root/arch/mips/pci/fixup-fuloong2e.c

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. pcibios_map_irq
  2. pcibios_plat_dev_init
  3. loongson2e_nec_fixup
  4. loongson2e_686b_func0_fixup
  5. loongson2e_686b_func1_fixup
  6. loongson2e_686b_func2_fixup
  7. loongson2e_686b_func3_fixup
  8. loongson2e_686b_func5_fixup

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Copyright (C) 2004 ICT CAS
   4  * Author: Li xiaoyu, ICT CAS
   5  *   lixy@ict.ac.cn
   6  *
   7  * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
   8  * Author: Fuxin Zhang, zhangfx@lemote.com
   9  */
  10 #include <linux/init.h>
  11 #include <linux/pci.h>
  12 
  13 #include <loongson.h>
  14 
  15 /* South bridge slot number is set by the pci probe process */
  16 static u8 sb_slot = 5;
  17 
  18 int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
  19 {
  20         int irq = 0;
  21 
  22         if (slot == sb_slot) {
  23                 switch (PCI_FUNC(dev->devfn)) {
  24                 case 2:
  25                         irq = 10;
  26                         break;
  27                 case 3:
  28                         irq = 11;
  29                         break;
  30                 case 5:
  31                         irq = 9;
  32                         break;
  33                 }
  34         } else {
  35                 irq = LOONGSON_IRQ_BASE + 25 + pin;
  36         }
  37         return irq;
  38 
  39 }
  40 
  41 /* Do platform specific device initialization at pci_enable_device() time */
  42 int pcibios_plat_dev_init(struct pci_dev *dev)
  43 {
  44         return 0;
  45 }
  46 
  47 static void loongson2e_nec_fixup(struct pci_dev *pdev)
  48 {
  49         unsigned int val;
  50 
  51         /* Configures port 1, 2, 3, 4 to be validate*/
  52         pci_read_config_dword(pdev, 0xe0, &val);
  53         pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x4);
  54 
  55         /* System clock is 48-MHz Oscillator. */
  56         pci_write_config_dword(pdev, 0xe4, 1 << 5);
  57 }
  58 
  59 static void loongson2e_686b_func0_fixup(struct pci_dev *pdev)
  60 {
  61         unsigned char c;
  62 
  63         sb_slot = PCI_SLOT(pdev->devfn);
  64 
  65         printk(KERN_INFO "via686b fix: ISA bridge\n");
  66 
  67         /*  Enable I/O Recovery time */
  68         pci_write_config_byte(pdev, 0x40, 0x08);
  69 
  70         /*  Enable ISA refresh */
  71         pci_write_config_byte(pdev, 0x41, 0x01);
  72 
  73         /*  disable ISA line buffer */
  74         pci_write_config_byte(pdev, 0x45, 0x00);
  75 
  76         /*  Gate INTR, and flush line buffer */
  77         pci_write_config_byte(pdev, 0x46, 0xe0);
  78 
  79         /*  Disable PCI Delay Transaction, Enable EISA ports 4D0/4D1. */
  80         /* pci_write_config_byte(pdev, 0x47, 0x20); */
  81 
  82         /*
  83          *  enable PCI Delay Transaction, Enable EISA ports 4D0/4D1.
  84          *  enable time-out timer
  85          */
  86         pci_write_config_byte(pdev, 0x47, 0xe6);
  87 
  88         /*
  89          * enable level trigger on pci irqs: 9,10,11,13
  90          * important! without this PCI interrupts won't work
  91          */
  92         outb(0x2e, 0x4d1);
  93 
  94         /*  512 K PCI Decode */
  95         pci_write_config_byte(pdev, 0x48, 0x01);
  96 
  97         /*  Wait for PGNT before grant to ISA Master/DMA */
  98         pci_write_config_byte(pdev, 0x4a, 0x84);
  99 
 100         /*
 101          * Plug'n'Play
 102          *
 103          *  Parallel DRQ 3, Floppy DRQ 2 (default)
 104          */
 105         pci_write_config_byte(pdev, 0x50, 0x0e);
 106 
 107         /*
 108          * IRQ Routing for Floppy and Parallel port
 109          *
 110          *  IRQ 6 for floppy, IRQ 7 for parallel port
 111          */
 112         pci_write_config_byte(pdev, 0x51, 0x76);
 113 
 114         /* IRQ Routing for serial ports (take IRQ 3 and 4) */
 115         pci_write_config_byte(pdev, 0x52, 0x34);
 116 
 117         /*  All IRQ's level triggered. */
 118         pci_write_config_byte(pdev, 0x54, 0x00);
 119 
 120         /* route PIRQA-D irq */
 121         pci_write_config_byte(pdev, 0x55, 0x90);        /* bit 7-4, PIRQA */
 122         pci_write_config_byte(pdev, 0x56, 0xba);        /* bit 7-4, PIRQC; */
 123                                                         /* 3-0, PIRQB */
 124         pci_write_config_byte(pdev, 0x57, 0xd0);        /* bit 7-4, PIRQD */
 125 
 126         /* enable function 5/6, audio/modem */
 127         pci_read_config_byte(pdev, 0x85, &c);
 128         c &= ~(0x3 << 2);
 129         pci_write_config_byte(pdev, 0x85, c);
 130 
 131         printk(KERN_INFO"via686b fix: ISA bridge done\n");
 132 }
 133 
 134 static void loongson2e_686b_func1_fixup(struct pci_dev *pdev)
 135 {
 136         printk(KERN_INFO"via686b fix: IDE\n");
 137 
 138         /* Modify IDE controller setup */
 139         pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 48);
 140         pci_write_config_byte(pdev, PCI_COMMAND,
 141                               PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
 142                               PCI_COMMAND_MASTER);
 143         pci_write_config_byte(pdev, 0x40, 0x0b);
 144         /* legacy mode */
 145         pci_write_config_byte(pdev, 0x42, 0x09);
 146 
 147 #if 1/* play safe, otherwise we may see notebook's usb keyboard lockup */
 148         /* disable read prefetch/write post buffers */
 149         pci_write_config_byte(pdev, 0x41, 0x02);
 150 
 151         /* use 3/4 as fifo thresh hold  */
 152         pci_write_config_byte(pdev, 0x43, 0x0a);
 153         pci_write_config_byte(pdev, 0x44, 0x00);
 154 
 155         pci_write_config_byte(pdev, 0x45, 0x00);
 156 #else
 157         pci_write_config_byte(pdev, 0x41, 0xc2);
 158         pci_write_config_byte(pdev, 0x43, 0x35);
 159         pci_write_config_byte(pdev, 0x44, 0x1c);
 160 
 161         pci_write_config_byte(pdev, 0x45, 0x10);
 162 #endif
 163 
 164         printk(KERN_INFO"via686b fix: IDE done\n");
 165 }
 166 
 167 static void loongson2e_686b_func2_fixup(struct pci_dev *pdev)
 168 {
 169         /* irq routing */
 170         pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 10);
 171 }
 172 
 173 static void loongson2e_686b_func3_fixup(struct pci_dev *pdev)
 174 {
 175         /* irq routing */
 176         pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 11);
 177 }
 178 
 179 static void loongson2e_686b_func5_fixup(struct pci_dev *pdev)
 180 {
 181         unsigned int val;
 182         unsigned char c;
 183 
 184         /* enable IO */
 185         pci_write_config_byte(pdev, PCI_COMMAND,
 186                               PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
 187                               PCI_COMMAND_MASTER);
 188         pci_read_config_dword(pdev, 0x4, &val);
 189         pci_write_config_dword(pdev, 0x4, val | 1);
 190 
 191         /* route ac97 IRQ */
 192         pci_write_config_byte(pdev, 0x3c, 9);
 193 
 194         pci_read_config_byte(pdev, 0x8, &c);
 195 
 196         /* link control: enable link & SGD PCM output */
 197         pci_write_config_byte(pdev, 0x41, 0xcc);
 198 
 199         /* disable game port, FM, midi, sb, enable write to reg2c-2f */
 200         pci_write_config_byte(pdev, 0x42, 0x20);
 201 
 202         /* we are using Avance logic codec */
 203         pci_write_config_word(pdev, 0x2c, 0x1005);
 204         pci_write_config_word(pdev, 0x2e, 0x4710);
 205         pci_read_config_dword(pdev, 0x2c, &val);
 206 
 207         pci_write_config_byte(pdev, 0x42, 0x0);
 208 }
 209 
 210 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686,
 211                          loongson2e_686b_func0_fixup);
 212 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1,
 213                          loongson2e_686b_func1_fixup);
 214 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2,
 215                          loongson2e_686b_func2_fixup);
 216 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3,
 217                          loongson2e_686b_func3_fixup);
 218 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5,
 219                          loongson2e_686b_func5_fixup);
 220 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
 221                          loongson2e_nec_fixup);

/* [<][>][^][v][top][bottom][index][help] */