175 extern int cvmx_helper_interface_probe(int interface);
 176 extern int cvmx_helper_interface_enumerate(int interface);
 177 
 178 #endif /* __CVMX_HELPER_H__ */

/* [<][>][^][v][top][bottom][index][help] */