This source file includes following definitions.
- pcibios_plat_dev_init
- pcibios_map_irq
- pci_virtio_guest_write_config_addr
- pci_virtio_guest_write_config
- pci_virtio_guest_read_config
- pci_virtio_guest_setup
1
2
3
4
5
6
7
8
9 #include <linux/kernel.h>
10 #include <linux/init.h>
11 #include <linux/interrupt.h>
12 #include <linux/pci.h>
13
14 #include <uapi/asm/bitfield.h>
15 #include <asm/byteorder.h>
16 #include <asm/io.h>
17
18 #define PCI_CONFIG_ADDRESS 0xcf8
19 #define PCI_CONFIG_DATA 0xcfc
20
21 union pci_config_address {
22 struct {
23 __BITFIELD_FIELD(unsigned enable_bit : 1,
24 __BITFIELD_FIELD(unsigned reserved : 7,
25 __BITFIELD_FIELD(unsigned bus_number : 8,
26 __BITFIELD_FIELD(unsigned devfn_number : 8,
27 __BITFIELD_FIELD(unsigned register_number : 8,
28 )))));
29 };
30 u32 w;
31 };
32
33 int pcibios_plat_dev_init(struct pci_dev *dev)
34 {
35 return 0;
36 }
37
38 int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
39 {
40 return ((pin + slot) % 4)+ MIPS_IRQ_PCIA;
41 }
42
43 static void pci_virtio_guest_write_config_addr(struct pci_bus *bus,
44 unsigned int devfn, int reg)
45 {
46 union pci_config_address pca = { .w = 0 };
47
48 pca.register_number = reg;
49 pca.devfn_number = devfn;
50 pca.bus_number = bus->number;
51 pca.enable_bit = 1;
52
53 outl(pca.w, PCI_CONFIG_ADDRESS);
54 }
55
56 static int pci_virtio_guest_write_config(struct pci_bus *bus,
57 unsigned int devfn, int reg, int size, u32 val)
58 {
59 pci_virtio_guest_write_config_addr(bus, devfn, reg);
60
61 switch (size) {
62 case 1:
63 outb(val, PCI_CONFIG_DATA + (reg & 3));
64 break;
65 case 2:
66 outw(val, PCI_CONFIG_DATA + (reg & 2));
67 break;
68 case 4:
69 outl(val, PCI_CONFIG_DATA);
70 break;
71 }
72
73 return PCIBIOS_SUCCESSFUL;
74 }
75
76 static int pci_virtio_guest_read_config(struct pci_bus *bus, unsigned int devfn,
77 int reg, int size, u32 *val)
78 {
79 pci_virtio_guest_write_config_addr(bus, devfn, reg);
80
81 switch (size) {
82 case 1:
83 *val = inb(PCI_CONFIG_DATA + (reg & 3));
84 break;
85 case 2:
86 *val = inw(PCI_CONFIG_DATA + (reg & 2));
87 break;
88 case 4:
89 *val = inl(PCI_CONFIG_DATA);
90 break;
91 }
92 return PCIBIOS_SUCCESSFUL;
93 }
94
95 static struct pci_ops pci_virtio_guest_ops = {
96 .read = pci_virtio_guest_read_config,
97 .write = pci_virtio_guest_write_config,
98 };
99
100 static struct resource pci_virtio_guest_mem_resource = {
101 .name = "Virtio MEM",
102 .flags = IORESOURCE_MEM,
103 .start = 0x10000000,
104 .end = 0x1dffffff
105 };
106
107 static struct resource pci_virtio_guest_io_resource = {
108 .name = "Virtio IO",
109 .flags = IORESOURCE_IO,
110 .start = 0,
111 .end = 0xffff
112 };
113
114 static struct pci_controller pci_virtio_guest_controller = {
115 .pci_ops = &pci_virtio_guest_ops,
116 .mem_resource = &pci_virtio_guest_mem_resource,
117 .io_resource = &pci_virtio_guest_io_resource,
118 };
119
120 static int __init pci_virtio_guest_setup(void)
121 {
122 pr_err("pci_virtio_guest_setup\n");
123
124
125 pci_set_flags(PCI_PROBE_ONLY);
126
127 pci_virtio_guest_controller.io_map_base = mips_io_port_base;
128 register_pci_controller(&pci_virtio_guest_controller);
129 return 0;
130 }
131 arch_initcall(pci_virtio_guest_setup);